Account-Settings for outlook express
Username: [EMAIL PROTECTED]
Password: ***
POP 3 Server:
POP3: www.domain.de
SMTP: www.domain.de
Greetings Jan
Mit freundlichen Grüssen
Jan-Heeren Janssen
whydata Informationstechnologie Services
Bahnhofsplatz 5
37073 Goettingen
Tel.: 0551 - 49 56 433
I don't know about version 8 as I'm still on 7.13 myself but you can do this
with 7.13. Several of my customers write their own rules via the web
interface and they work fine.
David Daniels
System administrator
Starfish Internet Service
[EMAIL PROTECTED]
- Original Message -
From: John
All,
Am just curious if anyone has tried this, or if it is even possible to do
using Imail's built-in spam filtering...
I have been playing around with Boolean expressions in order to delete
certain types of spam that always share the same words and phrases in the
body of the e-mail. Rather than
Yes, i have it setup like that but it does not appear to be running
successfully and I get an error in the Log file as below
20030910 021307 127.0.0.1 SMTPD (CP) error 123 executing
h:\winnt\system32\cscript.exe j:\Filter.vbs
i:\IMail\spool\Q1833004502183f3c.SMD
That's an Invalid file name
Thank you! That was the ticket!
Looked and looked and could not find that anywhere in the doc's.
Chris
- Original Message -
From: Jan-Heeren Janssen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, September 10, 2003 1:45 AM
Subject: Re: [IMail Forum] POP3 Outlook Express
Anyone care to test this? send me a email and phone# and I'll add your IP
class C to the list.
Chris
[EMAIL PROTECTED]
At 05:27 PM 09/09/2003 -0400, you wrote:
I have 2589 entries or so since my file is 20,740 bytes big.
looking at the user's guide
Thanks Eric,
I spoke with a few people last night, and others were having problems with
Hotmail. I checked hotmail from my bellsouth.net account, sent 12 emails,
and only 4 went through till 8am this morning when I got the rest. Could
have been something with the network here in Florida. Who
short and to the point, yes, you can trap for those specific rbl's in
rules.ima.
I have a macro that takes my phrase list every night at midnight, inserts
correct punctuation makes a .rul file out of it so it can also be examined
in the subject. The downside to this is that your whitelists can
I spoke with a few people last night, and others were having problems with
Hotmail. I checked hotmail from my bellsouth.net account, sent 12 emails,
and only 4 went through till 8am this morning when I got the rest. Could
have been something with the network here in Florida. Who knows.
That's
Thanks alot Scott!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of R. Scott Perry
Sent: Wednesday, September 10, 2003 9:34 AM
To: [EMAIL PROTECTED]
Subject: RE: [IMail Forum] MX Connect Failure
I spoke with a few people last night, and others were
I did a google search and while found some answers nothing that said exactly
what causes this error or what it relates to.
I get it when I email a zip file from my imgate machine.
thanks
mark
To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html
List Archive:
Had this error since imail 6 when receiving email from our VSI-Fax software
on the web mail interface, outlook receives the email fine.
Now on 8.01 without an acceptable fix for the web mail.
Christopher A Checca
IT Department
Packard Transport, Inc.
24021 South Municipal Drive
Channahon, IL.
We have been running Imail now for about 8 months and so far have only one
issue we can't seem to solve.
We are looking for a way to remove specific attachments (.jpg, .gif) from
messages without deleting the entire message. I have been through
everything I can find and all I come up with is
Currently we strip all image attachments at the firewall and a notice is
added to the message that a file was stripped and why. We would like to
open this up so we can allow the attachments through the firewall and set
Imail to allow specific users only to receive the image attachments.
Is this
I'm not sure if IMAILS rules can handle this. I could be wrong. Just for
kicks, what type of firwall are you using that strips images from emails?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of J Craig
Sent: Wednesday, September 10, 2003 11:13 AM
To:
I have a company who would like to add annother domain and have it point mail to the
current domain that they use. problem is we use mail.domain.com for the alias for the
web interface. How do I setup the new domain to send email for the same user?
To Unsubscribe:
Version 7.07
We have a customer what can not send attachments via the web
interface from the office.
He, and we can from outside his office.
He is using a Net gear router.
Anyone have any suggestions as to why?
Thank you,
-Roger
On Wednesday, September 10, 2003, 11:43:14, [EMAIL PROTECTED] wrote:
I have a company who would like to add annother domain and have it
point mail to the current domain that they use. problem is we use
mail.domain.com for the alias for the web interface. How do I setup
the new domain to send
Security setting in the latest patches from MS can block attachment types
based on what MS think might be a malicious file type
Eric S
- Original Message -
From: Eric Carr [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, September 09, 2003 4:20 AM
Subject: [IMail Forum] Attachments
For #1 if you are looking just to populate multiple users/domains with a
single rules.ima you can get the IMFilter utility from the utilities page on
our website
For #2...You can specify the domain(s) and or specific mailboxes to apply
the immsgexp by using switches in the command line. From a
Just add the domains in the host alias box seperated by spaces don't forgot
to add two:
mail.yourdomain.com yourdomain.com
Also, don't forget your MX records.
To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html
List Archive:
Hi,
Does anyone here know how to configure Imail so that once my mailbox has
reached its maximum size, I can still receive emails?
Your help in this matter would be grately appreciated.
Kind Regards
Paul
The information in this electronic mail message is sender's business
Confidential and may
I ma a new user of IMail. I currently have 3 pops that we control. Next week
we are outsourcing pops for nationwide access. I currently have relay rules
for only ips on the 3 pops which we manage. The new pops are managed from
another ISP and i believe they are shared. I do not want to relay for
Does anyone here know how to configure Imail so that once my mailbox has
reached its maximum size, I can still receive emails?
If that were the case, you would not need a maximum size, so set the max
size to 0.
To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html
List Archive:
Is there a way of using pop before relay, or will I have to open up
for the ips assigned to pops and pray I do not become an open spam
relay?
Are the users unable to use SMTP AUTH? This is the preferred mechanism
for roaming relay.
-Sandy
Sanford
On Wednesday, September 10, 2003, 13:11:38, Vincent Jordan wrote:
I ma a new user of IMail. I currently have 3 pops that we control. Next week
we are outsourcing pops for nationwide access. I currently have relay rules
for only ips on the 3 pops which we manage. The new pops are managed from
Hello All,
IMail 8.01: I'm trying (unsuccessfully) to use Content Filtering White
List with domains.
For example, I've added 'ebay.com' (without quotes) to my list of White
List content filter domains, but e-mail from 'ebay.com' is still being
identified as spam by IMail's Content Phrase filter.
] Running a .vbs file with the SMTP Delivery
Application setting
Yes, i have it setup like that but it does not appear to be running
successfully and I get an error in the Log file as below
20030910 021307 127.0.0.1 SMTPD (CP) error 123 executing
h:\winnt\system32\cscript.exe j:\Filter.vbs
In the last two days I have had three users report that they cannot
delete messages using web-messaging... Two of those users seem to have
also lost some good e-mail when this initially happened. They claim
they were deleting some spam when there was a long time-out and then
were kicked out.
Hi all,
PLEASE HELP! One of my Imail lists will not deliver to its members.
Instead, it delivers the message to the list's owner (who isn't even a
list member) and nobody else. I have deleted and recreated the list
numerous times without luck. Other lists on this Imail 7.1 server work
just
No takers??
At 08:31 AM 09/10/2003 -0400, you wrote:
Anyone care to test this? send me a email and phone# and I'll add your IP
class C to the list.
Chris
[EMAIL PROTECTED]
At 05:27 PM 09/09/2003 -0400, you wrote:
I have 2589 entries or so since my file is 20,740 bytes big.
looking at the
As you did not include the actual X-IMAIL-SPAM info from the header or the
Spam Log entry, the info you have posted does not identify why your email is
being caught.
Be aware White List only works on content in the body of the email and not
with other types of Spam identification. For example, if
Does any one out there have any suggestions on a good defrag tool to use
(that will run as a service)? I think I could improve imail performance if
I could defrag these servers consistently a couple times a week.
Thanks
Tom
To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html
Uh, Nevermind!
I just discovered that the list was setup for Moderator-only posting and
the sender was incorrect.
I presume that this behavior is designed to allow a list owner to
moderate messages meant for list delivery from untrusted parties. What
might be helpful is something to clarify
Diskeeper 7
If it's bad you probably will notice improvement.
Tyler
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Imail Tom
Sent: Wednesday, September 10, 2003 3:38 PM
To: [EMAIL PROTECTED]
Subject: [IMail Forum] defragging imail
Does any one
Here are two:
http://www.diskeeper.com
http://www.raxco.com
There are undoubtedly others.
Mike
Imail Tom wrote:
Does any one out there have any suggestions on a good defrag tool to use
(that will run as a service)? I think I could improve imail performance if
I could defrag these servers
I've been using Diskkeeper set it and forget it for about 6 months. It
probably runs ever two hours or so and it never seems to get over slightly
fragmented. It doesn't seem to impact performance while running and the
server has been running more smoothly since the install.
Marc
-Original
Try Defrag Manager. Works very well for us!
http://www.winternals.com/es/solutions/DefragManager.asp
Regards,
Mark Schaefer
Sr. Technical Analyst
Edwards Lifesciences LLC
949 250 3557 Phone
949-809-7354 FAX
949-203-9050 Pager
[EMAIL PROTECTED]
Hello
I am upgrading from a server running 6.02 Imail to
a new server that will be running 8.02. Both versions are the
unlimited. I can't get my users to migrate from one to the other.
Does anyone know of the best way to proceed with this type of
upgrade.
Thanks in advance,
Bill
I use this batch file on Sundays @ 4:00am
cls
net stop IMail Queue Manager Service
net stop IMail POP3 Server
net stop IMail SMTP Server
net stop IMail Web Service
net stop Imail Web Calendar Service
c:\tools\contig.exe c:\imail\* -v -s
net start IMail POP3 Server
net start IMail SMTP Server
net
http://www.microsoft.com/technet/treeview/?url=/technet/security/bulletin/MS03-039.asp
Apologies if this has been sent already.
To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html
List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/
Knowledge Base/FAQ:
Ya... we sent it to Microsoft in May. :o)
The way that Microsoft patched the new RPC Part II vulnerability actually
breaks most scanning tools looking for the first flaw.
That is to say that if your company is using a scanning tool looking for
MS03-026 and you have installed MS03-039 then your
Funny, as I work with Eeye alot and I did not hear that techsanctuary had
anything to do with the discovery according to Microsoft. Congrats on your
discovery!
There is a new Microsoft scanning tool to replace the old one that actually
scans for both patches at the same time and is lighting
P.S. William. I did not read your signature to see you actually work for
Eeye! Great job!
Regards,
Mark Schaefer
Sr. Technical Analyst
Edwards Lifesciences LLC
949 250 3557 Phone
949-809-7354 FAX
949-203-9050 Pager
[EMAIL PROTECTED]
I'm thinking about using IMail as my IMAP4 server. My email comes in to a
POP3 account at my ISP, and I want IMail to periodically (every few
minutes) connect to my ISP's POP3 server and download the email that's
there, and put it into my IMAP4 inbox in IMail. My previous IMAP4 server
did
Great bunch of guys here ay eEye.
I rent the techsanctuary.org mailbox from friends.
The ISP where my techsanctuary is hosted also participates in this forum (Hi
Dave!). Perhaps we could convince him to upgrade from IMail 7.07. ;o)
William
- Original Message -
From: [EMAIL
On Sep 10, 2003, at 6:01 PM, William Lefkovics wrote:
Retina 4.9.126 and our free RPC scanner Version 1.1.0 have the correct
checks that the rest of the scanners are going to need to model
themselves
after in order to accurately detect these RPC flaws. Again the free RPC
scanner tool, with
I would personally recommend *avoiding* OO defrag. They are based in
Germany, so getting support is nearly impossible. I could never get
their product to defrag one of our web servers, whereas Diskeeper would
work with no problems.
-Original Message-
From: Imail Tom [mailto:[EMAIL
I have used SUS for a bit now, and it works well. I would be willing to
exchange dialog with you if you need.
Regards,
Mark Schaefer
Sr. Technical Analyst
Edwards Lifesciences LLC
949 250 3557 Phone
949-809-7354 FAX
949-203-9050 Pager
[EMAIL PROTECTED]
As a follow up I have the 550 problem fixed.
After a lot more testing I found this problem was only happening on sites
where the mail.?.com and www.?.com were hosted on different IP's. One of
the sites I tested on had just the right mix to make it clear to me because
they had one IP for each
I have had a few similar problems with mailboxes. Usually there is a .tmp file that
is locked by a process in that users directory. It is a text file that appear to be
something left over from attachments. The file name usually is UT~ and the username
.tmp and the text is the name of an
Since Microsoft indicated that Win98 was not vulnerable to the RPC/DCOM
issue, we did not rush to make that change, but the free scanner did go
through some versioning and that audit was fixed in 1.0.4. We did fix how
Win98 was reported.
With the announcement today, we released an updated free
I have verified the couple of users who say they cannot delete
messages. When they try there is a 10-second delay (at which time
server cpu utilization maxes at 100%) and the message is not
deleted. It also takes 10 seconds to change between mailboxes (also
100% cpu at that
Hey Tom,
Here's what runs every night on our imail email server:
I use the scheduled task (windows scheduler) that fires 3 events.
1) 1st it runs the F-Prot for dos virus update via virupdate.bat and a file
called script.txt. The virupdate.bat file simply runs the built in ftp
process and
As a follow up I have the 550 problem fixed.
After a lot more testing I found this problem was only happening on sites
where the mail.?.com and www.?.com were hosted on different IP's.
Yup. Just as I said, IMail was going to the A record rather than the MX
record. Since most sites have
What was your previous IMAP4 server out of curiousity?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Joe Martinez
Sent: Wednesday, September 10, 2003 6:40 PM
To: [EMAIL PROTECTED]
Subject: [IMail Forum] Retrieve messages from external POP3 server?
I'm
Diskeeper and Raxco are the two worthy of looking at
Raxco seems to do a better job defragmenting, although I will tell you I
have not evaluated the new Diskeeper 8 that was released last week.
Diskeeper does have a smart scheduling feature that works only as often as
necessary, which Raxco does
No, IMail will not retrieve email using POP3. What you need is
something like Fetchmail on Unix. I use Fetchmail to periodically
retrieve my other accounts and and send them to my IMail account. There
should be Windows versions available, search the archives and Google.
Gerry.
Joe Martinez
Rick Leske wrote:
Hey Tom,
Here's what runs every night on our imail email server:
I use the scheduled task (windows scheduler) that fires 3 events.
1) 1st it runs the F-Prot for dos virus update via virupdate.bat and a file
called script.txt. The virupdate.bat file simply runs the built in
Rick Leske wrote:
Hey Tom,
Here's what runs every night on our imail email server:
I use the scheduled task (windows scheduler) that fires 3 events.
1) 1st it runs the F-Prot for dos virus update via virupdate.bat and a file
called script.txt. The virupdate.bat file simply runs the built in
Using Mozilla/Win2k, the attachment shows.
Using IE 5.5, the attachment shows.
Opera 6.5 however does not display the attachment fields and buttons!
This was using a .doc attachment.
E. Shanbrom (Ipswitch) wrote:
Security setting in the latest patches from MS can block attachment types
based on
I downloaded the files that you mentioned, Could you please explain a
few things to me first?
To begin with? The .txt file. It has an e-mail address in it? How is
this going to? And what is it for?
Also, what is the virupdate.bat file for? What does it do?
Basically, what I am asking. Is what
Gerry Massat wrote:
Using Mozilla/Win2k, the attachment shows.
Using IE 5.5, the attachment shows.
Opera 6.5 however does not display the attachment fields and buttons!
This was using a .doc attachment.
E. Shanbrom (Ipswitch) wrote:
Security setting in the latest patches from MS can block
Rick Wrote:
Now the autodefrag.exe is pretty kewl. It actually fires w2k's 'built-in'
defragger. Yes I know it's not the best in the world, but it's better than
nothing. Our email server is running multiple services, ie: perl, asp
pages, apps, etc. and we haven't had any issues yet. If you
Oh.. re-read your 9-4 post where you said .doc worked, but .jpg and
others didn't. Sent myself an email with a jpg, verified with Mozilla
and IE, and it still works for me!
Your attachments were under the 2mb limit for WebMail?
Gerry Massat wrote:
Gerry Massat wrote:
Using Mozilla/Win2k,
65 matches
Mail list logo
