Re: [Gluster-users] architecture suggestions

Any idea about the Halo configuration? Didn't find any documentation about it. On Wed, Oct 17, 2018 at 1:10 AM Vlad Kopylov wrote: > if you going for redundancy go for 3 full nodes, arbiter setup seen bugs > doubt anything good will come out of using NFS > if you doing websites use VMs as

Re: [Gluster-users] one node gluster fs, volumes come up "N/A"

On Tue, Oct 16, 2018 at 6:32 AM Jarosław Prokopowski wrote: > Hello, > I'm new here. I tried to google the answer but was not successful. > To give it a try I configured one node Gluster FS with 2 volumes on CentOS > 7.5.1804. After server reboot the volumes start but are offline. Is there a >

Re: [Gluster-users] Announcing Glusterfs release 3.12.15 (Long Term Maintenance)

#1637989 : data-self-heal in arbiter volume results in stale locks. Could you tell me, please, when 4.1 with fix will be released? Thank you! 16.10.2018 19:41, Jiffin Tony Thottan пишет: The Gluster community is pleased to announce the release of

Re: [Gluster-users] architecture suggestions

if you going for redundancy go for 3 full nodes, arbiter setup seen bugs doubt anything good will come out of using NFS if you doing websites use VMs as hypervisors are using libgfapi or implement libgfapi in your app directly v On Sun, Oct 14, 2018 at 2:13 PM Oğuz Yarımtepe wrote: > Hi, >

Re: [Gluster-users] Gluster client

You can add fetch-attempts=5 to fstab, so it will try to connect more, never had an issue after this Problem might be as it might connect to the other server not the local one, starting to push all reads through the network - so close client ports on other nodes but to local v On Tue, Oct 16,

[Gluster-users] Mount a gluster volume on Mac?

What is the procedure to mount a gluster volume on a Mac? I have searched around the internet a bit but cannot find any instructions or documentation. I did find references as to how to install osxfuse - which I have done, but cannot verify as I don't know how to mount a gluster volume. Here

[Gluster-users] Announcing Glusterfs release 3.12.15 (Long Term Maintenance)

The Gluster community is pleased to announce the release of Gluster 3.12.15 (packages available at [1,2,3]). Release notes for the release can be found at [4]. Thanks, Gluster community [1] https://download.gluster.org/pub/gluster/glusterfs/3.12/3.12.15/ [2]

Re: [Gluster-users] Wrong volume size for distributed dispersed volume on 4.1.5

> If there were any directories created on the volume when the sizes were > wrong, the layouts sets on them are probably incorrect. You might want to do > a fix-layout on the volume. Hi, there wasn't any write activity on the volume lately (we just had done some crash testing with the volume

Re: [Gluster-users] Wrong volume size for distributed dispersed volume on 4.1.5

On 16 October 2018 at 20:04, wrote: > Hi, > > > > So we did a quick grep shared-brick-count > > > /var/lib/glusterd/vols/data_vol1/* > on all boxes and found that on 5 out of 6 boxes this was > shared-brick-count=0 for all bricks on remote boxes and 1 for local bricks. > > > > > > Is this the

Re: [Gluster-users] Wrong volume size for distributed dispersed volume on 4.1.5

Hi, > > So we did a quick grep shared-brick-count > > /var/lib/glusterd/vols/data_vol1/* on all boxes and found that on 5 out of > > 6 boxes this was shared-brick-count=0 for all bricks on remote boxes and 1 > > for local bricks. > > > > Is this the expected result or should we have all 1

Re: [Gluster-users] Wrong volume size for distributed dispersed volume on 4.1.5

Hi, On 16 October 2018 at 18:20, wrote: > Hi everybody, > > I have created a distributed dispersed volume on 4.1.5 under centos7 like > this a few days ago: > > gluster volume create data_vol1 disperse-data 4 redundancy 2 transport tcp > \ > \ > gf-p-d-01.isec.foobar.com:/bricks/brick1/brick

Re: [Gluster-users] Gluster client

The client was already connected to the volume so it takes the info about the nodes. I think I need to add anyway the backup-volfile-servers in the fstab so it can check at boot time. Cheers On Tue, Oct 16, 2018 at 3:29 PM wrote: > > What's the fstab equivalent? > > Hi, > > with the fuse

[Gluster-users] GlusterFS Project Update - Week 1&2 of Oct

This is a once in 2 weeks update on activities around glusterfs project [1]. This is intended to provide the community with updates on progress around key initiatives and also to reiterate current goals that the project is working towards. This is intended to help contributors to pick and address

[Gluster-users] one node gluster fs, volumes come up "N/A"

Hello, I'm new here. I tried to google the answer but was not successful. To give it a try I configured one node Gluster FS with 2 volumes on CentOS 7.5.1804. After server reboot the volumes start but are offline. Is there a way to fix that so they are online after reboot? #gluster volume status

Re: [Gluster-users] Gluster client

> What's the fstab equivalent? Hi, with the fuse client you can try the mount option backup-volfile-servers=server1:server2 This gives alternate points to ask for the volume info. Joachim - FreeMail

Re: [Gluster-users] Gluster client

On Tue, Oct 16, 2018 at 02:45:49PM +0200, Stefan Kania wrote: > Am 15.10.18 um 21:33 schrieb Alfredo De Luca: > > But what happened when NODE1 is unavailable? > The Client will only get a list of all hosts in the cluster in if one > node is down the client will take another node. You have to

[Gluster-users] Wrong volume size for distributed dispersed volume on 4.1.5

Hi everybody, I have created a distributed dispersed volume on 4.1.5 under centos7 like this a few days ago: gluster volume create data_vol1 disperse-data 4 redundancy 2 transport tcp \ \ gf-p-d-01.isec.foobar.com:/bricks/brick1/brick \ gf-p-d-03.isec.foobar.com:/bricks/brick1/brick \

Re: [Gluster-users] Gluster client

I wrote my own systemd-script: -- [Unit] Description = Data dir After=network.target glusterfs-server.service Required=network-online.target [Mount] What=knoten-1:/gv1 Where=/glusterfs Type=glusterfs Options=defaults,acl [Install] WantedBy=multi-user.target --

Re: [Gluster-users] Gluster client

thanks Dmitry...maybe I wasn't clear enoughbut I was asking for both. Anyway it should be fine now. Cheers On Tue, Oct 16, 2018 at 2:40 PM Dmitry Melekhov wrote: > 16.10.2018 16:38, Alfredo De Luca пишет: > > ok.. found out that backupvolfile-server is correct on fstab in case at >

Re: [Gluster-users] Gluster client

16.10.2018 16:38, Alfredo De Luca пишет: ok.. found out that backupvolfile-server is correct on fstab in case at mounting time the primary server is not responding. so the backupvolfile-server will fail to the next server. Also it seems that if you put in your fstab and the server1 fails

Re: [Gluster-users] Gluster client

ok.. found out that backupvolfile-server is correct on fstab in case at mounting time the primary server is not responding. so the backupvolfile-server will fail to the next server. Also it seems that if you put in your fstab and the server1 fails during normal operation the client will fail

Re: [Gluster-users] [NFS-Ganesha-Devel] Re: NFS-Ganesha question

On 10/16/2018 01:09 AM, Jiffin Tony Thottan wrote: CCing ganesha list as well On Monday 15 October 2018 07:44 PM, Renaud Fortier wrote: Hi, We are currently facing a strange behaviour with our cluster. Right now I’m running bitrot scrub against the volume but I’m not sure it will help