John, hope you remember me…Seton Hall University and ‘How to recovery and
extend an HFS dataset in z/OS 1.4’ went it craped out.
I never forgot your help and how it got me out of the dog house those few
days…still have you notes.
I had no idea you were ill as I’ve haven’t been employed for
Well loose one gain one.
I saw a post on the z/VM list that the University of Maine just shut down their
mainframe operation.
--- On Thu, 1/7/10, Chase, John jch...@ussco.com wrote:
From: Chase, John jch...@ussco.com
Subject: Re: Korean bank Moves back to Mainframes (...no, not back)
To:
I think the answer to this (below) is that what we are looking at is not the
beginning of the end for z/Systems Programmers but the end of the beginning.
Ten releases from now (z/OS 20.x) and chimps will be able to do out jobs
because IBM will have altered things to the point where highly
It’s in creditable although not surprising.
The vendor must be getting $50-$60 an hour out of this.
--- On Thu, 11/12/09, Pinnacle pinnc...@rochester.rr.com wrote:
From: Pinnacle pinnc...@rochester.rr.com
Subject: IBM driving mainframe systems programmers into the ground
To:
Yes, and we all will have jobs in La La land.
--- On Thu, 11/12/09, Bill Fairchild bi...@mainstar.com wrote:
From: Bill Fairchild bi...@mainstar.com
Subject: Re: IBM driving mainframe systems programmers into the ground
To: IBM-MAIN@bama.ua.edu
Date: Thursday, November 12, 2009, 4:45 PM
Or
of my
friends are here
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]
On Behalf
Of Howard Rifkind
Sent: Sunday, October 18, 2009 4:45 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: Back to Work
Best of luck to you.
I'm sitting here with two
Best of luck to you.
I'm sitting here with two requests from IBM regarding Dubuque, Iowa positions.
My wife is really opposed to going out there at our ages. Family around these
parts (NYC Metro) and all that.
--- On Sun, 10/18/09, Eric Bielefeld eric-ibmm...@wi.rr.com wrote:
From: Eric
Ed, (smile) I contend there isn't any mainframe skills shortage.
z/VM, z/OS, SDF/Cobol/CICS/ DB2 and anything else you can think of.
With all the mainframe folks out of work now you could fill every standing
mainframe job opening in the contry and then some.
Who was the wise guy yelling
Jaffe edja...@phoenixsoftware.com wrote:
From: Edward Jaffe edja...@phoenixsoftware.com
Subject: Re: More bad news.
To: IBM-MAIN@bama.ua.edu
Date: Monday, September 28, 2009, 6:10 PM
Howard Rifkind wrote:
So now what's the ratio of real mainframes to
mainframe systems programmers in the USA
Don't mean to be harping on this but if you read the papers this morning or
checked out any of the web news sites you would of seen this:
U.S. job seekers exceed openings by record ratio
Something like 6 to 1 and if that's the case in the general job market it's
only worse for mainframe
Well, just that we would sell disaster recovery services and other services to
help support the operations.
Sysprogs out of would could subscribe, be given their own LPAR at specific
times with their own data and tinker for a while as they please.
Sort of like a subscription service with lower
Gain Critical Mainframe Skills
Grows To More Than 600 Universities
To: IBM-MAIN@bama.ua.edu
Date: Saturday, September 26, 2009, 10:52 AM
Sort like Sungard or Comdisco
..but more for the sysprog.
Scott J Ford
www.identityforge.com
From: Howard
Universities
To: IBM-MAIN@bama.ua.edu
Date: Saturday, September 26, 2009, 10:52 AM
Sort like Sungard or Comdisco
..but more for the sysprog.
Scott J Ford
www.identityforge.com
From: Howard Rifkind ibm_m...@yahoo.com
To: IBM-MAIN@bama.ua.edu
Sent
I used to think that there wasn't enough experienced (10-15+ years) out there
anymore.
But that was when I was working on a full time job and the economy hadn't
bellied up yet.
When I was laid off from a NYC bank I got a rude awaking as to how many of us
older folks are now out there looking
Phil,
How do I become a member of the group you listed below?
T.Y.
--- On Thu, 9/24/09, Phil Smith III li...@akphs.com wrote:
From: Phil Smith III li...@akphs.com
Subject: Very interesting discusion...
To: IBM-MAIN@bama.ua.edu
Date: Thursday, September 24, 2009, 7:18 PM
...going on at
Phil, please ignore found out how to do this.
thanks
--- On Fri, 9/25/09, Howard Rifkind ibm_m...@yahoo.com wrote:
From: Howard Rifkind ibm_m...@yahoo.com
Subject: Re: Very interesting discusion...
To: IBM-MAIN@bama.ua.edu
Date: Friday, September 25, 2009, 10:26 AM
Phil,
How do I become
Hope lots of you folks read this because it's right on target.
I've been thinking about getting together with a group of people and looking
into setting up a small mainframe with the latest software, z/VM, z/OS, CICS,
DB2 etc.
It would use z/VM as the base and run LPAR mode.
We would like to
Wonderful,
Now, after all these skills are acquired and these newbies without any
practical experience, entering a VERY limited mainframe market place are
competing with experience systems programmers with years of experience...what
happen?
Want cheap..hire a newbie low salary and what not.
Subject: Re: IBM Program To Help Students Gain Critical
Mainframe Skills Grows To More Than 600 Universities
On Thu, 24 Sep 2009 13:56:31 -0700, Howard Rifkind
ibm_m...@yahoo.com
wrote:
...
Want cheap..hire a newbie low salary and what
not.
Want to get the job done pick
In my comment what I should have made clear was that on the older system
everything is in sync with the older level and the newer system everything in
in sync for the upgraded system.
If I didn't make that clear then I should have...sorry about that.
--- On Wed, 9/9/09, Mark Zelden
I have a personal request from you folks on the list that attended Share.
I anyone at Share heard my name mentioned would you be kind enough to email me
off list.
Thanks.
Howard M. Rifkind
VuQuest Internet Services and Consulting, LLC.
?
(I didn't attend Share, so I can't help you).
Eric Bielefeld
Sr. Systems Programmer
Milwaukee, Wisconsin
414-475-7434
- Original Message -
From: Howard Rifkind ibm_m...@yahoo.com
Newsgroups: bit.listserv.ibm-main
To: IBM-MAIN@bama.ua.edu
Sent: Tuesday, September 08, 2009 4
Like everything else in this world, it depends.
One of my customers has a multi LPAR z9/BC system and one LPAR is reserved for
testing new RSU’s and any other added upgrades and functions.
After all of the above is installed, upgraded or whatever, it means nothing
unless you can do come
John,
Of course you are right.
But it's now and into the future about share holder value...to coin a phrase I
heard while working for Best Foods in Englewoodcliffs, N.J. ... from the
President of the North American Division O' by the way he was from Germany.
--- On Wed, 8/12/09, McKown,
Greetings all,
Please forgive the cross post with the z/VM list.
I’ve just read through the posts on Hercules (z/VM list).
I’ve heard about it but don’t know much about this software.
Does it run on a PC in Windows, Linux…what?
Is Hercules a shell for z/VM and/or z/OS and if so where does one
Interesting, I didn't think that back in '93 MVS 4.3 had a USS piece.
Or was it OS390 R1 or something like that.
--- On Sun, 7/19/09, Mary Anne Matyaz maryanne4...@gmail.com wrote:
From: Mary Anne Matyaz maryanne4...@gmail.com
Subject: Re: Mainframe hacking
To: IBM-MAIN@bama.ua.edu
Date:
I’ve been following this post and regarding 3390 mod 3’s, the bank I was
working for has an EMC whatever box and I know it has a bunch of storage.
Your can divide this storage up in any format you like 3’s 24’s, what not.
Why the operate with mod 3’s is beyond me it cause more problems then it
Would it be wonderful if IBM could just figure out how to make the FMID's
really directly relate the the software product name...
--- On Sat, 5/30/09, Richards, Robert B. robert.richa...@opm.gov wrote:
From: Richards, Robert B. robert.richa...@opm.gov
Subject: Re: FMID descriptions
To:
Kurt,
I also find this a pain in the a__. Is it still IBM's purpose to 'Make this
more difficult so we will understand it' You took something that worked real
well and messed it up.
How about two procedures, one for the z/OS-z/VM and one for HFS/OMVS/UNIX
fixes???
--- On Fri, 5/29/09, Kurt
Applicable component levels
R400 PSY UK40432 UP08/10/08 P F810
R500 PSY UK40433 UP08/10/08 P F810
I'm in the process of installing CICSTS32 and need one of the above PTF's
however I don't understand which one to pick.
Can someone tell me what the difference is between the
-
From: IBM Mainframe Discussion List On Behalf Of
Howard Rifkind
Applicable component levels
R400 PSY UK40432
UP08/10/08 P F810
R500 PSY UK40433
UP08/10/08 P F810
I'm in the process of installing CICSTS32 and need one
of the above
PTF's however I don't understand
Ron,
First, do you have a z/OS (1.7 - 1/10) running? You didn't mention that.
Second. If you do and it's a Cobol APP and you have the source code just take
the program and re compile it using the O/S Cobol compiler. Correct any syntax
errors correct the run JCL (from VSE to MVS) then move
I believe the 'Stop Run' statement just ends the program in VSE.
In a z/OS environment you want the program to return control back to the
O/S...a different world then VSE.
--- On Mon, 5/18/09, Bill Klein wmkl...@ix.netcom.com wrote:
From: Bill Klein wmkl...@ix.netcom.com
Subject: vse to z/os
Would any of you good folks know the email address of Rich Packer at AIG in
Livingston, N.J.?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET
Wacked again.
This time in less the a year, boy that makes two lost jobs in less then 18
months. What’s going on? Laid off in a 20% cut back.
Anyone on the list who has any knowledge of any z/VM or z/OS openings in the
NYC Metro area please be kind enough to advise off line.
Also, know any
with updated resume asap.
Thank you.
Sincerely yours,
Vera Etinger
(212) 710-5524
vetin...@infotechnologiesinc.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu]
On Behalf Of Howard Rifkind
Sent: Monday, April 06, 2009 9:49 AM
To: IBM-MAIN
Tell me about it.
The ax fell on Friday, for me it's the second time in less then 18 months.
Banking industry is in trouble all around.
--- On Mon, 3/30/09, esst...@juno.com esst...@juno.com wrote:
From: esst...@juno.com esst...@juno.com
Subject: More Layoffs ?
To: IBM-MAIN@bama.ua.edu
Greetings all,
Is there a command I can key in to z/OS to determine if the O/S was assigned an
I/P address?
Thanks
_
LEGAL NOTICE
Unless expressly stated otherwise, this message is confidential
and may be privileged. It is intended for the addressee(s) only.
Access to this E-mail
Sorry, bad subject name.
Howard Rifkind rifki...@emigrant.com 3/13/2009 10:23 AM
Greetings all,
Is there a command I can key in to z/OS to determine if the O/S was assigned an
I/P address?
Thanks
_
LEGAL NOTICE
Unless expressly stated otherwise, this message is confidential
Thanks all, that hit the spot.
Mark Zelden mark.zel...@zurichna.com 3/13/2009 10:37 AM
On Fri, 13 Mar 2009 10:23:21 -0400, Howard Rifkind rifki...@emigrant.com
wrote:
Greetings all,
Is there a command I can key in to z/OS to determine if the O/S was assigned
an I/P address?
From TSO: TSO
. Systems Programmer
Milwaukee, Wisconsin
414-475-7434
- Original Message -
From: Howard Rifkind rifki...@emigrant.com
Newsgroups: bit.listserv.ibm-main
To: IBM-MAIN@bama.ua.edu
Sent: Friday, March 13, 2009 9:35 AM
Subject: O/S IP Question.
Sorry, bad subject name.
Howard Rifkind rifki
Need some help with IEBCOPY,
I have a number of flat files which I want to copy to tape and then back down
to DASD on another system.
Would anyone out on the list have a sample job to do this which the are willing
to share?
Any help would be appreciated...Friday night and I would like to
as the input file.
HTH
HITACHI
DATA SYSTEMS
Raymond E. Noal
Senior Technical Engineer
Office: (408) 970 - 7978
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of
Howard Rifkind
Sent: Friday, March 13, 2009 2:17 PM
To: IBM-MAIN
the UNIT=HCRT and assigning
the dataset to a DASD volume, rather than a tape.
===
Wayne Driscoll
Omegamon DB2 L3 Support/Development
wdrisco(AT)us.ibm.com
===
Howard Rifkind rifki...@emigrant.com
Sent
.
===
Wayne Driscoll
Omegamon DB2 L3 Support/Development
wdrisco(AT)us.ibm.com
===
Howard Rifkind rifki...@emigrant.com
Sent by: IBM Mainframe Discussion List IBM-MAIN@bama.ua.edu
03/13/2009 05:03 PM
Please respond to
IBM Mainframe
Again thanks to all who chipped in on this.
The problem was for both IEBCOPY and IEBGENER an HLQ issue. It appears that I
can't allocate tape datasets with my HLQ.
My manager gave me one which worked out.
Lizette Koehler stars...@mindspring.com 3/13/2009 7:21 PM
Howard,
I would think
Boy, must be these senior moments getting to me again, forgot about that.
Lizette Koehler stars...@mindspring.com 3/13/2009 7:32 PM
Howard,
One more point. I went back through the IBM Main Archives and you had this
same issue on Oct 2008 and Dec 2008. I did not see how you resolved the
issue
Hello all,
Just got the z/OS 1.10 system up and the command line for SDSF is on the bottom
of the panel.
I don't remember how to get this to the top of the panel.
Any help is appreciated.
Thanks.
_
LEGAL NOTICE
Unless expressly stated otherwise, this message is confidential
Thanks all,
Did the settings for the ISPF panels and that worked but it didn't carry over
to SDSF.
In SDSF did what was suggested (settings) and all is O.k. now.
thanks again.
Mark Zelden mark.zel...@zurichna.com 3/11/2009 1:15 PM
On Wed, 11 Mar 2009 12:59:19 -0400, Howard Rifkind rifki
I have the following entry in my USSTAB:
P39TMMVS USSCMD CMD=P39TMMVS,REP=LOGON,FORMAT=BAL
USSPARM PARM=APPLID,DEFAULT=TMONMVS
When I key in P39TMMVS we are really getting TMONMVS as the executable.
What I don't understand is what path is followed to execute TMONMVS?
Any help
Natalie, how do I get my hands on one of these or subscribe?
T.Y.
--- On Thu, 2/5/09, Natalie Boike nbo...@msptechmedia.com wrote:
From: Natalie Boike nbo...@msptechmedia.com
Subject: Mainframe Memories
To: IBM-MAIN@bama.ua.edu
Date: Thursday, February 5, 2009, 9:35 AM
Hello all,
I
Below is an example of a current entry in my PROG00 member
APF ADD DSNAME=CCPLUS.REV202.A.LOADLIB VOLUME=PLT040
I have a library which is quite long, but less then 44 characters and what I
would like to know is this:
Can I use DSN= instead of DSNAME= and can I use VOL= instead of
BTW
Forgot to add, can I split the line into 2 lines??? How?
--- On Sat, 2/7/09, Howard Rifkind ibm_m...@yahoo.com wrote:
From: Howard Rifkind ibm_m...@yahoo.com
Subject: Adding entries to the APF List in Parmlib Question
To: IBM-MAIN@bama.ua.edu
Date: Saturday, February 7, 2009, 6:01 PM
YES to all of the above.
Under pressure right now from the boss ... had to go to the video tape (z/OS
initialization and Tuning Reference page 613, my manual level)
--- On Sat, 2/7/09, Howard Rifkind ibm_m...@yahoo.com wrote:
From: Howard Rifkind ibm_m...@yahoo.com
Subject: Re: Adding
Hello all,
I have a number PTF's which have to go on the system for several of the ASG
monitor products.
I know as a fact that these fixes with add and/or change members in a SAMPLE
PDS.
However when I do an APPLY/CHECK the DD for the sample library doesn't appear.
When I do the actual
Larre,
Much thanks for the explanation.
Larre Shiller larre.shil...@ssa.gov 1/23/2009 5:24 PM
Howard -
I believe that is because SMP/E does not OPEN the data sets for an APPLY
CHECK. That's why an APPLY CHECK can end with a CC 0, yet when the
SYSMODs are actually applied, the data set can
Hello all,
I would like to back out and redo every thing done by the smpe run below.
How could I go about this? Retry/Redo did nothing.
//SMPCNTL DD *
SETBOUNDARY(LM2PWMT) OPTIONS(OPTLMK) .
APPLY
APARS
Lizette
Thanks for the suggestions...I'll check out the redo.
Lizette Koehler stars...@mindspring.com 1/22/2009 5:59 PM
Howard,
The way I would approach this is to identify each and every PTF that was
applied. Then create a RESTORE of each and every ptf. This will take time
as anything
We got the following running some various CICS transactions on z/OS 1.6 /
CICSTS 2.2
I ran the job listed below but couldn't find the entry for this dataset.
It looks like SMS is generating this but looking at ISMF I couldn't find how
and where this is being defined.
Any help in resolving
There is or used to be a product from IBMLink (Software Excel) called AskQ.
It was a COST FUNCTION of IBMLink where you could email these people various
technical questions and they would respond.
I can't find where or how to contact some one regarding this service.
Anyone have any phone
Any idea what this costs?
Just for the ETR piece of the pie.
Scott Rowe scott.r...@joann.com 1/5/2009 2:06 PM
I hope you have DEEP pockets ;-)
Howard Rifkind rifki...@emigrant.com 1/5/2009 12:55 PM
There is or used to be a product from IBMLink (Software Excel) called AskQ.
It was a COST
Thanks all,
I'll reorder the parms so SYSPROGX is first...
--- On Sat, 12/27/08, Ed Finnell efinnel...@aol.com wrote:
From: Ed Finnell efinnel...@aol.com
Subject: Re: SDSF Question
To: IBM-MAIN@bama.ua.edu
Date: Saturday, December 27, 2008, 12:39 PM
In a message dated 12/27/2008 11:32:19
Hello all,
Below is an entry I placed is the ISFPARM's file in order to create a new group
for anyone who is listed under the NTBL NAME(SYSPRGSX). There is only one
entry in NTBLENT. This was done in order for various people to do the SDSF LOG
command and have the log come up at column 51.
1830 East Paris, Grand Rapids, MI 49546 MD RSCB1G
p 616.653.8429
f 616.653.8497
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Howard Rifkind
Sent: Friday, December 26, 2008 3:10 PM
To: IBM-MAIN@bama.ua.edu
Subject: SDSF Question
Hello
616.653.8497
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Howard Rifkind
Sent: Friday, December 26, 2008 3:35 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: SDSF Question
Thanks David,
The problem is that when user E18823 logs into SDSF
To Say Thank You to all on this list.
YouR help through out this year and all past years has been invaluable and I
can't mention how many times you have kept me above water.
So...THANKS AGAIN
--
For IBM-MAIN subscribe
Hello,
Can anyone tell me what I'm missing on the JCL below. Job keeps asking for a
space parameter.
//STEP1 EXEC PGM=IDCAMS
//SYSPRINT DD SYSOUT=*
//RECEIVE DD DSNAME=E18823.TDB.SYSPROG.SYMD.CAVHPROT.CLUS,
//
I just can't remember...senior moment!
I remember doing an ISPF 3.4 and some how being able to see which users/jobs
have a particular dataset allocated to them.
Can anyone refresh my memory whith this how to?
Thanks.
_
LEGAL NOTICE
Unless expressly stated otherwise, this
Keyed in WHOHAS on the option line and it was invalid...DSN is on the DSname
line.
Lucy Arnold [EMAIL PROTECTED] 11/20/2008 10:31 AM
WHOHAS
Lucy Arnold
Storage Manager
U.C. Davis Medical Center
916-734-5498
--
For IBM-MAIN
Hello all,
I'm having problems with a GDG definition/datasets.
I use the following JCL to set the GDG up:
//DEFGDG EXEC PGM=IDCAMS
//SYSPRINT DD SYSOUT=*
//SYSINDD *
DEF GDG(NAME('PCYC.TMVHSTM.TMVS04.IRR')
Sorry for the typo, this should have been:
DUMPIN DD DISP=SHR,DSN=PCYC.TMVHSTM.TMVS04.IRR NOT TMVS01
Howard Rifkind [EMAIL PROTECTED] 11/14/2008 5:42 PM
Hello all,
I'm having problems with a GDG definition/datasets.
I use the following JCL to set the GDG up:
//DEFGDG EXEC PGM=IDCAMS
PROTECTED] On
Behalf Of Howard Rifkind
Sent: Friday, November 14, 2008 5:43 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: GDG QUESTION
Hello all,
I'm having problems with a GDG definition/datasets.
I use the following JCL to set the GDG up:
//DEFGDG EXEC PGM=IDCAMS
//SYSPRINT DD SYSOUT
Thanks
_
LEGAL NOTICE
Unless expressly stated otherwise, this message is confidential
and may be privileged. It is intended for the addressee(s) only.
Access to this E-mail by anyone else is unauthorized.
If you are not an addressee, any disclosure or copying of the
contents of this
Yep...I think that's what I was thinking about but forgot.
BTW, how do you also copy the alias?
Thanks.
Vernooy, C.P. - SPLXM [EMAIL PROTECTED] 11/7/2008 2:46 AM
Howard Rifkind [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]...
Hello all,
I'm missing a load module from
Hello all,
I'm missing a load module from a loadlib.
I found it in another loadlib and I'd like to know if there would be any sort
of issues just copying to the target loadlib I need?
I thought in some where in the past some told me there could be an issue but
right not I can't remember
Good first choice.
Hope all goes well.
Keep us posted...
Ed Gould [EMAIL PROTECTED] 11/2/2008 1:17 PM
Sorry to break in but just wanted every one to know that the surgery has been
delayed. The doctors want to see if it can be treated by medicine instead if it
can't then surgery will
,KEEP)
Howard Rifkind [EMAIL PROTECTED] 10/30/2008 3:48 PM
Spoke with them for about 30 minutes...they think it might have something to
with the Tape manager ... RMM but that's as far as we got.
Cebell, David [EMAIL PROTECTED] 10/30/2008 3:38 PM
Innovations has wonder Tech
Hello,
This might not be the right list for this question but here goes.
A CICS region which is part of an MRO group isn't shutting down after a 'p
shut immed'
The other two regions TOR and an AOR did shutdown with the above command but
this one is hung.
From an SDSF console I keyed in
Pat, how would I do this...?
Force ASID???
Pat Mihalec [EMAIL PROTECTED] 10/31/2008 5:45 PM
You can force it down.
Pat Mihalec
Rush University Medical Center
Senior System Programmer
(312) 942-8386
[EMAIL PROTECTED]
--
For
I'm trying to use the FDRABR scratch facility to restore a deleted dataset.
An FDR print report showed that the dataset had been properly backed up and all
the information needed appeared to be in the report for the indicated dataset.
However I can't seem to be able to get the job to run due
Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Howard Rifkind
Sent: Thursday, October 30, 2008 2:25 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Generic Device Names and FDR
I'm trying to use the FDRABR scratch facility to restore a deleted
dataset.
An FDR print report showed
-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Howard Rifkind
Subject: Generic Device Names and FDR
I'm trying to use the FDRABR scratch facility to restore a deleted
dataset.
An FDR print report showed that the dataset had been properly backed up
and all
Hello all,
I have a whole bunch of JCL files on my PC and would like to get them over to a
library in my user id in z/OS.
I could do this one member at a time but it would take forever.
Any suggestions how to do all the members in one fell swoop would be
appreciated.
Thanks.
this e-mail and
any attachments without reading, forwarding or saving them. Thank you.
From:
Howard Rifkind [EMAIL PROTECTED]
To:
IBM-MAIN@BAMA.UA.EDU
Date:
10/29/2008 01:16 PM
Subject:
FTP MEMBERS FROM PC TO MAINFRAME (HOW TO)
Sent by:
IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU
Would one of you fine folks be good enough to send me the url used to sign up
for the CICS listserv?
Thanks.
_
LEGAL NOTICE
Unless expressly stated otherwise, this message is confidential
and may be privileged. It is intended for the addressee(s) only.
Access to this E-mail by
Thanks all...
Ed Finnell [EMAIL PROTECTED] 10/28/2008 1:15 PM
In a message dated 10/28/2008 11:59:29 A.M. Central Daylight Time,
[EMAIL PROTECTED] writes:
Would one of you fine folks be good enough to send me the url used to
sign
up for the CICS listserv?
When I edit a file I keep getting the following even when I key in 'RECOVERY
ON'.
-Warning- The UNDO command is not available until you change
your edit profile using the command RECOVERY ON.
While in the edit menu I key in PROFILE and get the following:
=PROF SAMPJCL (FIXED
Thanks Steve...that did it.
Steve Comstock [EMAIL PROTECTED] 10/24/2008 10:36 AM
Howard Rifkind wrote:
When I edit a file I keep getting the following even when I key in 'RECOVERY
ON'.
-Warning- The UNDO command is not available until you change
your edit profile using
I got the message below while trying to perform a sort.
The Sortin concatenation is below.
Does this look correct and if not what's wrong with it?
Thanks.
ICE099A 0 BLDL FAILED FOR SORTIN DATA SET
ICE751I 1 D8-Q83041 D4-Q84357 E8-Q95214
//SORT EXEC PGM=SORT,REGION=4096K
: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf
Of Howard Rifkind
Sent: Thursday, October 16, 2008 12:51 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Message ICE099A ... Need Help
I got the message below while trying to perform a sort.
The Sortin concatenation is below.
Does
Thanks all,
Two members are missing from SYSESB.TMON0832.STRSVC20.LMKCBLK
Thanks all for you help.
I don't have the messages manual, I'll have to download these manuals tonight.
Howard Rifkind [EMAIL PROTECTED] 10/16/2008 2:32 PM
Just this one..
Scott Ford [EMAIL PROTECTED] 10/16/2008
How can I trace back and find out which IEASYSxx member the system was IPL'ed
with?
If you don't key in a member name at IPL time doesn't the system pick IEASYS00?
Thanks.
_
LEGAL NOTICE
Unless expressly stated otherwise, this message is confidential
and may be privileged. It is
Thanks all for you quick replies...
Alvaro Quintupray [EMAIL PROTECTED] 10/15/2008 3:46 PM
Hi.
Here there is a REXX ( IPLINFOFrom Marc Zelden )
http://home.flash.net/~mzelden/mvsutil.html
Atte.
Alvaro Quintupray.
-Mensaje original-
De: IBM Mainframe Discussion List
Thanks...been there done that and still NO Go
Mohd Shahrifuddin [EMAIL PROTECTED] 10/8/2008 1:07 AM
Dear Howard,
How about try to delete using VVR option. May be can help.
--
For IBM-MAIN subscribe / signoff / archive access
Hello all,
I'm trying to delete the following datasets:
PDB.SYSPROG.TMON.LMCICS.V22.VTCECNTL *VSAM*
PDB.SYSPROG.TMON.LMCICS.V22.VTCECNTL.DATA OPSPR2
PDB.SYSPROG.TMON.LMCICS.V22.VTCECNTL.INDEX OPSPR2
For the first one a 'D'
] On
Behalf Of Howard Rifkind
Sent: Tuesday, October 07, 2008 3:22 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Help with deleting datasets which are not cataloged or don't
exist.
Hello all,
I'm trying to delete the following datasets:
PDB.SYSPROG.TMON.LMCICS.V22.VTCECNTL *VSAM
Tried that also, No Go.
Jack Kelly [EMAIL PROTECTED] 10/7/2008 4:34 PM
This has been talked about numerous times, try the archives.
Easiest way is to recatalog the DSN and then delete it (hopefully no BCS
name issue) if you don't have one of the catalog products.
Jack Kelly
202-502-2390
not be cataloged, how else could it have
been displayed?
Howard Rifkind [EMAIL PROTECTED] 10/7/2008 4:22 PM
Hello all,
I'm trying to delete the following datasets:
PDB.SYSPROG.TMON.LMCICS.V22.VTCECNTL *VSAM*
PDB.SYSPROG.TMON.LMCICS.V22.VTCECNTL.DATA
There is an entry there but that's all.
Howard Rifkind [EMAIL PROTECTED] 10/7/2008 5:57 PM
Yes it was.
Here is the listing from a LISTCAT.
CLUSTER --- PDB.SYSPROG.TMON.LMCICS.V22.VTCECNTL
DATA --- PDB.SYSPROG.TMON.LMCICS.V22.VTCECNTL.DATA
INDEX
.
Howard Rifkind [EMAIL PROTECTED]
Sent by: IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU
08/10/2008 08:57 AM
Please respond to
IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU
To
IBM-MAIN@BAMA.UA.EDU
cc
Subject
Re: Help with deleting datasets which are not cataloged or don't exist
1 - 100 of 412 matches
Mail list logo