Yes, certainly. It's beyond my belief that people keep replying to this thread!
Regards,
Thomas Berg
___
Thomas Berg Specialist AM/SMS SWEDBANK AB (publ)
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List
.
Well, here I learned something new! Finally a usage for SysReq!
Regards,
Thomas Berg
__
Thomas Berg Specialist AM/DQS SWEDBANK AB (publ)
--
For IBM-MAIN subscribe
There will always exist the solution to pay good enough money that talented
programmers can solve this problem.
A good programmer/analyst is not hindered (long) by unknown coding language.
The problem is companies that don't understand this.
Regards,
Thomas Berg
HILARIOUS! :D
Regards,
Thomas Berg
__
Thomas Berg Specialist AM/DQS SWEDBANK AB (publ)
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Edward Jaffe
Skickat: den 2 maj 2012 19
research to get the right person.
But CIOs today isn't interested as they are constantly looking at the next step
in their careers.
Regards,
Thomas Berg
__
Thomas Berg Specialist AM/DQS SWEDBANK AB (publ
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
R.S.
Skickat: den 27 april 2012 11:04
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: SV: Mainframe Skills Scarce? (z/OS Mainframe CA Product
training ...)
W dniu 2012-04-27 10:35, Thomas Berg
is a Swedish word for deceive.
:)
Regards,
Thomas Berg
__
Thomas Berg Specialist AM/DQS SWEDBANK AB (publ)
--
For IBM-MAIN subscribe / signoff / archive access instructions
Have You tried with the '?' command ?
Regards,
Thomas Berg
__
Thomas Berg Specialist AM/DQS SWEDBANK AB (publ)
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Miklos
I mean just/only '?'.
Regards,
Thomas Berg
__
Thomas Berg Specialist AM/DQS SWEDBANK AB (publ)
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Miklos Szigetvari
Skickat: den
Ok, I can't see the PS window here due to sec. block.
But I supposed that You got other columns in the window as with e g the H
window through the '?' command.
Regards,
Thomas Berg
__
Thomas Berg Specialist AM/DQS SWEDBANK AB (publ
An important note is that the rexx code is indentation sensitive, it must obey
the same indentation rules as the other panel code. Otherwise a S0C4 abend is
nearly sure.
Regards,
Thomas Berg
__
Thomas Berg Specialist AM/DQS SWEDBANK
,
on 04/16/2012
at 03:42 PM, Thomas Berg thomas.b...@swedbank.se said:
(BTW, How do You imagine the behavior if the Signal DID NOT trash
the DO nesting?
The Devil is in the details. Contrast Rexx with PL/I. In PL/I a SIGNAL
invokes an ON-unit as a subroutine. The On=unit can return
An alternative is to have e g an 88-type LEAVE item that is checked for every
code-block including all iterations and selections.
(You set leave to true when wanting to do a leave type jump.)
Regards,
Thomas Berg
__
Thomas Berg Specialist
.)
Regards,
Thomas Berg
__
Thomas Berg Specialist AM/DQS SWEDBANK AB (publ)
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Paul Gilmartin
Skickat: den 16 april 2012 16:33
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: SV: GO TO cobol
On Mon, 16 Apr 2012 15:42:12 +0200, Thomas Berg wrote:
Rexx is a nightmare here
or Cindy Crawford?
Last, bit not least: Athlon, or Pentium sounds much better than CMOS
11S.
--
Radoslaw Skorupka
Lodz, Poland
I would then suggest names more like: zEUS, HERA, HERMES, GILGAMESH, etc. :)
Regards,
Thomas Berg
__
Thomas
://
mailto:
news:
telnet://
Regards,
Thomas Berg
__
Thomas Berg Specialist AM/DQS SWEDBANK AB (publ)
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För Shmuel
Metz (Seymour J.)
Skickat
and the second was global for
option2.)
BTW, In rexx if you check for an existing parm would rexxfunc(arg1,,arg3)
have a *non-existing* arg/parm nr 2 but rexxfunc(arg1,'',arg3) would have and
*existing*, but empty arg/parm nr 2.
Regards,
Thomas Berg
-Ursprungligt meddelande-
Från: IBM
Is there a way to get internet links to work from 3270 using PCOM ?
E g You have the text: http://ibm.com in a panel, click on it and the link
opens in the browser.
Regards,
Thomas Berg
__
Thomas Berg Specialist AM/DQS SWEDBANK AB
Thanks, it worked! But what are the rules for PCOM to identify it as a
hyperlink ?
Must You have the format http://etc or could you other formats ?
(Thinking of having links with underlined descriptive texts rather than the URL
visible.)
Regards,
Thomas Berg
Thanks. (I didn't find it in the help, except about URL hotspots in general.
Could be because I have a Swedish translated version (ver 5.6)).
Regards,
Thomas Berg
__
Thomas Berg Specialist AM/DQS SWEDBANK AB (publ
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För Paul
Gilmartin
Skickat: den 20 mars 2012 15:45
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: SV: Theology question
On Tue, 20 Mar 2012 10:54:50 +0100, Thomas Berg wrote:
The only alternative (as seen
,
Thomas Berg
__
Thomas Berg Specialist AM/DQS SWEDBANK AB (publ)
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För Phil Smith
Skickat: den 20 mars 2012 16:34
Till: IBM-MAIN@bama.ua.edu
...
Smart. I'm using it now. Thanks!
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
Thanks! Interesting variant of SDSF access. I'm so used with the rexx
interface that I haven't thought of the more direct way.
(I got the rexx way to work thanks to an example by Miklos Szigetvari.)
Regards,
Thomas Berg
_
Thomas Berg Specialist
Is there any possibility to duplicate the output to SYSOUT to another
Ddname/DSname in realtime ?
I want to follow the execution by inspecting the output but at the same time
save it for processing in a following step.
Preferably by JCL means.
Regards,
Thomas Berg
under IKJEFT01.)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Vernooij, CP - SPLXM
Skickat: den 27 februari 2012 14:44
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Steve Comstock
Skickat: den 27 februari 2012 14:58
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: Duplicating SYSOUT output to another DD/DSN in realtime ? (JCL)
On 2/27/2012 4:18 AM, Thomas Berg
in the beginning.
Maybe I should go back to the drawing board...
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
--
For IBM-MAIN subscribe / signoff / archive access
:18 AM, Thomas Berg wrote:
Is there any possibility to duplicate the output to SYSOUT to another
Ddname/DSname in realtime ?
I want to follow the execution by inspecting the output but at the
same
time save it for processing in a following step.
Preferably by JCL means.
Regards
Regarding even if the job is still running, is that true ? When I tried that
last time I couldn't get hold of the output as long as the job was running.
Exactly how do You do that ? (E g which ISF-commands etc.)
Regards,
Thomas Berg
_
Thomas Berg
Well that's what I did (IIRC), but I didn't get the ds, I think I got an in
use msg when doing the SA.
But if You can get this to work so must I be able to do. Will maybe try it
again.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M
It seems to me more convenient to have an edit macro that make comments of a
step.
Something like: COMSTEP stepname and ACTSTEP stepname (to de-comment the
step).
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
corner)
- Press ENTER and the go to the application You want to debug
- After execution (e g after the unsuccessful S selection), go to: 5 Log
Browse ISPF log (still under ISPF option 7, Dialog Test)
- You may see interesting logdata near the bottom
YMMV
Regards,
Thomas Berg
Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Hansen, Dave L - Eagan, MN
Skickat: den 15 februari 2012 21:08
Till: IBM-MAIN@bama.ua.edu
Ämne
Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On
Behalf Of Thomas Berg
Sent: Monday, February 13, 2012 5:11 AM
To: IBM-MAIN@bama.ua.edu
Subject: SV: Archaic allocation in JCL (Was: Physical record size query)
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion
with very generous SPACE
allocations (for
every allocation) ?
Regards,
Thomas Berg
So the question becomes where to define space? The system cannot think
like a human. It usually needs a place to start. So IBM provided some
solutions.
Please! Requirement of space do not need any
automatically, why not introduce
a new keyword like e g SPACE=ANY ?
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
--
For IBM-MAIN subscribe / signoff / archive
to many variants of
datasetnames and to many different needs for space depending on time, date and
subgrouping within applications.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
My variant is faster to write! ;)
(BTW, with my idea only needed space is allocated, there is no unused
preallocated space.)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Vernooij, CP - SPLXM
Skickat: den 13 februari 2012 14:22
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: Archaic allocation in JCL (Was: Physical record size query)
Thomas Berg thomas.b
interface.)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För R.S.
Skickat: den 13 februari 2012 14:49
Till: IBM-MAIN@bama.ua.edu
, Thomas Berg wrote:
I can't understand why we STILL need to specify SPACE= (etc) for an
allocation of a dataset.
You normally don't do that in other OS (platforms), You always (both
principally and in practice) want to allocate as much as is needed during
execution
Can you use UNIX files
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För R.S.
Skickat: den 13 februari 2012 15:49
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: SV: SV: Archaic allocation in JCL (Was: Physical record size
query)
W dniu 2012-02-13 15:21, Thomas Berg
+0100, Thomas Berg wrote:
Can you use UNIX files (zFS) for your purposes and avoid the archaism?
Not practically. But that would be a circumvention, not a solution as I
see it.
When something doesn't work as desired, and it's impractical to fix it
(R.S. appears to understand the design
I'm beginning to wondering... :)
But I started in februari 1979...
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Frank
by some recent contacts with development labs at IBM
give me the impression that IBM lacks contact with the reality out here... ;)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe
for that envrionment. At least 'dynamic'
during logon, not during the life of the session.
Kees.
Thomas Berg thomas.b...@swedbank.se wrote in message
news:a90e503c23f97441b05ee302853b0e62616721c...@fspas01ev010.fspa.myntet.
se...
The original case by Juergen touches the main shortcoming of IBM's
) was a product called
ProEdit.
BTW, what do You mean by prefixed the library ?
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
--
For IBM-MAIN subscribe
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Elardus Engelbrecht
Skickat: den 25 januari 2012 13:17
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: STEPLIB problems - was: PDSE
Thomas Berg wrote:
There are cases when putting steplib(s
.
Which means that it's unusable except as an alternative to different logon
procs - with the inconvenience to have to issue the command(s) every logon...
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
.fspa.myntet.se,
on 01/25/2012
at 11:43 AM, Thomas Berg thomas.b...@swedbank.se said:
This happens when You must use conflicting software or software
versions.
For that case, why can't you set it up from the READY prompt prior to
going into ISPF?
Because I need to use both at the same
Yes, I'm aware of that.
With open eyes...
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Juergen Keller
Skickat: den 25
eMODE . . . (LINE, FSCR, or blank) e
DM
And then continue from there.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M
think USD are cheap now, wait until Uncle Ben's Funny Money gets
into circulation.
:-(
Well, for the moment there is a very tough and competitive race to the bottom
in the currency markets. ;)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M
Seems Yes, but is not. Many are just after valuables and not the car. So with
not locking (and not have any valuables in the car), You usually don't have any
damage.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
key? :)
Brian
I know of people that don't lock their cars - to avoid damage if someone wants
to get into the car.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
and said No, it isn't! Fix the
bleep compiler!! I refued to talk with him ever again.
He was a complete idiot.
Really ? I don't think so. There is always somewhere an idiot with some
additional feature, thus a *more* complete idiot!
Regards,
Thomas Berg
.fspa.myntet.se,
on 12/08/2011
at 03:13 PM, Thomas Berg thomas.b...@swedbank.se said:
Note that if You e g is using IDCAMS for allocating/deleting datasets
it's even today under the radar as seen from the initiator.
AMS uses DYNALLOC, so it's not under the radar.
It's under the radar
It's not neccssary so that Your password is cracked. I would suspect that they
just fake the From: address!
(To get it onto the list.)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM
...@fspas01ev010.fspa.myntet.se,
on 12/09/2011
at 10:28 AM, Thomas Berg thomas.b...@swedbank.se said:
It's under the radar when the job cards is read and interpreted.
Read the message again. In particular, as seen from the initiator.
Ok, If I rephrase it like: as seen from the initiator before
personnel in general - but first and foremost accepted
universally or at least by
the majority of vendors et al.
And here we stumble on the fact that everything (more or less) in this world is
proprietary and
dependent of IBM...
Regards,
Thomas Berg
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För Tom
Marchant
Skickat: den 8 december 2011 14:36
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: JCL sheesh! for today
On Thu, 8 Dec 2011 14:18:06 +0100, Thomas Berg wrote:
From my naive
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För Paul
Gilmartin
Skickat: den 8 december 2011 15:34
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: SV: JCL sheesh! for today
On Thu, 8 Dec 2011 15:13:04 +0100, Thomas Berg wrote:
the dynamic
Or rather someone that is faking the From: address.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För Aled
Hughes
Skickat
FWIW, I have a REXX function coded in asm for MD5 checksums running it in MVS
(EBCDIC).
(Coded by Leland Lucius)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
About the 2250, a link with a photo of the wonder in action:
http://www.columbia.edu/cu/computinghistory/2250.html
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
begun using a fork at the meals etc ?
No offense please, I really admire You old wrecks!
;)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
--
For IBM-MAIN subscribe
09:15:22 IAT4810 JOB TERMINATED BY JES JSTTEST FACILITY
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
--
For IBM-MAIN subscribe / signoff / archive access
Got a ECA1004E error message when trying to recall a dataset.
Didn't found it through IBM LookAt and it seems there is no DFHSM message
manual.
A hint of direction would be grateful.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För Lutz
Hamann
Skickat: den 27 oktober 2011 12:05
Till: IBM-MAIN@bama.ua.edu
Ämne: Re
That's obvious if You think before You write. An outrageous requirement.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Thanks, it's the space cowboys problem now.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Staller, Allan
Skickat: den
, how do You specify version in the JCL ?
I mean in the same way we specify latest generation by aaa(0)
and a new by aaa(+1) etc.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För R.S.
Skickat: den 26 oktober 2011 12:29
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: SV: GDG
W dniu 2011-10-26 12:09, Thomas Berg pisze:
-Ursprungligt meddelande-
Från: IBM Mainframe
Could You post a corrected version of the code, please ?
:)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Gerhard
That was to Gerhard Postpischil.
He had suggestions for improving it so I thought it would be valuable to see
his code variant.
:)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM
Try: in ISPF Setting: Screen format 3 (1. Data)
(Note 3)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Monika Amiss
Are there any ways to get DCB information and/or space allocation for an
allocated temporary dataset (You know the ddname but not much more) ?
(E g in a TSO environment.)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
Ouch! Have totally forgotten that. (Blushing...)
(Too simple!)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Binyamin
application 2 which requires the same DDname (for dataset CCC.DDD).
This is just *one* example.
Is it a matter of editing the TIOT, or ?
Hälsn Thomas
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För Walt
Farrell
Skickat: den 7 oktober 2011 17:00
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: Rename of DDname ?
On Fri, 7 Oct 2011 15:45:50 +0200, Thomas Berg thomas.b...@swedbank.se
wrote
See my previous answer/post.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Elardus Engelbrecht
Skickat: den 7 oktober
No. That frees the existing allocation of datasets, which is what I want to
avoid.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN
.fspa.myntet.se,
on 10/07/2011
at 03:45 PM, Thomas Berg thomas.b...@swedbank.se said:
Are there any way to rename a ddname ? By that I mean leaving the
allocation as such untouched but the name of the allocation/DDname
is changed.
Yes, there's an old facility in DAIR. I assume that it uses
Thanks, will look at that when I don't get network error when trying to reach
IBM manuals.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN
the data in cataloged datasets that would be allocated and
reallocated during the execution. Which would require more resources and
finishing deletes (as it's logical temporary files).
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
Yes, I'm doing just that now.
Pity if it's no other way..
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Edward Jaffe
...@fspas01ev010.fspa.myntet.se,
on 09/09/2011
at 09:39 AM, Thomas Berg thomas.b...@swedbank.se said:
Is there a more convenient way to do this other than generate REPLACE
cards for the BINDER and - in this example - run it three times.
Why run it three times? Run it once with three INCLUDE statements
and - in this example - run it three times.
(Other than writing an assembler program using IEW macros.)
I have to do this for several thousands of load modules.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Miklos Szigetvari
Skickat: den 9 september 2011 10:54
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: How to splitting loadmudules
On 9/9/2011 9:39 AM, Thomas Berg wrote:
I have a need to split
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Binyamin Dissen
Skickat: den 9 september 2011 12:06
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: How to splitting loadmudules
On Fri, 9 Sep 2011 11:49:28 +0200 Thomas Berg thomas.b
As I understand, the delinkers (there seems to be several) just produces object
decks from load modules/CSECTs.
Will not help me
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
much, I think.
-Ursprungligt meddelande
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För Tom
Marchant
Skickat: den 9 september 2011 13:30
Till: IBM-MAIN@bama.ua.edu
Ämne: Re: SV: How to splitting loadmudules
On Fri, 9 Sep 2011 12:11:37 +0200, Thomas Berg wrote:
There's
There is no missing CSECTs ?
(I'm using NOCALL, in the example by Tom below there would be bare/NOCALL
modules: X, Y, Z and N. And maybe Y(2) and Z(2) which would be placed on
another loadlib.)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M
I'm not going to RUN these delinked modules!
They are just for the BIND MANAGER to read and search for whatever (contoken I
assume).
(They are just indata here.)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
. - will be put in production are stability
and time important factors.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
McKown
Thanks! I will try it. (Although I have to test this thoroughly as I must be
sure BIND MGR can handle it.)
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion
The behavior below is probably because the % (percent) char I the name - it's
interpreted as a member name mask... Duh!
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe
Thanks! Found it already.
Regards,
Thomas Berg
_
Thomas Berg Specialist A M SWEDBANK
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] För
Steve Comstock
Skickat: den 19 augusti 2011 13
1 - 100 of 405 matches
Mail list logo