On Tue, 13 Nov 2018 10:11:32 -0800
Mark Brown broo...@kernel.org wrote:
>Please don't do this, the numbering for a patch series only makes sense
>for ordering the patches within a series. If you're just sending a
>single patch then there's no need to number anything, or the patch
>series hasn't
On Fri, 9 Nov 2018 15:30:26 +
Mark Brown broo...@kernel.org wrote:
>On Fri, Nov 09, 2018 at 08:53:56AM +0100, Anatolij Gustschin wrote:
>> Add SPI bus controller driver for FTDI MPSSE mode. This driver
>> is supposed to be used together with the FT232H interface dri
-by: Anatolij Gustschin
---
Changes in v2:
- fix build breakage when building with ARCH=i386 allmodconfig
- add checks for ops->lock/ops->unlock presence in pdata
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-ftdi-mpsse.c
On Tue, 6 Nov 2018 13:07:13 +0800
kbuild test robot l...@intel.com wrote:
...
>from drivers/spi/spi-ftdi-mpsse.c:11:
>>> arch/x86/include/uapi/asm/ptrace-abi.h:20:13: error: expected identifier
>>> before numeric constant
>#define CS 13
>^
>>>
Hi Alan,
On Mon, 5 Nov 2018 12:52:03 -0600
Alan Tull at...@kernel.org wrote:
>On Mon, Nov 5, 2018 at 10:19 AM Anatolij Gustschin wrote:
>
>Hi Anatolij,
>
>>
>> This series adds drivers and FPGA manager support required
>> for FT232H based ARRI FPGA configuration a
Add FPGA manager driver for loading ARRI Altera FPGAs via fast
passive parallel (FPP) interface using FTDI FT232H chip.
Signed-off-by: Anatolij Gustschin
---
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile| 1 +
drivers/fpga/ftdi-fifo-fpp.c | 594
will add an FPP FPGA manager driver for it.
The FTDI protocol code and prototypes was borrowed from libftdi.
Signed-off-by: Anatolij Gustschin
---
drivers/usb/misc/Kconfig|9 +
drivers/usb/misc/Makefile |1 +
drivers/usb/misc/ft232h-intf.c | 1468
for ARRI FPP adapters for
FPGA configuration via Altera fast passive parallel interface.
Anatolij Gustschin (3):
usb: misc: add driver for FT232H based FPGA configuration devices
spi: add FTDI MPSSE SPI controller driver
fpga: Add fpga manager driver for ARRI Altera FPP
drivers/fpga/Kconfig
-by: Anatolij Gustschin
---
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-ftdi-mpsse.c | 671 +++
3 files changed, 679 insertions(+)
create mode 100644 drivers/spi/spi-ftdi-mpsse.c
diff --git a/drivers/spi/Kconfig b/drivers
Hi Geert,
On Fri, 8 Dec 2017 10:27:46 +0100
Geert Uytterhoeven ge...@linux-m68k.org wrote:
[...]
>A quick Google shows the FT232H chip in MPSSE mode can also support i2c.
>I guess your design can be extended for that, too, using another VID/PID
>pair?
Yes, this should be doable.
Thanks,
On Thu, 7 Dec 2017 14:24:57 -0600
Alan Tull at...@kernel.org wrote:
...
>> Instead of MFD part as in previous version I intend to add an USB misc
>> driver for our FPGA configuration adapters under drivers/usb/misc.
>> When probing for VID/PID assigned to FIFO-FPP adapter type, this
>> driver will
Hi,
I have to rework drivers for custom FT232H based FPGA configuration
adapters to make them suitable for including in mainline kernel. These
adapters should be usable via low-level drivers for FPGA Manager
framework. Two required low-level FPGA Manager drivers (for PS-SPI and
CvP
On Tue, 25 Jul 2017 13:49:08 +0200
Johan Hovold jo...@kernel.org wrote:
>On Wed, Jul 19, 2017 at 01:58:30PM +0200, Anatolij Gustschin wrote:
>> On Mon, 10 Jul 2017 14:52:10 +0200
>> Johan Hovold jo...@kernel.org wrote:
>>
>> >On Thu, Jul 06, 2017 at 10:49:16PM +
On Tue, 25 Jul 2017 13:52:35 +0200
Johan Hovold jo...@kernel.org wrote:
>On Wed, Jul 19, 2017 at 02:59:00PM +0200, Anatolij Gustschin wrote:
>> On Wed, 19 Jul 2017 10:59:34 +0200
>> Johan Hovold jo...@kernel.org wrote:
>
>> >> And as David Laight already point
On Wed, 19 Jul 2017 13:39:36 +
David Laight david.lai...@aculab.com wrote:
>From: Anatolij Gustschin
>> Sent: 19 July 2017 14:30
>...
>> >Stupid question, I know, but I cannot help thinking: If you have an
>> >EEPROM then why the h... don't you use an appl
On Wed, 12 Jul 2017 11:11:46 +0200
Bjørn Mork bj...@mork.no wrote:
>Johan Hovold <jo...@kernel.org> writes:
>> On Tue, Jul 11, 2017 at 08:52:37AM +0200, Anatolij Gustschin wrote:
>>
>>> For devices with connected EEPROM some modes (including UART) are
>>>
On Wed, 19 Jul 2017 10:59:34 +0200
Johan Hovold jo...@kernel.org wrote:
...
>> > +static const struct mfd_cell ftdi_cells[] = {
>> > + { .name = "ftdi-cbus-gpio", },
>> > + { .name = "ftdi-mpsse-i2c", },
>> > + { .name = "ftdi-mpsse-spi", },
>> > + { .name = "ftdi-fifo-fpp-mgr", },
>> > +};
On Mon, 10 Jul 2017 14:52:10 +0200
Johan Hovold jo...@kernel.org wrote:
>On Thu, Jul 06, 2017 at 10:49:16PM +0200, Anatolij Gustschin wrote:
>> Add USB part with common functions for USB-GPIO/I2C/SPI master
>> adapters. These allow communication with chip's control, transmit
On Wed, 19 Jul 2017 11:03:11 +0200
Johan Hovold jo...@kernel.org wrote:
>On Thu, Jul 13, 2017 at 06:25:25PM +0200, Anatolij Gustschin wrote:
>> On FT232H the interface mode can be configured in the EEPROM,
>> and the async UART mode is configured by default. The chip is
>> al
On Wed, 12 Jul 2017 10:50:03 +0200
Johan Hovold jo...@kernel.org wrote:
...
>IIRC we should be able read from the EEPROM, and I would at least expect
>there to be a way to retrieve the current mode as well.
I've just send a patch for ftdi_sio.
Thanks,
Anatolij
--
To unsubscribe from this list:
.
Signed-off-by: Anatolij Gustschin <ag...@denx.de>
---
drivers/usb/serial/ftdi_sio.c | 62 ++-
drivers/usb/serial/ftdi_sio.h | 12 +
2 files changed, 73 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/
On Mon, 10 Jul 2017 14:34:27 +0200
Johan Hovold jo...@kernel.org wrote:
>On Fri, Jul 07, 2017 at 11:53:29AM +0200, Anatolij Gustschin wrote:
>> On Fri, 07 Jul 2017 09:48:48 +0200
>> Bjørn Mork bj...@mork.no wrote:
>>
>> >[adding Johan on the CC list]
>> >
On Fri, 07 Jul 2017 09:48:48 +0200
Bjørn Mork bj...@mork.no wrote:
>[adding Johan on the CC list]
>
>Anatolij Gustschin <ag...@denx.de> writes:
>
>> +static struct usb_device_id ftdi_mfd_table[] = {
>> +{ USB_DEVICE(0x0403, 0x6014) },
>> +{
Add USB part with common functions for USB-GPIO/I2C/SPI master
adapters. These allow communication with chip's control, transmit
and receive endpoints and will be used by various FT232H drivers.
Signed-off-by: Anatolij Gustschin <ag...@denx.de>
---
drivers/mfd/Kconfig | 9 +
d
Add FPGA manager driver for loading Altera FPGAs via fast
passive parallel (FPP) interface using FTDI FT232H chip.
Signed-off-by: Anatolij Gustschin <ag...@denx.de>
---
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile| 1 +
drivers/fpga/ftdi-fifo-fpp.c
Add driver for CBUS pins on FT232H. The driver supports setting
GPIO direction and getting/setting CBUS 0-3 pin value. The CBUS
pins have to be enabled by configuring I/O mode in the FTDI EEPROM.
Signed-off-by: Anatolij Gustschin <ag...@denx.de>
---
drivers/gpio/Kconfig
driver for Altera FPP FPGA configuration
via FT232H FT245-FIFO interface.
Anatolij Gustschin (3):
mfd: Add support for FTDI FT232H devices
gpio: Add FT232H CBUS GPIO driver
fpga manager: Add FT232H driver for Altera FPP
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile
On Sat, 30 Nov 2013 23:51:31 +0100
Gerhard Sittig g...@denx.de wrote:
after device tree based clock lookup became available, the peripheral
driver need no longer construct clock names which include the component
index -- remove the usb%d_clk template, always use ipg instead
Cc: Greg
On Fri, 24 May 2013 14:42:46 +
Thumshirn, Johannes Tobias johannes.thumsh...@men.de wrote:
Hi list,
I'm experiencing problems while booting on a Freescale P1013 based board. It
hangs on USB initialization:
[3.763584] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[
On Tue, 9 Apr 2013 09:31:18 -0700
Sarah Sharp sarah.a.sh...@linux.intel.com wrote:
It sounds like u-boot already has basic xHCI support, and you should
contact the u-boot developers for further support of interrupt
transfers.
http://lists.denx.de/mailman/listinfo/u-boot
This is the correct
Hello Florian,
On Tue, 26 Mar 2013 19:06:14 +0100
Florian Fainelli flor...@openwrt.org wrote:
...
diff --git a/arch/powerpc/platforms/52xx/Kconfig
b/arch/powerpc/platforms/52xx/Kconfig
index 90f4496..65232cb 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++
Hi Greg,
On Tue, 4 Dec 2012 14:23:21 +0100
Anatolij Gustschin ag...@denx.de wrote:
fsl-ehci probing fails on mpc5121e:
...
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered
Hi Greg,
On Tue, 4 Dec 2012 10:22:06 -0500 (EST)
Alan Stern st...@rowland.harvard.edu wrote:
On Tue, 4 Dec 2012, Anatolij Gustschin wrote:
mpc5121e doesn't have system interface registers, accessing this
register address space cause the machine check exception and a
kernel crash
.0: can't setup
fsl-ehci fsl-ehci.0: USB bus 1 deregistered
fsl-ehci fsl-ehci.0: init fsl-ehci.0 fail, -22
fsl-ehci: probe of fsl-ehci.0 failed with error -22
Fix it by returning appropriate version info for mpc5121, too.
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
drivers/usb/host/fsl-mph
+0x220/0x284
...
Fix it by checking 'have_sysif_regs' flag before register access.
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
drivers/usb/host/ehci-fsl.c |9 +
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
. Fix it.
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
drivers/usb/otg/Kconfig |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 6223062..37962c9 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
36 matches
Mail list logo
