Dear All
I have problem with mails that their recipients are [EMAIL PROTECTED]
These mails are stucked in the qeueu and at last are returned to the sender.
In iMail system log, I can see 'MX connect fail' prompt for yahoo IP
addresses.
All other mails are sent correctly.
can any one tell me what
There is another problem which Imail has when someone from yahoo forward you an email
with picture attachement (jpeg for example).
Dan
-- Original Message --
From: "Massoud Mazar" [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
Date: Thu, 18 May 2000
I know that you can program Norton antivirus 2000 to run automated tasks so
I don't see any reason it couldn't scan all the incoming mail folders
periodically
Steve Hagerman
[EMAIL PROTECTED]
http://www.advancedisp.com
http://www.asr.cx
http://www.bestdeals4u.net
winmail.dat
Problem is it grabs files that have only partialy been written etc and
causes IMail to go nuts. IMHO. Thats what happened to me, we just gave up
and are waiting for time to do a mail gateway setup.
Gerry
At 03:38 AM 5/18/2000 -0400, Steve Hagerman wrote:
I know that you can program Norton
We are a college with some 150 staff and 2000 full time students. We are
using IMail 6.03 mainly for staff email, but want to give accounts to
more students this summer. Most users access their mail using POP3 with
Netscape 4.7 client software within the college and the web front end
for
So sorry, you're right, Gordon.
As I recall, we had this problem when using IE as the browser, but not
Netscape. I ended up switching IMail to use the standard secure port - 443.
Of course, this will give you a problem if you have another Web server
running on the same box using that as its
else. I asked Ipswitch and they suggested restricting relay to local
users which I've done.
I really wish they'd stop recommending that. There are plenty of
ignorantly open mail relays already. All mail headers are easily spoofable,
so the only reliable anti-relay defense is relay for
We experienced a problem with mailall recently that not all of
our users recieved a mail when we spammed that mail thru mailall.
has anyone experienced this problem ?
When I tried using mailall (which I am afraid to try again), there were two problems
with it. First, using NT
Have a client who received this message, didn't send it?
Can anyone help me with an explanation of some kind
Thnax
--- SNIP
-- Original Message --
From: Administrator [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
Date: Tue, 16 May 2000 18:12:39 +0200
I have problem with mails that their recipients are [EMAIL PROTECTED]
These mails are stucked in the qeueu and at last are returned to the
sender. In iMail system log, I can see 'MX connect fail' prompt for
yahoo IP addresses.
This is because the Yahoo mail servers are down. Once they come
The problem is that Norton IEG and Viruswall, among others, do not
detect inline attachments. Inline attachments are how files are sent
when creating a message using a web browser.
When using a web browser, the file gets sent to the IMail web server in a non-mail
format. But, the IMail web
Have a client who received this message, didn't send it?
From: Administrator [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
If your client is the person who "owns" the [EMAIL PROTECTED] E-mail address, and
they really didn't send that message, then it was probably a hacker. It sounds an
Hi Quentin
Imail is in C:\Imail, v 6.03
I expect the reason it is not creating imailsrv aliases automatically must
be because i created all the virtual hosts and users and aliases via the
command line utilities (importing a large number from another program)
Thank you for your response. I
I have configured iMail to use an external
database. In this database is the password field stored in clear text. Is there
a way to have this field encrypted somehow to plug a security
hole?
Anybody out there have any experience with the MAC and Mail and News 3.0?
I'm trying to talk a user through configuring their Mac. I had them change
the SMTP host and POP Host to 'corp.ourdomain.net' and the Account ID to
'[EMAIL PROTECTED]'. She does a send/receive, gets an error that the
pop
try this
account id: jane.doetheirdomain.com
pop host: corp.ourdomain.net
yes that is an ampersand... and yes, this is documented in a very obscure
place in I think the Imail user manual.. I had a hard time finding it but
thats the login that works for all mail clients... many will not allow
I figured out the problem with some help from my colleagues.
http://support.ipswitch.com/kb/IM-19980116-DD04.htm
-Original Message-
From: Scott Forsythe [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 18, 2000 10:23 AM
To: '[EMAIL PROTECTED]'
Subject: [IMail Forum] Mail and News 3.0 For
I've heard good things about using % as the delimiter.
Jonathan
At 10:22 AM 5/18/2000 -0400, you wrote:
Anybody out there have any experience with the MAC and Mail and News 3.0?
I'm trying to talk a user through configuring their Mac. I had them change
the SMTP host and POP Host to
I am running imail version 4.06 and am trying to set up multiple domain
names for one address.
If I 1 domain name in the ALIASES box on the domain properties page this
works fine. However, if I enter more than 1 domain name this prevents all
aliases from working (including the original alias )
I
A much better approach than encrypting the data
inside a database is to secure the database from unauthorized access. The
methods of doing this depend on the type of database you are using.
If you are using SQL Server or any other database
server, there should be ample facilities to set up
There is any way to change the extensions of the Imail program files from .html to
.asp?
I'm asking that because We have an ad rotator program (AdShark) and it run on .asp
pages Where could we modify, or change the lines where the .cgi programs call, for
example, the menu.html page?
Hi all,
I'm having some difficulties in configuring an Imail server for a client.
The set up at the client is as follows:
Leased line connection recently installed;
Gnat Firewall;
Imail server outside firewall with public IP;
Exchange server inside firewall (Private IP - 192)
NO internal
Does anyone have a good rules.ima filter for that Wscript.Kakworm virus?
Jonathan
You want it? We've got it!
http://home.paperwork.com
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
Hi
I am about to upgrade from Imail 5.06 to the current version 6 and as I am
doing this on a live server with over 20 domains and a few hundred email
addresses I was wondering if there is any particular issues to be aware of.
Will I have to restart my NT server after installation? Will the
Long term, what your asking is to be able to process .asp files with
Imail's httpd. This isn't going to happen, it would require Imail to hook
the ms asp preprocessor, which it won't do. In fact, as of ASP 2.0, no
non-MS httpd will do this. So, your answer, is no.
Jonathan
At 12:08 PM
At 05:25 PM 5/18/2000 +0100, you wrote:
Will I have to restart my NT server after installation?
Yup, most likely
Will the Imail
services be stopped during the upgrade?
Yup
Has anyone suffered any major disasters doing this?
Yup.
Advice:
Make sure EVERYTHING is closed when you do the
Not possible in the current versions of IMail. You could do this using a frames
system.
Grant Griffith
http://www.getafreewebsite.com
-- Original Message --
From: "Hector Laya" [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
Date: Thu, 18 May 2000
There is any way to change the extensions of the Imail program
files from .html to .asp?
I'm asking that because We have an ad rotator program (AdShark)
and it run on .asp pages Where could we modify, or change the
lines where the .cgi programs call, for example, the menu.html page?
We have just purchased annother ISP who happens to be using Imail. (not sure
of the version yet.)
The first obstical is to reproduce their users onto our system. I will be
creating a virtual domain on our current system. The users that we are
importing are from the primary domain on their mail
Yeah, but then how do you get the ad in the top frame to rotate whenever a
new page is sent on the bottom frame?
All of the hyperlinks generated by IMAILs Webmessenging will have the defaul
target of _self. Loading new pages in the lower frame will have no effect on
the upper frame.
I suppose
Hi,
in the Ipswitch's site there is an utility named IMU_UTIL
I think it's what you need
Alberto
- Original Message -
From: "Keith Lewis" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, May 18, 2000 7:20 PM
Subject: [IMail Forum] Moving a Domain from one company's server to
I am having a problem with mail getting stuck in the queue or at least
getting sent VERY slowly (like 5 a minute). This is a regular mailing that
we do and have never encountered this problem before. Has anyone run into
this, and if so how did you overcome it?
thanks
Brian
Please visit
You could do the script thing... or you could put a script in the ad frame
that timed out and reloaded itself... if you're rotator code is swift
enough, you might even change the timeout value depending on the ad... to
change the exposure time for each... but I'm getting ahead of myslef.
_M
Don't worry here is the link
http://www.martek.net/imu32.zip
Alberto
- Original Message -
From: "Keith Lewis" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, May 18, 2000 7:20 PM
Subject: [IMail Forum] Moving a Domain from one company's server to ours.
We have just purchased
Anyone using Emerald + Imail?
Carlos R. Díaz
Network Specialist
Centennial Data Services
www.centennialpr.net
787-767-8850
[EMAIL PROTECTED]
Centennial, tu Nueva Compañía de Teléfonos.
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
I've noticed my lightly used mail list (all 4) are taking almost 1.25 hours
to deliver (largest list is 25 members)
Below is the header of a email I sent at 1:04pm EST and just received at
2:15pm EST. I don't see anything in the Imail logs but then I'm not sure
what to look for.
Chris
Hi,
some time ago I posted a Mail Relay question to which I received replies
which I thought worked at first, but I did not test everything...
Even though a user has checked the "MAY SERVER REQUIRES AUTHENTICATION" on
his SMTP tab in the mail client, whenever tryiong to send, the following
I've noticed my lightly used mail list (all 4) are taking almost 1.25
hours to deliver (largest list is 25 members)
Below is the header of a email I sent at 1:04pm EST and just received
at 2:15pm EST. I don't see anything in the Imail logs but then I'm
not sure what to look for.
Maybe this question had been discussed here before. but anyway
How could I make that, depending on the domain that you have reached, load an
especific domain templates?
For example, I have www.domain1.com and www.domain2.com (both are "web mail sites"). I
also have diferents templates
Does anyone have any experience doing this?
I really want staff to be able to browse a list of all employees and mailing
lists via the web e-mail interface. If I could integrate something with
their personal address list that is available via the web, that would be
great.
Alternatively, does
- Original Message -
From: "Fravistat.com Support" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, May 17, 2000 8:18 PM
Subject: RE: [IMail Forum] OUTLOOK 2000 on Win2K crashes doing LDAP search
on IMAIL LDAP Server
Is the working Win2K on an Active Directory based domain?
Hi,
I just posted a message about a Mail Relay problem.
This is exactly what happens.
If I turn OFF Mail Relay (or at least leave it for known IP addresses), and if I dial
into the internet via some public portal (and get assigned another IP address):
1) If I set up my mail client with "My
We have just purchased annother ISP who happens to be using Imail. (not sure
of the version yet.)
The first obstical is to reproduce their users onto our system. I will be
creating a virtual domain on our current system. The users that we are
importing are from the primary domain on their mail
Re: having the top frame on a framed WebMessenging page reload itself
(presumably with a META REFRESH tag.
This is a big no-no. Most advertisers will forbid you to do this. If a
browser window gets buried on the screen or if the user walks away, the ad
server would be serving up ads that would
Basically you have 2 fairly easy options here, depending on the firewall:
1) With most firewalls you can forward certain port numbers to an internal
machine, it's usually referred to as "port mapping" or "internal mapping".
Most NAT devices support this, including Pipeline and SonicWall routers
On a mailing list I'm on, a user is using kmail to read messages. A user on
this list is posting from Web Messaging without putting CRLFs at the end of
each line. Kmail displays the paragraphs as one continuous line. Some people
think the sending program should adjust the lines so the reader gets
Ok. I have just been informed that they are using an Access database for
their mail server. I currently do not have access installed on our mail
server. How hard would it be to convert the access database to the imail
database?
I would love to have their machine but we did not buy out their
No real experience myself, but I have seen the Earthlink support sites
listing for MACs and other mail systems. It is open to the public and
should be helpful.
Kevin Childers
Mail Administrator
[EMAIL PROTECTED]
The Carolina's Fastest Internet Service Provider
www.NetQuick.net
(910)
Just a suggestion, can you set a timer on the ad banners? I've noted a
couple sites that have banners in frames that change after a fixed period of
time.
Kevin Childers
Mail Administrator
[EMAIL PROTECTED]
The Carolina's Fastest Internet Service Provider
www.NetQuick.net
(910) 486-7845 Ext. 23
Christina Oltmer
Worlds.com, Inc.
Work 914.698.3039
Cell 646.847.3449
[EMAIL PROTECTED]
Worlds.com, hmmm, I've heard of them
- Matt
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
-- Original Message --
I thought I read an RFC somewhere that it is the responsibility
of the client to handle word wrap so it adjusts to window size.
Is this true? If so what RFC is it?
RFC821 makes it sound as though it allows lines up to at least
Ok. I have just been informed that they are using an Access database for
their mail server. I currently do not have access installed on our mail
server. How hard would it be to convert the access database to the imail
database?
duck soup: export the Imail fields from Access to a text file, and
I haven't actually used the external database with IMail, but you don't need
to install Access on your server to use an Access database. (In fact, I
personally would not install any MS Office software on a server). You just
need an ODBC mapping.
Mike Perdue
WebMaster
The Grizzard Agency - An
Prior to having leased line, the client has been using their Exchange server
for internal mail only and using one of our in-house Imail servers via the
internet using a dial-up connection to another ISP.
I thought it would be appropriate to configure their new Imail machine to
store and forward
Need help getting a htm form to login with Imail:
They say it can be done.
Here is the code that I was provided.
The form works to a point, it takes me to the login.html but
I want to use the user's name and password to login right there.
Here is the Code:
form method="POST"
Hi All
We've inherited a new problem with our 2,000 free accounts to the local
sports league. We have recieved several complaints that users can not
log-in to web mail using the AOL browser. I'm at a loss on this one,
haven't touched AOL in 10 years or more. Any suggestions on a work
I've noticed my lightly used mail list (all 4) are taking almost 1.25
hours to deliver (largest list is 25 members)
Below is the header of a email I sent at 1:04pm EST and just received
at 2:15pm EST. I don't see anything in the Imail logs but then I'm
not sure what to look for.
Kevin,
I know we had some issues with AOL a while back. We found that about half
were just user related, and the other half were old versions of AOL. When
we had people upgrade to the newer version or install latest version of IE a
LOT of the problems disappeared.
-Original Message-
Kevin,
Try this:
American Online sends network requests from constantly changing IP
addresses.
RUN Web Messaging Manager. Enable "Ignore source address in security check"
option on the main
screen of the Web Messaging Manager. (in Imail 6.0 see Imail Administrator |
localhost instead)
Stop the
Len Conrad wrote:
Prior to having leased line, the client has been using their Exchange server
for internal mail only and using one of our in-house Imail servers via the
internet using a dial-up connection to another ISP.
I thought it would be appropriate to configure their new Imail
Is there a place that is a resource to find out how traffic over the NET is
moving, with trouble spots to explain those weird timing and slow
connections??
Mike Delp
Director of Technical Services
Database Computer Group, Inc.
(515) 564-0150
FAX- (515) 564-0152
[EMAIL PROTECTED]
-Original
Michael,
Thanks for your info. Just need to clarify a couple of things with you.
Let's presume the firewall does support internal mappings (I'm about 90%
sure it does - We didn't install it nor have experience of the firewall
being used)
With that presumption made, I simply set firewall
One issue you may run into if you use your Exchange Server to connect to
Outlook using the Exchange service as opposed to POP3 or SMTP is that you
will find that, by default, Exchange picks random port numbers to talk to
Outlook. Which means that, unless you keep your firewall wide open which
The GnatBox was terrific! BTW, it runs FreeBSD.
You can of course do everything the GNAT box can do for $ but do more on a
FreeBSD box for free. like more ethernet interfaces, T1 interfaces, etc, etc.
Australian Darren Reed's stateful "ip filter" and "ipnat" utilities on
FreeBSD are awesome
www.tracert.com has a script for doing traceroutes and
pings from differente serves. This is useful sometimes
in diagnosing if there is a bottleneck going to a
particular site.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of mike delp
Sent: Thursday, May
I, personally, use Red Hat Linux for my firewalls. Yeah...I know the
arguments about BSD versus Linux. But I don't leave my installation
default, and I put a minimum of stuff on the firewalls. IPChains is very
good for firewall rules, and alot more secure than the previous IPFWAdmin
We also use Linux box (Mandrake this time) with IPChains firewalling
techniques. I don't know much about linux personally but I do understand
TCP/IP packet routing etc and one of our linux guys had no problems
convincing me this was a good way to go after having read some white papers
on the
Is there anyway to get IMAIL to use a remote DRIVE (Mounted Network Drive) for storing
user directories. I setup everything inside of Imail Administrator and all the
mailboxes, etc.. show up on my mounted drive. (I mounted it as many different drive
letters.) When I go to the Webmail or IMap,
Run you mail services as something other than 'system'. The services need
access to the network locations. While using the admin utility, you are
probably logged in as 'administrator' which is able to use the mounted
drives.
-Original Message-
From: A.J. Ostman [EMAIL PROTECTED]
To:
Quentin,
How can IMAP resolve without having a static IP??.. it uses the client supplied
username [EMAIL PROTECTED] It strips off the dpzone.com and then grabs the AJO
and uses AJO as the username and dpzone.com as the database to reference.
Pop3 does the same.. It grabs the client supplied
The problem is that Norton IEG and Viruswall, among others, do not
detect inline attachments. Inline attachments are how files are sent
when creating a message using a web browser.
When using a web browser, the file gets sent to the IMail web server in a
non-mail format. But, the IMail
Sorry, what is Emerald?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Carlos Diaz
Sent: Thursday, May 18, 2000 1:02 PM
To: Imail (E-mail)
Subject: [IMail Forum] Emerald
Anyone using Emerald + Imail?
Carlos R. Díaz
Network Specialist
Centennial
Hi Scott,
Is there any developments on this?
Thanks,
Ogie.
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, May 18, 2000 03:36 AM
Subject: Re: [IMail Forum] An Anti-Virus idea (hooks)
http://support.ipswitch.com/kb/IM-2517-DM01.htm
IMail
We are using both but we have not yet migrated Imail to SQL (still using NT
SAM). We have a few billing issues that my partner is still working with IEA
on before we attempt to go further.
It will probably be a few months (July?) before I get the chance to move
Imail to SQL and then try and get
I haven't changed anything on my system...
And I haven't been reading the forum in the last few days...
but are any of you getting 2 messages for each post?
I am
Bob
Robert R. Brown
VP Operations
PK Communications, Inc.
3173 Chili Avenue
Suite 200
Rochester, NY 14624
1-716-889-7130 Main
75 matches
Mail list logo
