On 2022-11-25 13:08, p...@xvalheru.org wrote:
Hi,
after packages full update NetworkManager is in inactive state
(rc-status). The NM version is 1.40.2. I've search web but without
luck. Can someone give me a hint how to fix it?
Thanks
Pat
Hi,
Sorry for this post. It turns out
Hi,
after packages full update NetworkManager is in inactive state
(rc-status). The NM version is 1.40.2. I've search web but without luck.
Can someone give me a hint how to fix it?
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
=824066
emerge --info '=www-client/seamonkey-2.53.9.1-r1::gentoo'
[...]
dev-lang/rust: 1.56.1::gentoo
dev-lang/rust-bin: 1.53.0::gentoo
[...]
Of these two versions, it's trying to use 1.56.1, if I'm reading your
build log correctly.
Thanks, it helped.
Pat
than zswap will take advantage of.
LMP
Thanks to all for hints. I've created a swap partition.
Pat
Freehosting PIPNI - http://www.pipni.cz/
hibernating the system to disk. And what should be the size od the swap
same as RAM or bigger?
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
d/net):
dhcpcd_enp0s3=""
config_enp0s8="192.168.56.13/24"
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
c example file itself:
/usr/share/doc/netifrc-0.7.3/net.example.bz2
In there you can see how to configure with a static IP or dhcp each
interface
in turn. Copy that to your /etc/conf.d/net and edit it as you see fit.
Ask
if you get stuck on anything specific.
to do?
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
wait
self._unregister()
File
"/usr/lib64/python3.6/site-packages/_emerge/EbuildMetadataPhase.py",
line 147, in _unregister
self.scheduler.remove_reader(self._files.ebuild)
AttributeError: 'NoneType' object has no attribute 'ebuild'
**
Please, colud someone help?
Thanks
Pat>
Did you
wait
self._unregister()
File
"/usr/lib64/python3.6/site-packages/_emerge/EbuildMetadataPhase.py",
line 147, in _unregister
self.scheduler.remove_reader(self._files.ebuild)
AttributeError: 'NoneType' object has no attribute 'ebuild'
**
Please, colud someone help?
Thanks
Pat>
Did you
usr/lib64/python3.6/site-packages/_emerge/EbuildMetadataPhase.py",
line 147, in _unregister
self.scheduler.remove_reader(self._files.ebuild)
AttributeError: 'NoneType' object has no attribute 'ebuild'
**
Please, colud someone help?
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
. Is there other UI for VirutalBox?
You need to make sure the headless use-flag is disabled and the qt5
useflag is enabled if you want the GUI.
Kind regards, tastytea
Thanks, qt5 was disabled. It works now.
Pat
Freehosting PIPNI - http://www.pipni.cz/
. Is
there other UI for VirutalBox?
Thanks
Pat
You need to be a bit more specific about what you want to do. The
"VirtualBox" command launches the VirtualBox manager. Are you saying
it didn't get installed for you? I'm not aware of any other UI for
it. I don't know if you just m
Hi,
I didn't use VirtualBox for a while and I find out that virtualbox-bin
package has dissapeard. So I've installed virtualbox 6.1.22 but there's
missing VurtualBox command to tun graphical management. Is there other
UI for VirutalBox?
Thanks
Pat
Is the system overheating?
https://en.wikipedia.org/wiki/Machine-check_exception has some links
to MCE decode programs
Hi,
I want to thank to all for suggestions. The problem was that RAM had
died. It was slow thus it made me to think that it is HDD.
Thanks again.
Pat
if those causes the freezing or not (I've saw such messages
earlier too, so I'm not sure). So, is there a good diagnostic tool to
check HW and mainly HDD? What I need to decide is if buying new HDD will
fix the issue or not.
Thanks a lot
Pat
Freehosting
is about setting for whole system.
Thanks
Pat
A simple method would be to set up the PATH for this user to prepend a
local folder,
.e.g $HOME/bin
Then copy (or symlink) the desired Python version from /usr/bin to
that
folder under
a different name (i.e. without the (full) version number
On 2018-07-10 11:22, Helmut Jarausch wrote:
On 07/10/2018 10:23:05 AM, p...@xvalheru.org wrote:
Hi,
I need to set specific python version to a user and I don't want to
set
it up for whole system. Is it possible? If so how to do it. All I
found
is about setting for whole system.
Thanks
Pat
On 2018-07-10 11:19, Alexander Kapshuk wrote:
On Tue, Jul 10, 2018 at 11:23 AM wrote:
Hi,
I need to set specific python version to a user and I don't want to
set
it up for whole system. Is it possible? If so how to do it. All I
found
is about setting for whole system.
Thanks
Pat
How
Hi,
I need to set specific python version to a user and I don't want to set
it up for whole system. Is it possible? If so how to do it. All I found
is about setting for whole system.
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
configuration + some packages, but cannot
find hints on internet.
Can someone help?
Thanks
pat
Freehosting PIPNI - http://www.pipni.cz/
?
Thanks
pat
Freehosting PIPNI - http://www.pipni.cz/
Hi,
Sorry for this offtopic, but is there a UI standalone application to
configure mouse? I'm using fluxbox and don't want to install gnome or
kde.
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
aka 'suspend to disk')
(/dev/sda2) Default resume partition
Thanks a lot this was the issue.
Pat
Freehosting PIPNI - http://www.pipni.cz/
, but cannot
find.
Thanks for help
Pat
Freehosting PIPNI - http://www.pipni.cz/
now if it's also good choice for
that
big
partition.
I've thought about zfs, but I don't need snapshots and such stuff
mostly
scaling is requirement.
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
I had a large partition with reiserfs.
Running fsck alwa
probably means nothing, lsusb shows
ID 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
The one I have is also USB3 and looks fast, but I didn't test it yet -
right now trying to setup gentoo :-)
Pat
Freehosting PIPNI - http://www.pipni.cz/
On 2017-10-05 23:01, Alan McKinnon wrote:
On 05/10/2017 21:39, p...@xvalheru.org wrote:
Hi,
I'm installing gentoo on new laptop which doesn't have eth slot. I
have
i-tec usb-eth adapter which works fine (tested on linux live
distribution).
For the first time: I've configured kernel,
for that big partition.
I've thought about zfs, but I don't need snapshots and such stuff mostly
scaling is requirement.
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
it
all to work (ifconfig lists enp0s20f0u1 interface).
But after reboot plugging in the adapter doesn't create enp0s20f0u1
interface, so the ifconfig lists only 'lo'.
Please could somebody help?
Attached is kernel config, lshw and dmesg outputs.
Thanks
Pat
n, the admins switch to ugly office 365
and help desk doesn't know about that :-(
Thanks and sorry
Pat
Freehosting PIPNI - http://www.pipni.cz/
: "Enter your password
for @@:".
Could someone help?
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
I emerge python3.4 set as active:
eselect python list
Available Python interpreters:
[1] python2.7
[2] python3.3
[3] python3.4 *
but it still complain about Multiple package instances
[ebuild U ] sys-apps/portage-2.2.20.1 [2.2.14]
PYTHON_TARGETS=python3_4* -python3_3*
!!!
I emerge python3.4 set as active:
eselect python list
Available Python interpreters:
[1] python2.7
[2] python3.3
[3] python3.4 *
but it still complain
[ebuild U ] sys-apps/portage-2.2.20.1 [2.2.14]
PYTHON_TARGETS=python3_4* -python3_3*
!!! Multiple package instances within a
On Sat, 17 Jan 2015 09:17:22 +, Markos Chandras wrote
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
On 01/17/2015 12:58 AM, walt wrote:
On 01/16/2015 09:57 AM, pat wrote:
Hi,
I need help. I'm not able to start fluxbox session from lightdm.
Couple days ago I've restarted my
and returns to
lightdm. There's an error message in the .xsession-errors:
/etc/lightdm/Xsession: line 74: /usr/bin/dbus-launch --exit-with-session
/usr/bin/ssh-agent -- startfluxbox: no such file or directory
Could some point me to solution?
Thanks
Pat
memory:8000-81ff ioport:5000(size=128)
memory:d008-d00f
I've follow the Gentoo howtos, but I didn't succeed. The kernel
configuration is attached and I want to use nouveau.
Thanks a lot for help
Pat
Freehosting PIPNI - http
There was missing active flag. Sorry for disturbing.
Pat
On 2014-07-23 09:57, p...@xvalheru.org wrote:
Hello,
I've got new HP Zbook and I'm trying to install gentoo on it, but I
have problem after reboot: BootDevice not found, install OS on hard
drive. I've turn off all UEFI BIOS
- reiserfs - /
I've followed corresponding session in the installation guide using
fdisk and grub2, but still cannot boot :-(
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
Switch from 3.12.21-gentoo-r1 to 3.15.6-gentoo fixed this problem.
Pat
On 2014-07-24 14:39, p...@xvalheru.org wrote:
Hi,
I've got new laptop and I'm not able to setup graphics card correctly
- the console and X.org are messed up. The graphics card is nVidia:
*-display
description
Hi,
Please, could someone suggest easy to use proxy server which supports SSL?
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
.
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
On Sun, 3 Mar 2013 08:39:44 +, Neil Bothwick wrote
On Sun, 3 Mar 2013 00:06:56 +0100, pat wrote:
The HW is Dell Latitude e4310. I've tried hibernation script and also
pm-hibernate script with same result (logs are included). The grub line
is: kernel /boot/kernel-3.0.35-gentoo root
Hello,
Sorry for this off topic. I want to learn how to develop UI applications using
Xlib. I've searched web, but I could not find a tutorial which will explain it
all (found some short examples). Please, could someone suggest a website or a
book?
Thanks
Pat
Sorry, should search for xlib and not x.org :-|
Pat
On Tue, 15 Jan 2013 12:55:59 +0100, pat wrote
Hello,
Sorry for this off topic. I want to learn how to develop UI
applications using Xlib. I've searched web, but I could not find a
tutorial which will explain it all (found some
On Fri, 7 Sep 2012 00:14:00 -0400, Walter Dnes wrote
On Thu, Sep 06, 2012 at 02:13:04PM +0100, pat wrote
On Thu, 6 Sep 2012 14:00:22 +0100, Neil Bothwick wrote
Please post contents of /etc/conf.d/net
--
Neil Bothwick
Top Oxymorons Number 5: Twelve-ounce pound cake
: waiting for net.eth0
(51); where the 51 is a time which decrements to 0.
I've searched net, but without success :-\
Can someone help me? The installation is fresh one.
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
On Thu, 6 Sep 2012 14:10:21 +0200, Michael Hampicke wrote
2012/9/6 pat p...@xvalheru.org
Hello,
I#39;ve installed Gentoo into VirtualBox. I want it to has static IP address
and
I#39;ve followed Hand book instructions and the OpenRC/net.example. After
reboot
there#39;s a warning: WARNING
On Thu, 6 Sep 2012 14:00:22 +0100, Neil Bothwick wrote
On Thu, 6 Sep 2012 13:21:43 +0100, pat wrote:
Yes, I did. When the Gentoo boots to shell there's only loop back
interface.
Please post contents of /etc/conf.d/net
--
Neil Bothwick
Top Oxymorons Number 5: Twelve-ounce pound
overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
and I didn't compile driver as module but into kernel and when I switch to
dynamic IP address it works OK, so this is (probably) not issue of the driver.
Pat
On Thu, 6 Sep 2012 08:37:33 -0700, Mark Knecht wrote
On Thu, Sep 6, 2012 at 4:33 AM, pat p...@xvalheru.org wrote:
Hello,
I've installed Gentoo into VirtualBox. I want it to has static IP address
and
I've followed Hand book instructions and the OpenRC/net.example. After
reboot
a reasonably advanced gui.
Best regards
Peter K
Hi Peter,
I have experiences with Swing UI and I'll suggest NetBeans.
Pat
Freehosting PIPNI - http://www.pipni.cz/
On Thu, 2 Feb 2012 19:40:58 -0600, Canek Peláez Valdés wrote
On Thu, Feb 2, 2012 at 5:07 PM, Hinnerk van Bruinehsen
h.v.bruineh...@fu-berlin.de wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02.02.2012 23:03, Canek Peláez Valdés wrote:
On Thu, Feb 2, 2012 at 10:45 AM, pat p
On Wed, 01 Feb 2012 23:30:42 +0100, Hinnerk van Bruinehsen wrote
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 01.02.2012 21:33, pat wrote:
On Wed, 01 Feb 2012 09:16:18 +0100, Hinnerk van Bruinehsen wrote On
01.02.2012 00:34, pat wrote:
On Sun, 29 Jan 2012 10:34:36 +0100, pat wrote
On Thu, 02 Feb 2012 10:56:59 +0100, Hinnerk van Bruinehsen wrote
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02.02.2012 10:20, pat wrote:
On Wed, 01 Feb 2012 23:30:42 +0100, Hinnerk van Bruinehsen wrote On
01.02.2012 21:33, pat wrote:
On Wed, 01 Feb 2012 09:16:18 +0100, Hinnerk van
On Thu, 2 Feb 2012 11:28:34 +0100, pat wrote
On Thu, 02 Feb 2012 10:56:59 +0100, Hinnerk van Bruinehsen wrote
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02.02.2012 10:20, pat wrote:
On Wed, 01 Feb 2012 23:30:42 +0100, Hinnerk van Bruinehsen wrote On
01.02.2012 21:33, pat
On Wed, 01 Feb 2012 09:16:18 +0100, Hinnerk van Bruinehsen wrote
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 01.02.2012 00:34, pat wrote:
On Sun, 29 Jan 2012 10:34:36 +0100, pat wrote
On Sun, 29 Jan 2012 14:49:33 +1100, Adam Carter wrote
There were a few kernels that broke iwlagn
one too :-( I've
been using tuxonice-sources-2.6.38-r1 and it worked about 6 months ago, but
not it doesn't :-(
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
-3.0.6 (planing upgrade to 3.0.17, but only
with wireless :-) ).
Please, could someone help me? I have no idea where to start :-\
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
On Sat, 28 Jan 2012 13:46:37 +0100, Florian Philipp wrote
Am 28.01.2012 12:38, schrieb pat:
Hi,
I've used wireless network about half of a year ago. Now I need it and it
doesn't start :-( My gentoo is up to date.
I'm using network manager (and it's nm-applet).
Wireless info
On Sat, 28 Jan 2012 19:08:17 +, Mick wrote
On Saturday 28 Jan 2012 17:00:35 Canek Peláez Valdés wrote:
On Sat, Jan 28, 2012 at 6:52 AM, pat p...@xvalheru.org wrote:
On Sat, 28 Jan 2012 13:46:37 +0100, Florian Philipp wrote
Am 28.01.2012 12:38, schrieb pat:
Hi,
I've
On Sat, 28 Jan 2012 15:42:52 -0500, Michael Mol wrote
On Sat, Jan 28, 2012 at 3:31 PM, pat p...@xvalheru.org wrote:
On Sat, 28 Jan 2012 19:08:17 +, Mick wrote
On Saturday 28 Jan 2012 17:00:35 Canek Peláez Valdés wrote:
On Sat, Jan 28, 2012 at 6:52 AM, pat p...@xvalheru.org wrote
Hi all,
Sorry for this off topic post, but I've been asked how/where to find maximum
size of bash variable value. I've search and found 4M, 1k, 4k ... . But didn't
found how/where this limit is set. I know, that for C it's e.g. sizeof(int),
but for bash?
Thanks for help
Pat
On Wed, 30 Nov 2011 14:18:35 +0100, Michael Schreckenbauer wrote
Am Mittwoch, 30. November 2011, 13:19:56 schrieb pat:
Hi all,
Sorry for this off topic post, but I've been asked how/where to find maximum
size of bash variable value. I've search and found 4M, 1k, 4k ... . But
didn't
On Sun, 8 May 2011 23:28:39 +0100, Neil Bothwick wrote
On Mon, 9 May 2011 00:17:42 +0200, pat wrote:
I've bought USB scanner CanoScan LiDE210 which is listed with status
complete on sane-project. The driver backend name is genesys.
I've followed the instructions on [1]. The sane-find
On Mon, 9 May 2011 09:15:33 +0100, Neil Bothwick wrote
On Mon, 9 May 2011 08:41:04 +0200, pat wrote:
Nothing :-( Same output as for user: No scanners were identified. If
you were expecting something different, check that the scanner is
plugged in, turned on and detected by the sane-find
-libsane.rules
so, I've added the correct records, but nothing :-(
Please, could someone help?
Thanks
Pat
[1] http://en.gentoo-wiki.com/wiki/USB_Scanner
Freehosting PIPNI - http://www.pipni.cz/
On Tue, 01 Mar 2011 12:31:47 -0800, walt wrote
On 03/01/2011 11:50 AM, pat wrote:
When using X.org with intel driver there's an error in log:
FATAL: Module fbcon not found.
I know nothing about Intel graphics, but my guess is that your
kernel has no framebuffer console support. It's
On Tue, 1 Mar 2011 21:51:00 +0100, pat wrote
On Tue, 01 Mar 2011 12:31:47 -0800, walt wrote
On 03/01/2011 11:50 AM, pat wrote:
When using X.org with intel driver there's an error in log:
FATAL: Module fbcon not found.
I know nothing about Intel graphics, but my guess
is somewhere cached in
the cloned system. I've googled how to reset this cached MAC address but
without luck :-(
Please, could you help me?
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
On Sun, 27 Jun 2010 23:45:00 +0200, pat wrote
Hello,
I have running gentoo vbox guest image. I've made its clone using VBoxManage
clonehd ... and setup new vbox guest using this system copy.
Everything is same except MAC address. When starting system from
this cloned image I've got
Pat
Freehosting PIPNI - http://www.pipni.cz/
is the events are not fired and I'm afraid I've did
somethink wrong during kernel configuration - missing something :-(
Thnaks for your time.
Pat
---
Modern Hosting PIPNI - http://www.pipni.cz/
On Tue, 08 Sep 2009 00:39:25 +0200, Pat wrote
Hello,
I want to setup hal to enable me switching between two keyboard layouts.
My original configuration in xorg.conf is:
Section InputDevice
Identifier Keyboard0
Driver kbd
Option XkbModel pc104
=stringpc104/merge
merge key=input.x11_options.XkbLayout type=stringus,cz/merge
merge key=input.x11_options.XkbOptions
type=stringgrp:shifts_toggle/merge
/match
/device
I have installed hal and running hald. The xorg-server version is 1.5.3-r6.
Thanks for help
Pat
On Thu, 13 Aug 2009 09:33:09 +0200, Remy Blank wrote
Pat wrote:
I have interesting problem. When I running a video (using mplayer) and
another window partially overlap the video window the X.org crashes
(better say restarts) and the login screen appears.
The log is clean. The graphics
xorg-server-1.5.3-r6
But this starts since I've bought new laptop Dell Latitude E4300.
Thanks for help
Pat
Section ServerLayout
Identifier X.org Configured
Screen 0 Screen0 0 0
InputDeviceMouse0 CorePointer
InputDeviceKeyboard0 CoreKeyboard
: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse.c: DualPoint TouchPad at isa0060/serio1/input0 - driver resynched.
In my laptop I have track point and touch pad. In X.org I'm using only
the track point.
Thanks for help.
Pat
Section ServerLayout
Identifier
pat wrote:
On Mon, 26 Jan 2009 16:08:33 +0100, Pat wrote
Hello,
I'm using Gentoo on my laptop and quite often the graphic output goes
mad. There are messed lines and the contend is not readable. I've
made screen shots (attached). Please, could someone help me?
In the system log I've found
Thanks a lot for the help
Pat
Hello,
I've bought Dell Latitude E4300 and start to install Gentoo on it, but
the volume buttons don't work. Please, could someone give me hint where
I have to start to fix it?
Thanks a lot
Pat
P.S. kernel 2.6.26-gentoo-r4, architecture amd64
Eterm: Error: Unable to load font
-misc-fixed-medium-r-semicondensed--13-*-*-*-c-*-iso10646-1. Falling
back on k14
Eterm: FATAL: Couldn't load the fallback font either. Giving up.
Can someone help?
Thanks a lot
Pat
P.S. kernel 2.6.26-gentoo-r4, architecture amd64, X.org 7.4
On Mon, 8 Dec 2008 14:59:00 +0100, pat wrote
Hello,
I've bought a new laptop with Core 2 Duo processor which is 64 bit.
My question is if applications (see below) compiled and running over
64 bits are stable enough or if I should compile for 32 bits.
The applications are:
- Seamoneky
- VirtualBox/VMware
- Qemu
- Kerberos/OpenLDAP/OpenSSH (for these I think they are stable)
- X.org/fluxbox
- system suspending
I have 4GB RAM and I know better is to compile for 64 bits, but for me is more
important stability.
Thanks a lot
Pat
On Wed, 17 Sep 2008 21:11:29 -0300, Norberto Bensa wrote
Quoting pat [EMAIL PROTECTED]:
Hilco Wijbenga wrote:
Or my be another question :-) I need to run more then one guest OS, so
I expect I need to create next bridge, but how?
No no.. You're confusing bridges and interfaces. You make
Thanks to all !!! It works :-)
Pat
and guest.
Thanks for help
Pat
Dale wrote:
Grant Edwards wrote:
On 2008-09-05, Dale [EMAIL PROTECTED] wrote:
pat wrote:
Well, I found DontVTSwitch and set it to off in the X.org
keyboard section
but doesn't help. Is it what you have meant?
Thanks
Pat
That may be one but there is also this one
On Fri, 05 Sep 2008 17:04:14 -0500, Dale wrote
pat wrote:
Dale wrote:
Grant Edwards wrote:
On 2008-09-05, Dale [EMAIL PROTECTED] wrote:
pat wrote:
Well, I found DontVTSwitch and set it to off in the X.org
keyboard section
but doesn't help. Is it what you have meant
the version ... .
Thanks for help
Pat
the appropriate key if that
is the case and it should work. (Took me a while the first time to
figure that one out too. A little annoying when it gets pressed
accidentally.)
Ben
- Original Message
From: pat [EMAIL PROTECTED]
To: Gentoo gentoo-user@lists.gentoo.org
Sent: Thursday
the appropriate key if that is the case and it should work. (Took me a
while the first time to figure that one out too. A little annoying when it
gets pressed accidentally.)
Ben
- Original Message
From: pat [EMAIL PROTECTED]
To: Gentoo gentoo-user@lists.gentoo.org
Sent: Thursday
if
relevant.
* A complete build log is located at
'/var/tmp/portage/app-emulation/virtualbox-ose-1.6.4/temp/build.log'.
* The ebuild environment file is located at
'/var/tmp/portage/app-emulation/virtualbox-ose-1.6.4/temp/environment'.
*
Any suggestions?
Thanks
Pat
On Sun, 31 Aug 2008 06:45:14 -0500, Dale wrote
pat wrote:
Hello,
I'm trying to build virtualbox-ose, but it fails :-( I've googled but
without
luck.
Error message is:
Checking for Qt4 uic3:
** not found!
*
* ERROR: app-emulation/virtualbox-ose-1.6.4 failed
On Sun, 31 Aug 2008 14:18:56 +0200, Daniel Pielmeier wrote
pat schrieb am 31.08.2008 14:03:
make.conf
~
USE=a52 accessibility -apm acpi alsa -arts audiofile browserplugin dbus
divx4linux -directfb -doc dts dvb dvd dvdr dvdread -eds -emacs -emboss flac
gnome -kde kerberos mad
On Sun, 31 Aug 2008 14:43:03 +0200, Daniel Pielmeier wrote
pat schrieb am 31.08.2008 14:21:
On Sun, 31 Aug 2008 14:18:56 +0200, Daniel Pielmeier wrote
pat schrieb am 31.08.2008 14:03:
make.conf
~
USE=a52 accessibility -apm acpi alsa -arts audiofile browserplugin dbus
On Sun, 31 Aug 2008 14:49:14 +0200, pat wrote
On Sun, 31 Aug 2008 14:43:03 +0200, Daniel Pielmeier wrote
pat schrieb am 31.08.2008 14:21:
On Sun, 31 Aug 2008 14:18:56 +0200, Daniel Pielmeier wrote
pat schrieb am 31.08.2008 14:03:
make.conf
~
USE=a52 accessibility -apm
On Mon, 16 Jun 2008 00:51:26 +0200, Nicolas Sebrecht wrote
pat [EMAIL PROTECTED] a écrit:
So, if I use Hitachi disk in box and Seagate disk in box, I'll be
able to define their order in both ways? (udev and UUID).
Define the order is not the real problem. The problem is to be able
Hello,
Is it possible to define disk order for the USB disks? For example I have
external disk A and external disk B and I want to bundle disk A always with
/dev/sdd and disk B always with /dev/sde.
Thanks a lot
Pat
--
gentoo-user@lists.gentoo.org mailing list
On Sun, 15 Jun 2008 18:41:29 +0200, Justin wrote
Dirk Heinrichs schrieb:
Am Sonntag, 15. Juni 2008 schrieb pat:
Hello,
Is it possible to define disk order for the USB disks? For example I have
external disk A and external disk B and I want to bundle disk A always with
/dev/sdd
1 - 100 of 198 matches
Mail list logo