I apologize if this is the wrong place to post this but, Section 3
Checking the kernel of the upgrade49.html doc has version numbers that
probably should be fixed:
...if you had a modified kernel in 4.7, it is likely you will need to
modify the stock kernel of 4.8...
I believe this should be 4.8
On Sun, May 01, 2011 at 12:15:51AM +0200, Benjamin Kiessling wrote:
Hi,
I've been trying to get OpenOSPFd working on OpenBSD 4.8 using an GRE over
IPsec approach. The GRE tunnel is working for unicast IPv4 packets. I've seen
that there are reject routes for 224.0.0.0/4 in the default
Hello sirs,
I have problem to get this system running.
It is Supermicro P8SCi, dmesg and panic messages are below.
I have three identical systens, I tried 4.8 stable, 4.9 official and 4.9
snapshot, all i386 GENERIC and 4.9 snapshot GENERIC.MP
ACPI enabled and disabled.
The result is the same. I
Hi,
ospfd does not need any of the multicast options. ospfd uses the
IP_MULTICAST_IF socket option and bypasses the routing table lookup by
doing so. rtadvd and many other daemons do it in a similar way.
The multicast_host option is only needed for applications that do not use
the special
On Sat, 30 Apr 2011 11:24:30 -0400
Nick Holland n...@holland-consulting.net wrote:
um...
bsd.rd assumes console.
which i don't have and am looking for a workaround. maybe bsd.rd should
assume: accepts commands from a file/stdin to be automated? or even
better: similar to yaifo allow ssh
On Sun, May 01, 2011 at 01:41:44PM +0200, Benjamin Kiessling wrote:
Hi,
ospfd does not need any of the multicast options. ospfd uses the
IP_MULTICAST_IF socket option and bypasses the routing table lookup by
doing so. rtadvd and many other daemons do it in a similar way.
The
Hi,
Are you sure that you're not blocking the ospf or gre packets with pf?
The hello timer is running and so hello packets should be generated and
sent. Since there are no errors from ospf when sending packets I assume
that the problem is in gre(4). Can you ping the remote end of the gre
looks like a setup bug in the non-attachment of inteldrm?
try disabling inteldrm in the UKC
(boot -c
disable inteldrm
quit)
Ivo Chutkin [open...@bgone.net] wrote:
Hello sirs,
I have problem to get this system running.
It is Supermicro P8SCi, dmesg and panic messages are below.
I have three
On 30 April 2011 22:21, Mark Felder f...@feld.me wrote:
You're missing the point.
I don't see what your point is at all.
You're argument is basically like saying, Well, I can't stop drunk
people and other incompetents from driving, so there's no point in
even trying to do the things that are
May 1, 2011.
We are pleased to announce the official release of OpenBSD 4.9.
This is our 29th release on CD-ROM (and 30th via FTP). We remain
proud of OpenBSD's record of more than ten years with only two remote
holes in
Hello,
is somehow possible to enable jumbo frames on BCM5716? I have applied
patch from Jonathan Gray --
http://marc.info/?l=openbsd-techm=130409059829496w=2
in hope that maybe jumbo frames would work, but it didn't ...
Is jumbo frames somehow realated to brgphy?
# ifconfig bnx1 mtu 9000
Hi Chris,
It solves the problem and system boots normally.
Do I need to compile custom kernel and disable inteldrm there?
Thanks for the help,
Ivo
On 1.5.2011 P3. 17:10 Q., Chris Cappuccio wrote:
looks like a setup bug in the non-attachment of inteldrm?
try disabling inteldrm in the UKC
(boot
On 05/01/11 07:13, David Steiner wrote:
On Sat, 30 Apr 2011 11:24:30 -0400
Nick Holland n...@holland-consulting.net wrote:
um...
bsd.rd assumes console.
which i don't have and am looking for a workaround. maybe bsd.rd should
assume: accepts commands from a file/stdin to be automated?
On Sun, May 01, 2011 at 05:57:47PM +0300, Ivo Chutkin wrote:
Hi Chris,
It solves the problem and system boots normally.
Do I need to compile custom kernel and disable inteldrm there?
Thanks for the help,
config -e /bsd
should allow you to make the disable permanent.
FWIW i just commited a
On 05/01/11 12:30, Amit Kulkarni wrote:
Nick,
I have always assumed that you don't run X, i.e you kill X and then
you upgrade from a root console.
I do run X on a lot of systems. I'm writing to you on a machine with
two 24 1920x1200 flat panels running a lot of xterms, Firefox, Chrome,
Is the absence of a graphical browser from the base system
a statement that any attempt to do such things as look at
stuff on youtube is inherently unsafe?
Is tor considered a safe way to do anonymous browsing, or
does openbsd recommend an alternative?
On Sun, May 01, 2011 at 11:35:04AM -0500, Charles Blair wrote:
Is the absence of a graphical browser from the base system
a statement that any attempt to do such things as look at
stuff on youtube is inherently unsafe?
There are various reasons why there is no graphical browser in base. I
OpenBSD uses a monolithic kernel -- all the parts to the kernel are in
the kernel file, which is loaded into RAM at boot. You may now safely
delete the kernel if you so desire once the system is booted, it isn't
used until the next boot. You may also REPLACE the kernel, it has NO
impact on
No respondas directamente a este mismo correo, ya que es un buzsn no
monitoreado.
LoQueQuierasYA.com Diseqo Web en Mixico
Contamos con un equipo de profesionales con amplia experiencia en Diseqo
Web, Posicionamiento en Buscadores, Programacisn Web, y Comunicacisn
Visual.
* Estudiamos las
On 2011-05-01, Amit Kulkarni amitk...@gmail.com wrote:
1) pkg_delete all installed packages after taking backups of
configuration files + data
why on earth would you do this?
PROGRAMA DE FORMACISN REGULAR DE METROLOGOS EN CSRDOBADEL 21 AL 22 DE AGOSTO
2008 APRENDA A CALCULAR LA INCERTIDUMBRE EN SUS CALIBRACIONES O MEDICIONES
(Teorma)(El curso avalado con una media superior a 9,0)
A QUIIN SE DESTINA
A los Ticnicos e Ingenieros de los sectores de garantma de
Hi Robert,
have a look at the manpage for rtw (EXAMPLES).
the options are explained in the manpage for ifconfig.
Before posting I tried # ifconfig rt20 nwkey 0x example from rtw(4).
Although it executes without error, the rtw0 status remains no network. The
example doesn't specify
On 1 May 2011 12:35, Charles Blair c-bl...@illinois.edu wrote:
B Is the absence of a graphical browser from the base system
a statement that any attempt to do such things as look at
stuff on youtube is inherently unsafe?
Not speaking officially, but, as I understand it, the general idea is
Scratch that, I did not read smtpd(8) carefully enough.
Sorry for the noise.
On Sun, May 1, 2011 at 7:23 PM, Anthony J. Bentley
anthonyjbent...@gmail.com wrote:
I recently upgraded to a snapshot and tried to set up smtpd.
But the first example in the smtpd.conf(5) manpage fails with a usage
I recently upgraded to a snapshot and tried to set up smtpd.
But the first example in the smtpd.conf(5) manpage fails with a usage error:
# makemap /etc/mail/secrets
Usage: makemap [-C cffile] [-N] [-c cachesize] [-D commentchar]
[-d] [-e] [-f] [-l] [-o] [-r] [-s] [-t delimiter]
On 05/01/2011 09:16 AM, Bob Beck wrote:
May 1, 2011.
We are pleased to announce the official release of OpenBSD 4.9.
This is our 29th release on CD-ROM (and 30th via FTP). We remain
proud of OpenBSD's record of more than
On Mon, May 2, 2011 at 3:05 AM, Kraktus krak...@googlemail.com wrote:
On 1 May 2011 12:35, Charles Blair c-bl...@illinois.edu wrote:
B B Is the absence of a graphical browser from the base system
a statement that any attempt to do such things as look at
stuff on youtube is inherently unsafe?
27 matches
Mail list logo
