hi everybody.
if you run ospfd in your setup can you test to confirm the behavior:
setup an interface in ospfdfor example -
ifconfig vlan3 vlandev rl0 192.168.3.0/30 up
add this interface to any known area of ospfd. reload, wait for the
route to propagate. then change ip on vlan3.
ifconfig
Hi!
With today's (11.27) update for -current, tmux hangs after doing:
local$ ssh host
host$ logout
I can't imagine why would it hang because of this, but it does. I have to do
`pkill -9 tmux`.
What other information would be helpful?
dmesg:
OpenBSD 4.6-current (GENERIC.MP) #323: Thu Nov 26
On Friday 27 November 2009 11.25.16 you wrote:
With today's (11.27) update for -current, tmux hangs after doing:
[...]
Never mind, compiling from HEAD is working. Sorry for the noise.
Daniel
--
LIVAI Daniel
PGP key ID = 0x4AC0A4B1
Key fingerprint = D037 03B9 C12D D338 4412 2D83 1373 917A 4AC0
ENTERATE PRESIONANDO
AQUM
I have a home network tat uses an OpenBSD machine as it's firewall. I now
have a company laptop (Windows), and it has some sort of Microsoft VPN. If
it remove my block all rule I can get this VPN up. The corporate
support folks say that it uses port 1723, but putting thta in pf.conf
and restarting
You could fire up the VPN, connect to it from the outside, and then use the
netstat command to see which ports are beeing used knowing the
origin and destination IPs
Regards,
Marcos Laufer
stan wrote:
I have a home network tat uses an OpenBSD machine as it's firewall. I now
have a company
Hi Stan
I will answer your question regarding Microsoft VPN instead. The corporate
support folks might have told you that the most common Microsoft VPN type
[still] is something called PPTP:
http://en.wikipedia.org/wiki/Point-to-point_tunneling_protocol
It uses TCP port 1723 as control channel
You need to allow GRE as well.
-sc
-Original Message-
From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On
Behalf Of stan
Sent: Friday, November 27, 2009 9:56 AM
To: OpenBSD general usage list
Subject: How to determine what ports are being used?
I have a home network
1723 is PPTP. This uses GRE ( generic routing encapsulation ).
You must allow this protocol.
And, as far as I know, openBSD cannot NAT this protocol ( it is possible to
nat GRE for pptp if you peek into the next higher level protocol ( ppp in this
case ? ) but this is not implemented )
So I did
Just built a 4.6 box as a firewall. Have an Adaptec quad-100Mb sf0-based
NIC (64-bit PCI slot). Server is a Compaq DL360 (G1) w/ latest BIOS
(p21).
After some time, packets stop passing, and I'm seeing timeout issues for
sf0 on the console.
Upgraded to 4.6-stable (both kernel and userland).
On Fri, Nov 27, 2009 at 04:17:50PM +0100, Anders Pettersson wrote:
Hi Stan
I will answer your question regarding Microsoft VPN instead. The corporate
support folks might have told you that the most common Microsoft VPN type
[still] is something called PPTP:
On 2009-11-27, stan st...@panix.com wrote:
I have a home network tat uses an OpenBSD machine as it's firewall. I now
have a company laptop (Windows), and it has some sort of Microsoft VPN. If
it remove my block all rule I can get this VPN up. The corporate
support folks say that it uses port
Hello list,
Looking at this faq page http://www.openbsd.org/faq/faq5.html#config
it shows that under OpenBSD 4.5 modifying NMBCLUSTERS is possible.
--- cuted from http://www.openbsd.org/faq/faq5.html#config
$ *sudo config -e /bsd*
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
On Fri, Nov 27, 2009 at 12:01 PM, Marcos Laufer mar...@ipv4networks.com wrote:
Looking at this faq page http://www.openbsd.org/faq/faq5.html#config
it shows that under OpenBSD 4.5 modifying NMBCLUSTERS is possible.
That was very confusing to me, as the FAQ is usually up to date and
this hasn't
Cursuri Gratuite
Salut ,
Ai primit o invitatie la Cursuri Gratuite Online !
- Iti poti alege singur timpul si ritmul de invatare;
- Echipa de profesionisti;
- Usor accesibil;
- Forma de pregatire moderna;
- GRATUIT !
Succes ! www.cursurigratuiteonline.ro !
inter...@yahoo.com
On Thu, Nov 26, 2009 at 03:04:16PM -0800, David Hoskin wrote:
Could you kindly point me to the documentation about OpenBSD make
utility and makefile.
A pretty good tutorial can be found here:
/usr/share/doc/psd/12.make/
Warning: a large part of this documentation is a bit misleading.
I have 4.6 amd64 installed and can't get X to work at 1280x800.
After a default install X won't start and i get an error which i think
is caused by nv. I created a xorg.conf file using X -configure and
then changed the driver from nv to vesa' and was able to get X
running, but only at 800x600
17 matches
Mail list logo