There's no point acting all surprised about it!!
All the planning charts and demolition orders have been on display in your
local planning department in Alpha Centauri for fifty of your Earth years,
so you've had plenty of time to lodge any formal complaint and it's far too
late to start making
I'm patching all our w2k servers tonight. It seems that all the problems
reported only affects w2k sp2 - if you are running sp3 it should be safe to
run the patch. Patched two minor servers yesterday without problems.
Regards
/Rasmus
-Original Message-
From: Sharyn Schmidt
PROTECTED]
Sent: 25. marts 2003 14:32
To: [EMAIL PROTECTED]
Subject: Re: [IMail Forum] [OT] urgent notification: MS03-007 UPDATE
You need to reread the bulletin information. It is for SP2
*and* SP3, and
the patch will be included with SP4.
Tom
- Original Message -
From: Rasmus
Hi all,
Anybody got a link to a good reliable disk benchmark program. I'm currently
trying to find out why it takes three times the time to zip logfiles on our
Imail server than on a webserver with the same cpu/mem. The only real
difference between the two machines is that the mailserver discs is
Adaptec 2100S raid controller.
/Rasmus
-Original Message-
From: Len Conrad [mailto:[EMAIL PROTECTED]
Sent: 17. marts 2003 14:56
To: [EMAIL PROTECTED]
Subject: Re: [IMail Forum] OT: Disk performance measurement
Anybody got a link to a good reliable disk benchmark
program.
As far as I know, the only possible solution is to install a 3rd party
syslog program and the make Imail log to it. Take a look at
http://www.kiwisyslog.com/ - great and free :-) It also gives you the option
to split SMTP, SMTPD, POP3 and IMAP traffic to different logfiles.
If you are moving the
Time to take your box offline and do a complete rebuild, since you have most
likely been compromised. The XScan util is a vulnerability scanner but the
fact that it keeps reappearing shows that somebody probably got full access
to your server - and thus your complete network.
Good luck!
/Rasmus
I assume you are looking for this:
http://www.dnsstuff.com/tools/ip4r.ch?ip=213.131.67.41
/Rasmus
-Original Message-
From: Magdy [mailto:[EMAIL PROTECTED]]
Sent: 7. januar 2003 10:51
To: [EMAIL PROTECTED]
Subject: [IMail Forum] lists of spammer servers
hi all,
I am looking
Sounds good. Were you using 127.0.0.1 as the IP, just out of
curiosity?
Yep, log server is set to 127.0.0.1
I've been reviewing the logfile from yesterday (direct file logging), and it
looks good! So it seems the problem is with syslog. I'll try Kiwi next to
verify that it's not a
today after the mailserver has sent our daily
newsletter.
/Rasmus
-Original Message-
From: Sanford Whiteman [mailto:[EMAIL PROTECTED]]
Sent: 17. december 2002 20:04
To: Rasmus Aaen
Subject: Re: [IMail Forum] Imail not logging when under heavy load
As I'm quite worried by this, i
Hi,
About two weeks ago I found out that the log file of our Imail server (6.06
on WinNT Sp6) became inconststent when under heavy load
(http://www.mail-archive.com/imail_forum@list.ipswitch.com/msg61413.html).
After a bit more research, I am now quite sure of this. Today I sent an
email through
Hi all,
Using Imail 6.06 on Win NT4 sp6a and declude virus pro 1.61. SMTP logs to
the log server.
Normally the load on our mailserver is quite light - about 5000 mails per
day. Yesterday I was playing around with the server, trying to get Declude
Queue to kick in. I wrote a small script which
The smtp implementation on the PIX is broken. See
http://support.ipswitch.com/kb/IM-2707-DM02.htm
/Rasmus
-Original Message-
From: Mark Tombaugh [mailto:mtombaugh;alliedcc.com]
Sent: 5. november 2002 16:40
To: [EMAIL PROTECTED]
Subject: [IMail Forum] Server Welcom Message
Hi,
I know this has been discussed before, but I can't find it in the
knowledgebase or the mailinglist archive so here goes: How do I stop Imail
from creating subfolders in a mailbox if somebody send a mail to eg.
[EMAIL PROTECTED]? I just found out that one of my mailboxes has
been hit heavily
Unknown user: [EMAIL PROTECTED]
It's just what it says: mx.adelphiacom.com doesn't accept mail to
[EMAIL PROTECTED] Not your problem.
220 mx.adelphiacom.com ESMTP Sendmail 8.11.1/8.11.0; Tue, 13 Aug 2002
10:28:07 -0400 (EDT)
HELO gw.back-bone.dk
250 mx.adelphiacom.com Hello gw.back-bone.dk
Hi all.
I need to set Imail up to store and forward email for our domain. I've done
this on a few of the costomers we are hosting email for, so no o problems so
far - well documented procedure.
Now I need to do this setup for our own domain (back-bone.dk), so mail will
go directly to our
Use Declude for virus too ;-) It can send an email back to the sender.
/Rasmus
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Steven Driscoll
Sent: 19. april 2002 12:52
To: [EMAIL PROTECTED]
Subject: [IMail Forum] Virus Stuff!
Good Morning all
You should use Declude Queue - http://www.declude.com/dq.htm
/Rasmus
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Adil Can
Sent: 22. marts 2002 11:24
To: [EMAIL PROTECTED]
Subject: [IMail Forum] Mail Stack in Spool
We are using a tool developed
Ip: 61.96.0.0
Subnet:255.240.0.0
/Rasmus
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Dan Star
Sent: 21. marts 2002 16:15
To: iMail List
Subject: [IMail Forum] How would this IP address range?
Hi,
What net mask would I use to block 61.96.0.0 -
-
From: Rasmus Aaen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, March 21, 2002 9:28 AM
Subject: RE: [IMail Forum] How would this IP address range?
Ip: 61.96.0.0
Subnet:255.240.0.0
/Rasmus
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf
Anybody else getting these? The subject is Internet Security Update and
it looks legitimate. If not watch out and DO NOT click on the attached
.exe!
It's the Gibe virus. See
http://www.sophos.com/virusinfo/analyses/w32gibea.html
/Rasmus
---
[Denne E-mail blev scannet for virus af
Hopefully, now that this is becoming a bigger and bigger issue, Ipswitch
will take care of this issue.
Who do we need to hammer on to get this fixed?
I spare one for me - though we are still running 6.06 so Ipswitch will
probably just tell us to upgrade to 7.x. That should keep me busy until
Wow. People on this list have been screaming and begging for the API to
Imail for over two years! Now they are telling us that it does exist, they
just decided to keep it secret.
Come on Ipswitch. How about telling your users a little about what this can
do and what you are asking for the
Hi,
I just noticed that I have a few hundred .sm$ files in the spool dir from
the last few days. Does anybody know what these files are. They are not
mentioned in http://support.ipswitch.com/kb/IM-19981110-DD08.htm
Thanks
/Rasmus
---
[Denne E-mail blev scannet for virus af Declude Virus]
Randy,
what wersion of Imail are you running? I can't get this to work on 6.06.
When I check Account Access Disabled, I can't login with webmail either.
/Rasmus
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Randy Armbrecht
Sent: 22. januar 2002
FAQ.
See http://support.ipswitch.com/kb/IM-19980116-JB11.htm
/Rasmus
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Adam Grayson
Sent: 21. januar 2002 09:51
To: [EMAIL PROTECTED]
Subject: [IMail Forum] Transferring IMail Files
We are moving out
Hi all,
One of my users told me that he couldn't get his mail using POP3. His client
connects to our mailserver, and it gets as far as to telling him how many
messages there is in the inbox. Then he gets an error saying something like
connection to server lost. In our logfile I see this:
You need SMTP AUTH enabled. If not, your users can't authenticate to your
server. Has nothing to do with the open relay though. The settings you
mention should result in a closed relay, unless you put the abuse.net IP in
there :-)
/Rasmus
-Original Message-
From: [EMAIL PROTECTED]
PROTECTED]]Im Auftrag von Rasmus Aaen
Gesendet: Mittwoch, 3. Oktober 2001 10:00
An: '[EMAIL PROTECTED]'
Betreff: RE: [IMail Forum] Open Relay (was f_Prot)
You need SMTP AUTH enabled. If not, your users can't authenticate to your
server. Has nothing to do with the open relay though. The settings
accounts does it occur
randomly in the 2nd through 5th account. Example: 1st acct ok, 2nd fails,
3rd ok, 4th ok, 5th fails.
I am going to upgrade to soon to 7.03 in hopes that it will correct the
issue.
Mike
- Original Message -
From: Rasmus Aaen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent
Hi,
I was looking through our Imail log today when I noticed this error:
08:29 12:07 SMTPD(B59B024E) net read error 10038
This error appears about 1500 times in the logfile today and the same
yesterday. I can't find anything in the KB other than An operation was
attempted on something that is
You can't do that because Imail uses a proprietary webserver, and there is
no API to Imail. If you really want this, you have to write your own web
interface using a third party app. like EasyMail Objects. But then you can't
use the admin stuff included in Imail.
/Rasmus
-Original
We use regedit.exe to produce a backup of the registry. The command is
scheduled to run 10 min. before a tape-backup of the c:\imail folder.
regedit.exe /e c:\Imail\imailbak.reg
HKEY_LOCAL_MACHINE\Software\Ipswitch
/Rasmus
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
because the mailserver was failing. But it didn't send no where near the
34,000 mails (I think it send about 6-700 during the night).
Does anybody have an idea about what went wrong..
Regards,
Rasmus Aaen
--
Backbone Digital Systems
Ryesgade
They were (almost) all from the monitor program, but the logs doesn't show
the monitor machine sending them. Could it be because Imail tries to create
a new .SMD file, if it can't write to the one on the disk?
/Rasmus
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
Hi Darren.
Great bit of programming there! But I think it has a bug somewhere. I ran it
on our logfile from yesterday, and it came up with one account having send
450+ mails. When I checked the logfile manually, the account was only
mentioned 10 times, and 4 of them was receiving mails.
If you
emails with .jpg files attached just
turned up in my virusbox folder.
What am I doing wrong?
Thanks
Rasmus Aaen
smime.p7s
When files are converted for mailing, they can easily contain
punctuation +
your target extension. The combination of the period, which is an
infinite
wild card, and the punctuation escape is what is really killing
you. Change your rules like this:
B~\filename_=".*\._exe:virusbox
. If the account he is
forwarding to is on the same Imail server, the email will reach the
user.
Is this because of the order Imail processec messages? Is user forwards
processed before host rules?
We are using Imail 6.05a
Thanks
Rasmus Aaen
smime.p7s
.
Is this because of the order Imail processec messages? Is user forwards
processed before host rules?
Thanks
Rasmus Aaen
smime.p7s
. If the account he is forwarding to is on the same Imail server, the
email will reach the user.
Is this because of the order Imail processec messages? Is user forwards processed
before host rules?
We are using Imail 6.05a
Thanks
Rasmus Aaen
Please visit http://www.ipswitch.com/support/mailing
Does anybody know if it's possible to add comments to the rules.ima file?
I found this in the list archive:
As for REM in Rules, not sure about ever seeing this, but often '#'
is used and it would not suprise me at all if IMail conforms to
this standard.
Daniel Donnelly
Can anybody
Running Imail 6.03 on a NT 4.0 sp5.
A few days ago, the IWebMsg.exe started crashing several times a day with a
"The instruction at "0x00421b8f" referenced memory at.. Press OK to
terminate the application". When I looked into it today, I found that it
happened every time I clicked on a HTML
I think the only way to do this, is to extract a list of all your users and
then make a script that sends a mail to each user.
/Rasmus
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Khaled Ashraf
Sent: 20. december 1999 10:12
To: [EMAIL PROTECTED]
As long as all the fields contain valid values, it shouldn't give you any
problems.
We are doing this for our free email service.
/
Rasmus
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of sg
Sent: 1. december 1999 17:23
To: [EMAIL PROTECTED]
Subject:
FishingLife.com
- Original Message -
From: Rasmus Aaen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, December 01, 1999 11:35 AM
Subject: RE: [IMail Forum] User Database
As long as all the fields contain valid values, it shouldn't give you any
problems.
We are doing this for our
This checkbox doesn't just disable POP3 access, it also disables IMAP4 (and
probably SMTP too)
This needs to be corrected in the next version...
Rasmus Aaen
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of John Carter
Sent: 2. november 1999 22:38
It will refuse logins. I think that would be the way to test it.
Rasmus
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Hesham Gowaily
Sent: 28. oktober 1999 16:19
To: [EMAIL PROTECTED]
Subject: Re: [IMail Forum] MS SQL 6.5 or 7.0 ODBC dll wanted...
Hi.
I use imail1.exe to send mail from a script, but I can't get it to send a
friendly name along with the email address in the from field. I have tried
different combinations like -u "Rasmus [EMAIL PROTECTED]", -u "'Rasmus
[EMAIL PROTECTED]" and so on.
Anybody who know how I can accomplish
Raghav,
You can't create a user with the Easymail objects, or with the IMAP4
protocol.
I suggest you use a cgi script and the adduser.exe utillity from Imail.
Rasmus
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Raghav Sabella
Sent: 26. oktober 1999
That would be:
ftp://ftp.lansystems.co.uk/pub/BindNT/BindNT-822bin.zip
Rasmus
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of David Gregg
Sent: 25. oktober 1999 14:51
To: [EMAIL PROTECTED]
Subject: Re: [IMail Forum] BIND 8.2.2 Binary for NT: anybody
Hi.
Is it possible to disable POP3 access to an account, but still allow IMAP4
access?
Thanks.
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
Hi all
I have set a MaxMsgSize of 300 on some of my mailboxes. The problem is
that if I send a message that is too big, it doesn't bounce. It just
disappers. Anyone know what the problem is?
Rasmus Aaen
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from
I'm
almost done implementing a system like hotmail using Imail, Easymail and
MS-SQL7.
Except
from a few initial problems with the IMAP object whitch Quiksoft solved with a
new dll, everything works like a charm. The system has a fully customized danish
interface and the same
54 matches
Mail list logo
