FuLLBLaSTstorm [EMAIL PROTECTED] writes:
GD-2.0.35 fails to install on my production server saying that
GD_FONTS not found.
How can I solve this problem?
How were you trying to install gd?
--
Lowell Gilbert, embedded/networking software engineer, Boston area
Hello,
GD-2.0.35 fails to install on my production server saying that
GD_FONTS not found.
How can I solve this problem?
Regards,
Victor.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Hi all,
I'm sorry if this is a FAQ. I searched but couldn't find a direct
match yada yada..
I have a vanilla 6.0-RELEASE system running a bunch of network
management type tools like RANCID, nfcapd, cacti and so on.
After a few days of normal operation, the system (locked away in a
data centre)
Dale Shaw wrote:
Hi all,
I'm sorry if this is a FAQ. I searched but couldn't find a direct
match yada yada..
I have a vanilla 6.0-RELEASE system running a bunch of network
management type tools like RANCID, nfcapd, cacti and so on.
After a few days of normal operation, the system (locked away
Your last hint suggests that this is, in fact, a dns reverse resolution
issue.
Log into your server which is slow and try to resolve the ip address
of the host you trying to connect from (for instance, if you trying to
connect from
10.0.0.1 to 199.1.1.1, log into 199.1.1.1 and execute something
First, thank you to others who posted about this issue.
I altered /etc/ssh/sshd_config for UseDNS no, and noticed I get the
prompt right away, however it still takes about 15 seconds after
authentication to get a shell prompt.
This is FreeBSD version: FreeBSD 6.3-PRERELEASE #7: Sat Dec 22
Hi,
I am trying to install the em-6.6 driver (downloaded from the Intel site) into
my FreeBSD 6.0 kernel.
I followed their instructions.
After running 'make cleandepend', when I run 'make depend' I get the following
(working directory is /usr/src/sys/i386/compile/mykernel):
../../../dev/em
Using 3rd party drivers is usually a DRAG. Just update your OS!
Looks like the 6-STABLE (aka 6.3-RC1) has a newer driver.
char em_driver_version[] = Version - 6.7.3;
Rudy
Jay Aikat wrote:
Hi,
I am trying to install the em-6.6 driver (downloaded from the Intel
site) into my FreeBSD
Hi All,
Can anyone tell me whether they have experienced any problems with SSL
under Thunderbird 2.0.0.0 (20070612) on FreeBSD 6.0?
I used portupgrade to download and install the pkg the other day, along
with Firefox 2.0.0.4, I might add, and I am now unable to use SSL to
connect to my mail
Theorem [EMAIL PROTECTED] writes:
I'm having trouble setting up a new RAID5 array. It's a RocketRAID
1740 with 4x 500G disks, in RAID5 this gives approx. 1.5T of space.
It looks like it's operating properly on /dev/da0 .
Unfortunately, when I go to FDISK this via /usr/sbin/sysinstall I see
I'm having trouble setting up a new RAID5 array. It's a RocketRAID 1740 with 4x
500G disks, in RAID5 this gives approx. 1.5T of space. It looks like it's
operating properly on /dev/da0 .
Unfortunately, when I go to FDISK this via /usr/sbin/sysinstall I see the same
error over and over and
JP [EMAIL PROTECTED] writes:
So I'm not quite sure what happened here, someone with root access,
who probably shouldn't have had it managed to make a mess of things.
He claims he was trying to install source files and on reboot he
could no longer login to the system. I am able to boot into
- Original Message -
From: Lowell Gilbert [EMAIL PROTECTED]
To: JP [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Sent: Thursday, February 08, 2007 6:54 AM
Subject: Re: Can't Login at the Console on FreeBSD 6.0 Release
JP [EMAIL PROTECTED] writes:
So I'm not quite sure what
Hi Gang,
So I'm not quite sure what happened here, someone with root access, who
probably shouldn't have had it managed to make a mess of things. He claims he
was trying to install source files and on reboot he could no longer login to
the system. I am able to boot into single user
Hello list,
Well i got a Netgear WG511T (108Mbps PCMCIA Card), on an IBM laptop
(Thinkpad 600X) running FreeBSD-6.0..
it was supposed that since the card has an Atheros chipset it would be
supported from scratch
but even though, i can't even make drivers with ndisgen, getting an error
like
Hey wojtek.
Did you find a fix for this error...?
I receive this error today went i try to cp some backups files from my
server to the external hard disk(USB 2.0):
cp -P -R -v /backups/backups /ext/
After some minutes i receive this error in my console:
Nov 14 16:36:09 bacula kernel:
to may server(FreeBSD -6.0) is my version
can any body solve this problem then I will be very thankful to them.
Thanks in advance.
Dhanesh.
_
Tried the new MSN Messenger? Its cool! Download now.
http://messenger.msn.com/Download
In response to dhaneshk k [EMAIL PROTECTED]:
Hey can Any body help me?
I have a free BSD box ,due to some power failure its rebooted , but booting
failed ,
The error I got was
Trying to mount root from ufs:/dev/ad4s1a Warning : / was not properly
dismounted loading configuration
On Monday 13 November 2006 16:32, dhaneshk k wrote:
But I tried to create the new /etc/rc.conf file by the following method
#mount -o rw,remount/
#cat /etc/rc.conf
you can remount rw like this:
mount -u -w /
then use an editor to correct /etc/rc.conf
there is also /rescue which might
Sleeping thread (tid 100168, pid 56693) owns a non-sleepable lock
panic: sleeping thread
Uptime: 23h56m57s
Sleeping thread (tid 100168, pid 56693) owns a non-sleepable lock
panic: sleeping thread
Uptime: 23h56m57s
kernel trap 12 with interrupts disabled
Fatal trap 12: page fault while in kernel
I sent this to cups-bug too...
-- Forwarded message --
From: Henry Lenzi [EMAIL PROTECTED]
Date: Sep 9, 2006 2:30 AM
Subject: Can't find foomatic-rip on FreeBSD 6.0
To: [EMAIL PROTECTED]
Hello --
I am trying to get CUPS rolling on a FreeBSD 6.0 with a HP Deskjet
840C printer. I
Good Afternoon,
I have an interesting issue with FreeBSD 6.0 and MySQL 5.0. Part of my problem
has been discussed serveral times in the past on other mailing lists and it
seems there has been fixes for older versions of MySQL.
The MySQL server is currently receiving a SIGNAL 10 about once
On Monday, 31 July 2006 at 11:35:04 -0400, Erik Kristensen wrote:
I have an interesting issue with FreeBSD 6.0 and MySQL 5.0. Part of
my problem has been discussed serveral times in the past on other
mailing lists and it seems there has been fixes for older versions of
MySQL.
From what you
Thanks for the reply. I apologize, I should have been more clear with my
first paragraph in my email. I have found several other somewhat similar
problems with MySQL on FreeBSD 6.0 but with the MySQL 4.1.x series.
Nothing in the Bug report you suggested bears much resemblance at first
glance
as the control panel..
Thanks,
Rob.
Dmesg is below.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p9 #4: Thu Jun 22 14:54:15 PDT 2006
[EMAIL
PM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Thanks Ted,
Server got here, FreeBSD 6.1 went on easy as you like and then I
installed the intel card when it got here... I havent had to recompile
a thing and its detected the card fine. I've appied an IP address,
cvsup/install a few ports
[EMAIL PROTECTED];
freebsd-questions@freebsd.org
Sent: Wednesday, July 05, 2006 11:26 PM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Thanks Ted,
Server got here, FreeBSD 6.1 went on easy as you like and then I
installed the intel card when it got here... I havent had to recompile
a thing
04, 2006 2:47 AM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Ted,
Apoligises for being difficult, I must be suffering from my super
early mornings and information overload.
Thank you for explaining it, my dealer has picked up on the fact that
I'll require the PT instead of MT card that I
to /usr/src/sys/dev/em/ and recompile
the kernel.
Ted
- Original Message -
From: William [EMAIL PROTECTED]
To: Ted Mittelstaedt [EMAIL PROTECTED]
Cc: Antony Mawer [EMAIL PROTECTED];
freebsd-questions@freebsd.org
Sent: Tuesday, July 04, 2006 2:47 AM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
On 6/07/2006 4:26 PM, William wrote:
Server got here, FreeBSD 6.1 went on easy as you like and then I
installed the intel card when it got here... I havent had to recompile
a thing and its detected the card fine. I've appied an IP address,
cvsup/install a few ports without any issues..
dmesg
, July 03, 2006 10:56 AM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Did you guys say the card I've got in another box wont fit into a 320?
On 03/07/06, Antony Mawer [EMAIL PROTECTED] wrote:
On 29/06/2006 9:27 PM, Erik Trulsson wrote:
On Fri, Jun 30, 2006 at 07:56:00AM +0100, William
PROTECTED];
freebsd-questions@freebsd.org
Sent: Monday, July 03, 2006 11:05 PM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Ok, I think its best I just order a Intel MT card with the low profile
PCI-X adapter instead of flapping about with these riser cards and
then just use 6-stable. All
.
Ted
- Original Message -
From: William [EMAIL PROTECTED]
To: Ted Mittelstaedt [EMAIL PROTECTED]
Cc: Antony Mawer [EMAIL PROTECTED];
freebsd-questions@freebsd.org
Sent: Monday, July 03, 2006 11:05 PM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Ok, I think its best I just order a Intel MT
Did you guys say the card I've got in another box wont fit into a 320?
On 03/07/06, Antony Mawer [EMAIL PROTECTED] wrote:
On 29/06/2006 9:27 PM, Erik Trulsson wrote:
On Fri, Jun 30, 2006 at 07:56:00AM +0100, William wrote:
Antony,
I've got an Intel card in production already on a homebrew
@freebsd.org; Ted Mittelstaedt
[EMAIL PROTECTED]
Sent: Monday, July 03, 2006 10:56 AM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Did you guys say the card I've got in another box wont fit into a 320?
On 03/07/06, Antony Mawer [EMAIL PROTECTED] wrote:
On 29/06/2006 9:27 PM, Erik Trulsson wrote
On 29/06/2006 9:27 PM, Erik Trulsson wrote:
On Fri, Jun 30, 2006 at 07:56:00AM +0100, William wrote:
Antony,
I've got an Intel card in production already on a homebrew box, the
code is INTEL-PWLA8492MT and description is Intel Dual Port Server
Adapter 10/100/1000. Any idea if that will do?
- Original Message -
From: Antony Mawer [EMAIL PROTECTED]
To: William [EMAIL PROTECTED]
Cc: Antony Mawer [EMAIL PROTECTED]; Ted Mittelstaedt
[EMAIL PROTECTED]; freebsd-questions@freebsd.org
Sent: Thursday, June 29, 2006 11:07 PM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
On 30/06
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Will i get the updated driver by just cvsup'ing to stable once I
install -STABLE from CD?
On 30/06/06, Antony Mawer [EMAIL PROTECTED] wrote:
On 30/06/2006 4:56 PM, William wrote:
I've got an Intel card in production already on a homebrew box
How will you cvsup without a network connection?
Ted
- Original Message -
From: William [EMAIL PROTECTED]
To: Antony Mawer [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Sent: Friday, June 30, 2006 12:51 AM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Will i get the updated
, 2006 1:45 PM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Bloody good point.
On 01/07/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
How will you cvsup without a network connection?
Ted
- Original Message -
From: William [EMAIL PROTECTED]
To: Antony Mawer [EMAIL PROTECTED
Thanks for the email Antony, I'm awaiting delivery of the server so I
might have to order an intel card sharpish. What can I do the
server+fbsd 6.x to prove the lock up?
Regards,
Will
On 30/06/06, Antony Mawer [EMAIL PROTECTED] wrote:
On 23/06/2006 6:24 PM, Ted Mittelstaedt wrote:
Out of the
across the network (eg. ping another host on the network). In our case,
the machine booting at startup and the various network services starting
up was enough to do it within seconds.
I have a copy of the Intel driver we used if you are looking to run this
machine on FreeBSD 6.0 or 6.1
on the network). In our case,
the machine booting at startup and the various network services starting
up was enough to do it within seconds.
I have a copy of the Intel driver we used if you are looking to run this
machine on FreeBSD 6.0 or 6.1; the standard driver in these releases
will not support the Pro
On 30/06/2006 4:56 PM, William wrote:
I've got an Intel card in production already on a homebrew box, the
code is INTEL-PWLA8492MT and description is Intel Dual Port Server
Adapter 10/100/1000. Any idea if that will do?
The adapter you mentioned is a PCI-X adapter, which won't work unless
you
have a copy of the Intel driver we used if you are looking to run this
machine on FreeBSD 6.0 or 6.1; the standard driver in these releases
will not support the Pro/1000 PT (at least the card we used).
Regards
Antony
--
Insert your favourite quote here.
Erik Trulsson
[EMAIL PROTECTED
Will i get the updated driver by just cvsup'ing to stable once I
install -STABLE from CD?
On 30/06/06, Antony Mawer [EMAIL PROTECTED] wrote:
On 30/06/2006 4:56 PM, William wrote:
I've got an Intel card in production already on a homebrew box, the
code is INTEL-PWLA8492MT and description is
On 23/06/2006 6:24 PM, Ted Mittelstaedt wrote:
Out of the box the DL 320 G4 ships with a riser card that has 2 pci express
slots. At least that is what they are supposed to be, we haven't tried
them.
...
If you only do the pci express then the adapter you want is the Intel
Pro 1000 PT either
to a more appriopriate one.
I have a box which I'm trying to run FreeBSD on. I can run FreeBSD 5.4 on it
without any problems, but if I try run
FreeBSD 6.0 or 6.1, at any point in time while the system is running (could
be on load up or when system is already loaded),
the computer just *freezes
-master PIO4
Mounting root from ufs:/dev/ad0s2a
And yes I was using a generic kernel when using FreeBSD 6.0 and 6.1 The box
froze before I could even think of tweaking it.
Thanks for any assistance!
Tom Cruickshank
-Original Message-
From: Subhro Kar [mailto:[EMAIL PROTECTED]
Sent
Hello,
I'm hoping is the correct mailing list for this, if not, please feel
free to direct me to a more appriopriate one.
I have a box which I'm trying to run FreeBSD on. I can run FreeBSD 5.4 on it
without any problems, but if I try run
FreeBSD 6.0 or 6.1, at any point in time while
any problems, but if I try run
FreeBSD 6.0 or 6.1, at any point in time while the system is running (could
be on load up or when system is already loaded),
the computer just *freezes*. The only thing which can be done
afterwards is
a cold reboot. I hav checked the /var/log/messages
file and haven't
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Hello again,
Sorry to dig this up again. I'm in the position to order the server
now and the DL320 is within our price range. Is everyone still having
an enjoyable experience running FreeBSD on the DL3XX G4 range?
Regards,
William
On 05/05/06
.
Ted
- Original Message -
From: William [EMAIL PROTECTED]
To: Ted Mittelstaedt [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Sent: Wednesday, June 21, 2006 1:16 AM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Hello again,
Sorry to dig this up again. I'm in the position
PROTECTED]
To: Ted Mittelstaedt [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Sent: Friday, June 23, 2006 1:08 AM
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Wow thats a total pain in the arse, I'll put it through some stress
testing before it gets shipped.
Can you reccomend a card
Hello,
I've got a case where I'm writing a simply serial program to send bytes from
one system to another over a serial cable. The program works in Linux, but
when I use it in FreeBSD nothing happens. The program starts and, in the
case of receiving, waits for data to appear on the /dev/cuad1
Andy,
Did you kill the getty running on the port?
Are you getting any errors?
-Derek
At 10:28 AM 6/22/2006, Andrew Falanga wrote:
Hello,
I've got a case where I'm writing a simply serial program to send bytes from
one system to another over a serial cable. The program works in
Derek,
No I didn't disable the getty on the port. To be honest, I didn't know one
was running.
Second, the errors I'm receiving are:
sio1: 2 more silo overflows (total 9)
sio1: 280221 more tty-level buffer overflows (total 576898)
One question I have is, why would kermit able to
Your code looked OK, but I would add some debugging print statements.
silo overflow is a stack overflow, so you should figure where this is
happening.
The getty may be managing the port IO, which is why I would disable
it. Getty is listening to the port for traffic.
Depending on the OS,
On Thu, Jun 22, 2006 at 12:19:41PM -0600, Andrew Falanga wrote:
Derek,
No I didn't disable the getty on the port. To be honest, I didn't know one
was running.
Its not going to be running by default. Even if it was then it would be
on /dev/ttyd1 not /dev/cuad1. What is supposed to happen is
Unfortunately, it looks like getty isn't running on /dev/cuad1. I did the
ps command you suggest below and it apears that getty is only running on the
virtual terminals (ttyvx).
Would you have any idea what it is that kermit is doing differently that I?
Andy
On 6/22/06, Derek Ragona [EMAIL
I'm not sure I understand what you mean.
Andy
On 6/22/06, Derek Ragona [EMAIL PROTECTED] wrote:
Kermit may be manipulating the uart directly.
Unless you are not getting the uart to flush the characters. I have only
had that problem with doing low-level direct programing. Typically not a
On 6/22/06, David Kelly [EMAIL PROTECTED] wrote:
On Thu, Jun 22, 2006 at 12:19:41PM -0600, Andrew Falanga wrote:
Derek,
No I didn't disable the getty on the port. To be honest, I didn't know
one
was running.
Its not going to be running by default. Even if it was then it would be
on
On 2006-06-22 13:55, Andrew Falanga [EMAIL PROTECTED] wrote:
On 6/22/06, Derek Ragona [EMAIL PROTECTED] wrote:
Kermit may be manipulating the uart directly.
Unless you are not getting the uart to flush the characters. I have only
had that problem with doing low-level direct programing.
Let me try this again. Programing the uart directly means directly
manipulating the serial port chip. Programing in c or c++ does not usually
do this, as you normally would open the device/file and simply read or
write to it. In opening the device you need to set it to unbuffered in the
, for some reason the first nic locks the system up when you try to
bring it up.
Ted
-Original Message-
From: William [mailto:[EMAIL PROTECTED]
Sent: Friday, May 05, 2006 2:39 AM
To: Ted Mittelstaedt
Cc: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Hi Ted
#undef dcgettext
236d232
#undef textdomain
255d250
#undef bindtextdomain
274d268
#undef bind_textdomain_codeset
and a tweaking of the ./configure script because FreeBSD 6.0-REL
comes with an older version as port of the gnome-doc-utils:
$ diff configure configure.orig
2316c2316
* [EMAIL PROTECTED]:
I've successful ported Ekiga to my FreeBSD notebook from the
sources (version ekiga-2.0.2); maybe it is interesting for the
port-maintainer as well, because the port is marked as broken:
rebelion# make
=== ekiga-2.0.1_2 is marked as broken: Unknown component
* [EMAIL PROTECTED]:
El día Tuesday, June 20, 2006 a las 02:59:04PM +0200, Jean-Baptiste Quenot
escribió:
* [EMAIL PROTECTED]:
rebelion# make
=== ekiga-2.0.1_2 is marked as broken: Unknown component gnomedocutils.
No, ekiga is not currently broken. The last update occured
El día Tuesday, June 20, 2006 a las 02:59:04PM +0200, Jean-Baptiste Quenot
escribió:
* [EMAIL PROTECTED]:
I've successful ported Ekiga to my FreeBSD notebook from the
sources (version ekiga-2.0.2); maybe it is interesting for the
port-maintainer as well, because the port is marked as
El día Tuesday, June 20, 2006 a las 03:17:08PM +0200, Jean-Baptiste Quenot
escribió:
I have exactly this port version because I fetched it as tar from
the FreeBSD server:
$ fgrep Makefile,v Makefile
# $FreeBSD: ports/net/ekiga/Makefile,v 1.60 2006/04/23 10:34:03 erwin Exp $
$ make
Hello,
I had a Thinkpad 600 and a lot of problems too, especially with
networking and the cardbus. It received the impression that the chipset
of the 600 is totally broken. The revisited successor 600E doesn't make
so much trouble at all.
Add the following lines to /boot/loader.conf,
Thanks, Björn. Your information solved this problem, the networking works
correctly now.
Ah, well, I upgraded my other ThinkPad from 600 to 600E to get the 16M
colors. I guess I will have to do the same to this new machine for more
reasons...
Ad astra,
Fred Koschara
At 02:23 AM 6/6/2006,
I just purchased another ThinkPad 600 and installed FreeBSD 6.0, expecting
it would go as smoothly as had my previous installations of FreeBSD on my
Web, database and nameservers, on the desktop machine on which I'm
experimenting with FreeBSD programming, and on the Dell Latitude where
FreeBSD
Please let me know if this is not the right list to ask this.
I have a Tyan 4882 4 CPU (dual core) Opteron, running amd64 FreeBSD
6.0 Release, 8 gig ram (all recognized), SCSI 15K Seagate ST373454LC
drives. BIOS is running all stock settings.
It's job is to run Apache (ran 2.1 now latest
On May 22, 2006, at 10:46 AM, YTResearch wrote:
Please let me know if this is not the right list to ask this.
I have a Tyan 4882 4 CPU (dual core) Opteron, running amd64 FreeBSD
6.0 Release, 8 gig ram (all recognized), SCSI 15K Seagate
ST373454LC drives. BIOS is running all stock settings
There is a port for staroffice 5.2, I believe. You'd place the
staroffice bin file in the distfiles directory and make install the
port.
It should work. That's how I installed Staroffice 5.2, I'm currently
running Staroffice 7 and used the port to install it from the
Staroffice CD.
--
Rod
Dear FreeBSD:
Here is my problem description and my question.
I have a bin file for Star office 5.2. (so-5_2-ga-bin-linux-en.bin).
Somehow, a few years ago, I successfully installed it on my Linux
system.
I recently installed FreeBSD 6.0 and checked my Linux (base 8)
compatibility. Seems
, but is there any reason why
you can't install OpenOffice.org? Especially considering the fact that
SO 5.2 is _really_ old, and OpenOffice.org replaces it anyway?
I recently installed FreeBSD 6.0 and checked my Linux (base 8)
compatibility. Seems to be operating ok.
So, first I did a brandelf -t linux
in FreeBSD 6.0? How about 6.1-RC? Can we
write to that file system or only read at moment? Is it safe?
I'm trying
to find something in the /usr/src/sys/i386/conf/NOTES file but
nothing
is promising so far
http://people.freebsd.org/~yar/hfs/
add this to your kernelconfig file:
option
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of William
Sent: Wednesday, May 03, 2006 1:41 AM
To: Ted Mittelstaedt
Cc: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
The chances of getting it returned because fbsd doesnt work are
very small
Yes, for some reason the first nic locks the system up when you try to
bring it up.
Ted
-Original Message-
From: William [mailto:[EMAIL PROTECTED]
Sent: Friday, May 05, 2006 2:39 AM
To: Ted Mittelstaedt
Cc: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
Are they supported in FreeBSD 6.0? How about 6.1-RC? Can we
write to that file system or only read at moment? Is it safe? I'm
trying
to find something in the /usr/src/sys/i386/conf/NOTES file but
nothing
is promising so far
http://people.freebsd.org/~yar/hfs/
add this to your
You may get lucky and get a DL320 G4 that does not have the
specific Broadcom chip in it.
not sure, but maybe you can specify at least the chipset you
DON'T want in your order (hp should be able to figure it out
using the serial#, and this no. is on the boxes.
the order way would be: check
chipsets, and
this isn't in the FreeBSD driver.
Ted
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]@mgEDV.net
Sent: Thursday, May 04, 2006 2:55 AM
To: 'William'
Cc: freebsd-questions@freebsd.org
Subject: RE: FreeBSD 6.0 compat with DL320
: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
The chances of getting it returned because fbsd doesnt work are
very small! :(
On 03/05/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
I have a DL320 G4 in the rack and the thing panics under 6.1-RC1
when more than a few K
PROTECTED] Behalf Of William
Sent: Tuesday, May 02, 2006 3:10 AM
To: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
What was your experience like with 6.0-RELEASE and the dl320 g4? I've
had a quote back on that model so could be near to actually getting
some hardware
I have a DL320 G4 in the rack and the thing panics under 6.1-RC1
when more than a few K of data is sent over the bge interface. I
haven't tried 6.0-RELEASE on it. Just make sure you can return it
if it doesen't work.
did you ever try to install win2k/2k3 on it and apply all fw-patches
from
on it. Just make sure you can return it
if it doesen't work.
Ted
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of William
Sent: Tuesday, May 02, 2006 3:10 AM
To: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
What was your
PROTECTED]@mgEDV.net
Sent: Tuesday, May 02, 2006 7:25 AM
To: freebsd-questions@freebsd.org
Cc: 'William'
Subject: RE: FreeBSD 6.0 compat with DL320 G4
What was your experience like with 6.0-RELEASE and the dl320 g4? I've
had a quote back on that model so could be near to actually getting
some
Just an update, I checked again and our server is running
a 3.0Ghz not a 2.8Ghz pentium D.
Ted
-Original Message-
From: Ted Mittelstaedt [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 03, 2006 1:44 PM
To: freebsd-questions@freebsd.org
Cc: 'William'
Subject: RE: FreeBSD 6.0 compat
the system drive with
UFS not only at the installtion
Yousef Raffah wrote:
What is the status of reading/writing to Mac's file system (HFS)
or is
it HFS+?
it is HFS+ for Mac OS 8.1 and later
Are they supported in FreeBSD 6.0? How about 6.1-RC? Can we
write to that file system or only read
On 04 mei 2006, at 01:51, Peter A. Giessel wrote:
On 5/3/2006 15:38, FreeBSD mailing list seems to have typed:
Mac OSX can't be installed onto a UFS formatted drive as far as I
know
Most OSX programs won't run on it either
http://docs.info.apple.com/article.html?artnum=106692
*** QUOTE
giving the same error message.
Read the PR's cited, it's all there.
Ted
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]@mgEDV.net
Sent: Wednesday, May 03, 2006 1:47 AM
To: freebsd-questions@freebsd.org
Cc: 'William'
Subject: RE: FreeBSD 6.0
: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of William
Sent: Wednesday, May 03, 2006 1:41 AM
To: Ted Mittelstaedt
Cc: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.0 compat with DL320 G4
The chances of getting it returned because fbsd doesnt work are
very small! :(
On 03/05/06, Ted
What was your experience like with 6.0-RELEASE and the dl320 g4? I've
had a quote back on that model so could be near to actually getting
some hardware for once :)
On 30/04/06, [EMAIL PROTECTED]@mgEDV.net [EMAIL PROTECTED] wrote:
just for info: our dl320 g4 also has bge interfaces, and
they
What was your experience like with 6.0-RELEASE and the dl320 g4? I've
had a quote back on that model so could be near to actually getting
some hardware for once :)
we didn't really run 6.0-RELEASE on the system, as the 6.1-BETAs had
been out when we bought the server. therefore not really man
Thanks, that did the trick. I'm not running this in a jail because I'm
paranoid or anything -- I just need a test environment, and I don't
have an extra machine kicking around. :)
Patrick
On 5/1/06, David Robillard [EMAIL PROTECTED] wrote:
BIND is trying to setup a chroot(8) before it starts.
Sent: Sunday, April 30, 2006 7:58 AM
To: freebsd-questions@freebsd.org
Cc: [EMAIL PROTECTED]
Subject: RE: FreeBSD 6.0 compat with DL320 G4
just for info: our dl320 g4 also has bge interfaces, and
they work very well under 6.1-RC1 (even BETA4 was ok).
but our server has been bought 2 months ago
--
Message: 23
Date: Fri, 28 Apr 2006 19:36:22 -0600
From: Chad Leigh -- Shire.Net LLC [EMAIL PROTECTED]
Subject: Re: BIND inside a jail on FreeBSD 6.0
To: patrick [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Message-ID: [EMAIL PROTECTED]
Content-Type: text
On May 1, 2006, at 7:11 AM, David Robillard wrote:
BIND is trying to setup a chroot(8) before it starts. If you're
already inside a jail, then IMHO it is a little overkill (i.e. Running
BIND in a chroot inside a jail).
Check the BIND related values in rc.conf(5). The chroot(8) startup is
1 - 100 of 482 matches
Mail list logo
