On Mon, Aug 02, 2021 at 06:38:32PM +0200, Jan Stary wrote:
>Hello,
>
>playing with ntpd a bit, I am looking for a working
>nmea or udcf sensor. Can people please recommend
>an easy to use device known to work?
I use a Garmin GPS 18x with ntpd. Works fine, just make sure you flash
it with the
On Tue, Apr 03, 2018 at 11:37:25PM +1000, Jonathan Gray wrote:
>On Tue, Apr 03, 2018 at 01:36:57PM +0200, Maurice Janssen wrote:
>> Hi,
>>
>> I just installed 6.3 and it seems to work great.
>> I've a question about the microcode. Is there a way to check whet
Hi,
I just installed 6.3 and it seems to work great.
I've a question about the microcode. Is there a way to check whether an
updated microcode was installed? I have an i5 Ivybridge CPU and the
Intel microcode is in /etc/firmware/intel, but I don't see anything in
dmesg about it.
Thanks in
No problems with Android 5.0.2.
-Original Message-
From: Justin Mayes <jma...@careered.com>
To: Raul Miller <rauldmil...@gmail.com>, Maurice Janssen <maur...@z74.net>
Cc: Steve Clement <st...@localhost.lu>, OpenBSD general usage list
<misc@openbsd.org>
On Mon, Jul 25, 2016 at 11:13:48PM +0200, Steve Clement wrote:
>Your link talks more about 6.0
>
>But this is probably it:
>https://code.google.com/p/android/issues/detail?id=196939
Yeah, that's the link I wanted to send. Somehow I managed to copy
the wrong link in my previous email.
Maurice
On Mon, Jul 25, 2016 at 04:54:09PM +0200, Steve Clement wrote:
>I tried to connect my Nexus 5 with Android 6.0.1 but that plainly failed, no
>clue what the correct config should be, so I haven???t reproduced it under the
>Droid.
There seems to be an issue with Android 6.0.1 and L2TP/IPSEC
On 05/29/16 21:53, Maurice Janssen wrote:
Hi,
I'm trying to replace a PC Engines Alix board with an APU 2c4 board,
but I'm having some issues to get it up and running.
I have a fiber connection and my ISP requires a PPPoE connection over
VLAN 6.
With the old setup, this works like a charm
Hi,
I'm trying to replace a PC Engines Alix board with an APU 2c4 board, but
I'm having some issues to get it up and running.
I have a fiber connection and my ISP requires a PPPoE connection over
VLAN 6.
With the old setup, this works like a charm.
With the new setup, I can't get the PPPoE
On Sat, Dec 12, 2015 at 09:54:39AM +, Craig Skinner wrote:
>On 2015-12-07 Mon 21:30 PM |, Jordon wrote:
>> I recently picked up a few PCI serial port cards from the junk pile at
>> work. My intent is to put one in my soon-to-be-retired Soekris net5501
>> and install OpenBSD on it to turn it
On Tue, Nov 10, 2015 at 10:47:24AM +0100, Stefan Sperling wrote:
>We need a dmesg from both of you.
OpenBSD 5.8 (GENERIC.MP) #1: Wed Oct 14 19:38:08 CEST 2015
jas...@stable-58-amd64.mtier.org:/binpatchng/work-binpatch58-amd64/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4160245760
Paco Willers schreef op 2015-11-10 07:53:
Hi,
When using a PS/2 mouse everything worked fine. I swapped it for a USB
mouse, but this mouse isn't always detected while booting my
(386-based)
OpenBSD 5.8-stable system. Replugging the mouse when the system is
running
usually solves the problem:
On Thu, Jul 16, 2015 at 08:25:20PM +0200, Francois Pussault wrote:
What are the minimum requirements for a decent SPARC machine? I mean
by that a machine who is able to run OpenBSD as a desktop.
...
for cheaper price :
Maybe somme v4xx or v2xx should be a good choice for budget...like v490
On 01/13/15 19:54, Christian Weisgerber wrote:
On 2015-01-13, Stuart Henderson s...@spacehopper.org wrote:
2x e-08 (esxi)
Oooh, interesting. I hadn't considered VMs that actually keep time.
4.560218e-09 (VM at Transip.nl, don't know what kind of host OS they use)
Maurice
Hi,
I just upgraded my nameserver to 5.6-stable and noticed the following
line in /etc/rc.conf:
nsd_flags=NO# for normal use: -c /var/nsd/etc/nsd.conf
However, /etc/rc.d/nsd contains the following line:
daemon_flags=-c /var/nsd/etc/nsd.conf
I suppose the comment in rc.conf
skin...@britvault.co.uk schreef op 2014-06-20 16:08:
Works for me, apart from last 2, but the card isn't listed as
supported.
/etc/remote:
snip
# FIXME No. 9 Moxa card port:
moxa09:dv=/dev/tty10:common:
# FIXME No. 10 Moxa card port:
moxa10:dv=/dev/tty11:common:
Try /dev/tty0a and
On 03/30/14 22:47, Maurice Janssen wrote:
Hi,
I have two SunFire V210 machines to offer to any developer (preferably in
Europe) that can use such a machine for OpenBSD development.
Both are dual CPU 1.0 GHz with 2 GB RAM.
Just contact me off list please.
Maurice
I've had a couple replies
Hi,
I have two SunFire V210 machines to offer to any developer (preferably in
Europe) that can use such a machine for OpenBSD development.
Both are dual CPU 1.0 GHz with 2 GB RAM.
Just contact me off list please.
Maurice
On 12/11/13 21:06, Alexander Hall wrote:
On 12/10/13 21:38, Maurice Janssen wrote:
How about this (and of course remove the spamd-setup bits from /etc/rc):
--- spamd.orig Tue Dec 10 21:24:48 2013
+++ spamd Tue Dec 10 21:24:14 2013
@@ -15,4 +15,12 @@
return 0
}
+rc_start
On 12/10/13 14:03, Craig R. Skinner wrote:
On 2013-12-10 Tue 09:26 AM |, Alexander Hall wrote:
The OP is referring to this part of /etc/rc, which has nothing to do
with neither crontab nor /etc/rc.d/*.
if [ X${spamd_flags} != XNO ]; then
/usr/libexec/spamd-setup -D
fi
Indeed, please
On 12/09/13 08:41, Jason McIntyre wrote:
On Sun, Dec 08, 2013 at 07:59:48PM +0100, Maurice Janssen wrote:
Hi,
If I understand the man pages correctly, you should start both spamd and
spamd-setup with the -b option when you want to use spamd in blacklist only
mode.
In /etc/rc.d/spamd, the -b
Hi,
If I understand the man pages correctly, you should start both spamd and
spamd-setup with the -b option when you want to use spamd in blacklist
only mode.
In /etc/rc.d/spamd, the -b option is set when you have spamd_black=yes
in your rc.conf.local.
However, spamd-setup is always started
Hi,
I noticed a new patch for pflow(4) in 5.3-stable in 5.4-stable.
However, these are not yet in the -stable branch in CVS.
I hope someone will commit them. Thanks.
Maurice
Hi,
I'm seeing some behaviour with traceroute6 that I can't explain.
I have a small home network with a router/firewall running OpenBSD
5.3-stable. I use pppoe(4) on the WAN interface for IPv4 connectivity.
For IPv6, I have a gif tunnel from Sixxs.
The gif tunnel has the address
On 08/09/13 17:05, Francisco Valladolid H. wrote:
Hi folks.
Currently I have a Wireless network serving in my town using a small
form factor (mini-itx) PC with OpenBSD for pf,squid, and dns cache.
I need recommendations for a network appliance in rack mode with flash
storage and five rj45
Hi,
A few months ago a bug was fixed in src/usr.sbin/tftpd/tftpd.c
This was also applied to 5.2-stable, but it looks to me that the bug is
still present in 5.3-stable.
Also in Perl, CVE-2013-1667 was fixed in -current and 5.2-stable, not in
5.3-stable.
Would it be possible to get these
On Mon, May 13, 2013 at 09:15:17PM -0700, Marco S Hyman wrote:
This is probably something stupid I'm doing, but I can't see it right this
second.
Trying to build xenocara from sources pulled from
anon...@anoncvs3.usa.openbsd.org:/cvs
as of about 60 minutes before sending this email message gives
Hi,
There is an errata for 5.3 on http://www.openbsd.org/errata53.html which
is not in the OPENBSD_5_3 branch in CVS.
I'd like to build releases for 5.3-stable as soon as possible after 5.3
is released and I'd rather use CVS to keep my source tree up to date
than applying patches by hand.
On Thu, Mar 21, 2013 at 12:23:18PM +0100, Paul de Weerd wrote:
For the sendmail heroes out there... Let's say I have the following
in DNS:
$ORIGIN example.com.
@ IN MX 10 mx1
@ IN A 192.0.2.1
@ IN 2001:db8::1
mx1IN A 192.0.2.2
The latest patches on the errata-page for 5.2 and 5.3 are not yet in
the stable tree. Is this correct?
Also the Perl patch from about a week ago is only back ported to 5.2-stable.
Shouldn't these be also in 5.1-stable and 5.3-stable?
Thanks,
Maurice
On Fri, Nov 16, 2012 at 11:33:28AM +0100, Pierre-Emmanuel Andr? wrote:
At work, i'm using a bytemine appliance:
http://blog.bytemine.net/2012/08/15/bytemine-appliance-6a16e/
https://shop.bytemine.net/startseitenprodukte/bytemine-appliance-6a16e.html
Works very fine.
Does anyone know the
On Thu, Oct 11, 2012 at 10:38:04AM +0200, Bernd wrote:
Hi,
I've got to port some shell scripts which rely on env vars. One
amongst those is $SSH_CLIENT.
On OpenBSD 5.1 machines, I don't get what I'd assume to get:
# echo $SSH_CLIENT
It returns just a blank line.
I re-tested this on an older
On 08/21/2012 10:15 AM, lilit-aibolit wrote:
On 08/20/2012 09:49 PM, Maurice Janssen wrote:
On 08/20/2012 04:43 PM, lilit-aibolit wrote:
I have internal ftp-server.
To give access for it from Internet I use ftp-proxy:
ftpproxy_flags=-R ftp_server -p 21 -b ext_ip
and rules:
anchor ftp-proxy
On 08/20/2012 04:43 PM, lilit-aibolit wrote:
I have internal ftp-server.
To give access for it from Internet I use ftp-proxy:
ftpproxy_flags=-R ftp_server -p 21 -b ext_ip
and rules:
anchor ftp-proxy/*
pass in on $ext_if inet proto tcp from any to (em1) port ftp
pass out on $int_if inet proto
On 05/25/2012 09:00 PM, Sebastian Benoit wrote:
1. run nsd on 127.0.0.1 (or some other ip != your unbound ip)
2. tell unbound where to ask for your local domain example.com:
stub-zone:
name: example.com
stub-addr: 127.0.0.1
If you run nsd on localhost, remember to set
On 05/07/2012 08:45 AM, Matthieu Herrb wrote:
On Sun, May 06, 2012 at 09:57:21PM +0200, Maurice Janssen wrote:
Hi,
I'm having some trouble building xenocara on a Vaxstation running
5.1-stable.
The xenocare source directory is mounted over NFS, in case it matters.
The sources are a clean
Hi,
I'm having some trouble building xenocara on a Vaxstation running
5.1-stable.
The xenocare source directory is mounted over NFS, in case it matters.
The sources are a clean anoncvs checkout and also used by some other
platforms (without any problems), so I am pretty sure the tree is OK.
I
On 11/10/2011 09:13 PM, Maurice Janssen wrote:
On 11/10/2011 10:51 AM, Matthieu Herrb wrote:
On Wed, Nov 9, 2011 at 7:02 PM, Maurice Janssenmaur...@z74.net wrote:
Hi,
I'm having some trouble doing a build of xenocara on a vaxstation under
5.0-stable.
I know it's not needed because
On 11/10/2011 10:51 AM, Matthieu Herrb wrote:
On Wed, Nov 9, 2011 at 7:02 PM, Maurice Janssenmaur...@z74.net wrote:
Hi,
I'm having some trouble doing a build of xenocara on a vaxstation under
5.0-stable.
I know it's not needed because there are no patches for xenocara yet for
5.0-stable, but
Hi,
I'm having some trouble doing a build of xenocara on a vaxstation under
5.0-stable.
I know it's not needed because there are no patches for xenocara yet for
5.0-stable, but it bugs me that the build fails consistently.
My setup:
- An OpenBSD NFS server with the src and xenocara source tree
-
Op Wo, 19 oktober, 2011 11:41, schreef Paul de Weerd:
So .. what is the fundamental difference from a 'real' UPS that can
signal the machine itself that power is going down ? You get to do
the same steps in case power is restored while we're going down.
The difference is that a smart UPS can
On 08/13/2011 06:58 AM, Hugo Osvaldo Barrera wrote:
On most PCs I've handled, I change across consoles using alt+ctrl+f2,
alt+ctrl+f3, etc.
I've now installed OpenBSD on an iBook G4, which doesn't quite have
f1-f12 keys.
It has a brightness-up key, and if I press fn+brightness_up, it works
On 08/01/2011 01:47 PM, Daniel Gracia wrote:
Known facts:
* uticom is awful unstable.
* uftdi is unstable.
New facts:
I have got from friday an uplcom quad-port adapter that looks quite
stable; as today, I haven't got a single freeze (still testing).
FWIW: I've used a uplcom adapter for a
MG wrote:
Forgive my ignorance, but does this mean that if I were to install
OpenBSD 4.9 via FTP today, there shouldn't be random IPsec disconnects
as described in bug PR6601? Thanks.
The file sets on ftp.openbsd.org/pub/OpenBSD/4.9/ (and of course on all
official mirrors) are 4.9-release
Hi,
Is it possible to somehow force a program to run on a single CPU in an
SMP system?
The reason I ask that on some SMP-capable architectures, I'm having some
problems with ntpd. On hppa and sgi, the clock won't sync because ntpd
sees replies with negative delay:
Jul 9 08:58:19 hppa
On Sat, Jul 09, 2011 at 07:52:58AM -0400, Nick Holland wrote:
On 07/09/11 03:57, Maurice Janssen wrote:
Hi,
Is it possible to somehow force a program to run on a single CPU in an
SMP system?
The reason I ask that on some SMP-capable architectures, I'm having some
problems with ntpd
Hi,
I noticed something strange while building xenocara on 4.9-stable on
an hppa-system.
One of the files in the xbase49.tgz file set (from 4.9-release) is
/usr/X11R6/lib/libfontconfig.so.7.0.
After 'make build', there's a libfontconfig.so.5.4 in /usr/X11R6/lib/
that is identical to the 7.0 file
Maurice Janssen wrote:
Hi,
I noticed something strange while building xenocara on 4.9-stable on
an hppa-system.
One of the files in the xbase49.tgz file set (from 4.9-release) is
/usr/X11R6/lib/libfontconfig.so.7.0.
After 'make build', there's a libfontconfig.so.5.4 in /usr/X11R6/lib
mailbox wrote:
Are there considerations to push the very few changes marked as 'Security
Fixes'
into the 'Release' branch between releases?
So that a 'Release' user could do a pgk_add -u fixed.tgz to get the fixed
version
of the package.
This would benefit users who like to have the 2 or 3
On Wed, Feb 16, 2011 at 04:27:27AM -0800, m wrote:
Hi again,
could someone please tell me how it's possible for a rule to match wrong dst
address? Under what circumstances woult it match in that way? Do I have to
rewrite all IPRange rules?
This is fixed in -current:
Hi,
On vax/4.8-stable, make release in /usr/xenocara fails with
+ install -c -o root -g wheel -m 644 /usr/xenocara/etc/X11.vax/xorg.conf
/usr/dest/etc/X11
install: /usr/xenocara/etc/X11.vax/xorg.conf: No such file or directory
*** Error code 71
Stop in /usr/xenocara (line 97 of Makefile).
Philip Guenther wrote:
On Sat, Oct 30, 2010 at 10:34 AM, Maurice Janssen maur...@z74.net wrote:
A few days ago, I extracted the src.tar.gz from the 4.8 CDROM and
synchronized the src tree to -stable through CVS. I expected to see
about 5 files being changed, but to my surprise a lot (all
Hi,
A few days ago, I extracted the src.tar.gz from the 4.8 CDROM and
synchronized the src tree to -stable through CVS. I expected to see
about 5 files being changed, but to my surprise a lot (all?) files in
src/gnu/usr.bin/perl/ were also updated.
This seems weird, because as far as I know, no
On Fri, Sep 17, 2010 at 08:25:00AM -0300, Hugo Osvaldo Barrera wrote:
I wanted to know if the Adaptec Quartet64 ANA-62044 was supported on
OpenBSD, and started to google around, only to find that the *spanish* list
of supported hardware has a greater level of detail when compared to the
english
Siju George wrote:
Hi,
Is there anything I can use in place of MATLAB on OpenBSD?
http://www.mathworks.com/products/matlab/
even at least through Linux emulation?
Looking for a free Alternative :-)
Octave might be an alternative:
http://www.gnu.org/software/octave/
Maurice
Hi,
I just built a new kernel and a new release for 4.7-stable, because of
the patch in the OPENBSD_4_7 tree.
I noticed that the release process builds a new bsd and bsd.mp kernel,
but the bsd.rd ramdisk kernel is identical to the old ramdisk kernel
from when the first release was built on
On Mon, Mar 22, 2010 at 01:36:45PM +0200, Andreas Gerdd wrote:
Hi,
I've an OpenBSD 4.6-Stable system. I wanted to ask how long will
OBSD4.6 has patch/update support?
If there is a support time limit like lets say up to 12/24 months,
does it mean after that time, it will not get any update, not
On Thu, Mar 11, 2010 at 04:08:10PM +0200, Ozgur Kazancci wrote:
When apachectl issuing a restart, it sends a SIGHUP signal to httpd,
and when httpd receives this signal, it doesn't exit from its chroot.
So, apachectl restart becomes unfunctional when you have external
modules via LoadModule in
On Tue, Nov 24, 2009 at 05:08:06PM +0400, open...@e-solutions.re wrote:
Hello
i added theses lines :
pass in on $int_if inet proto { tcp, udp } from any to $gw_obsd port 67
pass in on $int_if inet proto { tcp, udp } from any to $gw_obsd port 68
my dhcpd.conf is a standard config...
my
On Thu, Nov 19, 2009 at 10:35:35AM -0300, Hugo Osvaldo Barrera wrote:
I'd very much like to help translate, specially the FAQ and the website.
However, should this be discussed in misc@ or www@ ?
Please read http://www.OpenBSD.org/translation.html and contact one
of the coordinators.
Maurice
Lars Nooden wrote:
Ingo Schwarze wrote:
When not only tracking -current, but even building the system from source,
consider following source-changes@, or you will from time to time miss
minor flag days.
Ok. Taken care of.
Is there a message header or string in the body that can be used to
On Wed, Nov 04, 2009 at 10:26:50AM -0500, Luis Useche wrote:
OK. Sorry for the noise. In any case, this change is in the 4.6
changelog (twice, http://www.openbsd.org/plus46.html):
Added dynamic buffer cache sizing. The sysctl kern.bufcachepercent
will allow you to specify a high-water mark above
Miod Vallat wrote:
Maurice Janssen wrote:
Hi,
I'm trying to build the file sets for 4.6-stable on an O2 machine, but it
keeps failing with the following error:
In file included from mips64/cpu.h:358,
from machine/cpu.h:5,
from mips64/param.h:44
Maurice Janssen wrote:
Hi,
I'm trying to build the file sets for 4.6-stable on an O2 machine, but
it keeps failing with the following error:
In file included from mips64/cpu.h:358,
from machine/cpu.h:5,
from mips64/param.h:44,
from machine
Hi,
I'm trying to build the file sets for 4.6-stable on an O2 machine, but
it keeps failing with the following error:
In file included from mips64/cpu.h:358,
from machine/cpu.h:5,
from mips64/param.h:44,
from machine/param.h:42,
Miod Vallat wrote:
Hi,
I'm trying to build the file sets for 4.6-stable on an O2 machine, but it
keeps failing with the following error:
That's odd. What is the revision number of sys/sched.h in your source
tree?
It's 1.22
Maurice
Jan Stary wrote:
would you please share the RELEVANT PORTION OF YOUR DMESG for the card (and
your opinions if you'd like)? I'm particularly interested in what's
reported for x-sector PIO and related.
It might be a bit late, but ...
$ dmesg | grep wd
wd0 at pciide0 channel 0 drive 0: CF 4GB
Bob Beck wrote:
Once you have a built release you can run upgrades everywhere from
that release tarball.
man release
to figure out how to do that.
Now you may ask, why don't we do that? We simply do not have the
resources and time to
devote racks of machines, developer time, and internet
Toni Mueller wrote:
Hi,
On Fri, 11.09.2009 at 22:28:43 +0200, Maurice Janssen maur...@z74.net wrote:
Will the master shutdown normally, or will it stall while trying to
umount the NFS share? The slaves will shutdown first, so when the
master goes down, the NFS server won't be responding
Mauro Rezzonico wrote:
Why don't ask the NSF server to do a 'shutdown +5' and the others to do
a 'shutdown now'? (see shutdown(8)
http://www.openbsd.org/cgi-bin/man.cgi?query=shutdown)
The NFS-server is an embedded device (Netgear NAS). Unfortunately I
can't set the +5 on the shutdown
Hi,
I have a few systems that are powered by the same UPS. All of them are
running nut; one system is connected to the UPS over the serial port
(the 'master'), the others are talking over the network to the master
(the 'slaves').
One of the slaves is acting as an NFS server and the master
Siju George wrote:
Do you have plans to introduce binary updates for OpenBSD so that
hours are not spent on compile time?.
A few years ago I started to create file sets of the -stable tree. See
http://www.z74.net/openbsd.html for more information.
It's far from perfect, but perhaps it's
Robert wrote:
Short followup:
Theo has commited an identical diff to -current.
Looking at the cvs tags for update.c rev 1.7,
this patch applies to 4.6, 4.5, 4.4 and 4.3.
I noticed that there's a patch for 4.4 , 4.5 and 4.6 on the FTP-servers,
but a checkout of the -stable tree still gives
On Tue, Jul 07, 2009 at 03:16:17PM -0600, Anathae Townsend wrote:
I am currently trying to open up a few ports on my firewall to allow an
internal
windows home server to provide services to the outside world.
My OpenBSD version is OpenBSD 4.5-current (GENERIC) #6: Sat May 16 21:50:41
MDT 2009
I
On Fri, Jul 03, 2009 at 02:18:40AM -0700, Manuel Ravasio wrote:
I'm still missing a point: how do I map more than 1 IP address on a single
physical interface?
Is there something like Linux' and Solaris'
ifconfig [interface]:1 blah blah blah
?
http://www.OpenBSD.org/faq/faq6.html#Setup.aliases
On Wed, Jun 10, 2009 at 12:57:40PM +0300, Thanasis wrote:
I don't know if that matters, but let me add that the connection between
the sparc machine's port and the ups' port consists of two cables and a
gender changer in between, like so:
On the sun's port side the plug is a DB25 and the other end
Thanasis wrote:
Is there a port of the apcupsd or any other daemon for ups on openbsd?
Nut seems to work fine for me. It's in ports and available as package.
Maurice
On Tue, May 26, 2009 at 08:50:32PM +, Stuart Henderson wrote:
On 2009-05-25, Maurice Janssen maur...@z74.net wrote:
I have an FTP-server (running OpenBSD 4.5-stable) that is only reachable
over IPv6. Passive FTP works fine, but active FTP doesn't seem to work.
I run ftpd from rc.conf.local
On Tue, May 26, 2009 at 08:50:32PM +, Stuart Henderson wrote:
On 2009-05-25, Maurice Janssen maur...@z74.net wrote:
I have an FTP-server (running OpenBSD 4.5-stable) that is only reachable
over IPv6. Passive FTP works fine, but active FTP doesn't seem to work.
I run ftpd from rc.conf.local
Hi,
I have an FTP-server (running OpenBSD 4.5-stable) that is only reachable
over IPv6. Passive FTP works fine, but active FTP doesn't seem to work.
I run ftpd from rc.conf.local (-DAS6), not through inetd.
The client gets the following error:
ftp ls
229 Entering Extended Passive Mode
Stuart Henderson wrote:
On 2009-05-25, Maurice Janssen maur...@z74.net wrote:
Hi,
I have an FTP-server (running OpenBSD 4.5-stable) that is only reachable
over IPv6. Passive FTP works fine, but active FTP doesn't seem to work.
I run ftpd from rc.conf.local (-DAS6), not through inetd
Shouldn't this go in the OPENBSD_4_5 branch?
Index: newvers.sh
===
RCS file: /cvs/src/sys/conf/newvers.sh,v
retrieving revision 1.94
diff -u -r1.94 newvers.sh
--- newvers.sh 26 Feb 2009 17:55:17 - 1.94
+++ newvers.sh 1
Hi,
I'm trying to build a release (to be able to publish file sets for the
stable tree for a number of architectures on May 1st), but I'm having
some troubles.
Creating the links for the obj directories during 'make obj' fails like
this:
=== libexec/login_token
Ted Unangst wrote:
On Mon, Apr 27, 2009 at 1:54 PM, Maurice Janssen maur...@z74.net wrote:
=== libexec/ld.so
/bin/sh: cd: /usr/src/libexec/ld.so - No such file or directory
*** Error code 1
The mirror is broken because rsync, in its infinite wisdom, doesn't
copy directories named *.so
Theo de Raadt wrote:
So OpenBSD 4.5 will be available soon, next weekend.
I feel that I should urge people to avoid the new snapshots until
after they give 4.5 a try, because a few of us have been improving the
system installer a little bit. It is night and day.
Therefore; don't try to
On Tue, Mar 24, 2009 at 09:51:10AM +0100, Marc Espie wrote:
Yep, does not work with all ports. And I still have stuff I need to fix
in make itself before we even think of fixing the ports that don't work
with make -j: some of them don't work because the makefiles are wrong, and
some of them don't
On Wednesday, January 7, 2009 at 17:52:48 -0600, Andrew Daugherity wrote:
Without the DHCPRELEASE functionality, the only option is to wait
until the old lease expires.
There's another option: change the MAC address of the new card to match
the old card's MAC address. Somthing like this in your
On Thursday, November 27, 2008 at 23:56:31 -0600, Javier Vasquez wrote:
I'm sorry about my ignorance, but I was reading the section 5.4 about
releases, and couldn't find out how to upgrade a system from a
release, :(.
Maybe such upgrade is more like
http://www.openbsd.org/faq/upgrade44.html;?
On Saturday, November 22, 2008 at 06:52:14 -0600, Javier Vasquez wrote:
Hi,
I'm just looking at how openbsd works to see if it suits my needs. I
have a small old box (piii celeron @797 MHz 32KB $, with 512 MB
ram), and in my experience compiling just the linux kernel takes ~4
hrs, and compiling
On Sunday, November 23, 2008 at 13:56:44 +0100, Maurice Janssen wrote:
On Saturday, November 22, 2008 at 06:52:14 -0600, Javier Vasquez wrote:
Hi,
I'm just looking at how openbsd works to see if it suits my needs. I
have a small old box (piii celeron @797 MHz 32KB $, with 512 MB
ram), and in my
On Thursday, November 20, 2008 at 20:07:02 -0800, Jon wrote:
the /etc/hostname.em0 has 'inet static IP 255.255.255.0 NONE' in it.
I can resolve using the gateway as my nameserver in /etc/resolve.conf
the thing won't allow any traffic to go out - I am trying to ping
yahoo.com...
But if i update
Hi,
About a month ago, there was a security fix for -current, 4.2-stable and
4.3-stable. I expected to see the same fix for 4.4-stable just before
the release date, but I haven't seen it in cvs yet.
Will there be a fix for 4.4-stable or not?
Thanks,
Maurice
On Thursday, October 9, 2008 at 10:36:54 +0200, Guido Tschakert wrote:
Hi Folks,
just a few minutes ago a packet from Wim arrived in my office.
The CD's have arrived here (Amersfoort, Netherlands) today as well.
Thanks to all developers for another great release!
Don't forget to order your
On Wednesday, July 30, 2008 at 22:28:44 +0200, Mark Prins wrote:
you could save some time and energy by using the 4.3-stable release
from ftp://ftp.su.se/pub/mirrors/openbsd_stable/4.3-stable/ as this
has the errata/patches applied...
That's correct, but at this moment the latest patch (005)
On Thursday, May 8, 2008 at 21:08:54 +, Mike wrote:
Hello,
After a fresh install of obsd on a new server, I cannot update my system
to -stable.
The src has been obtained from cvs in the usual manner.
Here is the error :-
# cd /usr/src/sys/arch/sparc64/conf/
# ls
CVS
On Sunday, May 4, 2008 at 20:56:03 -0600, Anthony Roberts wrote:
I've been having trouble building releases for 4.3. It fails on
checkflist, apparently it doesn't expect to see /etc/firmware/ral-rt2860.
Output is:
snip
Yes, I noticed this as well. I think you can safely ignore this.
Maurice
Hi,
I installed 4.3-release on an O2 and noticed that it is quite slow
compared to 4.1-stable.
For example, it took more than 5 hours to build a kernel, that's about
the same as my Vax ;-)
Right now I'm running a make build and it is dead slow. Load is around
0.10 and top shows that the machine
Hi,
I just noticed that the files PACKAGES, PORTS and README in the 4.2
directory have a relative new date and mention OpenBSD 4.3.
Doesn't look right to me.
Maurice
On Friday, February 22, 2008 at 12:07:43 +, Edd wrote:
On Fri, Feb 22, 2008 at 10:33:00AM +0100, Maurice Janssen wrote:
About a year ago I started to create regular builds of the -stable
trees (the two supported trees). You can use them, if you trust me ;-)
You can find links to some
On Friday, February 22, 2008 at 05:48:14 -0300, Antonio Lobato wrote:
Hi all!
I read http://openbsd.org/security.html (and stable.html), but could
not make
sure about my question.
If today I download old versions (say /pub/OpenBSD/4.0/i386/cd40.iso) of
openbsd, does it already includes
. Just keep an eye on it, and I'll try get
the regular patch files and errata entries posted tonight.
CK
On Jan 29, 2008 11:06 AM, Maurice Janssen [EMAIL PROTECTED] wrote:
Hi,
I saw an email on the cvs list about some security fixes for 4.1-stable
and 4.2-stable. It seems that the patches
1 - 100 of 146 matches
Mail list logo
