On 2006-01-09 15:01, n-n [EMAIL PROTECTED] wrote:
It is hoped that FreeBSD becomes a system like HP-UX.
Hopefully not.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
If I shrink an existing partition in my hard drive, then there will be empty
(unpartitioned) space in the disk. Can FreeBSD's installer create a
partition to fill this space, or do I have to have a partition there?
___
freebsd-questions@freebsd.org
On 2005-12-26 19:39, Matt Roth [EMAIL PROTECTED] wrote:
If I shrink an existing partition in my hard drive, then there will be
empty (unpartitioned) space in the disk. Can FreeBSD's installer
create a partition to fill this space, or do I have to have a
partition there?
Sure. As long as the
--
Best regards,
Chris
Almost anything is easier to get into than out of.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
/ad4s1a
The boot loader gives me two options F1 FreeBSD and F5 Unknown but
chosing either will boot FreeBSD?
Cheers, Erik
--
Ph: +34.666334818 web: www.locolomo.org
S/MIME Certificate: www.daemonsecurity.com/ca/8D03551FFCE04F06.crt
Subject ID: 9E:AA:18:E6:94:7A:91
Erik Norgaard wrote:
Andrew Falanga wrote:
I'm new to FreeBSD but not to UNIX. The guy who burned me the 6.0
release iso's told me that during the install, FreeBSD would detect
my Windows XP drive but it didn't. I have two hard drives, one for
FreeBSD one for Windows. The FreeBSD drive
This might suit your needs: http://www.raqdevil.com/
I do not know how well developed for use with freebsd this is yet. I must say
the installation instructions sounded very off putting..do not install on any
thing other than a bare system seemed to be the implication. Although I did
notice
On Saturday, 12 November 2005 at 18:07:56 -0800, Scharp Ledge wrote:
How do I delete BSD? Thanks
I don't understand the question. You might like to follow the link
below, which should explain how to ask questions.
Greg
--
When replying to this message, please copy the original recipients.
If
How do I delete BSD? Thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On 11/13/05, Scharp Ledge [EMAIL PROTECTED] wrote:
How do I delete BSD? Thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Boot up
Sunday 13 November 2005 22:49 skrev Andrew P.:
On 11/13/05, Scharp Ledge [EMAIL PROTECTED] wrote:
How do I delete BSD? Thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
hi the new website is nice. but PLEASE dont replace the
image of beastie on the homepage with the new logo. that
thing is GOD AWFUL. most people wouldn't even know what the
heck it is or what significance it has. just stick with the
REAL daemon on the homepage. please keep beastie. thank
you.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
or is it covered in dust and cat hair like mine..?
Best of luck - hope this helps,
Jim Gorski
Message: 14
Date: Mon, 07 Nov 2005 00:59:37 -0800
From: Garrett Cooper [EMAIL PROTECTED]
Subject: Re: Diagnosing reboot under load
To: freebsd-questions@freebsd.org
Message-ID: [EMAIL PROTECTED]
Content-Type: text
smoothly or is it covered in dust and cat hair like mine..?
Best of luck - hope this helps,
Jim Gorski
Message: 14
Date: Mon, 07 Nov 2005 00:59:37 -0800
From: Garrett Cooper [EMAIL PROTECTED]
Subject: Re: Diagnosing reboot under load
To: freebsd-questions@freebsd.org
Message-ID: [EMAIL PROTECTED
On Mon, Nov 07, 2005 at 07:11:42AM -0800, Micah wrote:
I cleaned out all the fans, but they weren't that dirty. I can't test
the temps while the system is under load (have to reboot and check them
in the bios).
Try xmbmon of mbmon from the/usr/ports/sysutils/xmbmon port. That should
help
Roland Smith wrote:
On Mon, Nov 07, 2005 at 07:11:42AM -0800, Micah wrote:
I cleaned out all the fans, but they weren't that dirty. I can't test
the temps while the system is under load (have to reboot and check them
in the bios).
Try xmbmon of mbmon from the/usr/ports/sysutils/xmbmon
On Mon, Nov 07, 2005 at 08:17:48AM -0800, Micah wrote:
Roland Smith wrote:
On Mon, Nov 07, 2005 at 07:11:42AM -0800, Micah wrote:
I cleaned out all the fans, but they weren't that dirty. I can't test
the temps while the system is under load (have to reboot and check them
in the bios).
Micah wrote:
Roland Smith wrote:
On Mon, Nov 07, 2005 at 07:11:42AM -0800, Micah wrote:
I cleaned out all the fans, but they weren't that dirty. I can't
test the temps while the system is under load (have to reboot and
check them in the bios).
Try xmbmon of mbmon from
Alex Zbyslaw wrote:
Micah wrote:
Roland Smith wrote:
On Mon, Nov 07, 2005 at 07:11:42AM -0800, Micah wrote:
I cleaned out all the fans, but they weren't that dirty. I can't
test the temps while the system is under load (have to reboot and
check them in the bios).
Try xmbmon of
Hello freebsd-questions,
I want to publisher FreeBsd in my town. I leave in Slavutich. It's
near the Chornobil nuclear power plant. Please, sent me CD with
latest version FreeBsd.
Maksim Skvarnik
Moskovsky 11/46
Slavutich
Kyivskya obl.
Ukraine
07100
--
Best
On Saturday, 5 November 2005 at 23:58:11 +0200, Maksim Skvarnik wrote:
Hello freebsd-questions,
I want to publisher FreeBsd in my town. I leave in Slavutich. It's
near the Chornobil nuclear power plant. Please, sent me CD with
latest version FreeBsd.
You can download it off the net.
On 11/6/05, Maksim Skvarnik [EMAIL PROTECTED] wrote:
Hello freebsd-questions,
I want to publisher FreeBsd in my town. I leave in Slavutich. It's
near the Chornobil nuclear power plant. Please, sent me CD with
latest version FreeBsd.
Maksim Skvarnik
Moskovsky 11/46
freebsd-questions@freebsd.org
CC: Michael C. Shultz [EMAIL PROTECTED]
Subject: Re: failed port upgrade to subversion-1.2.3_1
Date: Tue, 1 Nov 2005 05:21:52 -0500
Message-Id: [EMAIL PROTECTED]
In-Reply-To: [EMAIL PROTECTED]
References: [EMAIL PROTECTED]
X-Mailer: Open WebMail 1.81 20021127
X
Hello ,
Since the actual 6.0 Release is taking too long , would you suggest me
installing 6.0 RC-1 and then then 6.0 is out , can I just apply some patches
, or I should Re-makeworld everything?...
And another question , I'm on a PIII 550 with 256MB ram . I have 5.3 and
some broken libs
On 10/27/05, George Katsanos [EMAIL PROTECTED] wrote:
Hello ,
Since the actual 6.0 Release is taking too long , would you suggest me
installing 6.0 RC-1 and then then 6.0 is out , can I just apply some patches
, or I should Re-makeworld everything?...
And another question , I'm on a PIII
Hi,
I am having a problem with FreeBSD 5.3 seeing the harddrive on my new
workstation.
all the previous versions of FreeBSD = 5.1 work great. I believe that the
problem exists with the Biostar Motherboard and its BIOS and have checked
the boards
for solutions. I have seen none.
I have
Paul,
I had a similar problem a few weeks ago - mine was a failing hard drive.
While I am not a guru, I do know that you can add a swap *file* as a new
swap
device and then disable the other swap partition without rebooting.
This doesn't help you down the road too far, but it can
Hello!
Whether probably to adjust ZyXEL ADSL USB modem on FreeBSD? Any
information on adjustment of ADSL USB modems interests.
--
Best regards,
Gleb mailto:[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
Better question: How to do 1024x768 high resolution framebuffer
console with Beastie logo in the TLH Corner ?
The Penguine does this out of the box
___
freebsd-questions@freebsd.org mailing list
On 2005-09-27 08:24, Graham Bentley [EMAIL PROTECTED] wrote:
Better question: How to do 1024x768 high resolution framebuffer
console with Beastie logo in the TLH Corner ?
I don't think that's currently possible.
The Penguine does this out of the box
That's not a very compelling argument
Graham Bentley wrote:
The Penguine does this out of the box
I suggest Crux[1] if you want to play a bit with a BSD-style operating
system, but don't miss a Linux kernel.
[1] http://www.crux.nu/
Regards
Björn
___
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
I needed a quick firewall to guard an ISDN line, so I grabbed a K6/166.
This box only came out of service a couple months ago, having run for
several years on 4.3-stable (set up some time in 2001).
The NIC card that is in it is an ISA bus card, a WD8003 (it was operating
as ed0 in its
On September 19, 2005 01:57 pm, mailtrail wrote:
I needed a quick firewall to guard an ISDN line, so I grabbed a K6/166.
This box only came out of service a couple months ago, having run for
several years on 4.3-stable (set up some time in 2001).
The NIC card that is in it is an ISA bus card,
On Sep 19, 2005, at 2:05 PM, Ean Kingston wrote:
en ed0
Interface ed0 (someone correct me if I'm wrong it's been a while)
I believe en means enable, just as di means disable.
This controls whether the kernel probes for the device.
--
-Chuck
___
Help pls
FreeBSD 5.3 sshd _security_path: cannot stat /etc/login.conf:
Regard Van
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Vanik abazyan wrote:
Help pls
FreeBSD 5.3 sshd _security_path: cannot stat /etc/login.conf:
Regard Van
Please show the output of `ls -l /etc/l*`.
Kevin Kinsey
___
freebsd-questions@freebsd.org mailing list
On Thursday 01 September 2005 15:34, Yuan Jue wrote:
im a student who study computer science and do an assignment about ur
freeBSD operating system...can i get some information about file management
of freeBSD? Hope ur can kindly help n send those details to methanks
here!!! If can, please
During the Freebsd installation the following
messages appeared:
package qt-3.2.1 aborted . Error code 1
dependent package qt-3.2.1 failed
dependent package arts-1.1.4,1 failed
I tried again and exactly the same messages appeared
and as a result i cannot start KDE.
What's the problem? How can i
im a student who study computer science and do an assignment about ur freeBSD
operating system...can i get some information about file management of freeBSD?
Hope ur can kindly help n send those details to methanks here!!! If can,
please send to me as fast as possible...
Have any of the programmers and other techies written or will write any
books or literature that's for sale? I would like to buy 1 or 2 books
for 6.0, and am wondering will any of the FreeBSD programmers write any
books to sell for it, or who can I look to to release material I can buy
Have any of the programmers and other techies written or will write any books
or literature that's for sale? I would like to buy 1 or 2 books for 6.0, and am
wondering will any of the FreeBSD programmers write any books to sell for it,
or who can I look to to release material I can buy to help
hi
is there anywhere i can find a 586 optimized freebsd
why dosent freebsd support reiser4 isnt this supposed to be the fastest
filesystem (www.namesys.com) for details and benchmarks
what GUI does freeBSD kde or gnome or is it CUI
___
On Sat, 27 Aug 2005 08:17:27 +1000
Bassam Batshon [EMAIL PROTECTED] wrote:
is there anywhere i can find a 586 optimized freebsd
you can set your optimise-flags in /etc/make.conf
(see /usr/share/examples/etc/make.conf)
what GUI does freeBSD kde or gnome or is it CUI
with FreeBSD you can have
Bassam Batshon wrote:
hi
hi, please, set a descriptive subject. If you can't provide a
descriptive subject, it might be because you don't know what your
problem is.
Maybe you didn't do your homework to narrow in on it? or maybe you're
just asking random questions hoping someone will do
hi
are you aware that sun has opensourced solaris10 (www.opensolaris.com) will
this in any way help the development of free bsd
solaris 10 is claimed by the makers to be the fastest operating system on
identical hardware in existence
eg
if you two identical systems one running solaris 10 the
Message: 30
Date: Sun, 21 Aug 2005 15:42:56 -0400
From: Gerard Seibert [EMAIL PROTECTED]
Subject: dk-milter installation
To: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain; charset=UTF-8
I was wondering if anyone has installed the 'dk-milter-0.3.0_1' port. I
On Aug 18, 2005, at 6:20 PM, Неверов Дмитрий wrote:
Hello, Garrett.
Networking and Filesharing.
Is it enough to configure Network, if I know IPv4 Adress, Netmask and
workgroup name?
-
You wrote:
On Aug 18, 2005, at 5:29 PM, Неверов Дмитрий wrote:
Hello FreeBSD-questions,
I'm newbie to FreeBSD, and I have a question: how can I configure
FreeBSD for work in Windows workgroup? I know my IP, and the name of
the workgroup. Is it necessary to know anything else?
Neverov D.,
[EMAIL PROTECTED]
On Aug 18, 2005, at 5:29 PM, Неверов Дмитрий wrote:
Hello FreeBSD-questions,
I'm newbie to FreeBSD, and I have a question: how can I configure
FreeBSD for work in Windows workgroup? I know my IP, and the name of
the workgroup. Is it necessary to know anything else?
Neverov D.,
[EMAIL
did you check out the handbook before you sent the email?
I dont know any specifics on what issues your having - heres a link for
the page you are looking for in the freebsd handbook
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-samba.html
hope this helps :)
-Ben
Hello.
Say how easiest to adjust please pppd.
--
Best regards,
Sergey mailto:[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
Hi All,
I´m trying to enable the hardware monitoring with lmmon on an
Intel server board, based on ICH2 chipset, but when I put the following
line in the kernel config file:
device ichsmb
I get this error messages:
In file included from /usr/src/sys/dev/ichsmb/ichsmb.c:64:
Hi!I don't have an internet connection at home so i wanna know if
therenbsp;are any places where i can download packages/distfiles with
dependencies recursively/together [e.g.: a tarred file or s.g. like that which
includes the package and all of it's dependencies](because downloading them
Bölcskei Zoltán [EMAIL PROTECTED] writes:
Hi!I don't have an internet connection at home so i wanna know if
therenbsp;are any places where i can download packages/distfiles with
dependencies recursively/together [e.g.: a tarred file or s.g. like that
which includes the package and all of
does it support wireless 802.11g
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
likely to get an answer if you
have tied to help yourself first.
Please don't forget the subject. There is a lot of traffic on this list
and mails with no subject my get ignored.
That said, the people here are quite helpful. Have fun.
Rob
___
freebsd
On 7/17/05, Emmett Lawson Jr [EMAIL PROTECTED] wrote:
does it support wireless 802.11g
http://www.freebsd.org/cgi/man.cgi?query=athsektion=4manpath=FreeBSD+5.4-RELEASE
___
freebsd-questions@freebsd.org mailing list
Access denied for user: '[EMAIL PROTECTED]' (Using password: NO)
how to do?
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
___
Mohd Radzi wrote:
Access denied for user: '[EMAIL PROTECTED]' (Using password: NO)
how to do?
Read MySQL manual. Also set Subject of your mail.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
Your message for list changelog has been forwarded to editor(s)
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
|SUB freebsd-questions|
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
i need help with my laptop its a toshiba te2100 and the screens black even
when i turn it on and have the battery cord being charged what has made this
happen? is there anything i can do to fix it?
_
REALESTATE: biggest
Hi
Is there a port of Sun's latest Netbeans IDE j2se + v 1.4.2_08 SDK WITH
Netbeans available for freebsd 5.3?
If not has anyone successfully installed Sun's package with linuxemulation? Or
are there any alternative solutions?
Thanks
David
___
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
Date: Wed, 11 May 2005 09:36:19 -0700 (PDT)
Subject: Re: pthread compiler issues
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: Kris Kennaway [EMAIL PROTECTED],[EMAIL PROTECTED],
freebsd-questions
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
Date: Wed, 11 May 2005 09:40:03 -0700 (PDT)
Subject: Re: pthread compiler issues
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: Kris Kennaway [EMAIL PROTECTED],[EMAIL PROTECTED],
freebsd-questions
asd
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Sorry for my email.. my question is: was Unable to make new root filesystem
on /dev/ad0s1a!
Command returned status 36 resolved help me please!!!
I speak bad english..sorry!! :)
___
freebsd-questions@freebsd.org mailing list
[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
mailing list
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hello,
I want to dial into a system I set up, with BSD and remove it through Command
Prompt, and reset the BSD, or remove it completely. How can I go about doing
this. Is it possible?
B. Osborne
___
freebsd-questions@freebsd.org mailing list
Mike I also tried to use only following line in install.cfg (without
the rc.conf lines)
command=passwd root system
which should not has mismatching quote errors (and I tested with
/stand/sysinstalld and it worked) but it didn't work when i put it in
install.cfg :((
John Meing
On Apr 7, 2005
On Friday 08 April 2005 02:31 am, John Meing wrote:
Mike I also tried to use only following line in install.cfg
(without the rc.conf lines)
command=passwd root system
which should not has mismatching quote errors (and I tested
with /stand/sysinstalld and it worked) but it didn't work when
Mike,
Thanks alot for your suggestion, I'll try to put these lines to a
shell script and try to make install.cfg run them. I'll post results
soon.
John Meing
On Apr 8, 2005 5:55 PM, wizlayer [EMAIL PROTECTED] wrote:
On Friday 08 April 2005 02:31 am, John Meing wrote:
Mike I also tried to use
Hi All,
I'm trying to create customized freebsd 4.11 installation CD, it is almost
done but I found some problem with customized install.cfg for sysinstall.
Here is my install.cfg
# install.cfg for sranOS v.0.1-1
# Turn on extra debugging.
debug=yes
noConfirm=YES
noWarn=NO
tcpMenuSelect
#
On Thursday 07 April 2005 07:38 am, John Meing wrote:
Dear Mike
Here are few guides i used to create this install.cfg.
http://mypage.bluewin.ch/dazdaz/freebsd_sysinstall.html
http://www.freebsd.org/cgi/man.cgi?query=sysinstallapropos=0s
ektion=0manpath=FreeBSD+4.11-RELEASEformat=html
I
On Thursday 07 April 2005 08:05 am, wizlayer wrote:
Okay, but that still doesn't work for the syntax... Going back
to
your original post:
command=echo sendmail_enable=NONE /etc/rc.conf system
would at best cause mismatching quote errors (which is what I'm
assuming you're getting?)
Hello dear friend!
Some weeks ago I bought FreeBSD 5.3 CD-ROM. But I got the problem
configuring internet connection. My ZyXEL OMNI 56K PCI Plus modem
doesn't work. I have 1100MHz AMD Duron processor with 128Mb RAM. Modem
connected to PCI slot #2. Modem based on Conexant CX11252 HSFi chipset.
I
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
[EMAIL PROTECTED] is another person who can be talked to
about this matter. He just sent me a long private mail, none of
which really indicates that anything is really happening at
Adaptec about our concerns.
___
freebsd-questions@freebsd.org mailing
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Troppo spam e virus: la casella è inattiva!
Scusate l'inconveniente.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
I have a problem with a sound card :(
Sound card : ESS Maestro 2E
Commputer : HP Omnibook XE2
FreeBSD 5.3
dmesg | grep pcm0 :
pcm0: ESS Technology Maestro-2E port 0xf800-0xf8ff irq 5 at device 14.0 on
pci0
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0:
Hi.
It seems i have the same kmem_malloc problem as some others has had in
their SMP computers that is running FreeBSD 5.3, however, it is also
different... my problem doesnt occur after an extended period of
running the server, it occurs randomly at bootup. Another difference
is that it is not a
Hi, I searched the archive to no avail on my problem altough I'm sure it's
quite simple.
I have an aureal vortex 2 sound card which I would be quite happy to use,
BUT, I'm having a hang up when installing the port 'sound/aureal-kmod'. I
get the error message:
=== aureal-kmod-1.5_5 You
On Saturday 05 March 2005 08:22 pm, Ross Penner wrote:
Hi, I searched the archive to no avail on my problem altough
I'm sure it's quite simple.
I have an aureal vortex 2 sound card which I would be quite
happy to use, BUT, I'm having a hang up when installing the
port 'sound/aureal-kmod'. I
I have the 4.11 Release installed. In handbook:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/firewalls-pf.html
is written:
All versions of the 4.X branch PF is available as
part of KAME. And I dare to ask: what KAME is (of
course from ports i could`nt install pf). Thanks.
hello
i try to compil my own kernel but i have a lot of mistakes. i verify my GENERIC
file ( MONNOYAU ) . but i didn't find any error
Could you look that and tell me what are the mistakes
i have a
pentium 3 600Mghz
ATI rage 128
sound blaster 128
tv card Philips
i don't have any network
I have a SuperMicro Motherboard X6DHE-G2 with serial ata. I am trying to
install FreeBSD 5.3.
When I boot it up from the cdrom and select Boot FreeBSD [default]. I get
an error of ata2-master: FAILURE =ATA_IDENTIFY TIMED OUT. The hard drive
is not being detected.
If I boot it up in FreeBSD
Hello,
I wish to know if freeBSD supports the usb ethernet adapter unex hu001
Tnx
Best regards,
Leandro
[EMAIL PROTECTED]
2005-02-16
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.8 - Release Date: 14/02/2005
Dear Sir/Miss,
Good day,
Thank you for bringing to us FreeBSD..
We are forming server hosting comapny and have plans for FreeBSD as our
major OS with other minor OS's but with our partner of Hsphere Contol
Panel said that FreeBSD has a problem with Java and TomCat server as:
Our Partner's
My display is to big for the monitor, I only see half of the desk top. How
do I fix this? thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
man xvidtune
[EMAIL PROTECTED] schrieb:
My display is to big for the monitor, I only see half of the desk top. How
do I fix this? thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
On Sun, Jan 30, 2005 at 05:32:40PM -0500, [EMAIL PROTECTED] wrote:
My display is to big for the monitor, I only see half of the desk top. How
do I fix this? thanks
--
You don't give much information ( which FreeBSD, are you using X
and a window manager ?), so
401 - 500 of 991 matches
Mail list logo
