>From memory the Linux version always seems to run that bit faster and
smoother, that was my impression when I had both installed albeit different
versions (could never work out how to download the latest version,).
Not sure if this will help but my load/save time whilst not fast have
improved
I had the same issue with Windows 10. Very slow loading and saving. I went
back to 2.6 and everything was good.
Saving with 2.6 took around 8 seconds.
With 3.2 took close to 40 seconds to save.
I then made the window as small as I could and it would save in about 12
seconds.
So based on that
Some people have reported saving took considerably less time when they made
the gnucash window as small as possible. This suggests gnucash is repeatedly
updating its window contents while saving.
Can you check if this makes a difference for you ?
Geert
Op donderdag 5 juli 2018 08:19:01 CEST
I downgraded to 2.6 - could not resolve it on Windows 10 - deleting some
recovery files helped a little, but still a major problem - not usable in
my view.
On Thu, 5 Jul 2018 at 08:11, Jamestk wrote:
> djza wrote
> > Thank you for the feedback, I did check the threads in the May archive,
> >
djza wrote
> Thank you for the feedback, I did check the threads in the May archive,
> also cleaned out the backup files (of which there were a lot), but the
> improvement (if any) is only marginal. I see there were some bug reports
> relating to this, so I suspect I am also going to drop back to
Thank you for the feedback, I did check the threads in the May archive,
also cleaned out the backup files (of which there were a lot), but the
improvement (if any) is only marginal. I see there were some bug reports
relating to this, so I suspect I am also going to drop back to 2.6 and see
how
Op woensdag 30 mei 2018 10:12:37 CEST schreef Maf. King:
> Hi Derick,
>
> someone else reported crazy long save times on Win10 platforms earlier this
> month - don't recall if there was a solution found, but have a hunt through
> the archives for May and see if that thread offers any help.
>
>
Hi Derick,
someone else reported crazy long save times on Win10 platforms earlier this
month - don't recall if there was a solution found, but have a hunt through
the archives for May and see if that thread offers any help.
HTH,
Maf.
On Wednesday, 30 May 2018 08:52:06 BST Derick Jordaan
Hi
I just installed 3.1-2 on a new Windows 10 machine with a SSD disk. Data
files were copied across from a Windows 7 machine where I was using an
older gnucash version (2.x, will need to boot that machine to check exactly
which version was used).
My issue is on the new machine my XML data files