On Thu, Jun 09, 2011 at 05:01:39PM +, Christian Weisgerber wrote:
Eventually I also picked up a Sweex SC015 card. (These are readily
available in Europe at the time of writing.)
cmpci0 at pci1 dev 2 function 0 C-Media Electronics CMI8738/C3DX Audio rev
0x10: ivec 0x7d5
audio1 at
On Wed, Jun 08, 2011 at 10:51:35AM +0800, Nick Coleman wrote:
I would like to get a USB webcam working on my PowerPC OpenBSD 4.9
install. I'm an OpenBSD newbie.
When I plug it in, the kernel registers the USB device, but doesn't
go any further to recognise it as a video device. The last
On Fri, Jun 03, 2011 at 06:59:17PM -0500, Amit Kulkarni wrote:
The dmesg is needed. This looks like the disk/usb stick is not being
found by the OS.
I was afraid of that.
Dealing with the first apparent problem, that most of the dmesg scrolls
off the screen, looks to be easy; a quick
On Tue, May 10, 2011 at 12:21:53PM +0200, David Coppa wrote:
On Tue, May 10, 2011 at 12:04 PM, LEVAI Daniel l...@ecentrum.hu wrote:
Hi!
I'm trying out youtube with html5 videos, and I have few question to the
fellow video watchers.
In mozilla-firefox I can't even enable html5 in
On Sun, May 08, 2011 at 08:18:39PM +0200, Jan Stary wrote:
On May 07 12:21:30, Alexandre Ratchov wrote:
On Sat, May 07, 2011 at 10:52:09AM +0200, Jan Stary wrote:
I just bought me the new M-Audio USB MobilePre (MK-II):
uaudio0 at uhub2 port 2 configuration 1 interface 0 M-Audio
On Wed, Apr 20, 2011 at 09:54:17PM -0400, Kent Watsen wrote:
2. no sound
---
Still no sound
Like reported lasted time, this may be due to the 'azalia' driver being used
instead of the 'auich' driver. I deduced this before since sound worked
under Linux where the audio device as
On Sat, Mar 19, 2011 at 05:06:44PM -0600, Anthony J. Bentley wrote:
Hi,
I have a USB webcam. No model number on the cam, but looks to be a
Logitech QuickCam Communicate STX.
When I plug it in, I get this:
uaudio0 at uhub1 port 1 configuration 1 interface 1 Logitech Camera rev
On Sun, Mar 20, 2011 at 11:47:19AM -0600, Anthony J. Bentley wrote:
Hi Jacob,
uaudio0 at uhub1 port 1 configuration 1 interface 1 Logitech Camera rev
2.0
0/1.00 addr 2
uaudio0: audio descriptors make no sense, error=4
ugen0 at uhub1 port 1 configuration 1 Logitech Camera rev
On Mon, Feb 28, 2011 at 11:57:20PM +0100, pet...@schwertfisch.de wrote:
Hi,
using a recent snapshot of 4.9, some USB devices are no longer
attached on boot. They used to be detected/attached automatically
in OpenBSD 4.8.
The dmesg outputs attached below show how my KORG nanokontrol midi
On Tue, Feb 22, 2011 at 08:05:57AM +, Dennis den Brok wrote:
Jacob Meuser jake...@sdf.lonestar.org wrote:
there's no usbdevs data for Kyocera product 0x0015. so not getting
a product name isn't terribly surprising. the device could provide
this but it isn't required. however
On Tue, Feb 22, 2011 at 08:21:48PM +, Dennis den Brok wrote:
Kenneth R Westerback kwesterb...@rogers.com write:
Are there powered/unpowered hubs involved? This sounds like marginal power
might be a culprit. i.e. more power would resolve it. As it does most
things. :-)
Well, the
On Mon, Feb 21, 2011 at 11:27:00PM +, Dennis den Brok wrote:
Dennis den Brok d.den.b...@uni-bonn.de schrieb:
I'm running a recent snapshot of 4.9/i386 and occasionally have to
reboot the system because USB devices seemingly randomly stop
working. The only symptom apart from that which
On Thu, Feb 17, 2011 at 12:33:51PM -0600, Bryan wrote:
On Thu, Feb 17, 2011 at 11:37, Bryan bra...@gmail.com wrote:
I have an MW600 from Sony Ericsson, that I can pair to my Droid, and
the passcode is . B I recently picked up a SparkLAN WPEA-111N
which attaches to ral(4) and ubt(4):
On Tue, Feb 01, 2011 at 03:59:02PM +0100, Manuel Giraud wrote:
Jacob Meuser jake...@sdf.lonestar.org writes:
foomatic is pretty easy to set up.
Thread hijacker here. I tried to setup a lpd/foomatic for a printer over
network and always end-up with this kind of message in
/var/log/lpd
On Mon, Jan 31, 2011 at 09:37:24AM +, Dennis den Brok wrote:
Jan Stary h...@stare.cz schrieb:
fo just forces a form feed;
it doesn't turn PS support on/off or whatever.
Certainly not, but it seems the printer is picky about recognizing
PostScript as such. I don't know what data
On Sun, Jan 30, 2011 at 12:57:20PM -0500, Ted Unangst wrote:
On Sat, Jan 29, 2011 at 11:48 PM, Bryan bra...@gmail.com wrote:
I have been hampered with this for a few years now, and at most times,
it was easier to copy the file to a Windows box and print. But I'm
tired of having to do this,
On Sun, Jan 30, 2011 at 02:39:23PM +0100, MERIGHI Marcus wrote:
mayur...@kathe.in (Mayuresh Kathe), 2011.01.30 (Sun) 09:57 (CET):
i plan to purchase the following device;
http://www.edimax.com/en/produce_detail.php?pd_id=289pl1_id=13pl2_id=78
i intend to use it to connect to the internet
On Thu, Jan 27, 2011 at 04:58:39AM -0500, sergey.k...@gmail.com wrote:
Today I've checked audio support.
azalia0 at pci0 dev 27 function 0 Intel SCH HD Audio rev 0x07: apic 2
int 22 (irq 10)
azalia0: codecs: Realtek ALC272
audio0 at azalia0
With vorbis-tools-1.4.0
On Thu, Jan 27, 2011 at 12:55:51AM +1030, David Walker wrote:
I have a machine at work, beige box with 4.8 on it that doesn't like hotplugd.
I thought it might be the issue with 16 USB devices failing attach so
Any ideas welcome.
try -current
--
jake...@sdf.lonestar.org
SDF Public Access
I have gotten reports that multiple filesystems on umass(4) doesn't
work, but haven't had a chance to look into it. apparently you are
hitting the same issue.
On Sat, Jan 15, 2011 at 05:22:40PM -0600, Ed Ahlsen-Girard wrote:
On Sat, 15 Jan 2011 16:25:43 -0600
Ed Ahlsen-Girard eagir...@cox.net
On Sun, Jan 16, 2011 at 10:23:09AM +1100, Brett wrote:
On 01/16/11 09:25, Ed Ahlsen-Girard wrote:
New disk for backups (1TB, first 250G NTFS for a Windows box, 500G ffs,
^^^
remainder unpartitioned, so:
16 partitions:
#size offset fstype
On Tue, Jan 11, 2011 at 04:14:50PM +0100, Benjamin Nadland wrote:
If I run kismet this (handwritten transcript) happens:
# kismet
[some kismet initialization output]
Gathering packets...
[from now on text is white on blue]
uvm_fault(0xd0a26a60, 0xf000, 0, 1) - e
kernel: page fault trap,
On Sat, Jan 01, 2011 at 07:03:52AM -0600, Ed Ahlsen-Girard wrote:
First, Happy New Year!
I resolved last week to stop using Windows to print from my OpenBSD
machine, so I re-read man pages for and re-tried CUPS, lpd, foomatic,
etc. As it stands now, here is my printcap:
# $OpenBSD:
On Sat, Jan 01, 2011 at 02:07:02PM -0600, Ed Ahlsen-Girard wrote:
Jacob Meuser jakemsr () sdf ! lonestar ! org wrote
at 2011-01-01 19:34:40:
On Sat, Jan 01, 2011 at 07:03:52AM -0600, Ed Ahlsen-Girard wrote:
First, Happy New Year!
I resolved last week to stop using Windows to print
On Sun, Jan 02, 2011 at 12:26:38AM +, Jacob Meuser wrote:
On Sat, Jan 01, 2011 at 02:07:02PM -0600, Ed Ahlsen-Girard wrote:
Jacob Meuser jakemsr () sdf ! lonestar ! org wrote
at 2011-01-01 19:34:40:
On Sat, Jan 01, 2011 at 07:03:52AM -0600, Ed Ahlsen-Girard wrote:
First
On Sat, Jan 01, 2011 at 07:52:24PM -0600, Ed Ahlsen-Girard wrote:
Jacob Meuser jakemsr () sdf ! lonestar ! org
at 2011-01-02 0:26:38 wrote:
On Sat, Jan 01, 2011 at 02:07:02PM -0600, Ed Ahlsen-Girard wrote:
Jacob Meuser jakemsr () sdf ! lonestar ! org wrote
at 2011-01-01 19:34:40
On Sat, Jan 01, 2011 at 10:01:20PM -0600, Ed Ahlsen-Girard wrote:
Jacob Meuser jakemsr () sdf ! lonestar ! org wrote
at 2011-01-02 1:24:20 wrote:
On Sun, Jan 02, 2011 at 12:26:38AM +, Jacob Meuser wrote:
On Sat, Jan 01, 2011 at 02:07:02PM -0600, Ed Ahlsen-Girard wrote:
Jacob
On Sun, Dec 26, 2010 at 12:46:14PM +0100, ??? ??? wrote:
On Tue, Dec 14, 2010 at 4:55 PM, Jacob Meuser jake...@sdf.lonestar.org
wrote:
On Tue, Dec 14, 2010 at 03:39:23PM +0100, Dmitrij D. Czarkoff wrote:
I have found my external microphone (mic2) not working under OpenBSD
-current
On Sun, Dec 26, 2010 at 09:36:08PM +0200, Alexey Suslikov wrote:
Jacob Meuser wrote:
On Sun, Dec 26, 2010 at 12:46:14PM +0100, ??? ??? wrote:
On Tue, Dec 14, 2010 at 4:55 PM, Jacob Meuser jake...@sdf.lonestar.org
wrote:
On Tue, Dec 14, 2010 at 03:39:23PM +0100, Dmitrij D
On Thu, Dec 23, 2010 at 10:40:27PM +0100, Jean-Francois wrote:
Le Wednesday 22 December 2010 23:40:03, Jacob Meuser a icrit :
On Wed, Dec 22, 2010 at 11:20:47PM +0100, Jean-Francois wrote:
Hello,
I would like to use a printer on the server and share it like samba
supports, have
On Wed, Dec 22, 2010 at 11:20:47PM +0100, Jean-Francois wrote:
Hello,
I would like to use a printer on the server and share it like samba supports,
have it a shared network printer through openbsd server.
The printer is actually a usb one that I would like to connect to the server.
Is
to read the datasheet, and try to do
something to help those who
use the same hardware that I use.
thank a lot of your attention
--
Renato dos Santos
shazaum.wordpress.com
On 11 November 2010 21:18, Jacob Meuser jake...@sdf.lonestar.org
wrote
On Tue, Dec 14, 2010 at 03:39:23PM +0100, Dmitrij D. Czarkoff wrote:
Hello!
I have found my external microphone (mic2) not working under OpenBSD -current
of Nov 20. Whatever I do, I get mixerctl outputs.mic2_sense answering
outputs.mic2_sense=unplugged regardless of whether it is plugged
On Wed, Dec 15, 2010 at 10:06:57AM +0800, Aaron Lewis wrote:
how to know if a headphone jack is plugged in , anyone knows ?
-- Aaron
for azalia(4):
$ mixerctl | grep _sense
other drivers, I don't think any others have such a feature. maybe some
of the macppc audio devices ... some ac97
On Wed, Dec 08, 2010 at 01:40:20PM +, Jacob Meuser wrote:
mspdebug uses libusb, which means it uses ugen(4).
ls -l /dev/ugen*
oops, too quick. libusb also uses /dev/usb* to scan for devices.
On Wed, Dec 08, 2010 at 09:59:58AM +0100, Benjamin Nadland wrote:
I just got my TI MSP430
mspdebug uses libusb, which means it uses ugen(4).
ls -l /dev/ugen*
On Wed, Dec 08, 2010 at 09:59:58AM +0100, Benjamin Nadland wrote:
I just got my TI MSP430 Launchpad and saw that msp430-gcc and
mspdebug got imported into ports.
From the commit message: One will need an upcoming umodem.c
On Tue, Dec 07, 2010 at 10:39:23AM -0300, Gonzalo L. R. wrote:
Hi misc@,
I have a Dell Vostro 1510 with -current and my sound card it's not
supported,
Here is my dmesg and pcidump:
http://x61.com.ar/tmp/pcidump
http://x61.com.ar/tmp/dell.dmesg
I build the kernel with AZALIA_DEBUG
On Tue, Dec 07, 2010 at 05:40:39PM -0500, Dave Anderson wrote:
No doubt I've screwed something up, but I can't figure out what.
# echo $CVSROOT
anoncvs.comstyle.com:/cvs
^
# cvs -t -d$CVSROOT -q up -Pd
- main loop with CVSROOT=anoncvs.comstyle.com:/cvs
- Starting server: ssh
just curious, but why would you need to disable USB sometimes and
not always?
the answer is: you can't disable it in a running kernel. the OpenBSD
kernel doesn't use modules.
On Mon, Dec 06, 2010 at 03:13:42PM -0600, Orestes Leal R. wrote:
just disable when I need to, unloading modules, etc.
you're not even using the ohci (i.e. this is most likely bad/dying
hardware)
On Sat, Dec 04, 2010 at 11:55:49PM +0100, Mattieu Baptiste wrote:
Hi all,
I decided to upgrade my soekris net5501 (from a snapshot around
september 7) to -current. I had in the past random ohci scheduling
overruns,
On Wed, Dec 01, 2010 at 08:30:03PM +0100, Jiri B. wrote:
Hi,
on Lenovo T400 laptop there's internal mic (works on other OS).
Unfortunatelly I'm stupid or it doesn't work :/
I tried:
* aucat -o /tmp/file.wav
* aucat -C0:1 -o /tmp/file.wav
* aucat -C2:3 -o /tmp/file.wav
* audacity
On Sat, Nov 27, 2010 at 12:39:40PM +0330, Bahador NazariFard wrote:
Hi
I am using of OpenBSD 4.8 as a firewall box but it is started to annoy me
:((
My problem is OpenBSD crashes unexpectedly (specially when im not at my
desk)
How can I find the source of this problem.
On Sun, Nov 14, 2010 at 10:43:47AM +0400, OpenBSD Geek wrote:
Hi,
I read FAQ, and found nothing about install.site script.
the you must have missed section 4.14 -
http://www.openbsd.org/faq/faq4.html#site
--
jake...@sdf.lonestar.org
SDF Public Access UNIX System - http://sdf.lonestar.org
Santos
shazaum.wordpress.com
On 6 November 2010 20:59, Jacob Meuser jake...@sdf.lonestar.org wrote:
On Sat, Nov 06, 2010 at 03:39:00PM -0700, James Hozier wrote:
I am not sure what all this code means, but would you like me to test
stuff out?
If I'm supposed to do something
On Wed, Nov 10, 2010 at 01:14:19AM +0100, frantisek holop wrote:
hmm, on Tue, Nov 09, 2010 at 03:53:59PM -0500, Brynet said that
Why are you sending this crap here? the inclusion of binary
firmware/microcode in OpenBSD is considered acceptable so long as the
license allows for
On Tue, Nov 09, 2010 at 11:07:20PM -0500, Predrag Punosevac wrote:
I just installed swfdec-0.8.4 on 4.8 (i386) snapshot of 22nd of August
(should be epsilon close to release) and I do not see the plugin when
I type
about:plugins
nor in
/usr/local/mozilla-firefox/plugins
I do not
On Mon, Nov 08, 2010 at 06:55:59PM -0800, James Hozier wrote:
From: Fred Crowson fred.crow...@gmail.com
Subject: Re: How to test if
sound is working?
To: James Hozier guitars...@yahoo.com
Cc:
misc@openbsd.org
Date: Monday, November 8, 2010, 10:55 PM
On 8 November
2010 22:04, James
On Sun, Nov 07, 2010 at 04:18:34PM -0800, James Hozier wrote:
Oh, I've tried a lot of different combos
yesterday and this was one of them. Tried
both settings with my speakers, and
tried both settings with my headphones plugged
in.
it appears you don't get any sound because the outputs are
On Sat, Nov 06, 2010 at 10:48:52AM -0700, James Hozier wrote:
I've been trying to get my sound working and tried playing an audio file with
mplayer,
xmms, and vlc, and it seems like it's playing fine (I can even see the visual
bars
moving in xmms) but I get no sound at all with my speakers
On Sat, Nov 06, 2010 at 01:08:40PM -0700, James Hozier wrote:
From: Jacob Meuser jake...@sdf.lonestar.org
Subject: Re: How to test if sound is working?
To: misc@openbsd.org
Date: Saturday, November 6, 2010, 7:14 PM
On Sat, Nov 06, 2010 at 10:48:52AM
-0700, James Hozier wrote:
I've
On Wed, Nov 03, 2010 at 03:32:21PM -0200, Shazaum wrote:
a little test in freebsd 6.2 audio worked
going by what they kept in their current driver, and what alsa does,
perhaps this helps. probably doesn't fix the internal speaker, but
might get headphone output working.
--
On Sat, Nov 06, 2010 at 03:39:00PM -0700, James Hozier wrote:
I am not sure what all this code means, but would you like me to test stuff
out?
If I'm supposed to do something with this piece of code, you'll have to let
me know
what to do with it
no, that's specific code for that specific
fwiw, in -current, USB attach order should be quite predictable. there
are no longer multiple threads attaching USB devices. attachment is
now done in a single thread, and it is done in the same order every
time.
of course, if you change which USB ports the devices are connected to
between
On Sun, Oct 31, 2010 at 03:03:39PM +0100, Jan Stary wrote:
I use a m-audio mobilepre for recording and listening music;
it's class compliant does 16-bit stereo at 48kHz, and the
sound is excellent. It has a stereo preamp and a phantom
power, which is handy.
I have been using
On Sun, Oct 31, 2010 at 06:54:47PM -0200, Shazaum wrote:
--
Renato dos Santos
shazaum.wordpress.com
On 30 October 2010 16:07, Jacob Meuser jake...@sdf.lonestar.org wrote:
On Fri, Oct 29, 2010 at 09:53:33PM +, Jacob Meuser wrote:
On Fri, Oct 29, 2010 at 09:22:12AM -0200
On Fri, Oct 29, 2010 at 09:53:33PM +, Jacob Meuser wrote:
On Fri, Oct 29, 2010 at 09:22:12AM -0200, Shazaum wrote:
well, with Linux I have no problem ...
linux support for realtek codecs alone is 5x as large as our
driver for all of azalia. likely they have some quirk for
your
On Fri, Oct 29, 2010 at 09:22:12AM -0200, Shazaum wrote:
well, with Linux I have no problem ...
linux support for realtek codecs alone is 5x as large as our
driver for all of azalia. likely they have some quirk for
your specific bios/codec combo.
I have done all sorts of changes in controls,
your dac output are labeled 'inputs',
this is a great example of why only looking at 'outputs' is simply wrong.
--
Renato dos Santos
shazaum.wordpress.com
On 27 October 2010 14:33, Jacob Meuser jake...@sdf.lonestar.org wrote:
On Wed, Oct 27, 2010 at 01:20:20PM -0200, Shazaum
I would prefer to just see mixerctl -v output from -current GENERIC.
--
jake...@sdf.lonestar.org
SDF Public Access UNIX System - http://sdf.lonestar.org
On Thu, Oct 21, 2010 at 02:34:03PM -0500, Carson Chittom wrote:
On Thu, Oct 21, 2010 at 01:20:40PM -0500, Jay K wrote:
1) There should be a way to repeat all these messages for all installed
packages.
Maybe there already is.
$ less /var/db/pkg/*/+DISPLAY
pkg_info -M is nicer
--
On Sat, Oct 16, 2010 at 05:46:24PM +0200, Jan Stary wrote:
(I have changed the subject,
because the subject has changed.)
On Oct 14 01:59:39, Jacob Meuser wrote:
On Thu, Oct 14, 2010 at 12:05:09AM +, Jacob Meuser wrote:
On Thu, Oct 14, 2010 at 12:59:37AM +0200, Jan Stary wrote
On Sat, Oct 16, 2010 at 12:52:17PM +0200, Jan Stary wrote:
but the sizes are still not recognized:
h...@mac:hans$ video -v
video device /dev/video:
encodings: uyvy
sizes: 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0
controls: brightness,
On Fri, Oct 15, 2010 at 02:24:27PM +0200, Jan Stary wrote:
On Oct 14 01:59:39, Jacob Meuser wrote:
On Thu, Oct 14, 2010 at 12:05:09AM +, Jacob Meuser wrote:
On Thu, Oct 14, 2010 at 12:59:37AM +0200, Jan Stary wrote:
On Oct 13 22:07:27, Jacob Meuser wrote:
On Wed, Oct 13, 2010
On Fri, Oct 15, 2010 at 11:39:20PM +0200, Dmitrij Czarkoff wrote:
2010/10/9 PPP8QQP8P9 PP0QQ P:PP2 czark...@gmail.com:
Sorry, the last dmesg was of 05-Oct-10 snapshot, not of 4.7.
As of 14-Oct-10 snapshot issue is still there.
trying to figure out how to sanely track usb transfers to see
On Wed, Oct 13, 2010 at 10:56:24AM +0200, ??? ??? wrote:
Under 05-Oct-2010 snapshot:
1. Plug in urtw device (I have a LevelOne device, don't know model as
its plastic body is lost).
2. Start bittorrent client (or ftp or whatever loading urtw device).
3. Plug in any usb device -
On Wed, Oct 13, 2010 at 09:32:59PM +0200, ??? ??? wrote:
On Wed, Oct 13, 2010 at 12:49 PM, Jacob Meuser jake...@sdf.lonestar.org
wrote:
On Wed, Oct 13, 2010 at 10:56:24AM +0200, ??? ??? wrote:
Under 05-Oct-2010 snapshot:
1. Plug in urtw device (I have a LevelOne device
On Wed, Oct 13, 2010 at 11:51:47PM +0200, Jan Stary wrote:
This is a fresh upgrade of current/amd64 on a Macbook3,1.
Basically, everything works except the wifi and uvideo.
I installed the uvideo firmware as documented in uvideo(4).
I can capture an image with 'fswebcam image.jpg';
I have
On Thu, Oct 14, 2010 at 12:33:34AM +0200, ??? ??? wrote:
On Thu, Oct 14, 2010 at 12:01 AM, Jacob Meuser jake...@sdf.lonestar.org
wrote:
On Wed, Oct 13, 2010 at 09:32:59PM +0200, ??? ??? wrote:
% ps -akx | grep usb
B B 8 ?? B DK B B B 0:00.26 (usbtask)
24889 p1 B S+ B
On Thu, Oct 14, 2010 at 12:59:37AM +0200, Jan Stary wrote:
On Oct 13 22:07:27, Jacob Meuser wrote:
On Wed, Oct 13, 2010 at 11:51:47PM +0200, Jan Stary wrote:
This is a fresh upgrade of current/amd64 on a Macbook3,1.
Basically, everything works except the wifi and uvideo.
I installed
On Thu, Oct 14, 2010 at 12:05:09AM +, Jacob Meuser wrote:
On Thu, Oct 14, 2010 at 12:59:37AM +0200, Jan Stary wrote:
On Oct 13 22:07:27, Jacob Meuser wrote:
On Wed, Oct 13, 2010 at 11:51:47PM +0200, Jan Stary wrote:
This is a fresh upgrade of current/amd64 on a Macbook3,1
On Wed, Oct 13, 2010 at 02:18:27AM +, Mikle Krutov wrote:
Hello, list!
While reading the man page of MPlayer, i've noticed lots of headers of
it. That is kind of wrong. Version of MPlayer package is
mplayer-20090708p4-sdl
With headers i mean:
The MPlayer Project 2009-03-25
On Fri, Oct 08, 2010 at 06:22:25PM +0200, Dmitrij D. Czarkoff wrote:
Hello, everyone!
After some investigation about 05-Oct-10 snapshot's hang on Acer Aspire One
531h I got that Intel Link 5150 card containing both WiFi and WiMax devices
causes that.
So, I've tried to boot two different
On Wed, Oct 06, 2010 at 09:16:01AM +0530, Siju George wrote:
$ mixerctl -av
outputs.dig-dac-0:1_sou=hdaudio [ hdaudio adc-0:1 ]
inputs.dac-0:1_mute=off [ off on ]
inputs.dac-0:1=248,248
inputs.dac-2:3_mute=off [ off on ]
inputs.dac-2:3=248,248
inputs.dac-4:5_mute=off [ off on ]
kaffeine uses libcdio, which I don't think has ever worked quite
right on OpenBSD. kaffeine crashes for me on amd64 when I try to
play an audio CD. kscd tries to use '/dev/cdrom' by default, which
is totally bogus.
use cdio(1)'s 'cdplay' command to play audio CDs. cdio(1) is in
base. it
On Thu, Sep 16, 2010 at 02:17:36AM -0400, Joe Gidi wrote:
I'm getting frequent popping sounds from the azalia device on my system,
roughly every 15-30 seconds. I have a pair of stereo speakers plugged in
to the green speaker jack, and the pops always seem to alternate channels
(one on the
On Mon, Sep 13, 2010 at 12:51:29AM -0400, Predrag Punosevac wrote:
Elmar Bschorer elmar.bschorer () bugconsulting ! de wrote:
hi list,
i tried to get skype up and running with linux emulation on openbsd 4.7.
skype starts up and i can log in but i can't see any contacts or chat
with others.
On Fri, Sep 03, 2010 at 11:26:01PM -0700, Aaron Stellman wrote:
Hello,
Having some issues with azalia(4) in a thinkpad T61, and perhaps aucat
may have something to do with it too.
Very simple setup, listening to mpd playing audio streams from another
mpd running on another machine. Sound
On Sat, Sep 04, 2010 at 07:39:27AM +, Jacob Meuser wrote:
On Fri, Sep 03, 2010 at 11:26:01PM -0700, Aaron Stellman wrote:
Hello,
Having some issues with azalia(4) in a thinkpad T61, and perhaps aucat
may have something to do with it too.
Very simple setup, listening to mpd playing
On Mon, Aug 23, 2010 at 05:39:49PM -0700, Barry Grumbine wrote:
When using qemu, /dev/tunX interfaces are being created with the wrong
permissions. It's not a /dev/MAKEDEV problem
# cd /dev ./MAKEDEV tun4
works just peachy. The problem is when /dev/tunX is created on the fly.
...Are
On Wed, Aug 18, 2010 at 04:28:57PM +0300, Mihai Popescu B.S. wrote:
Hello,
My post was not intended as a direct hit for the article. I told my
opinion to misc@ because undeadly ask for subscription, no more
anonymous coward post. Am I wrong ?
I target airport behaviour with my comment. I
On Wed, Aug 18, 2010 at 04:39:30PM -0400, Tony Abernethy wrote:
Personally, I liked the article.
Small change in perspective changes an ordeal into an adventure.
Jacob Meuser wrote:
On Wed, Aug 18, 2010 at 04:28:57PM +0300, Mihai Popescu B.S. wrote:
Hello,
My post was not intended
On Tue, Aug 17, 2010 at 10:12:50AM +0530, Siju George wrote:
On Sun, Aug 15, 2010 at 11:48 PM, Frank Bax f...@sympatico.ca wrote:
Siju George wrote:
On Sat, Aug 14, 2010 at 6:08 PM, Stuart Henderson s...@spacehopper.org
wrote:
On 2010-08-14, Sevan / Venture37 ventur...@gmail.com
On Sat, Aug 14, 2010 at 07:08:18PM +0100, Stuart Henderson wrote:
On 2010/08/14 19:18, Siju George wrote:
On Sat, Aug 14, 2010 at 6:08 PM, Stuart Henderson s...@spacehopper.org
wrote:
On 2010-08-14, Sevan / Venture37 ventur...@gmail.com wrote:
On 14 August 2010 10:46, Stuart Henderson
On Mon, Aug 09, 2010 at 09:28:34PM -0700, Luis Cortes wrote:
Hello,
I've got -current running on a Toshiba Tecra M10-S3454 laptop.
Everything seems to be working ok. However, I've got no audio and I
really would like to get this working.
I also noticed the patch that was provided earlier
On Tue, Aug 10, 2010 at 04:03:24PM +0300, Oleksii Zhmyrov wrote:
Hi, misc@
I'm trying to run -current (20100809) on HP 2133 MiniNote laptop.
It seems to me strange that sound card AD1984A on VIA VT8237S
HDA controller doesn't appear in dmesg at all.
your problem is that the controller,
On Tue, Aug 10, 2010 at 07:05:55PM +0200, Tomas Vavrys wrote:
You can officially call OpenBSD world first UNIX-like OS which fully
support Thinkpad SL510. Everything works fine (suspend/resume, Fn
keys), only external mute sound/microphone keys next to the keyboard
don't work properly.
that
On Tue, Aug 10, 2010 at 09:09:58AM +, Jacob Meuser wrote:
On Mon, Aug 09, 2010 at 09:28:34PM -0700, Luis Cortes wrote:
azalia0 at pci0 dev 27 function 0 Intel 82801I HD Audio rev 0x03:
apic 1 int 22 (irq 255)
azalia0: invalid CORBSZCAP: 0x 0
azalia0: initialization failure, detaching
man pckbc, second paragraph of DESCRIPTION
On Thu, Aug 05, 2010 at 12:35:38PM +0200, Jasper Valentijn wrote:
Hi list,
When the machine is booted without an external ps2 keyboard connected
the built-in keyboard and pointer won't work.
Built-in keyboard works at bootloader and UKC, not after
On Mon, Aug 02, 2010 at 02:10:56PM +0200, Remco wrote:
I was looking at the Alesis iO|2 USB audio interface. It seems like a nice
device, especially since it appears to comply to both the USB-audio as well
as the USB-MIDI standard, see:
http://www.linuxquestions.org/
and/or echos?
--
jake...@sdf.lonestar.org
SDF Public Access UNIX System - http://sdf.lonestar.org
/*
* Copyright (c) 2010 Jacob Meuser jake...@openbsd.org
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
On Wed, Jul 21, 2010 at 03:10:45PM +0400, Dmitrij D. Czarkoff wrote:
Jacob Meuser jake...@sdf.lonestar.org wrote:
can you try running the following? save it to a file, let's call
it audrops.c then build it with 'make LDFLAGS=-lm audrops'.
let that run for a while, at least as long
On Wed, Jul 21, 2010 at 04:11:07PM +0400, Dmitrij D. Czarkoff wrote:
Jacob Meuser jake...@sdf.lonestar.org wrote:
you're saying the volume made a difference in how often there were
underruns? that is quite odd. hmmm.
Well I'm saying that I had less underruns while being at 150/255
On Mon, Jul 19, 2010 at 08:54:26AM +0200, Jona Joachim wrote:
Hi,
I have a Logitech C200 webcam which includes a uvideo and a uaudio
device for voice recording.
The video part works correctly and is usable, however uaudio is not so
happy, it complains in dmesg and no audio(4) device is
On Mon, Jul 19, 2010 at 09:23:49AM +0200, Remco wrote:
Jona Joachim wrote:
Hi,
I have a Logitech C200 webcam which includes a uvideo and a uaudio
device for voice recording.
The video part works correctly and is usable, however uaudio is not so
happy, it complains in dmesg and no
On Tue, Jul 13, 2010 at 08:55:03AM +0200, Jan Stary wrote:
On Feb 21 14:04:01, Alexandre Ratchov wrote:
On Sun, Feb 21, 2010 at 12:29:15AM +0100, Jan Stary wrote:
can people recommend a good uaudio card?
It depends on what you want to use it for.
I use a m-audio mobilepre for
On Tue, Jul 13, 2010 at 09:10:35AM +0200, Jan Stary wrote:
On Feb 21 14:04:01, Alexandre Ratchov wrote:
On Sun, Feb 21, 2010 at 12:29:15AM +0100, Jan Stary wrote:
More generally, what is the status of uaudio(4)?
It works reliably, 24-bit encodings are not supported
though;
On Tue, Jul 13, 2010 at 11:38:11AM +0200, pet...@schwertfisch.de wrote:
Jacob Meuser jake...@sdf.lonestar.org wrote:
On Tue, Jul 13, 2010 at 09:10:35AM +0200, Jan Stary wrote:
On Feb 21 14:04:01, Alexandre Ratchov wrote:
On Sun, Feb 21, 2010 at 12:29:15AM +0100, Jan Stary wrote
On Tue, Jul 13, 2010 at 05:55:21PM +0200, pet...@schwertfisch.de wrote:
Jacob Meuser jake...@sdf.lonestar.org wrote:
E-Mu 0202 USB. it was a gift from patrick keshishian (thanks!).
it's also a USB 2.0 device, so there's also USB 2.0 support for uaudio
in that patchset. the 0202 also
On Sun, Jul 04, 2010 at 01:25:11PM -0400, bofh wrote:
One interesting thing I have noticed about some Americans is the need
to expose their opinions, no matter how right or wrong, *or
unnecessary*
They honestly believe their opinions are of value and everyone should
listen to them, without
On Fri, Jun 25, 2010 at 10:12:03PM +0200, Adam Borbely wrote:
Starting program: /usr/local/bin/mplayer -monitoraspect 16:10 -xy 2
-fstype none -zoom -vo x11 tv:// -tv driver=bsdbt848:freq=224.25
Breakpoint 1 at 0xe40da4c: file /usr/src/lib/libsndio/sndio.c, line 292.
MPlayer
1 - 100 of 644 matches
Mail list logo
