> I had near the same question sometime ago but on different machine, and I've
> discovered a patch which I've inlinded into this email.
>
Hm, ok, i'll try it. Do you have any insight into whether obsdfreqd has similar
power saving to this patch? It seems to set the perf similarly. I wasn't
Greetings,
On Sun, 28 Apr 2024 18:53:09 +0200,
"Nathaniel Griswold" wrote:
>
> Any ideas if it's remediable or where to start digging?
>
I had near the same question sometime ago but on different machine, and I've
discovered a patch which I've inlinded into this email.
My laptop on last
On Mon, Apr 29, 2024, at 5:06 AM, Polarian wrote:
> Hello,
>
> Just a quick thing I wanted to point out.
>
> > I have no idea why my charge cycles is so low. It's at 5 now. And i
> > tested that on Linux, too, so it's not just OpenBSD.
>
> Having low charge cycles is good, that isn't the
On Mon, Apr 29, 2024 at 01:47:45AM +0200, Odd Martin Baanrud said:
I’m planning to set up a VPN on my router with iked(8).
The first goal is to have my Macbook and iPhone connected, both to route the
traffic thrugh my router at home, and to get access to the services running on
a machine
On Mon, Apr 29, 2024 at 05:35:49PM +0200, Janne Johansson wrote:
> > Any help is much appreciated. The ER-8 right now idles a lot anyhow and
> > I plan on using it for the 8 RJ45 ports.
>
> I run some Pro 8s in a small rack where I have ripped out the internal
> fan of the edgerouters, and then
Den mån 29 apr. 2024 kl 15:41 skrev Peter J. Philipp :
>
> Hi,
>
> What sort of things can I do to keep an edgerouter 8 cool that doesn't have
> fans? I'm ready to pull the fans out of it because they have a certain
> harmonic that makes me physically ill. But I like the octeon!
>
> So short of
I replaced my 8 Pro fans with Noctua units and I'm pretty happy with them;
they came with several adapters that allow you to choose the speed of the
fans.
Converting to passive cooling, if you have enough room on the cabinet and
are a proficient user of drills, I'd try to (i) remove the heatsink
On Mon, Apr 29, 2024 at 4:42 PM Peter J. Philipp
wrote:
> Hi,
>
> What sort of things can I do to keep an edgerouter 8 cool that doesn't have
> fans? I'm ready to pull the fans out of it because they have a certain
> harmonic that makes me physically ill. But I like the octeon!
>
> So short of
> Did you inject RPI UEFI firmware into the BOOT partition?
Are you talking about some third-party bootloader software? No, I'm
using the default U-Boot that comes with the miniroot. No modification
required.
Hi,
What sort of things can I do to keep an edgerouter 8 cool that doesn't have
fans? I'm ready to pull the fans out of it because they have a certain
harmonic that makes me physically ill. But I like the octeon!
So short of throwing it out I'm thinking of pulling the plug (on the fans).
Would
On Sat, 27 Apr 2024 17:11:56 +0200
"Cristian Danila" wrote:
> Dear Misc,
>
> I would really appreciate if someone can give
> me a hint on how can make emmc card bootable
> on a RockPro64 board.
> This is what I did:
> 1) prepared micro sd card:
> dd if=install75.img of=/dev/sdg bs=1024M
> dd
Has anyone tried this? I read that Microsoft has Hyper-V for ARM.
I've been running OpenBSD on amd64 hardware in Hyper-V for a while. I suspect
there wouldn't be endian issues since arm64 and amd64 are both LE, is there any
other concerns?
I'm inquiring because mainly I know I have my sights
12 matches
Mail list logo
