any thoughts?
Miloš
> 30. 11. 2015 v 23:45, Miloš Kozák <milos.ko...@lejmr.com>:
>
> I am using Gluster for a few years without any significant issue (after I
> tweaked configuration for v3.5). My configuration is as follows:
>
> network.remote-dio: enable
>
Is there any way how to go around these errors? Are they fixed in newer
versions? Any recomendations?
Dne 26.8.2015 v 08:28 Miloš Kozák napsal(a):
Hi,
I am trying to optimize my GlusterFS volume, the configuration is in
attachement. My goal is to have glusterfs volume for VMs
Dne 17.8.2015 v 13:30 Miloš Kozák napsal(a):
Dne 17.8.2015 v 10:07 Ravishankar N napsal(a):
On 08/17/2015 12:42 PM, Miloš Kozák wrote:
I assumed that those files are different because of different file
size.
I then reckon the writes are not successful on the 2nd node. The
brick log
Hi,
Dne 17.8.2015 v 06:34 Ravishankar N napsal(a):
On 08/16/2015 04:22 PM, Miloš Kozák wrote:
Hi, I have been running an glusterfs for a while, and everything
works just fine even after one node failure.. However, I went for
brick replacement due to my bricks were not thin-provisioned
*
0989d12cc875387827ebbbdc67503f2b 3706a2cb0bb27ba5787b3c12388f4ebb
md5sum: 6bc6e89a9cb46a4098db300ff6d95b46: Adresář nebo soubor neexistuje
(File or folder does not exist)
Dne 17.8.2015 v 08:40 Ravishankar N napsal(a):
On 08/17/2015 11:58 AM, Miloš Kozák wrote:
Mounted by fuse.
I would not say written
Hi, I have been running an glusterfs for a while, and everything works
just fine even after one node failure.. However, I went for brick
replacement due to my bricks were not thin-provisioned and I wanted to
use snapshots. In short, whole volume went down due to heal daemon which
tool all IO
Hi,
I am planing to use snapshots for backups of virtual machines which are
stored in a gluster volume. I managed to get snapshots working, but I
have a small dilemma how to backups files.
My motivation is to do a full backup onto a different harddrive in case
of brick hdd failure.
The
Hello,
I have been looking for a while, but I can not find the proper
procedure. I have got some VMs stored in a shared folder distributed
using NFS. Additionally, I am switching our storage to GlusterFS, and I
plan to use native access using libgfapi in libvirt. Is there a way how
to import
?
On September 4, 2014 9:12:16 PM PDT, Miloš Kozák
milos.ko...@lejmr.com wrote:
Hi,
I ran few more tests. I moved a file which is an VM image onto GlusterFS
mount and along the load I got this on console of running VM:
lost page write due to I/O error on vda1
Buffer I/O error
Hi,
I ran few more tests. I moved a file which is an VM image onto GlusterFS
mount and along the load I got this on console of running VM:
lost page write due to I/O error on vda1
Buffer I/O error on device vda1, logical block 1049638
lost page write due to I/O error on vda1
Buffer I/O error
PM, Ravishankar N wrote:
On 07/13/2014 09:05 PM, Miloš Kozák wrote:
Hi, I would like to ask about the progress. On the ticket there is
nothing new added..
I haven't had a chance to look at the logs/ reproduce the bug.
Will get
to it in a couple of days.
Thanks,
Ravi
Thanks, Milos
Dne 14
AM, Miloš Kozák wrote:
Hi,
I am running some test on top of v3.5.1 in my 2 nodes configuration
with one disk each and replica 2 mode.
I have two servers connected by a cable. Through this cable I let
glusterd communicate. I start dd to create a relatively large file. In
the middle of writing
Hi,
I am running some test on top of v3.5.1 in my 2 nodes configuration with
one disk each and replica 2 mode.
I have two servers connected by a cable. Through this cable I let
glusterd communicate. I start dd to create a relatively large file. In
the middle of writing process I disconnect
It is great, Thank you very much guys, great job!!!
When we can expect RPMs?
Milos
Dne 14-06-24 06:15 AM, Gluster Build System napsal(a):
SRC: http://bits.gluster.org/pub/gluster/glusterfs/src/glusterfs-3.5.1.tar.gz
This release is made off jenkins-release-73
-- Gluster Build System
14 matches
Mail list logo
