to pass up!
I believe, and so do others, that Greenchek Technology Inc GCHK could be at
least 10 times undervalued right now and think readers should be picking this
one up while it?s under $2.00 per share. ( Analyst Victor Sula, Ph. D. picked
GCHK to go to $3.42 in his report back
I just got an external USB drive that I want to use for disk-based
backups. It is important that this drive be useable on different FreeBSD
servers that we have.
I got it working on a test server ok, but I noticed that the sysinstall
utility labeled the device as:
/dev/da0s1d
Since the test
On Wed, 22 Nov 2006, Christopher Sean Hilton wrote:
In all likelyhood FreeBSD needs some quirk to work with the IDE bridge
chipset in your enclosure. I have noticed that the plain jane enclosures
seem to work fine but the ones with special features fail. In particular
I have an enclosure with
with the USB drive plugged in.
It gets hung up on Waiting 5 seconds for SCSI devices to settle. If I
unplug the drive, it immediately finishes booting ok. If I then plug it
back in, I get this:
Nov 21 12:17:23 amanda kernel: umass0: VIA Technologies Inc. USB 2.0 IDE
Bridge, rev 2.00/0.03
Because that's what pw is for...you don't need to worry about accidentally
deleting a colon, for example. A script using pw would also be a huge
timesaver over manually editing hundreds of entries, I'd think as well.
Of course, sed can do it even quicker, but with the same risks.
On Tue, 10 Oct
Can anyone verify that the LSI0100 PCI-X SAS RAID card will work with
6.X-STABLE? The mfi driver says it supports LSI SAS MegaRAID, but this
isn't in the MegaRAID family (only does RAID 0 and 1, and I only need 1).
All experiences appreciated...please reply directly as I am not
subscribed.
I would not recommend using vipw or sed to change your users' shells.
I'd just create a file of users:
cat /etc/passwd | cut -f1 -d: userlist
(Edit out any users you don't want to include):
then a scipt using pw to change their shells
#!/bin/sh
user=`awk '{print $1}' ./userlist`
for user
with a properly set up Maildir (plus
.qmail, public_html or anything else you want) and edit those tags to suit
your requirements.
HTH,
James Smallacombe PlantageNet, Inc. CEO and Janitor
[EMAIL PROTECTED]
http://3.am
On Mon, 9 Oct 2006 [EMAIL PROTECTED] wrote:
Can anyone verify that the LSI0100 PCI-X SAS RAID card will work with
6.X-STABLE? The mfi driver says it supports LSI SAS MegaRAID, but this
isn't in the MegaRAID family (only does RAID 0 and 1, and I only need 1).
All experiences
Hi:
I'm trying to recompile a 6.2-PRERELEASE kernel without USB support.
After commenting out the USB devices in the kernel config file, and doing
a make cleandepend in the kernel source directory, I get this when
trying to do a make depend:
(excerpt):
rm -f .newdep
make -V CFILES -V
Please disregard, I was in the wrong source tree :-/
On Thu, 5 Oct 2006 [EMAIL PROTECTED] wrote:
Hi:
I'm trying to recompile a 6.2-PRERELEASE kernel without USB support.
After commenting out the USB devices in the kernel config file, and doing
a make cleandepend in the kernel source
(Please respond directly, as I am not subscribed)
I've asked about this error message before, but this has gotten serious.
Not sure if it's related, but this server keeps spontaneously having what
appear to be power events every 13-40 hours or so. No errors or panic
messages or core dumps.
The
rebooting?
Spontaneously rebooting. NOT cleanly, but so far, it has come back up
every time. I'm not sure how high the risk is for serious file system
damage in this situation, but it sure makes me nervous.
James Smallacombe PlantageNet, Inc. CEO and Janitor
[EMAIL PROTECTED
and for no cause that I can find, it reboots
itself roughly twice a day. Nothing in the syslog or console log, it
looks basically like a power event...system comes back up with uncleanly
dismounted file systems. However, it is on very clean power, has dual
power supplies and none of the other
Having just migrated a server from 4.10-STABLE to 6.1-STABLE, I'm curious
about some kernel messages in dmesg that I hadn't seen before:
asr0: [GIANT-LOCKED] (adaptec RAID adapter)
uhci0: [GIANT-LOCKED] (USB driver)
atkbd0: [GIANT-LOCKED] (keyboard driver)
I'm running SMP with 2 CPUs...a
Hi:
I'm in the process of doing a clean install on an older server that was
running 4.10-STABLE to 6.1-STABLE. For the most part, it's been smooth,
but I have a few questions:
On boot, I get a couple of kernel messages that don't look optimal, and I
just want to make sure there's no cause for
I'm getting the following errors when trying to mount volumes via NFS
between to FBSD 6.1-STABLE machines:
Aug 29 14:20:41 host mountd[1587]: can't export /usr
Aug 29 14:20:41 host mountd[1587]: bad exports list line /usr -ro -maproot
Aug 29 14:20:41 host mountd[1587]: can't export /var
Aug 29
On Tue, 29 Aug 2006, Bill Moran wrote:
In response to [EMAIL PROTECTED]:
I'm getting the following errors when trying to mount volumes via NFS
between to FBSD 6.1-STABLE machines:
Aug 29 14:20:41 host mountd[1587]: can't export /usr
Aug 29 14:20:41 host mountd[1587]: bad exports
On Tue, 29 Aug 2006, Jonathan Horne wrote:
On Tue, 29 Aug 2006, Bill Moran wrote:
In response to [EMAIL PROTECTED]:
I'm getting the following errors when trying to mount volumes via NFS
between to FBSD 6.1-STABLE machines:
Aug 29 14:20:41 host mountd[1587]: can't export
On Tue, 29 Aug 2006 [EMAIL PROTECTED] wrote:
On Tue, 29 Aug 2006, Jonathan Horne wrote:
On Tue, 29 Aug 2006, Bill Moran wrote:
In response to [EMAIL PROTECTED]:
I'm getting the following errors when trying to mount volumes via NFS
between to FBSD 6.1-STABLE machines:
Hi:
I just installed FreeBSD 6.1 on a new Dell desktop that's going to act as
a temporary server while I migrate two older servers (4.10-STABLE) over to
all new software, the reconfigure it to act as a remote amanda server when
that's complete.
I've noticed a bunch of these errors in the
hi all... again...
i sent this message to general questions but nobody got excited about
it.
i just installed 6 on my t30 laptop. brand new. when trying dhclient i
get:
DHCPDISCOVER on fxp0 to 255.255.255.255 port 67 interval 5
this trys 6 times then this shows up:
No DHCPOFFERS
There was a change in DHCP between FreeBSD 5.x and 6.
I noticed the same behaviour with a couple of hw broadband routers.
AFAIR this was also reported back to the list, still no fix was
provided.
thank you... does that mean back to 5.4 for now?
this is the only system i have on the
/2/3, make stuff up [EMAIL PROTECTED]:
thank you... does that mean back to 5.4 for now?
Try install /usr/ports/net/isc-dhcp3-client/
without a connection?
try to manually ifconfig your fxp0 - this should work.
Le deagh dhùraghd,
Frank Altpeter
--
*** FA-RIPE *** http
..
and a few other intervals...
so if the fxp0 is up and the dhcp server is up then whats wrong with
dhclient?...
i'm actually writing from a machine on the same dhcp server...
thanks...
___
freebsd-questions@freebsd.org mailing list
http
Please cc replies directly to me, as I am not subscribed to the lists.
With some help from here, I was able to get this RAID card to see our
external DLT (QUANTUM 4000) SCSI tape drive by installing the aacp (pass
through) driver in addition to the aac driver. camcontrol now works, as
do basic
A few months ago I brought up a new server using an Adaptec 2200S RAID
card, and it's been running fine with a RAID 1 array on channel 0. Today
I tried to move the DLT (Quantum 4000) over to this server to make it the
amanda server, so I plugged it into the controller's external port for
channel
A few months ago I brought up a new server using an Adaptec 2200S RAID
card, and it's been running fine with a RAID 1 array on channel 0. Today
I tried to move the DLT (Quantum 4000) over to this server to make it the
amanda server, so I plugged it into the controller's external port for
channel
On Wed, 28 Jul 2004, Dan Nelson wrote:
In the last episode (Jul 28), [EMAIL PROTECTED] said:
A few months ago I brought up a new server using an Adaptec 2200S RAID
card, and it's been running fine with a RAID 1 array on channel 0. Today
I tried to move the DLT (Quantum 4000) over
On Wed, 28 Jul 2004, Dan Nelson wrote:
In the last episode (Jul 28), [EMAIL PROTECTED] said:
A few months ago I brought up a new server using an Adaptec 2200S RAID
card, and it's been running fine with a RAID 1 array on channel 0. Today
I tried to move the DLT (Quantum 4000) over
with no problems) and everything boots fine (see dmesg
below), but ubench shows about half what the performance should be and top
only shows 1 CPU running (cpu0). I'm seriously afraid I might have mucked
up one of the CPUs when I had to remove and reinstall it, but I would
think that I would see some sort
shows 1 CPU running (cpu0). I'm seriously afraid I might have mucked
up one of the CPUs when I had to remove and reinstall it, but I would
think that I would see some sort of error if that were the case. In the
BIOS you see the system processor installed, but not the application
processor
Hi:
I need to build a newer, faster FBSD server to replace one running RAID 1
with an Adaptec 2100s and have the following requirements for the RAID
card:
1 channel (2 preferable)
U320 SCSI
low profile (going into a 2RU box, want to avoid a riser)
supported by FreeBSD 4.9
I'm not particularly
Thanks for your reply, Stefan. Unfortunately, that card is U160 and is
not low profile. If I have to settle for U160, I'll probably go with
another 2100 (the low profile is more important than 2 channels), but I
figure there *has* to be a U320 RAID solution for FreeBSD, I just hope
there's a
34 matches
Mail list logo
