[FW-1] Upgrade Licensing from Express to Enterprise

Hello guys I'm about to make this licensing upgrade. Are there any drawback ? Do you know where I can find some documentation about ? Thanx in advance Lorenzo = To set vacation, Out-Of-Office, or away messages, send an email to [EMAIL PROTECTED]

Re: [FW-1] Question about Static NAT with two public IPs

Thanks. I created a new node object for the external IP and put it in the rule as the Destination and then created a manual NAT rule to handle the translation. It's working as I expected. I was trying to keep from using a manual NAT rule because they sometimes seem problematic. I've never had

Re: [FW-1] Upgrade Licensing from Express to Enterprise

At 12:16 16.09.2005, you wrote: Hello guys I'm about to make this licensing upgrade. Are there any drawback ? Do you know where I can find some documentation about ? hi, vpn-1 enterprise includes floodgate and has no limits like express ... cheers reinhard Thanx in advance Lorenzo

[FW-1] Split Management Enforcement points to 2 boxes

Does anyone have a document that explains what has to be done to split the management center to a separate box? I have an IP440 that was configured for management and enforcement, and I would like to setup a splat box as the management, and just have the Nokia for enforcement. Thanks, Sean

[FW-1] clusterXL on SPLAT

Hello all Do I need to install clusterXL as a separate product from Checkpoint CD or can I choose while installing SVfoundation and fw1 in order to achieve HA. Or do I only need to install the license for Clusterxl features. Kind regards Tauseef This e-mail and any attachments are

Re: [FW-1] clusterXL on SPLAT

hi, you don't need to install clusterXL as a separate product. cheers reinhard At 13:19 16.09.2005, you wrote: Hello all Do I need to install clusterXL as a separate product from Checkpoint CD or can I choose while installing SVfoundation and fw1 in order to achieve HA. Or do I only need to

Re: [FW-1] Redistribute Static Route in SecurePlatform using Zebra RIP

Ok the instruction is not very clear. here is a more detail one: 1) edit the /etc/zebra/daemons.conf and modify: old: ZEBRA=0 OSPF=0 BGP=0 RIP=0 new: ZEBRA=1 OSPF=0 BGP=0 RIP=1 2) edit the /etc/zebra/ripd.conf and put in this line: router rip redistribute static 3) from expert mode:

Re: [FW-1] NGX SmartCenter - Minimum hw requirement

Thanks for the reply. I only have 6 enforcement modules on this mgmt server so I should be OK then. Thanks again for your help. -ms -Original Message- From: cisco4ng [mailto:[EMAIL PROTECTED] Sent: Thursday, September 15, 2005 9:23 PM To: Mailing list for discussion of Firewall-1 Cc:

Re: [FW-1] Simplified Traditional VPN

Your answer confirms my worst fears. Support has expired on my firewall and I think I might have to pay for help with it. I've inserted the reasons below. Thanks, though, for the help so far. Bob Grabbe [EMAIL PROTECTED] - Original Message - From: Lino Eduardo Avila Rodríguez [EMAIL

[FW-1] FW-1 Installation

Hello all! I have a FW-1 NG in a Distributed Deployment(two servers) and i will migrate this FW-1 to NGX version in Standalone Deployment (in a different server). My doubt is: - In FW-1 NG i have two Checkpoint Objects. One for the manager and one for the enforcement module. (two servers) -

Re: [FW-1] Simplified Traditional VPN

Thank you all for the replies on this. The problem is I think I've done pretty much everything as suggested (apart from upgrading to the latest version - the box is relatively new, and the version is 5.0.73x). I manage the box and the box logs to the management server but when trying to

[FW-1] Block LimeWire and similar P2P

I have checkpoint FW NG AI R55.I need to find some reference material on blocking LimeWire and other similar P2P for our student domain. I would appreciate any suggestions. Thank you. Deborah James Sr Network Technician Richard Bland College Information Technology Services (804) 862 6259

Re: [FW-1] FW-1 Installation

when u install the fw-1 in standalone mode... it has only one object which has mgmt and firewall components installed on them and it is automatically created... u will see it once u connect from a dashboard client to mgmt ... I would recommend to have separate boxes for mgmt and

[FW-1] RES: [FW-1] FW-1 Installation

Thanks for helping!! i installed and i saw the object with the following installed components.They are: - Firewall - VPN - Primary SmartCenter Server - SVN Foundation - Log Server - Eventia Reporter - SmartView Monitor The components appear exactly with the name above.for instance,