Android phone/HackRF USB port experience
I have used the SDRTouch and RF analyzer to interface with the RTLSDR ($12
analog TV tuner) and the HackRF. Both of these draw power heavily from the
phone. For the SG3 and SG5 I replaced the stock batteries with heavy duty after
market units available
I'm not certain, because I don't want to break portapack or other add on
boards, but it may be possible for us to toggle a GPIO pin on one of the
headers when we switch to TX mode, if that would help?
Dominic
On 20 June 2018 at 17:55, Gavin Jacobs wrote:
> Chuck,
> I have used the bias-t
Dominic
Thanks for that offer/suggestion, but it’s already done! I found the TX mode
signal that drives the TX LED, and it was already brought out to P5. So All I
had to do was solder some ribbon cable to P5 socket (which is not populated). I
have it connected to my power amp such that it
It's possible that we could add an option for this, but I wouldn't want to
make it the default because there are times when we don't want to turn it
off when switching back to RX mode.
Dominic
On 26 June 2018 at 16:51, Chuck McManis wrote:
> Or to put it differently, :-) If the HackRF would
Or to put it differently, :-) If the HackRF would enable the ANT bias when
it was transmitting then it would "just work" as they say.
On Tue, Jun 26, 2018 at 11:18 AM Gavin Jacobs
wrote:
> Dominic
> Thanks for that offer/suggestion, but it’s already done! I found the TX
> mode signal that
