The way to reference a MVS file in most unix commands is:
//'mvs.file.name'
Maybe SmartFTP does the same.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Neal Eckhardt
Sent: Tuesday, February 14, 2012 11:10 AM
To: IBM-MAIN@bama.ua.edu
no
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Micheal Butz
Sent: Monday, January 09, 2012 3:52 PM
To: IBM-MAIN@bama.ua.edu
Subject: Cics Global User Exit
Do CICS Global User exits have to be loaded In CSA
Sent from my iPhone
Abend is due to:
07.52.37 STC00667 CSV003I REQUESTED MODULE CNMPPNOT FOUND
07.52.37 STC00667 CSV028I ABEND806-04 JOBNAME=NETVIEW
Module CNMPP should be in SYS1.NETVIEW.CNMLINK
Check LINKLIST or STEPLIB
-Original Message-
From: IBM Mainframe Discussion List
If you have system automation table or just a Netview automation table, you can
trap the message and
run a Rexx clist that issues WTO commands and sets the descriptor codes.
Run HELP WTO on Netview for more info.
DESC,
I thought tht testcase was done away with.
The new ip address is
FTP.EMEA.IBM.COM (192.109.81.7)
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Mark Zelden
Sent: Monday, October 24, 2011 8:58 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re:
Here is another example (with direct wtor)
CNOP 0,4
WTOR 'JREC00: DO NOT RESPOND TO MESSAGE UNLESS THIS JOB IS TO BE C
TERMINATED!! NEVER CANCEL - JUST RESPOND END TO STOP.', C
For TSO and batch, set up a profile in your home directory called .profile and
include
JAVA_HOME=/your-jdir/j16/J6.0
Export JAVA_HOME
PATH=$JAVA_HOME/bin
Export PATH
LIBPATH=/$JAVA_HOME/bin:$JAVA_HOME/bin/classic
Export LIBPATH
CICS can only run with 1 release of java at a time (per run).
First, what is AXR?
Second, to define the console to CICS you can either use auto-install for
consoles if set up or better yet,
Just define a TERMINAL entry for it with RDO filling in the appropriate fields
pertaining to consoles.
The console name AXT...should be specified in the CONSNAME
Yes, it's system REXX. How can I define a console name *AXT041D1, can I
define another EMCS operator console ?
2011/9/27 Barkow, Eileen ebar...@doitt.nyc.gov
First, what is AXR?
Second, to define the console to CICS you can either use auto-install for
consoles if set up or better yet,
Just
Check the internet options set for IE, especially things like lan settings and
proxy servers and various security and firewall options.
A lot of downloads that are http based work with FireFox and not IE in this
installation because the LAN group has not messed it up yet. ftp downloads work
I do not understand what you are trying to do with this program -
below is what I get as the output.
This program is only measuring the CPU time this one job (itself) is taking so
what good is it?
You need to be able to measure the amount of time some other job is taking,
like some monitors
You can also ftp the load modules directly:
cd 'REMOTE.PDS'
lcd 'LOCAL.PDS'
bin
put *// copies all modules in local.pds to remote.pds
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
R.S.
The command should be java -version not java version.
Can you run java -version from OMVS under tso, not batch?
Include these in your profile LIBPATH:
LIBPATH=$JAVA_HOME/include:$JAVA_HOME/bin:$JAVA_HOME/bin/classic
Sometimes there was a storage problem with the JVM obtaining the initial size -
@bama.ua.edu
Subject: Re: Tivoli System Automation V3R3 manuals
Eileen,
Perfect link...thanks!
Now off to read up on ProcOps. Wish me luck! :-)
Bob
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Barkow, Eileen
Sent: Tuesday, August 16
http://www-03.ibm.com/systems/z/os/zos/features/system_automation/bkserv/
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Richards, Robert B.
Sent: Tuesday, August 16, 2011 1:22 PM
To: IBM-MAIN@bama.ua.edu
Subject: Tivoli System
Would anyone know what is causing the error below?
I am trying to researchit but I am not very familiar with Netview internals
and parameters and need a fast solution.
The RACF group says that nothing was changed on this lpar and the Netview
programmer is not sure about
any changes to security.
In
A826B9FD78356242A9D9595912F9B2323A4690FA88@DOITTMAIL03.doitt.nycnet,
on 08/05/2011
at 11:03 AM, Barkow, Eileen ebar...@doitt.nyc.gov said:
Would anyone know what is causing the error below?
Yes; the cause listed in the RACF message manual.
The RACF group says that nothing was changed on this lpar and the
Netview programmer
security problem
On Fri, 5 Aug 2011 11:58:45 -0400, Barkow, Eileen ebar...@doitt.nyc.gov wrote:
We do not want the give the user access to issue MVS commands -
That is not the way this worked.
The clist does specific functions which the user cannot do directly with MVS
commands.
Netview 5.4
(Seymour J.)
Sent: Friday, August 05, 2011 1:02 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Netview security problem
In
A826B9FD78356242A9D9595912F9B2323A4690FA92@DOITTMAIL03.doitt.nycnet,
on 08/05/2011
at 11:58 AM, Barkow, Eileen ebar...@doitt.nyc.gov said:
We do not want the give the user access
.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Barkow, Eileen
Sent: Friday, August 05, 2011 11:03 AM
To: IBM-MAIN@bama.ua.edu
Subject: Netview security problem
Would anyone know what is causing the error below?
I am trying to researchit
!
-
Chris Mason
On Fri, 5 Aug 2011 13:10:11 -0400, Barkow, Eileen ebar...@doitt.nyc.gov wrote:
From this excerpt, Netview 5.4 does pass the MVS commands on for security
checking.
The difference now is that it is checking against the invoking userid, not
that of the Netview operator.
In NetView
-0400, Barkow, Eileen ebar...@doitt.nyc.gov wrote:
I got the answer from IBM - there is a NETVIEW AUTHCHCK parm in CNMSTYLE which
is currently set to
SOURCEID instead of TARGETID as it used to be.
This causes the security checking to be invoked against the invoking user and
not the userid who
===
From:
Barkow, Eileen ebar...@doitt.nyc.gov
To:
IBM-MAIN@bama.ua.edu
Date:
08/05/2011 02:52 PM
Subject:
Re: Netview security problem
Sent by:
IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu
Thanks for your comments Chris, but I think that you missed
A mask of 7 loads the low order 3 bytes, so that r1 would contain whatever the
high order byte it contained
originally plus 08 in the low order 3 bytes.
L R2,PARMJOBC
ICM R1,7,0(R2)
If smf30cps contains 0001, then the first 4 bytes of wk1 would contain
0001 after the move
And
12:07 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Anyone running using Perl on Z/OS
In
A826B9FD78356242A9D9595912F9B2323A4690F678@DOITTMAIL03.doitt.nycnet,
on 07/26/2011
at 09:26 AM, Barkow, Eileen ebar...@doitt.nyc.gov said:
But I did get to learn a little Perl, which is basically a short
Margins should be 1,72 according to the doc for compiling with sockets - or
just specify MAR and let it default.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Henrique Seganfredo
Sent: Tuesday, July 26, 2011 2:43 PM
To:
I tried to write an application that needed to use Unix sendmail facility and
it would have worked except for the stupid anomalies in Perl. My Perl program
had to issue the external command 'sendmail' multiple times after formatting
the msgs into an hfs directory - it therefore needed to
You need to use MARGINS - not NOMARGINS.
I had a similar problem once and I think that Margins fixed it (or maybe it was
some other parm - I am still looking).
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Henrique Seganfredo
Sent:
I think that you need to set the MARGINS compiler option, or just specify MAR
in the compiler parms.
Check the c programmers guide about compiling with Sockets.
*
If your C language statements contain information, such as sequence numbers,
which are not
Re this comment:
In a 2011 MVS environment, knowledge of Unix *is* necessary, unless you are in
a niche, e.g., CICS.
Have you worked with CICS lately?
CICS installation and maintenance requires HFS files.
Web services and functions all utilize HFS files and therefore access to Unix.
And of
you can switch the COBOL compiles to
DATA(31) and you're done.
Good luck, and feel free to ask more questions if you need to.
HTH
Peter
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Barkow, Eileen
Sent: Wednesday, July 13, 2011 4:06
.
Good luck, and feel free to ask more questions if you need to.
HTH
Peter
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Barkow, Eileen
Sent: Wednesday, July 13, 2011 4:06 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: running Assembler I/O
.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Steve Comstock
Sent: Thursday, July 14, 2011 10:41 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: running Assembler I/O macro code as AMODE 31, RMODE ANY
On 7/14/2011 8:30 AM, Barkow, Eileen wrote
option for COBOL.
-jc-
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Barkow, Eileen
Sent: Thursday, July 14, 2011 9:30 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: running Assembler I/O macro code as AMODE 31, RMODE ANY
The programmer
Maybe ALL31(OFF) would be the simplest thing to use -
Although the programmers may not be looking for the simplest solution.
Thanks for this info Victor
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Victor Gil
Sent: Thursday, July 14,
Maybe you le maclib is called SYS1.CEE.SCEEMAC or something like it.
CEEXOPT is in the LE maclib.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Manuel Tabares Solórzano
Sent: Thursday, July 14, 2011 11:27 AM
To: IBM-MAIN@bama.ua.edu
As per this item, RMODE(SPLIT) cannot be used for COBOL.
https://www-304.ibm.com/support/docview.wss?uid=swg21253383
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
john gilmore
Sent: Tuesday, July 12, 2011 11:43 AM
To:
, July 13, 2011 1:48 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: running Assembler I/O macro code as AMODE 31, RMODE ANY
In
A826B9FD78356242A9D9595912F9B2323A4468A0EC@DOITTMAIL03.doitt.nycnet,
on 07/12/2011
at 11:06 AM, Barkow, Eileen ebar...@doitt.nyc.gov said:
We have some old Cobol programs
as AMODE 31, RMODE ANY
On 7/13/2011 11:53 AM, Barkow, Eileen wrote:
I meant that linking everything AMODE 24 was the 'only' way the users could
get it to work - that is why they
were asking for other ways to do it.
So how have you resolved the problem?
-Original Message-
From: IBM
: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Steve Comstock
Sent: Wednesday, July 13, 2011 2:56 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: running Assembler I/O macro code as AMODE 31, RMODE ANY
On 7/13/2011 12:32 PM, Barkow, Eileen wrote:
I passed all the info I got from
To: IBM-MAIN@bama.ua.edu
Subject: Re: running Assembler I/O macro code as AMODE 31, RMODE ANY
On 7/13/2011 1:21 PM, Barkow, Eileen wrote:
Steve,
I am sorry but I did not see your post with the 3 papers mentioned.
When was it sent? I hope I did not delete it - I get copies of alot of error
msg
Support
P.O. Box 6462
2000 Wade Hampton Blvd.
LC1-302
Greenville, South Carolina, 29606
Cell: 864 569--5338
Tel: 864 987-1417
Fax: 864 987-4500
E-mail: otto.schumac...@hp.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Barkow, Eileen
data
areas. Move data from 31-bit WORKING-STORAGE to the LINKAGE-defined 24-bit
areas to pass to the subroutines.
HTH
Peter
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Barkow, Eileen
Sent: Tuesday, July 12, 2011 11:06 AM
To: IBM
We have some old Cobol programs that are being upgraded to Enterprise Cobol and
the users would like to be able to link them as AMODE 31 RMODE ANY.
The problem is that some of these programs call assembler modules to do the i/o
via
QSAM and VSAM macros (TESTCB, SHOWCB, GET, PUT, PUTX, etc) and
Thanks John,
I will look into RMODE(SPLIT).
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
john gilmore
Sent: Tuesday, July 12, 2011 11:43 AM
To: IBM-MAIN@bama.ua.edu
Subject: running Assembler I/O macro code as AMODE 31, RMODE ANY
If
we are running Z/OS 1.11.
When i issue the TSO STATUS command in TSO
on some of our lpars, the response is preceded by either the IKJ56192I
or IKJ56211I msgs. On other lpars, it is not.
Does anyone know what causes this?
i use STATUS in come clists and have to trap the response with REXX OUTTRAP
2011 09:50:53 -0400 Barkow, Eileen ebar...@doitt.nyc.gov
wrote:
:we are running Z/OS 1.11.
:When i issue the TSO STATUS command in TSO
:on some of our lpars, the response is preceded by either the IKJ56192I
:or IKJ56211I msgs. On other lpars, it is not.
:Does anyone know what causes this?
:i use
: Re: TSO STATUS and IKJ56192I/IKJ56211I msgs
On Mon, 13 Jun 2011 09:50:53 -0400, Barkow, Eileen wrote:
i use STATUS in come clists and have to trap the response with REXX OUTTRAP and
the extra field or lack of it throws the clists off (unless I modify them
for each lpar to
account for the IKJ
Engineer
Tel: +1-952-838-1039
charles.har...@ca.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Barkow, Eileen
Sent: Monday, June 13, 2011 9:36 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: TSO STATUS and IKJ56192I/IKJ56211I msgs
I
In IBM System Automation you can either write clists in the native clist
language or in REXX.
I think that IBM terms it as such in the documentation - 'CLIST' either native
or in REXX.
And in TSO you can either use the native clist language or REXX.
So I assume that when written in REXX whatever
Stay active on the lists while you recover.
You are one of the most knowledgeable people around on all the lists and your
input is
always deeply appreciated.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
John McKown
Sent: Wednesday,
But the network part of things is a lot more complicated.
New lines and network definitions may have to be installed for SNA and IP
addresses changed for web applications.
Similar to doing a DR test at remote sites.
-Original Message-
From: IBM Mainframe Discussion List
Check your proxy settings in IE - maybe something turned use proxy on -
Tools--internet options--connections--lan settings
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Mary Anne Matyaz
Sent: Friday, May 20, 2011 12:43 PM
To:
I do not know much about DB2 but I do know that there is a product called DB2
Connect from IBM that allows connections to DB2 on other servers and platforms.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Roberto Halais
Sent: Friday,
If you mean that you want the commands to run from a job stream, then just run
a clist from batch or invoke the IKJEFT01
Module passing it the name of the clist to run in the first parameter and pass
parms to the clist in the following parms:
/***
/TSO EXEC
and PUT caused the input stack of
commands
to simply stop at that command. I don't know if this is still true, but if
the command
doesn't execute, perhaps it's still true.
Barry Merrill
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf
Of Barkow
From principles of operation:
Both BRANCH AND LINK and BRANCH AND SAVE have an R1 field. They form a branch
address by means of fields that depend on the instruction. The operations of
the instructions are summarized as follows:
In the 24-bit addressing mode, both instructions place the
order bit if R1 in 31 bit mode
Sent from my iPhone
On Apr 29, 2011, at 3:35 PM, Barkow, Eileen ebar...@doitt.nyc.gov
wrote:
From principles of operation:
Both BRANCH AND LINK and BRANCH AND SAVE have an R1 field. They form
a branch address by means of fields that depend on the instruction
A simple way to download a pds is with mget.
From a pc cmd.exe session:
cd download.directory
ftp mvs.ip.addr
mget rex.pds(*)
bye
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Mark Zelden
Sent: Thursday, April 28, 2011 10:03 AM
To:
Services - z/OS, OS/390 and MVS
mailto:m...@mzelden.com
Mark's MVS Utilities: http://www.mzelden.com/mvsutil.html
Systems Programming expert at http://expertanswercenter.techtarget.com/
On Thu, 28 Apr 2011 10:14:01 -0400, Barkow, Eileen ebar
If you have an automation package like IBM SA, or maybe just with Netview
itself, you can trap the
SLIP msg and run a clist which sends the email.
I have a little SA subsystem and MVS proc setup to do this -
I send out loads of emails about CICS abends, VPS printer errors, etc.
-Original
-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Mark Zelden
Sent: Thursday, April 28, 2011 11:46 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: XMIT manager
On Thu, 28 Apr 2011 11:13:32 -0400, Barkow, Eileen ebar...@doitt.nyc.gov
wrote:
For loadlibs, try specifying bin
@bama.ua.edu] On Behalf Of
Paul Gilmartin
Sent: Thursday, April 28, 2011 12:12 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: XMIT manager
On Thu, 28 Apr 2011 12:01:29 -0400, Barkow, Eileen wrote:
I do not see anything about XMIT running on the PC from HELP XMIT.
Where do you get the XMIT software to run
Can't someone just use another email id and false name to remain anonymous?
I have seen some of these on the lists.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Mark Regan
Sent: Wednesday, April 20, 2011 2:19 PM
To:
This error occasionally happened in cics ts 3.2 with the isc links.
We have regions coming up at different times, so we try to reset the
connections when one comes up
And the other does not:
To resychronize, issue the command:
CEMT SET CONN( sysname ) RESYNC
-Original Message-
From:
I cannot connect from the pc to the mainframe - I was told that the fireall
was preventing ICMP traffic.
I just requested that the firewall be opened to allow ICMP traffic.
But is there any other way around the firewall to connect thru IP.
I usually get to ISPF via TN3270, but we also have
, April 12, 2011 10:50 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Cool Things You Can Do in z/OS
On Tue, 12 Apr 2011 09:45:05 -0400, Barkow, Eileen wrote:
I cannot connect from the pc to the mainframe - I was told that the fireall
was preventing ICMP traffic.
I just requested that the firewall
: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Paul Gilmartin
Sent: Tuesday, April 12, 2011 11:32 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Cool Things You Can Do in z/OS
On Tue, 12 Apr 2011 10:52:57 -0400, Barkow, Eileen wrote:
I cannot ping the PC IP address and WSA
[mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Barkow, Eileen
Sent: Tuesday, April 12, 2011 9:53 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Cool Things You Can Do in z/OS
I cannot ping the PC IP address and WSA gives back RC=60, so
I am assuming that it is the firewall
(network people told me
We have Expediter active in one of our production environments for these type
of problems.
If you have it, you can turn it on for the one transaction.
I have not used Xpediter much since we used to have Intertest, which gave a
trace back of the performs -
But I imagine that Xpediter will do the
You also need to the new target zone to the global zone :
SET BDY(GLOBAL)
/* ADD THE ADDITIONAL ZONE */
/* TO THE GLOBAL ZONE */
.
Specify a region size on the job card ..eg: REGION=8M
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
SAURABH KHANDELWAL
Sent: Thursday, April 07, 2011 1:14 PM
To: IBM-MAIN@bama.ua.edu
Subject: RSU Receive Error
Hello,
I am
Look at preventive service planning on ibmlink-
Select maint search on left, then z/os, fill in system (z/os from menu) and
year and put level
https://www-304.ibm.com/ibmlink/psp/submit.wss
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
IBM provided a support pac (CA1H) several years ago with samples of CICS
programs that send email.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Steve Comstock
Sent: Tuesday, April 05, 2011 10:04 AM
To: IBM-MAIN@bama.ua.edu
Subject:
Enter the MVS command:
D LOGGER,LOGSTREAM,LSNAME=CICS1USR.CICS1.DFHSHUNT to see if the logstream is
still there and properly defined and not being used elsewhere.
If not, redefine it and INITIAL start the region.
-Original Message-
From: IBM Mainframe Discussion List
Try adding unalloc keyword: 'FREE FILE DD(FILEOUT) UNALLOC'
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Scott Ford
Sent: Monday, February 28, 2011 3:57 PM
To: IBM-MAIN@bama.ua.edu
Subject: BPXWDYN
I am trying to to the following in
I hope this is not a duplicate but the first one got returned.
//**this was for an old release of le but you can plug in the current le
options you want
and set the current LE FMID in the usermod.
you can replace CEEDOPT with CEEUOPT.
when you rebind on unix you can include the CEEUOPT
module
Try bringing up the CICS regions with START=INITIAL
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Magen Margalit
Sent: Monday, February 07, 2011 11:58 AM
To: IBM-MAIN@bama.ua.edu
Subject: DFSMStvs Logstreams
Hi list.
We are a ZOS 1.9
Sorry, I responded to the wrong message.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Barkow, Eileen
Sent: Monday, February 07, 2011 12:02 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: DFSMStvs Logstreams
Try bringing up the CICS regions
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Barkow, Eileen
Sent: Thursday, February 03, 2011 4:45 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Remote printers are Drained
Are you using SA or just Netview?
I know that with SA, you either have
DRAINED is a status used by VPS.
Printers may go into DRAINED/EDRAINED status following an error, which is
Shown in the VPS log.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of
Elardus Engelbrecht
Sent: Thursday, February 03, 2011 2:56 AM
Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Barkow, Eileen
Sent: Thursday, February 03, 2011 1:27 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Remote printers are Drained
DRAINED is a status used by VPS.
Printers may go into DRAINED/EDRAINED status following an error, which
is
Shown in the VPS
-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Barkow, Eileen
Sent: Thursday, February 03, 2011 2:11 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Remote printers are Drained
NETVIEW automation (I assume that you are using IBM SA) is probably
chaining off some message
confused why NETVIEW start command was not executed at a
particular time.
Regards,
Chokalingam Thangavelu
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Barkow, Eileen
Sent: Thursday, February 03, 2011 3:57 PM
To: IBM-MAIN@bama.ua.edu
Subject
I do not know the DDNAME that TSO CALL uses for the pgmlib allocation, but
these
routines may be used to find all of the PDS' allocated to the TSO address
space.
***routine LOCDEBS locates the DEB for all datasets allocated to the region and
saves the addresses in a table along with the
I have an assembler program that determines dataset names of load modules.
Basically, it does a BLDL on either steplib (via TCBJLB field) or linklist or
other ddnames
to get the concatenation number of the loadlib and then uses
RDJFCB to retrieve the 'allocation retrieval list' (IHAARL) from
Eileen,
I'd like to see your program, if possible. I am not fluent in assembler, but I
have an assembler-handbook on my desk to help me decipher it :-)
Thank you,
Etienne
On Wed, 29 Sep 2010 10:24:51 -0400, Barkow, Eileen
ebar...@doitt.nyc.gov wrote:
I have an assembler program
***this is part of a routine that reads a member of sys1.parmlib using BPAM
OPEN (PARMLIB,(INPUT))
LTR 15,15
BNZ DEALPLIB
USING IHADCB,1
MVC BLKSIZE,DCBBLKSI SAVE BLOCKSIZE
MVC
Try setting r15 to 0 before exiting.
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of
Ram Study
Sent: Wednesday, August 18, 2010 9:51 PM
To: IBM-MAIN@bama.ua.edu
Subject: QUERY IN ASSEMBLER
Hi All,
I have written a basic file handling
ABENDAID
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of
Phil Kingston
Sent: Tuesday, August 17, 2010 12:29 PM
To: IBM-MAIN@bama.ua.edu
Subject: MSDSD3128E
Hi All,
I'm getting this message:
MSDSD3128E An error occurred in SVC dump
I thought that I would pass this on to the list if anyone is interested.
City of New York
Department of Information Technology and Telecommunications
Job Vacancy Notice
Civil Service Title: Computer Specialist (Software) Level: 02
Title Code No: 13632 Salary: $71,982/$82,779 - $91,000
Office
There is no reason to use the index name - the cluster name works fine.
The cics list is: 'lists...@listserv.uga.edu'
Try sending it the following - I am not sure if you have to register with it
first.
Set cics-l mail
-Original Message-
From: IBM Mainframe Discussion List
The problem is whether or not you can just update one msg the way the example
shows.
The msgs have to be added to the file in a certain order, so I always recreate
the whole file with dd statements and
repros for each msg, even if not all the msgs are currently in SDFHMSGS (013
abends may
If you download the java 1.6 jdk from sun, the updatecenter directory contains
jh.jar.
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of
Ruegsegger, Jeff
Sent: Friday, July 16, 2010 2:23 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re:
cic...@listserv.uga.edu
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of
George Henke
Sent: Friday, July 16, 2010 4:11 PM
To: IBM-MAIN@bama.ua.edu
Subject: Are CICS Topics Handled here or elsewhere?
--
George Henke
(C) 845 401 5614
We are trying to find a way to dynamically change the color of a field before
displaying an ISPF panel.
Would anyone know how to do this.
Thanks list
Part of panel
)BODY
¬Pg.pge¬Prefix=prf ¬lmax¬CPU=c10 ¬by¬timr
If I want to Change color of by
Thanks Dave and Greg for the tips - we will check into them.
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of
Dave Salt
Sent: Monday, July 12, 2010 11:40 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: dyanamically changing color of ISPF panel
That is true - I have changed colors so that I wound up with the same color for
background and foreground - but the point is
that as long as we do our jobs correctly by changing the color, it is the
user's responsibility to view it, whatever color they see.
-Original Message-
From: IBM
? and the variable MYCOL must be set
to a valid value.
Warning: this does not work for fields in TBDISPL tables - never found out how
to change those...
Hope this helps,
Beate
-Original Message-
From: IBM Mainframe Discussion List
[mailto:ibm-m...@bama.ua.edu] On Behalf Of Barkow, Eileen
Sent
The stipulation is that no new products can be purchased, but if they were,
then the product to buy would
most likely be PageCenter from LRS - it picks up data from VPS which can then
be viewed and manipulated online.
-Original Message-
From: IBM Mainframe Discussion List
1 - 100 of 335 matches
Mail list logo
