On Wed, Mar 24, 2021 at 7:26 PM Claudius Heine wrote:
>
> Hi Jagan,
>
> On 2021-02-14 18:44, Jagan Teki wrote:
> > SN65DSI83/84/85 devices are MIPI DSI to LVDS based bridge
> > controller IC's from Texas Instruments.
> >
> > SN65DSI83 - Single Channel DSI to S
Hi Laurent,
On Wed, Mar 24, 2021 at 3:09 PM Laurent Pinchart
wrote:
>
> Hi Jagan,
>
> On Wed, Mar 24, 2021 at 02:44:57PM +0530, Jagan Teki wrote:
> > On Wed, Mar 24, 2021 at 8:18 AM Samuel Holland wrote:
> > > On 3/23/21 5:53 PM, Laurent Pinchart wrote:
> > >
On Wed, Mar 24, 2021 at 8:18 AM Samuel Holland wrote:
>
> On 3/23/21 5:53 PM, Laurent Pinchart wrote:
> > Hi Jagan,
> >
> > Thank you for the patch.
> >
> > On Mon, Mar 22, 2021 at 07:31:49PM +0530, Jagan Teki wrote:
> >> Replace of_drm_find_panel with
DRM bridge drivers have build-in handling of treating all display
pipeline components as bridges.
So, convert the existing to a drm bridge driver with a built-in
encoder support for compatibility with existing component drivers.
Signed-off-by: Jagan Teki
---
Changes for v4:
- none
Changes
for bridge enable gpio pin
- PB7 gpio for lcd enable gpio pin
- PL4 gpio for backlight enable pin
Signed-off-by: Jagan Teki
---
Changes for v4:
- replace reset with enable-gpios
Changes for v3:
- none
arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts | 85
1 file changed, 85
for bridge functionalities in Allwinner DSI
controller.
Cc: Samuel Holland
Signed-off-by: Jagan Teki
---
Note:
Samuel Holland, The existing kms hotplug dropped in order to
attach the bridge properly.
However, I did try several ways to support hotplug with the
bridge but it's resulting in a deadlock
Replace of_drm_find_panel with drm_of_find_panel_or_bridge
for finding panel, this indeed help to find the bridge if
bridge support added.
Added NULL in bridge argument, same will replace with bridge
parameter once bridge supported.
Signed-off-by: Jagan Teki
---
Changes for v4, v3:
- none
on this would be appreciated!
Jagan.
Jagan Teki (4):
drm: sun4i: dsi: Use drm_of_find_panel_or_bridge
drm: sun4i: dsi: Add bridge support
drm: sun4i: dsi: Convert to bridge driver
[DO NOT MERGE] ARM: dts: sun8i: bananapi-m2m: Enable S070WV20-CT16 panel
arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and
produce RGB565, RGB666, RGB888 output format.
Add bridge driver for it.
Signed-off-by: Jagan Teki
Reviewed-by: Robert Foss
---
Changes for v5:
- rebase drm-misc-next
ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and
produces RGB565, RGB666, RGB888 output format.
Add dt-bingings for it.
Signed-off-by: Jagan Teki
Reviewed-by: Robert Foss
Reviewed-by: Rob Herring
---
Changes for v5
ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and
produce RGB565, RGB666, RGB888 output format.
Add bridge driver for it.
Signed-off-by: Jagan Teki
---
Changes for v4:
- added regulators
- replace reset with EN
- fixed
ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and
produces RGB565, RGB666, RGB888 output format.
Add dt-bingings for it.
Signed-off-by: Jagan Teki
---
Changes for v4:
- fixed Laurent comments
- added regulators
- replace
Hi Laurent,
On Thu, Mar 4, 2021 at 4:29 AM Laurent Pinchart
wrote:
>
> Hi Jagan,
>
> On Wed, Mar 03, 2021 at 08:08:35PM +0530, Jagan Teki wrote:
> > On Wed, Feb 24, 2021 at 6:44 PM Laurent Pinchart wrote:
> > > On Wed, Feb 24, 2021 at 06:07:43PM +0530, Jagan Teki wr
On Wed, Feb 24, 2021 at 6:44 PM Laurent Pinchart
wrote:
>
> Hi Jagan,
>
> On Wed, Feb 24, 2021 at 06:07:43PM +0530, Jagan Teki wrote:
> > On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart wrote:
> > > On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> &g
On Tue, Mar 2, 2021 at 10:05 PM Maxime Ripard wrote:
>
> On Fri, Feb 26, 2021 at 10:40:24PM +0530, Jagan Teki wrote:
> > On Fri, Feb 26, 2021 at 10:27 PM Maxime Ripard wrote:
> > >
> > > Hi,
> > >
> > > On Mon, Feb 15, 2021 at 01:11:01AM +0530
STM ltdc driver uses an empty implementation for its encoder.
Replace the code with the generic simple encoder.
Signed-off-by: Jagan Teki
---
drivers/gpu/drm/stm/ltdc.c | 12 ++--
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm
32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
i.Core STM32MP1 needs to mount on top of this Evaluation board for
creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
Add support for it.
Signed-off-by: Jagan Teki
---
Changes for v3:
- none
arch/arm/boot/dts/Makefile
of this Carrier board for
creating complete i.Core STM32MP1 C.TOUCH 2.0 board.
Add support for it.
Signed-off-by: Jagan Teki
---
Changes for v3:
- none
arch/arm/boot/dts/Makefile| 1 +
.../stm32mp157a-icore-stm32mp1-ctouch2.dts| 47 +++
2 files changed, 48
for it.
Signed-off-by: Jagan Teki
---
Changes for v3:
- none
Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
b/Documentation/devicetree/bindings/arm/stm32/stm32
complete platform solutions.
Add support for it.
Signed-off-by: Jagan Teki
---
Changes for v3:
- add device_type
.../boot/dts/stm32mp157a-icore-stm32mp1.dtsi | 196 ++
1 file changed, 196 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi
diff
needs to mount on top of MicroDev 2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
7" Open Frame Solution board.
Add support for it.
Signed-off-by: Matteo Lisi
Signed-off-by: Francesco Utel
Signed-off-by: Mirko Ardinghi
Signed-off-by: Jagan Teki
---
for it.
Signed-off-by: Jagan Teki
---
Changes for v3:
- none
Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 6 ++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index 255d3ba50c63
bindings for it.
Signed-off-by: Jagan Teki
---
Changes for v3:
- updated commit message
Changes for v2:
- none
Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 7 +++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
b/Documentation
Lisi
Signed-off-by: Francesco Utel
Signed-off-by: Mirko Ardinghi
Signed-off-by: Jagan Teki
---
Changes for v3:
- add device_type
- updated commit message
Changes for v2:
- none
.../dts/stm32mp157a-microgea-stm32mp1.dtsi| 148 ++
1 file changed, 148 insertions(+)
create mode
Micro SoM.
MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.
Add support for it.
Signed-off-by: Matteo Lisi
Signed-off-by: Francesco Utel
Signed-off-by: Mirko Ardinghi
Signed-off-by: Jagan Teki
---
Changes for v3
h
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
7" Open Frame Solution board.
Add bindings for it.
Acked-by: Rob Herring
Signed-off-by: Jagan Teki
---
Changes for v3:
- updated commit message
Changes for v2:
- collect a-b
Documentation/devicetree/bindings/arm/stm32/stm32.y
This is the initial series to support Engicam MicroGEA STM32MP1 and
i.Core STM32MP1 SoM and it's associated carrier board dts(i) support.
Changes for v3:
- fixed v2 comments
- updated commit messages
Changes for v2:
- fixed v1 comments
- add i.Core STM32MP1 SoM
Any inputs?
Jagan.
Jagan Teki
On Fri, Feb 26, 2021 at 10:27 PM Maxime Ripard wrote:
>
> Hi,
>
> On Mon, Feb 15, 2021 at 01:11:01AM +0530, Jagan Teki wrote:
> > Use drm_panel_bridge to replace manual panel handling code.
> >
> > This simplifies the driver to allows all components in the
>
Hi Alexandre,
On Fri, Feb 26, 2021 at 9:42 PM Alexandre TORGUE
wrote:
>
> Hi Jagan
>
> On 2/26/21 8:02 AM, Jagan Teki wrote:
> > MicroGEA STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
> >
> > General features:
> > - STM32MP157AAC
> > -
On Fri, Feb 26, 2021 at 8:39 PM Alexandre TORGUE
wrote:
>
> Hi Jagan
>
> On 2/24/21 7:05 PM, Jagan Teki wrote:
> > On Mon, Jan 25, 2021 at 8:35 PM Alexandre TORGUE
> > wrote:
> >>
> >> Hi,
> >>
> >> On 12/23/20 8:13 PM, Jag
On Tue, Feb 16, 2021 at 11:31 AM Axel Lin wrote:
>
> The voltages in pf8x00_sw7_voltages are in ascendant order, so use
> regulator_map_voltage_ascend.
>
> Signed-off-by: Axel Lin
> ---
Reviewed-by: Jagan Teki
32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
i.Core STM32MP1 needs to mount on top of this Evaluation board for
creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
Add support for it.
Signed-off-by: Jagan Teki
---
Changes for v2:
- new patch
arch/arm/boot/dts/Makefile
for it.
Signed-off-by: Jagan Teki
---
Changes for v2:
- new patch
Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 6 ++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index
on STM32MP157A from Engicam.
MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.
Add support for it.
Signed-off-by: Matteo Lisi
Signed-off-by: Francesco Utel
Signed-off-by: Mirko Ardinghi
Signed-off-by: Jagan Teki
2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
7" Open Frame Solution board.
Add bindings for it.
Acked-by: Rob Herring
Signed-off-by: Jagan Teki
---
Changes for v2:
- collect a-b
Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 4 +++-
1 file c
for it.
Signed-off-by: Jagan Teki
---
Changes for v2:
- new patch
Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
b/Documentation/devicetree/bindings/arm/stm32
aces.
MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
7" Open Frame Solution board.
Add support for it.
Signed-off-by: Matteo Lisi
Signed-off-by: Francesco Utel
Signed-off-by: Mirko Ardinghi
Signed-off-by
board.
Add bindings for it.
Signed-off-by: Jagan Teki
---
Changes for v2:
- none
Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 7 +++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
b/Documentation/devicetree/bindings/arm
of this Carrier board for
creating complete i.Core STM32MP1 C.TOUCH 2.0 board.
Add support for it.
Signed-off-by: Jagan Teki
---
Changes for v2:
- new patch
arch/arm/boot/dts/Makefile| 1 +
.../stm32mp157a-icore-stm32mp1-ctouch2.dts| 47 +++
2 files changed, 48
This is the initial series to support Engicam MicroGEA STM32MP1 and
i.Core STM32MP1 SoM and it's associated carrier board dts(i) support.
Changes for v2:
- fixed v1 comments
- add i.Core STM32MP1 SoM
Jagan Teki (10):
dt-bindings: arm: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0
ARM
complete platform solutions.
Add support for it.
Signed-off-by: Jagan Teki
---
Changes for v2:
- new patch
.../boot/dts/stm32mp157a-icore-stm32mp1.dtsi | 195 ++
1 file changed, 195 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi
diff --git
-off-by: Matteo Lisi
Signed-off-by: Francesco Utel
Signed-off-by: Mirko Ardinghi
Signed-off-by: Jagan Teki
---
Changes for v2:
- none
.../dts/stm32mp157a-microgea-stm32mp1.dtsi| 147 ++
1 file changed, 147 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp157a
igned-off-by: Matteo Lisi
Signed-off-by: Jagan Teki
---
Changes for v4:
- don't create carrier board dtsi, move changes in final dts.
Changes for v3:
- don't maintain common nodes and include it, if no feature diff
Changes for v2:
- enabled fec1 node
- updated commit message
- dropped engicam
bindings for it.
Signed-off-by: Jagan Teki
Acked-by: Rob Herring
---
Changes for v4:
- collect ack's
Changes for v3:
- fix dt-bindings
Changes for v2:
- update commit message
Documentation/devicetree/bindings/arm/fsl.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git
of this Carrier board for
creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
Add support for it.
Signed-off-by: Matteo Lisi
Signed-off-by: Jagan Teki
---
Changes for v4:
- don't create carrier board dtsi, move changes in final dts.
Changes for v3:
- don't maintain common nodes and include
of Engicam baseboards
for creating complete platform solutions.
Add support for it.
Signed-off-by: Matteo Lisi
Signed-off-by: Jagan Teki
Reviewed-by: Krzysztof Kozlowski
---
Changes for v4:
- collect r-b
Changes for v3:
- keep regulator min/max hoping
Changes for v2:
- updated commit message
for it.
Signed-off-by: Jagan Teki
Reviewed-by: Krzysztof Kozlowski
Acked-by: Rob Herring
---
Changes for v4:
- collect ack's
Changes for v3:
- add proper bindings
Changes for v2:
- updated commit message
Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++
1 file changed, 6 insertions
-b
- fix dt-bindings
Jagan Teki (5):
dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM
arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
On Mon, Jan 25, 2021 at 8:35 PM Alexandre TORGUE
wrote:
>
> Hi,
>
> On 12/23/20 8:13 PM, Jagan Teki wrote:
> > MicroGEA STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
> >
> > General features:
> > - STM32MP157AAC
> > - Up to 1GB
Hi Yannick,
Thanks for testing this change.
On Mon, Feb 15, 2021 at 1:39 PM yannick Fertre
wrote:
>
> Hello Jagan, I tested your patch on the stm32mp1 board.
> Unfortunately, the dsi panel does not probe well with this patch. The
> problem is due to the panel which is placed in the node of the
Hi Riadh,
On Wed, Feb 17, 2021 at 8:44 PM Riadh Ghaddab wrote:
>
> Hi Jagan,
>
> On 20/01/2021 12:21, Jagan Teki wrote:
>
> SN65DSI84 is a Single Channel DSI to Dual-link LVDS bridge from
> Texas Instruments.
>
> SN65DSI83, SN65DSI85 are variants of the same fam
Hi Laurent,
On Wed, Feb 24, 2021 at 6:44 PM Laurent Pinchart
wrote:
>
> Hi Jagan,
>
> On Wed, Feb 24, 2021 at 06:07:43PM +0530, Jagan Teki wrote:
> > On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart wrote:
> > > On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wro
Hi Laurent,
On Mon, Feb 15, 2021 at 5:48 PM Laurent Pinchart
wrote:
>
> Hi Jagan,
>
> Thank you for the patch.
>
> On Sun, Feb 14, 2021 at 11:22:10PM +0530, Jagan Teki wrote:
> > ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
> >
> > It has a flexi
would suggest conforming to that just to
> silence the checkpatch warning.
>
> This patch also passes 'dt_binding_check' and 'dtbs_check', but I
> think I'd like to defer to Rob Herring for an actual r-b.
>
> On Sun, 14 Feb 2021 at 18:55, Jagan Teki wrote:
> >
> > IC
On Mon, Feb 15, 2021 at 2:32 PM Neil Armstrong wrote:
>
> Hi,
>
> On 14/02/2021 18:44, Jagan Teki wrote:
> > SN65DSI83/84/85 devices are MIPI DSI to LVDS based bridge
> > controller IC's from Texas Instruments.
> >
> > SN65DSI83 - Single Channel DSI to S
the bridge chain instead of stacking it so-that the bridges
that got enqueued first can have a chance to trigger first.
Cc: Maarten Lankhorst
Cc: Thomas Zimmermann
Signed-off-by: Jagan Teki
---
Changes for v3:
- new patch
drivers/gpu/drm/drm_bridge.c | 4 ++--
1 file changed, 2 insertions(+), 2
drm_bridge.
This allows splitting connector operations across multiple bridges
when necessary, instead of having the last bridge in the chain
creating the connector and handling all connector operations
internally.
Signed-off-by: Jagan Teki
---
Changes for v3:
- new patch
drivers/gpu/drm/sun4i
,
this new enablement code separation will help to initialize
the host and slave bridge pre_enable, enable functions properly.
Signed-off-by: Jagan Teki
---
Changes for v3:
- new patch
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git
for bridge reset gpio pin
- PB7 gpio for lcd enable gpio pin
- PL4 gpio for backlight enable pin
Signed-off-by: Jagan Teki
---
Changes for v3:
- none
arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts | 85
1 file changed, 85 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r16
DRM bridge drivers have build-in handling of treating all display
pipeline components as bridges.
So, convert the existing to a drm bridge driver with a built-in
encoder support for compatibility with existing component drivers.
Signed-off-by: Jagan Teki
---
Changes for v3:
- new patch
several ways to support hotplug with the bridge but it's
resulting in a deadlock where bind never attach bridge until
bridge pointer found and bridge pointer cannot found until bind
finishes. Any inputs on this would be appreciated.
[1] https://lwn.net/Articles/783127/
Any inputs?
Jagan.
Jagan
for bridge functionalities in Allwinner DSI
controller.
Cc: Samuel Holland
Signed-off-by: Jagan Teki
---
Note:
Samuel Holland, The existing kms hotplug dropped in order to
attach the bridge properly.
However, I did try several ways to support hotplug with the
bridge but it's resulting in a deadlock
Replace of_drm_find_panel with drm_of_find_panel_or_bridge
for finding panel, this indeed help to find the bridge if
bridge support added.
Added NULL in bridge argument, same will replace with bridge
parameter once bridge supported.
Signed-off-by: Jagan Teki
---
Changes for v3:
- none
drivers
ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and
produce RGB565, RGB666, RGB888 output format.
Add dt-bingings for it.
Signed-off-by: Jagan Teki
---
Changes for v3:
- updated to new dt-bindings style
.../display/bridge
ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and
produce RGB565, RGB666, RGB888 output format.
Add bridge driver for it.
Signed-off-by: Jagan Teki
---
Changes for v3:
- updated the driver to inline with new drm bridge style
configuration for Channel A, which
is a common configuration across all the bridge variants.
Add bridge driver for it.
Cc: Marek Vasut
Signed-off-by: Jagan Teki
---
Changes for v3:
- updated macro names to reflect datasheet
- add compatible for 83, 84 variants
- updated comments, kconfig
- fixed few
is supporting Channel A with single
link, so dt-bindings documented according to it.
Cc: Marek Vasut
Signed-off-by: Jagan Teki
---
Changes for v3:
- fixed Rob comments
- updated commit message and file name to support all chip variants
Changes for v2:
- none
.../bindings/display/bridge/ti
On Fri, Feb 5, 2021 at 4:50 AM Marek Vasut wrote:
>
> On 2/4/21 11:29 PM, Laurent Pinchart wrote:
> > Hi Jagan,
> >
> > Thank you for the patch.
> >
> > On Wed, Feb 03, 2021 at 12:42:56PM +0530, Jagan Teki wrote:
> >> SN65DSI84 is a Single Channel
On Wed, Feb 3, 2021 at 2:51 PM Michael Nazzareno Trimarchi
wrote:
>
> Hi
>
> On Wed, Feb 3, 2021 at 8:13 AM Jagan Teki wrote:
> >
> > SN65DSI84 is a Single Channel DSI to Dual-link LVDS bridge from
> > Texas Instruments.
> >
> > SN65DSI83, SN65DSI85
component binding operations for stm drm drivers.
Option 1 is a relatively possible solution as most of the
mainline drm dsi with bridge drivers have a similar approach
to their dsi host vs bridge registration.
Signed-off-by: Jagan Teki
---
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 35
with STM32MP1 MIPI DSI host design configuration.
Signed-off-by: Jagan Teki
---
Changes for v2:
- dropped the mdelays between commands as delays in init script in
datasheet is based Aardvark I2C host adaptor.
https://e2e.ti.com/support/interface/f/138/t/974276
MAINTAINERS
documented with single link LVDS.
Signed-off-by: Jagan Teki
---
Changes for v2:
- none
.../bindings/display/bridge/ti,sn65dsi84.yaml | 127 ++
1 file changed, 127 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/bridge/ti,sn65dsi84.yaml
diff --git
On Wed, Jan 20, 2021 at 4:55 PM Michael Nazzareno Trimarchi
wrote:
>
> Hi Jagan
>
> On Wed, Jan 20, 2021 at 12:22 PM Jagan Teki
> wrote:
> >
> > SN65DSI84 is a Single Channel DSI to Dual-link LVDS bridge from
> > Texas Instruments.
> >
> > SN65DSI
documented with single link LVDS.
Signed-off-by: Jagan Teki
---
.../bindings/display/bridge/ti,sn65dsi84.yaml | 127 ++
1 file changed, 127 insertions(+)
create mode 100644
Documentation/devicetree/bindings/display/bridge/ti,sn65dsi84.yaml
diff --git a/Documentation/devicetree
with STM32MP1 MIPI DSI host design configuration.
Signed-off-by: Matteo Lisi
Signed-off-by: Jagan Teki
---
MAINTAINERS | 6 +
drivers/gpu/drm/bridge/Kconfig| 19 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/ti-sn65dsi84.c | 488
On Thu, Jan 7, 2021 at 10:16 AM Icenowy Zheng wrote:
>
>
>
> 于 2021年1月6日 GMT+08:00 下午5:47:20, Jagan Teki 写到:
> >On Sat, Nov 28, 2020 at 6:23 PM Icenowy Zheng wrote:
> >>
> >> Attaching the panel can fail, so cleanup work is necessary, otherwise
>
uot;drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD
> panel")
The fact that this has failed to probe due to recent changes in
sun6i_mipi_dsi.c I don't know how to put that into the commit message.
> Signed-off-by: Icenowy Zheng
> ---
Reviewed-by: Jagan Teki
On Mon, Dec 28, 2020 at 2:04 PM Krzysztof Kozlowski wrote:
>
> On Mon, 28 Dec 2020 at 09:21, Jagan Teki wrote:
> > > > #include "imx8mm.dtsi"
> > > > #include "imx8mm-beacon-som.dtsi"
> > > > #include "imx8mm-beacon-base
On Thu, Dec 24, 2020 at 3:51 PM Krzysztof Kozlowski wrote:
>
> On Thu, 24 Dec 2020 at 11:08, Jagan Teki wrote:
> >
> > On Thu, Dec 24, 2020 at 2:48 PM Krzysztof Kozlowski wrote:
> > >
> > > On Wed, 23 Dec 2020 at 13:07, Jagan Teki
> > > wrote:
&g
On Thu, Dec 24, 2020 at 2:48 PM Krzysztof Kozlowski wrote:
>
> On Wed, 23 Dec 2020 at 13:07, Jagan Teki wrote:
> >
> > On Wed, Dec 23, 2020 at 5:29 PM Krzysztof Kozlowski wrote:
> > >
> > > On Wed, Dec 23, 2020 at 04:33:41PM +0530, Jagan Teki wrote:
>
board.
Add bindings for it.
Signed-off-by: Jagan Teki
---
Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 7 +++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index
2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
7" Open Frame Solution board.
Add bindings for it.
Signed-off-by: Jagan Teki
---
Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Docu
aces.
MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
7" Open Frame Solution board.
Add support for it.
Signed-off-by: Matteo Lisi
Signed-off-by: Francesco Utel
Signed-off-by: Mirko Ardinghi
Signed-off-by:
-off-by: Matteo Lisi
Signed-off-by: Francesco Utel
Signed-off-by: Mirko Ardinghi
Signed-off-by: Jagan Teki
---
.../dts/stm32mp157a-microgea-stm32mp1.dtsi| 147 ++
1 file changed, 147 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
diff
on STM32MP157A from Engicam.
MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.
Add support for it.
Signed-off-by: Matteo Lisi
Signed-off-by: Francesco Utel
Signed-off-by: Mirko Ardinghi
Signed-off-by: Jagan Teki
.
Possible carrier boards are,
- MicroDev 2.0
- MicroDev 7" Open Frame.
Any inputs?
Jagan.
Jagan Teki (5):
dt-bindings: arm: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0
ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 SoM
ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board
On Wed, Dec 23, 2020 at 5:29 PM Krzysztof Kozlowski wrote:
>
> On Wed, Dec 23, 2020 at 04:33:41PM +0530, Jagan Teki wrote:
> > Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
> > board.
> >
> > Genaral features:
> > - Ethernet 10/10
Add SDA/SCL pinmux lines for I2C6 on STM32MP1.
This support adds both in default and sleep states.
Signed-off-by: Jagan Teki
---
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 17 +
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
b/arch/arm
Enable PF8X00 regulator driver by default as it used in
some of i.MX8MM hardware platforms.
Cc: Catalin Marinas
Cc: Will Deacon
Reviewed-by: Krzysztof Kozlowski
Signed-off-by: Jagan Teki
---
Changes for v3:
- collect Krzysztof r-b
Changes for v2:
- updated commit message
arch/arm64/configs
igned-off-by: Matteo Lisi
Signed-off-by: Jagan Teki
---
Changes for v3:
- don't maintain common nodes and include it, if no feature diff
Changes for v2:
- updated commit message
- dropped engicam from filename since it aligned with imx6 engicam
dts files naming conventions.
arch/arm64/boo
bindings for it.
Signed-off-by: Jagan Teki
---
Changes for v3:
- fix dt-bindings
Changes for v2:
- update commit message
Documentation/devicetree/bindings/arm/fsl.yaml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml
b
for it.
Signed-off-by: Jagan Teki
---
Changes for v3:
- add proper bindings
Changes for v2:
- updated commit message
Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml
b/Documentation/devicetree
baseboards are,
- EDIMM2.2
- C.TOUCH 2.0
Changes for v3:
- don't maintain common nodes and include it, if no feature diff
- keep min/max regulator hoping
- collect Krzysztof r-b
- fix dt-bindings
Any inputs?
Jagan.
Jagan Teki (6):
arm64: defconfig: Enable REGULATOR_PF8X00
dt-bindings: arm: fsl
of Engicam baseboards
for creating complete platform solutions.
Add support for it.
Signed-off-by: Matteo Lisi
Signed-off-by: Jagan Teki
---
Changes for v3:
- keep regulator min/max hoping
Changes for v2:
- updated commit message
- add cpu nodes
- add fec1 node
- fixed pmic tree comments
of this Carrier board for
creating complete i.Core MX8M Mini C.TOUCH 2.0 board.
Add support for it.
Signed-off-by: Matteo Lisi
Signed-off-by: Jagan Teki
---
Changes for v3:
- don't maintain common nodes and include it, if no feature diff
Changes for v2:
- enabled fec1 node
- updated commit message
On Mon, Dec 21, 2020 at 8:17 PM Jagan Teki wrote:
>
> On Mon, Dec 21, 2020 at 8:12 PM Krzysztof Kozlowski wrote:
> >
> > On Mon, Dec 21, 2020 at 08:09:47PM +0530, Jagan Teki wrote:
> > > On Mon, Dec 21, 2020 at 7:35 PM Krzysztof Kozlowski
> > > wrote:
> &
On Tue, Dec 22, 2020 at 2:23 PM Krzysztof Kozlowski wrote:
>
> On Tue, Dec 22, 2020 at 02:20:55PM +0530, Jagan Teki wrote:
> > On Tue, Dec 22, 2020 at 2:36 AM Krzysztof Kozlowski wrote:
> > >
> > > On Tue, Dec 22, 2020 at 01:03:07AM +0530, Jagan Teki wrote:
> &
On Tue, Dec 22, 2020 at 2:36 AM Krzysztof Kozlowski wrote:
>
> On Tue, Dec 22, 2020 at 01:03:07AM +0530, Jagan Teki wrote:
> > On Mon, Dec 21, 2020 at 7:36 PM Krzysztof Kozlowski wrote:
> > >
> > > On Mon, Dec 21, 2020 at 05:01:51PM +0530, Jagan Teki wrote:
> &
On Mon, Dec 21, 2020 at 7:36 PM Krzysztof Kozlowski wrote:
>
> On Mon, Dec 21, 2020 at 05:01:51PM +0530, Jagan Teki wrote:
> > Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
> > Evaluation Board.
> >
> > Genaral features:
> > - LCD 7"
On Mon, Dec 21, 2020 at 7:16 PM Krzysztof Kozlowski wrote:
>
> On Mon, Dec 21, 2020 at 05:01:47PM +0530, Jagan Teki wrote:
> > i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
> >
> > C.TOUCH 2.0 is a general purpose carrier board with capacitive
>
1 - 100 of 1757 matches
Mail list logo