Re: [j-nsp] Measure transit traffic to specific destination

If you don't wanna pay then make use of a free collector (aka opensource) i.e. http://www.ntop.org/ (i have had and used this +1) Or more here: https://www.pcwdld.com/free-open-source-netflow-analyzers On Sat, Dec 31, 2016 at 2:41 AM, Matthew Crocker wrote: > > I’m

Re: [j-nsp] Measure transit traffic to specific destination

I’m sending IPFIX flows to Scrutinizer and can generate the type of reports you are looking for. ‘All bandwidth from X ASN’, ect https://www.plixer.com/products/scrutinizer/ On 12/30/16, 2:16 AM, "juniper-nsp on behalf of Santanu Mandal"

Re: [j-nsp] Measure transit traffic to specific destination

Hello. IMO the easiest way to do this is setting up a firewall filter for this destination with counter action and fetching the counter values using SNMP. You can use a graphing tool of your choice for this. I have found these two posts that should lead you to a working setup.

[j-nsp] Measure transit traffic to specific destination

Dear all, I want to measure traffic bandwidth consuming for a specific destination IP from My Orzanization. Say how much is bandwidth is consumed for destination x.x.x.x out of total bandwidth in my ISP link. I have configured S-flow, but there I can see total amount of traffic transfered over a