Please share the log snippets(on every master brick node) from
/var/log/glusterfs/geo-replication/MASTER_VOL/*.log if you see any errors.
--
regards
Aravinda
On 09/13/2014 07:02 PM, HL wrote:
Hello
I've upgraded all my nodes from 3.3.x to 3.5.2 glusterfs
since the geo-replication
, not
for every user or programm.
Discussion is going on to add support for any user with sudo access can
create geo-rep session.
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1136296
--
regards
Aravinda
http://aravindavk.in
Thanks.
Bo
___
Gluster
Hello,
Please let us know the version of GlusterFS you are using. Do you see
any errors in the log files about sync failure?(Logs will be in
/var/log/glusterfs/geo-replication dir in each master nodes and
/var/log/glusterfs/geo-replication-slaves in each slave nodes)
--
regards
Aravinda
volume status commands for a remote server using --remote-host option.
It is very easy to install using pip or easy_install.
Check my blog post for more in detail(with screenshots).
http://aravindavk.in/blog/introducing-gdash/
Comments and Suggestions Welcome.
--
regards
Aravinda
http
/
--
regards
Aravinda
http://aravindavk.in
On Thu, Dec 4, 2014 at 7:33 AM, Aravinda m...@aravindavk.in wrote:
Hi All,
I created a small local installable web app called gdash, a simple
dashboard for GlusterFS.
gdash is a super-young project, which shows GlusterFS volume
information about local
to
parse the output of gluster commands when xml is not supported.
--
regards
Aravinda
http://aravindavk.in
On 12/11/2014 07:56 PM, David Gibbons wrote:
Thanks for the feedback, answers inline below:
Have you followed all the upgrade steps w.r.t geo-rep
mentioned in the following link
Hi Dave,
Yes, it is normal that one among the replica pair will be active and
participate in syncing, If active node goes down then other node will
become active.
--
regards
Aravinda
http://aravindavk.in
On 12/14/2014 10:30 PM, David Gibbons wrote:
Thank you for the advice. After re
in slave, and it is unable to
sync.
--
regards
Aravinda
any idea.
Regards
Le Vendredi 12 décembre 2014 19h35, wodel youchi wodel_d...@yahoo.fr
a écrit :
Thanks for your reply,
When executing the gverify.sh script I had these errors on slave.log
[2014-12-12 18:12:45.423669] I
changes and syncs to slave.
Let me know if you face any issues.
--
regards
Aravinda
http://aravindavk.in
On 12/14/2014 12:32 AM, Nathan Aldridge wrote:
Hi,
I have a large volume that I want to geo-replicate using Gluster (
1Tb). I have the data rsynced on both servers and up to date. Can I
start
Hi Nathan,
That's great news.
Please share the modified script, so that entire community will get
benefited. You can send patch to review.gluster.org If you are
comfortable or I will send patch based on your changes.
--
regards
Aravinda
http://aravindavk.in
On Sat, Dec 20, 2014 at 6:07 AM
Looks like node C is in diconnected state. Please let us know the output
of `gluster peer status` from all the master nodes and slave nodes.
--
regards
Aravinda
On 01/22/2015 12:27 AM, PEPONNET, Cyril N (Cyril) wrote:
So,
On master node of my 3 node setup:
1) gluster system:: execute
let us know the GlusterFS version in Master nodes and Slave nodes.
--
regards
Aravinda
On 01/15/2015 09:12 PM, PEPONNET, Cyril N (Cyril) wrote:
[2015-01-15 15:38:13.676252] E [run.c:190:runner_log] 0-management: Failed to
execute script:
/var/lib/glusterd/hooks/1/gsync-create/post/S56glusterd
Aravinda
http://aravindavk.in
___
Gluster-users mailing list
Gluster-users@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-users
any issues.
--
regards
Aravinda
http://aravindavk.in
On 01/05/2015 07:05 PM, Paul Mc Auley wrote:
Hi,
Looking at https://bugzilla.redhat.com/show_bug.cgi?id=1077452 it
seems to imply that it should be possible to set up and run
geo-replication without requiring SSH as the root user
Hi,
Thanks for reporting, will work on having correct path with push-pem
command.
Created a Bug to track the progress.
https://bugzilla.redhat.com/show_bug.cgi?id=1199885
--
regards
Aravinda
On 03/08/2015 01:12 AM, ML mail wrote:
Hello,
I am setting up geo replication on Debian wheezy
This might help.
https://github.com/gluster/glusterfs/blob/release-3.6/doc/admin-guide/en-US/markdown/admin_distributed_geo_rep.md
Let me know if you need any help in setting up geo-replication.
--
regards
Aravinda
http://aravindavk.in
On 04/11/2015 12:05 AM, Eric Berg wrote:
I’m trying to set
this is fixed. By default it will be false.
(That means geo-rep syncs the deletes)
Both can be backported to 3.6.z, but may take some more time.
--
regards
Aravinda
http://aravindavk.in
On 04/28/2015 03:25 PM, wodel youchi wrote:
Hi,
I need some explanations about:
1 - checkpoints in geo
volume info gv-rep0 --remote-host=web1
--
regards
Aravinda
On 05/04/2015 04:20 PM, Crescenzo Cuoppolo wrote:
Hi,
I try to configure gluster with distribuited geo-replication, but when
I try to run
/gluster volume geo-replication gv0 web1:gv-rep0 create push-pem /
The system return to me
to
record this information. As of now this is the limitation.
--
regards
Aravinda
On 05/05/2015 07:49 AM, David Gibbons wrote:
So I should do a compare out-of-band from Gluster and see what is
actually in-sync vs out of sync? Is there any easy way just to start
it over? I am assuming removing
Status output has issue showing exact number of files in sync. Please
check the numbers on disk and let us know if difference exists between
Master and Secondary Volume.
--
regards
Aravinda
On 05/05/2015 06:58 AM, David Gibbons wrote:
I am having an issue with geo-replication. There were
I don't see any issue with ssh command here. Geo-rep will use this
command as prefix and adds additional parameters while running.
Please let us know the Current status and any errors in log
files(/var/log/glusterfs/geo-replication/MASTERVOL_SLAVEHOST_SLAVEVOL/)
--
regards
Aravinda
On 04/08
Hi,
Please let us know the Gluster version you are using. This is a recent
enhancement which will be available in the upcoming Gluster 3.7 release.
--
regards
Aravinda
http://aravindavk.in
On 04/08/2015 04:19 PM, Sander Zijlstra wrote:
LS,
I tried to add a meta volume to my geo-replication
I think we also need version based documentation something similar to
http://guides.emberjs.com/v1.11.0/
--
regards
Aravinda
http://aravindavk.in
On 04/09/2015 07:24 PM, Sankarshan Mukhopadhyay wrote:
On Mon, Mar 23, 2015 at 12:31 PM, Shravan Chandrashekar
schan...@redhat.com wrote:
Hence
://www.gluster.org/mailman/listinfo/gluster-users
--
regards
Aravinda
___
Gluster-users mailing list
Gluster-users@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-users
Aravinda
On 06/18/2015 10:21 AM, Sander Zijlstra wrote:
LS,
I’ve created a replication session (cascaded btw) from our production
cluster to a backup cluster with version 3.6.2 on CentOS 6.6 and when
I want to deactivate the “ignore-deletes” option I get the following
error:
[root@b02-bkp-01
...
___
Gluster-users mailing list
Gluster-users@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-users
--
regards
Aravinda
___
Gluster-users mailing list
Gluster-users@gluster.org
http
trusted.glusterfs.MASTER_VOL_UUID.SLAVE_VOL_UUID.stime BRICK_ROOT
Where,
MASTER_VOL_UUID and SLAVE_VOL_UUID can be found using
`gluster volume info`
BRICK_ROOT Path of Brick
4. Start the Geo-replication.
Meanwhile we will look into the issue. Thanks for reporting.
--
regards
Aravinda
On 05/26/2015 05:58 PM
Geo-rep will recreate the directory with Proper GFID and starts sync.
Let us know if you need any help.
--
regards
Aravinda
On 05/25/2015 10:54 AM, Kotresh Hiremath Ravishankar wrote:
Hi Wodel,
Is the sync mode, tar over ssh (i.e., config use_tarssh is true) ?
If yes, there is known issue
Aravinda
On 08/18/2015 02:08 PM, Milos Cuculovic - MDPI wrote:
Hi All,
I am using geo-replication on 4.4 TB of storage data.
It took some time to do the initial sync, but since a week this was
finished, the problem is that I still have around 140 GB of data
difference.
Any ide why? How
is not a true Backup utility, you can't restore the Volume
to a particular date's state like we can do with other backup tools.
Let us know if you have any questions.
regards
Aravinda
http://aravindavk.in
On 08/17/2015 02:27 PM, Thibault Godouet wrote:
I have a 1 x 2 = 2 volume geo-replicated to a single
in
master.
regards
Aravinda
On 08/21/2015 11:46 PM, Christian Rice wrote:
I’d like to have a distributed-replicated master volume, and
distributed-only slave.
Can this be done? Just beginning the research, but so far I’ve only
done geo-replication with distributed-only volumes. Tips/caveats
root@volume01-replicate
If you see gsyncd messages then everything is normal. If you see ssh
errors then issue is not resolved.
Let us know if any questions.
regards
Aravinda
On 08/11/2015 03:08 AM, Don Ky wrote:
Hello all,
I've been struggling to get gluster-geo replicate functionality
e granular.
regards
Aravinda
On 10/14/2015 08:36 PM, Logan Barfield wrote:
We had a connectivity issue on a "tar+ssh" geo-rep link yesterday that
caused a lot of issues. When the link came back up it immediately went
into a "faulty" state, and the logs were showing "
quot;, are there any
errors in /var/log/glusterfs/geo-replication/*.log in those nodes?
regards
Aravinda
On 11/10/2015 10:50 PM, Dietmar Putz wrote:
Hi all,
i need some help with a geo-replication issue...
recently i upgraded two 6-node distributed-replicated gluster from
ubuntu 12.04.5 lts
Aravinda
On 11/17/2015 02:09 AM, Deepak Ravi wrote:
Hi all
I'm working on a Geo-replication setup that I'm having issues with.
Situation :
- In the east region of AWS, I Created a replicated volume between 2
nodes, lets call this volume *gvol*
-
*In the west region of AWS, I Created
steps
1. Entry Creation using RPC
2. Data sync using Rsync
o What can I do to "fix" this?
Please share the log files, we will look into the issue and help in
resolving this issue.
regards
Aravinda
On 11/04/2015 11:00 PM, Brian Ericson wrote:
tl;dr -- geo-replication o
Usage:
python find_gfid_issues.py
For example,
python find_gfid_issues.py /export/brick1/b1
Let me know if this script is useful in detecting gfid/link issues.
--
regards
Aravinda
___
Gluster-users mailing list
Gluster-users@gluster.org
http
Status looks good. Two master bricks are Active and participating in
syncing. Please let us know the issue you are observing.
regards
Aravinda
On 10/15/2015 11:40 AM, Wade Fitzpatrick wrote:
I have twice now tried to configure geo-replication of our
Stripe-Replicate volume to a remote Stripe
persists even after sometime. Also let us know the
Gluster Version you are using.
regards
Aravinda
http://aravindavk.in
On 10/15/2015 05:20 AM, Brian Ericson wrote:
Admittedly an odd case, but...
o I have simple a simple geo-replication setup: master -> slave.
o I've mounted the master's vol
Brick to Brick)
Since Master has 4 nodes and Slave has 2 nodes. 2 Master nodes are
connected to 1 Slave node.
regards
Aravinda
On 10/07/2015 05:43 AM, Wade Fitzpatrick wrote:
So I ran the following on palace and madonna and it appears to be
syncing properly now
root@palace:~# sed -i -e
's:/usr
Do you see any errors in Master logs?
(/var/log/glusterfs/geo-replication//*.log)
regards
Aravinda
On 10/15/2015 07:51 PM, Brian Ericson wrote:
Thanks!
As near as I can tell, the GlusterFS thinks it's done -- I finally
ended up renaming the files myself after waiting a couple of days
Please share the tracebacks/errors from the logs(Master nodes)
/var/log/glusterfs/geo-replication/static/*.log
regards
Aravinda
On 10/06/2015 01:19 PM, Wade Fitzpatrick wrote:
I am trying to set up geo-replication of a striped-replicate volume. I
used https://github.com/aravindavk/georepsetup
Looks like I/O error on slave while doing keep_alive. We can get more
useful info for the same from Slave log files.
In Slave nodes look for errors in
/var/log/glusterfs/geo-replication-slaves/*.log and
/var/log/glusterfs/geo-replication-slaves/*.gluster.log
regards
Aravinda
On 11/17/2015
uot;,
"online": true,
},
{
"id":"06c47cc3-82c0-11e5-9d59-3c970e9eb10d",
"hostname":"y.y.y.y"
"path": "/gluster/brick2",
"online": false
the
Root's password during run. Will not store password!
Wrote a blog post about thesame.
http://aravindavk.in/blog/introducing-georepsetup
Comments and Suggestions Welcome.
--
regards
Aravinda
http://aravindavk.in
___
Gluster-users mailing list
://bugzilla.redhat.com/enter_bug.cgi?product=GlusterFS
regards
Aravinda
On 09/06/2015 12:37 AM, Mathieu Chateau wrote:
Hello,
for my needs, it's about having a simple "photo" of files present 5
days ago for example.
But i do not want to store file data twice, as most file didn't cha
ailed "
This looks like IPtables/SELinux issue. Geo-rep create command verifies
the Slave Volume by mounting in locally.
regards
Aravinda
On 09/15/2015 12:46 PM, Saravanakumar Arumugam wrote:
Hi,
You are right, This tool may not be compatible with 3.6.5.
I have tried myself with 3.6.5, but faced
be ignored if not using Glusterfind.
regards
Aravinda
On 11/11/2015 06:55 PM, Marco Lorenzo Crociani wrote:
Hi,
I removed one volume from the ovirt console.
oVirt 3.5.4
Gluster 3.7.5
CentOS release 6.7
In the logs there where these errors:
[2015-11-11 13:03:29.783491] I [run.c:190:runner_log
in Slaves, keep backup if
required)
In Brick backend, Crawl and look for files with link count less than 2.
(Exclude .glusterfs and .trashcan directory)
regards
Aravinda
On 01/02/2016 09:56 PM, Dietmar Putz wrote:
Hello all,
one more time i need some help with a geo-replication problem
/glusterfs-specs/blob/master/done/Features/heal-info-and-split-brain-resolution.md
regards
Aravinda
On 11/25/2015 03:08 AM, Audrius Butkevicius wrote:
So the version of rsync is 3.1.0, but the bug mentioned only applies to
large files, where as in my case the files are less than a MB.
I've start
the failed
GFIDs and syncs rest of the files. I am working on fixing the logging issue.
regards
Aravinda
On 11/25/2015 10:51 AM, Aravinda wrote:
Hi,
Looks like GFID conflict in Slave. (Same filename with different GFID
exists in Slave undeleted may be due to unlink failure or any other
failure
You can use `gluster volume status $volume detail --xml` for xml output,
which can be easily consumed by program compared to text output.
regards
Aravinda
On 06/21/2016 07:58 PM, Malte Schmidt wrote:
Under which conditions does "gluster volume status $volume detail"
return some
Hi ML,
Please let us know the output of gluster volume info .
Geo-rep uses the output of Gluster volume info for connecting to slave
nodes based on Brick hosts.
regards
Aravinda
On 06/27/2016 11:09 AM, Kotresh Hiremath Ravishankar wrote:
Hi,
Thanks for reporting the issue. Please raise
Aravinda
On 02/12/2016 01:38 AM, ML mail wrote:
Hello,
I would like to upgrade my Gluster 3.7.6 installation to Gluster 3.7.8 and made
up the following procedure below. Can anyone check it and let me know if it is
correct or if I am missing anything? Note here that I am using Debian 8
and expected to be available in 3.7.8 release.
http://review.gluster.org/#/c/13316/
http://review.gluster.org/#/c/13189/
Following script can be used to find problematic file in each Brick backend.
https://gist.github.com/aravindavk/29f673f13c2f8963447e
regards
Aravinda
On 02/01/2016 08:45 PM
We can provide workaround steps to resync from beginning without
deleting Volume(s).
I will send the Session reset details by tomorrow.
regards
Aravinda
On 02/24/2016 09:08 PM, ML mail wrote:
That's right I saw already a few error messages mentioning "Device or resource
D.
Added TODO list to track the plans
https://github.com/gluster/glustertool/blob/master/TODO.md
regards
Aravinda
On 01/28/2016 12:23 PM, Sachidananda URS wrote:
Also, don't forget to send a pull request to Aravinda, so that others can
use it too.
Maybe add some basic usage note. If it is n
Answers inline.
regards
Aravinda
http://aravindavk.in
On 02/23/2016 02:25 PM, Christian Rice wrote:
The subject line is a mouthful, but pretty much says it all.
apivision:~$ sudo gluster volume geo-replication MIXER
svc-mountbroker@trident24::DR-MIXER status
MASTER NODEMASTER VOL
: https://bugzilla.redhat.com/show_bug.cgi?id=1311926
regards
Aravinda
On 02/24/2016 09:59 PM, ML mail wrote:
That would be great thank you. For me it is not an option to delete the volume
on my master node (2 nodes, 1 brick per node). On the other hand no problem to
delete the volume on the slave
Can you try,
gluster volume geo-replication datastore-master server2::datastore-slave create
push-pem
regards
Aravinda
On 01/19/2016 07:16 PM, Curro Rodriguez wrote:
Hello,
I am trying deploy a Distributed Geo-replica between 2 distributed volumes
with 24 bricks.
Operating system Ubuntu
regards
Aravinda
On 03/08/2016 11:34 PM, Atin Mukherjee wrote:
On 03/07/2016 05:13 PM, Kotresh Hiremath Ravishankar wrote:
Added gluster-users.
Thanks and Regards,
Kotresh H R
- Original Message -
From: "Kotresh Hiremath Ravishankar" <khire...@redhat.com>
To
regards
Aravinda
On 03/31/2016 04:00 AM, Gmail wrote:
I’ve rebuilt the cluster again, making a fresh installation. And now
the error is different.
MASTER NODE MASTER VOLMASTER BRICK SLAVE USER
SLAVE SLAVE NODE STATUS CRA
regards
Aravinda
On 03/31/2016 12:03 PM, Saravanakumar Arumugam wrote:
Hi,
Replies inline.
Thanks,
Saravana
On 03/31/2016 04:00 AM, Gmail wrote:
I’ve rebuilt the cluster again, making a fresh installation. And now
the error is different.
MASTER NODE MASTER VOLMASTER BRICK
to recover, Clone the snapshot to
create new Volume and then establish Geo-replication from cloned
Volume to new volume where ever required.
If we need to restore any specific file/directory then just mount the
snapshot and copy data to required location.
regards
Aravinda
On 03/07/2016 05:13 PM, Kotresh
Hi ML,
While creating file "fileKey", ENOENT error is seen. Since Entry
"fileKey" is not created, rsync failed with "Operation not permitted" error.
ENOENT during create happens only when parent directory does not exists
on Slave or exists with different GFID
Thanks for the feedback. This will help us to improve the
Gluster/Geo-rep user experience.
regards
Aravinda
On 03/02/2016 07:34 PM, ML mail wrote:
Thanks for the info. Somehow geo-rep doesn't work well for me, each time I try
to fix something with the help of the mailing list
Geo-replication command should be run as privileged user itself.
gluster volume geo-replication @ start
and then check the status, if it shows Faulty then please share the log
files present in /var/log/glusterfs/geo-replication//*.log
regards
Aravinda
On 03/29/2016 12:51 PM, Gmail wrote
Hi,
Yesterday I recorded a demo and wrote a blog post about Gluster Eventing
feature.
http://aravindavk.in/blog/10-mins-intro-to-gluster-eventing/
Comments and Suggestions Welcome.
--
regards
Aravinda
http://aravindavk.in
___
Gluster-users
ith the name gluster- can be
executed as `gluster `
Let me know what you guys think about this feature. I am also planning
to add this feature to
glustertool(https://github.com/gluster/glustertool)
--
regards
Aravinda
___
Gluster-users mailing list
Glust
+gluster-users
regards
Aravinda
On 07/13/2016 09:03 PM, Vijay Bellur wrote:
On 07/13/2016 10:23 AM, Aravinda wrote:
Hi,
We are working on Eventing feature for Gluster, Sent feature patch for
the same.
Design: http://review.gluster.org/13115
Patch: http://review.gluster.org/14248
Demo: http
file?
regards
Aravinda
On 07/18/2016 10:11 PM, Alexandre Besnard wrote:
Hello
On a fresh Gluster 3.8 install, I am not able to configure a geo-replicated
volume. Everything works fine up to starting of the volume however Gluster
reports a faulty status.
When looking at the logs (gluster_error
, Soumya Koduri, Rajesh Joseph, Anoop C S)
- Integrate with external resource management software (Owners: Kaleb
Keithley, Jose Rivera)
- Gluster Eventing (Owners: Aravinda VK)
- Gluster Management REST APIs (Owners: Aravinda VK)
- Inotify (Owners: Soumya Koduri)
- pNFS Layout Recall (Owners: Jiffin
You can try `gluster-georep-setup` tool
http://aravindavk.in/blog/gluster-georep-tools
regards
Aravinda
On 02/17/2017 08:39 PM, lejeczek wrote:
hi everyone,
I've been browsing list's messages and it seems to me that users
struggle, I do.
I do what I thought was simple, I follow official
%20Guide/Distributed%20Geo%20Replication/
We are working on to provide option to choose Active workers
manually.(Hopefully this feature will land in 3.10 release(Dec 2016))
regards
Aravinda
On Monday 05 September 2016 11:27 AM, Georg Schoenberger wrote:
Hi folks,
I am using distributed geo
updates and Release notes update
- Initiate discussion on next release 3.10 and update Roadmap page
On behalf of
Aravinda & Pranith
--
regards
Aravinda
___
Gluster-users mailing list
Gluster-users@gluster.org
http://www.gluster.org/mailman/list
- Release notes preparation
- Testing and Documentation completeness checking.
- Blog about the release
Comments and Suggestions are Welcome.
@Pranith, please add if missed anything.
Thanks
Aravinda & Pranith
___
Gluster-users mailing list
Glu
Thanks, but couldn't find one log file output. To get the log file path
gluster volume geo-replication :: config
log_file
regards
Aravinda
On Wednesday 14 September 2016 12:02 PM, ML mail wrote:
Dear Aravinda,
As requested I have attached within this mail a file containing the last
100
Please share the logs from Master node which is
Faulty(/var/log/glusterfs/geo-replication/__/*.log)
regards
Aravinda
On Wednesday 14 September 2016 01:10 AM, ML mail wrote:
Hi,
I just discovered that one of my replicated glusterfs volumes is not being
geo-replicated to my slave node (STATUS
We can check in brick backend.
ls -ld $BRICK_ROOT/.glusterfs/f7/eb/f7eb9d21-d39a-4dd6-941c-46d430e18aa2
regards
Aravinda
On Thursday 15 September 2016 09:12 PM, ML mail wrote:
So I ran a on my master a "find /mybrick -name 'File 2016.xlsx'" and got the
following two entries:
3
-46d430e18aa2/File
2016.xlsx.ocTransferId1333449197.part ->
/.gfid/f7eb9d21-d39a-4dd6-941c-46d430e18aa2/File 2016.xlsx => -1
(Directory not empty)
regards
Aravinda
On Wednesday 14 September 2016 12:49 PM, ML mail wrote:
As requested you will find below the last few 100 lines of the g
regards
Aravinda
On Wednesday 07 September 2016 11:24 AM, Georg Schoenberger wrote:
On 2016-09-07 07:45, Aravinda wrote:
Using Checkpoint feature you can confirm that Geo-rep synced till
that time.
Set Checkpoint
gluster volume geo-replication ::
config checkpoint now
Touch Mount point
- Existing solutions and disadvantageous
- Proposed solution
- Benchmark with and without this feature
- Open discussion about issues with the proposed solution
regards
Aravinda
On Saturday 13 August 2016 03:45 AM, Amye Scavarda wrote:
On Fri, Aug 12, 2016 at 12:48 PM, Vijay Bellur <v
- Example Events Client (CLI client and example
Web App)
- Future
regards
Aravinda
On Saturday 13 August 2016 03:45 AM, Amye Scavarda wrote:
On Fri, Aug 12, 2016 at 12:48 PM, Vijay Bellur <vbel...@redhat.com
<mailto:vbel...@redhat.com>> wrote:
Hey All,
Gluster Developer
/Administrator%20Guide/Geo%20Replication/
regards
Aravinda
On 11/26/2016 02:33 AM, Alexandr Porunov wrote:
Hello,
I want to create geo replication between two volumes. Volumes works
just fine. But geo-replication doesn't work at all.
My master volume nodes are:
192.168.0.120
192.168.0.121
%20Guide/Geo%20Replication/#checkpoint
regards
Aravinda
On Monday 21 November 2016 01:36 PM, Gandalf Corvotempesta wrote:
anyone?
Il 19 nov 2016 10:36, "Gandalf Corvotempesta"
<gandalf.corvotempe...@gmail.com
<mailto:gandalf.corvotempe...@gmail.com>> ha scritto:
Woul
53ca4755808
https://github.com/gluster/glustercli-python/commit/f4f0a8c7540bb94af6a9b486baaa2a2fe67c5d04
--
regards
Aravinda
http://aravindavk.in
___
Gluster-users mailing list
Gluster-users@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-users
. Please let us know if it is useful.
http://gluster.readthedocs.io/en/latest/Administrator%20Guide/Geo%20Replication/
--
regards
Aravinda
http://aravindavk.in
___
Gluster-users mailing list
Gluster-users@gluster.org
http://www.gluster.org/mailman
if you face any issues
while using this utility.
Feel free to open issue/feature request here
https://github.com/aravindavk/gluster-dir-health-check/issues
Note: This tool is created using Rust(https://rust-lang.org)
--
regards
Aravinda
___
Glu
This tool can be used to archive Gluster Changelogs to different directory
https://github.com/aravindavk/archive_gluster_changelogs
regards
Aravinda
On 04/05/2017 11:22 AM, Mohammed Rafi K C wrote:
On 04/04/2017 10:53 PM, mabi wrote:
Anyone?
Original Message
Subject
Looks like SELinux issue. As a workaround use the other method mentioned
in documentation
gluster system:: gsec_create
regards
Aravinda
On 04/14/2017 12:36 AM, Tanner Bruce wrote:
I have a 4 node gluster cluster, and a separate 1 node cluster that I
want to setup geo-replication on.
I
/master/README.md
regards
Aravinda
On 04/26/2017 02:59 PM, Nux! wrote:
Hello,
No, not as client. I want to get the size of all the volumes on my cluster.
I had hoped "gluster volume status detail" would tell me this, but it does not.
I need to mount all the volumes and run df to find
gluster volume geo-replication ::
start force
With these steps you will be able to stop/delete the Geo-rep session. I
will add these steps in the documentation
page(http://gluster.readthedocs.io/en/latest/Administrator%20Guide/Geo%20Replication/).
regards
Aravinda VK
On 08/08/2017 12:08 PM
er is down or not reachable.
regards
Aravinda VK
On 08/07/2017 10:01 PM, mabi wrote:
Hi,
I would really like to get rid of this geo-replication session as I am
stuck with it right now. For example I can't even stop my volume as it
complains about that geo-replcation...
Can someone let me know
You can use this tool to archive old changelogs which are already
processed by Geo-rep/Glusterfind and other consumers.
https://github.com/aravindavk/archive_gluster_changelogs
regards
Aravinda VK
http://aravindavk.in
On 06/26/2017 03:43 PM, Klas Mattsson wrote:
Hello all,
I'm trying to find
Answers inline,
@Kotresh, please add if I missed anything.
regards
Aravinda VK
http://aravindavk.in
On 06/23/2017 06:29 PM, Stephen Remde wrote:
I have a ~600tb distributed gluster volume that I want to start using
geo replication on.
The current volume is on 6 100tb bricks on 2 servers
My
/mailman/listinfo/gluster-users
--
regards
Aravinda VK
http://aravindavk.in
___
Gluster-users mailing list
Gluster-users@gluster.org
http://lists.gluster.org/mailman/listinfo/gluster-users
oned steps helps.
Please can anybody help advise what to do in this situation?
___
Gluster-users mailing list
Gluster-users@gluster.org
http://lists.gluster.org/mailman/listinfo/gluster-users
--
regards
Aravinda VK
http://ara
.
--
regards
Aravinda VK
___
Gluster-users mailing list
Gluster-users@gluster.org
http://lists.gluster.org/mailman/listinfo/gluster-users
operations). Glusterfind can be enhanced to get path from
GFID without crawl by using the new GFID to Path feature[2](will be
available with release-3.12).
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1260937
[2] https://github.com/gluster/glusterfs/issues/139
--
regards
Aravinda VK
the log message into meaningful.
--
regards
Aravinda VK
http://aravindavk.in
On Saturday 25 November 2017 07:48 AM, Mark Connor wrote:
Folks, need help interpreting this message from my geo rep logs for my
volume mojo.
ssh%3A%2F%2Froot%40173.173.241.2%3Agluster%3A%2F%2F127.0.0.1%3Amojo
1 - 100 of 190 matches
Mail list logo
