On 01/14/15 13:13, Evgeny Zhavoronkov wrote:
On 01/14/15 12:37, Evgeny Zhavoronkov wrote:
Hi, All!
I get these errors when actively use usb wifi adapter
Jan 14 16:08:57 t4 /bsd: 0x4f4e5155
Jan 14 16:08:57 t4 /bsd: usb_insert_transfer: xfer=0xfe821cb7c348
not busy 0x4f4e5155
Jan 14 16:08:57
I bought a can of this paint from a hardware store up in Lake Louise last
week.
On Wed, 14 Jan 2015, Theo de Raadt wrote:
On 2015-01-14, mar...@martinbrandenburg.com mar...@martinbrandenburg.com
wrote:
Buying a CD in my case includes a 5.000 mile trip through multiple
five-eyes nations,
I bought a can of this paint from a hardware store up in Lake Louise last
week.
We already knew that.
2015-01-14 17:41 GMT+01:00 Stefan Sperling s...@stsp.name
OpenBSD's implementation of rate adaptation is basic. It's possible
that you'll see the AP sending data frames at less than 54Mbit/s under
normal conditions. You'll probably see better results with other OSs
since they have better
On 2015-01-14, Stefan Sperling s...@stsp.name wrote:
15Mbit/s sounds as if it maxes out at 18Mbit/s (the highest QPSK rate)
and never switches to OFDM rates (24 - 54 Mbit/s).
IEEE 802.11 still uses a shared medium and CSMA/CA, right? (Wikipedia
says so.) So the transfer between two nodes is
On Wed, Jan 14, 2015 at 08:24:02PM +, Christian Weisgerber wrote:
On 2015-01-14, Stefan Sperling s...@stsp.name wrote:
15Mbit/s sounds as if it maxes out at 18Mbit/s (the highest QPSK rate)
and never switches to OFDM rates (24 - 54 Mbit/s).
IEEE 802.11 still uses a shared medium and
hello,
at [1], I read something about 'Sigtramp separation' within
the W^X transition. I only know that this sigtramp-page (?) is
used to jump back into the kernel when a signal arrives.
My question is, what exactly is this signal trampoline?
Why do I need it?
Why was it on the
See page 159 of the recent second edition of McKusick's book on the BSD
kernel. It's FreeBSD centric, but its the same concepts.
On Jan 14, 2015 6:31 PM, Theo de Raadt dera...@cvs.openbsd.org wrote:
at [1], I read something about 'Sigtramp separation' within
the W^X transition. I only
On Wed, Jan 14, 2015 at 3:10 PM, Stefan Berger
berger...@wolfman.devio.us wrote:
at [1], I read something about 'Sigtramp separation' within
the W^X transition. I only know that this sigtramp-page (?) is
used to jump back into the kernel when a signal arrives.
My question is, what exactly
at [1], I read something about 'Sigtramp separation' within
the W^X transition. I only know that this sigtramp-page (?) is
used to jump back into the kernel when a signal arrives.
My question is, what exactly is this signal trampoline?
That is not what the slides say.
Why do I need
On 1/14/2015 9:47 AM, Predrag Punosevac wrote:
and I ran
the chroot enable script from rrdtool.
As documented in the rrdtool pkg-readme, you must do:
/usr/local/share/examples/rrdtool/rrdtool-chroot enable
You should look under /usr/local/share/doc/pkg-readmes/, it comes with a
*lot* of
Steve Shockley wrote:
I've installed Symon/Symux/Syweb on a 5.6 machine for testing.
Symon+Symux are up and running. I installed apache-httpd-openbsd (at
least until I'm familiar with httpd), set up the virtual host, and I ran
the chroot enable script from rrdtool.
When I view
Please how is one supposed to verify the integrity of an official
OpenBSD 5.6 commercial CD set, bought on the OpenBSD store and
received by physical mail? [...]
Each directory on the CD is signed using signify and the 5.6 keys
listed at http://www.openbsd.org/56.html [...]
On Tue, Jan 13, 2015 at 06:52:00PM +0100, Christer Solskogen wrote:
On Tue, Jan 13, 2015 at 5:45 PM, Jonathan Gray j...@jsg.id.au wrote:
Your earlier mail had a different load address than what I'd expect.
Try 0x1880
Same. I've tried the following staring adresses: 0x1060 -
On 01/14/2015 07:19 AM, Indunil Jayasooriya wrote:
Hi misc,
I have /etc/ip_list1 file containing some destinations.
format of /etc/ip_list1 is given below.
1.2.3.4
1.6.3.0/24
I want to route ALL DESTINATIONS listed in /etc/ip_list1 via wan1_gw. The
rest of trafficc , I want to route via
Hello,
I've set up a small wifi AP using alix 3d2 computer board and Mikrotik
R52nM mini PCI wireless adapter. Works great except for wireless
throughput. It's running 5.6 stable, usual AP setup (wifi adapter in
hostap mode, dhcpd, nat in pf). No sysctls or anything not mentioned in
FAQ was
On 01/13/15 16:26, Landry Breuil wrote:
[ .. snip .. ]
On 1/10/15, Landry Breuil lan...@rhaalovely.net wrote:
[ .. snip .. ]
Interesting, your cpu doesnt have SSSE3 nor SSE4.1, while binutils/the
configure script detects so.. that might explain why it built here and
not on your machine. That
On Wed, Jan 14, 2015 at 19:35 +, Fred wrote:
On 01/14/15 13:13, Evgeny Zhavoronkov wrote:
On 01/14/15 12:37, Evgeny Zhavoronkov wrote:
Hi, All!
I get these errors when actively use usb wifi adapter
Jan 14 16:08:57 t4 /bsd: 0x4f4e5155
Jan 14 16:08:57 t4 /bsd: usb_insert_transfer:
On Wed, Jan 14, 2015 at 21:24:15 -0500, Steve Shockley wrote:
On 1/14/2015 9:47 AM, Predrag Punosevac wrote:
and I ran
the chroot enable script from rrdtool.
As documented in the rrdtool pkg-readme, you must do:
/usr/local/share/examples/rrdtool/rrdtool-chroot enable
You should look
On 14/01/2015 17:03, mar...@martinbrandenburg.com wrote:
[...] you trust Theo and OpenBSD because you have no better option.
Don't pretend you increase your security by proving the software came
from a source you can't prove is trustworthy. [...]
More than Theo himself, what makes me trust
Hi,
as i am always searching for new (low power) hardware, today i found
something new.
It sounds quite nice for running openbsd as a router/firewall.
It is possible that not everything is supported right now in openbsd
but the low power and number of nics made me smile.
It might be availiable
On 2015-01-14, mar...@martinbrandenburg.com mar...@martinbrandenburg.com
wrote:
Buying a CD in my case includes a 5.000 mile trip through multiple
five-eyes nations, whose overzealous three letter agencies officially
intercept physical shipments to install backdoors and hardware implants.
On Wed, Jan 14, 2015 at 04:40:00PM +0100, Ján Kušniar wrote:
Hello,
I've set up a small wifi AP using alix 3d2 computer board and Mikrotik
R52nM mini PCI wireless adapter. Works great except for wireless
throughput. It's running 5.6 stable, usual AP setup (wifi adapter in
hostap mode,
Enos D'Andrea temp4282138...@edlabs.it wrote:
On 14/01/2015 12:24, Stefan Sperling wrote:
Bootstrapping trust is always going to be hard no matter what we do
and how hard we try. [...] Now the answer has become buy a CD
and cross-check it with signify and it's still not enough. [...]
Christian Weisgerber na...@mips.inka.de wrote:
On 2015-01-14, mar...@martinbrandenburg.com mar...@martinbrandenburg.com
wrote:
Buying a CD in my case includes a 5.000 mile trip through multiple
five-eyes nations, whose overzealous three letter agencies officially
intercept physical
On Wed, Jan 14, 2015 at 02:32:07PM +0100, Enos D'Andrea wrote:
Buying a CD in my case includes a 5.000 mile trip through multiple
five-eyes nations, whose overzealous three letter agencies officially
intercept physical shipments to install backdoors and hardware implants.
On 2015-01-14, Ján Kušniar jkusn...@gmail.com wrote:
Even though it's running 54Mbit 802.11g, I can't get over ~15Mbit/s.
Uh, what figures do you expect? Those 54 Mbit/s are raw modem
speed. You'll never get throughput anywhere close to that.
I get ~20 Mbit/s between my OpenBSD laptop with
On 2015-01-14, mar...@martinbrandenburg.com mar...@martinbrandenburg.com
wrote:
Buying a CD in my case includes a 5.000 mile trip through multiple
five-eyes nations, whose overzealous three letter agencies officially
intercept physical shipments to install backdoors and hardware
Theo de Raadt wrote:
Finding them inside the global shipping system is easier than you
think
One of the joys of growing old is watching the really bad sci fi you read as a
youth all come true :)
--
Jack Woehr # There's too much emphasis on things
Box 51, Golden CO 80402 #
On Wed, Jan 14, 2015 at 3:39 PM, Jonathan Gray j...@jsg.id.au wrote:
I've updated the kernel at
http://jsg.id.au/openbsd/bsd.IMX.umg
And we have lift-off!
## Booting kernel from Legacy Image at 1080 ...
Image Name: boot
Created: 2015-01-14 14:13:27 UTC
Image Type: ARM
On 2015-01-13, sven falempin sven.falem...@gmail.com wrote:
Dear OpenBSD users,
Recently unbound made his way in base, pushing the complex bind/named
out for our own good.
I would like to internally and externally solve some domain names
differently (so some service are accessible from
On 14/01/15 02:33, Jason Adams wrote:
On 01/13/2015 01:26 PM, sven falempin wrote:
Dear OpenBSD users,
Recently unbound made his way in base, pushing the complex bind/named
out for our own good.
I would like to internally and externally solve some domain names
differently (so some service are
On 2015-01-13, Jeremy Evans jeremyeva...@gmail.com wrote:
On Tue, Jan 13, 2015 at 12:58 PM, Riccardo Mottola
riccardo.mott...@libero.it wrote:
do we really need bash to build ruby? and... why ruby for subversion? not
counting shells one ends up having perl, python, tcl and ruby! what a
On 2015-01-13, Patrick Wildt m...@patrick-wildt.de wrote:
Hi,
Yes, it’s kinda possible. I tried that early 2014 or so. You need to have
some kind of EFI-Grub2 on an sdcard iirc. Then you exit the in-built grub,
open the EFI shell and have it boot grub2.
Using kopenbsd you can try to load
On 2015-01-13 Tue 16:26 PM |, sven falempin wrote:
I would like to internally and externally solve some domain names
differently (so some service are accessible from inside and outside
without some fancy NAT or worse), I found out 'some' call this setup a
'split-dns', often use for internal
On 01/14/15 12:37, Evgeny Zhavoronkov wrote:
Hi, All!
I get these errors when actively use usb wifi adapter
Jan 14 16:08:57 t4 /bsd: 0x4f4e5155
Jan 14 16:08:57 t4 /bsd: usb_insert_transfer: xfer=0xfe821cb7c348
not busy 0x4f4e5155
Jan 14 16:08:57 t4 last message repeated 1006 times
Jan 14
On Wed, Jan 14, 2015 at 10:49:01AM +0100, Enos D'Andrea wrote:
Thanks, but I was hoping for a method that would also verify the CD boot
process, and that would not require downloading and installing a second
image or trusting the CD to verify itself.
Bootstrapping trust is always going to be
On 12/01/2015 20:34, Theo de Raadt wrote:
Please how is one supposed to verify the integrity of an official
OpenBSD 5.6 commercial CD set, bought on the OpenBSD store and
received by physical mail? [...]
Each directory on the CD is signed using signify and the 5.6 keys
listed at
Thanks, but I was hoping for a method that would also verify the CD boot
process, and that would not require downloading and installing a second
image or trusting the CD to verify itself.
Next time, it is better to ask what you hope for. You asked how to
check and you got the answer, then you
Hi, All!
I get these errors when actively use usb wifi adapter
Jan 14 16:08:57 t4 /bsd: 0x4f4e5155
Jan 14 16:08:57 t4 /bsd: usb_insert_transfer: xfer=0xfe821cb7c348
not busy 0x4f4e5155
Jan 14 16:08:57 t4 last message repeated 1006 times
Jan 14 16:08:57 t4 /bsd: athn0: could not wakeup chip
On Wed, Jan 14, 2015 at 4:41 AM, Craig Skinner skin...@britvault.co.uk wrote:
On 2015-01-13 Tue 16:26 PM |, sven falempin wrote:
I would like to internally and externally solve some domain names
differently (so some service are accessible from inside and outside
without some fancy NAT or
On 14/01/2015 12:24, Stefan Sperling wrote:
Bootstrapping trust is always going to be hard no matter what we do
and how hard we try. [...] Now the answer has become buy a CD
and cross-check it with signify and it's still not enough. [...]
paranoia
Buying a CD in my case includes a 5.000 mile
Am 14.01.2015 um 09:43 schrieb Stuart Henderson s...@spacehopper.org:
On 2015-01-13, Patrick Wildt m...@patrick-wildt.de wrote:
Hi,
Yes, it’s kinda possible. I tried that early 2014 or so. You need to have
some kind of EFI-Grub2 on an sdcard iirc. Then you exit the in-built grub,
open
On 01/14/15 12:37, Evgeny Zhavoronkov wrote:
Hi, All!
I get these errors when actively use usb wifi adapter
Jan 14 16:08:57 t4 /bsd: 0x4f4e5155
Jan 14 16:08:57 t4 /bsd: usb_insert_transfer: xfer=0xfe821cb7c348
not busy 0x4f4e5155
Jan 14 16:08:57 t4 last message repeated 1006 times
44 matches
Mail list logo
