Re: Planex GW-USMicroN not recognized by run

2009-06-19 Thread damien . bergamini
| OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009 there you go. this is 4.5-release. Damien

Re: Planex GW-USMicroN not recognized by run

2009-06-19 Thread Stuart Henderson
On 2009-06-18, Peter Miller feu...@gmail.com wrote: ugen0 at uhub0 port 5 Ralink 802.11 n WLAN rev 2.00/1.01 addr 2 usbdevs -v

Re: Planex GW-USMicroN not recognized by run

2009-06-19 Thread Peter Miller
| OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009 there you go. this is 4.5-release. Damien Thanks for the help Damien. Sorry for the noise. I will try a new snapshot tonight. Later Peter

Re: Planex GW-USMicroN not recognized by run

2009-06-18 Thread damien . bergamini
| [...] | So is this card actually supposed to be supported by either | current or 4.5? | | Later | Peter Hi, The USB ID for the Planex GW-USMicroN adapter was added to the run(4) driver just after the 4.5 release, so the June 16th i386 snapshot should work. From sys/dev/usb/if_run.c:

Re: Planex GW-USMicroN not recognized by run

2009-06-18 Thread Peter Miller
| [...] | So is this card actually supposed to be supported by either | current or 4.5? | | Later | Peter Hi, The USB ID for the Planex GW-USMicroN adapter was added to the run(4) driver just after the 4.5 release, so the June 16th i386 snapshot should work. From

Planex GW-USMicroN not recognized by run

2009-06-17 Thread Peter Miller
I have tried both 4.5 and a June 16th snapshot of current for i386. Both pick up the GW-USMicroN as ugen0 dmesg ugen0 at uhub0 port 2 Ralink 802.11 n WLAN rev 2.00/1.01 addr 4 usbdevs -v Controller /dev/usb0: addr 1: high speed, self powered, config 1, EHCI root hub(0x), NVIDIA(0x10de), rev