Peter [thuis] wrote:
The following minimal pf.conf causes the loss of UID/PID in pflog:
pf.conf
nat on vic2 to any - (vic2)
nat-anchor ftp-proxy/*
pass out quick log (user) proto tcp to port 54321
pass quick on lo0
pass in quick on vic2 from 172.16.1.1/24
-
So if I do
Hi Joachim,
As requested by you I reproduced the problem with a minimal pf.conf. The
bad thing
however is that the 'solution' I found is not portable to my real system
so it is probably
only part of the cause (or even a symptom only) Below a full fresh story
such that you
do not need to
On Sun, Feb 20, 2011 at 10:23:32PM +0100, Peter [prive] wrote:
Trying to find the problem I did the following:
I added 1 rule as the first rule.
pass out quick log (user) proto tcp to port 54321
Can you post a minimal pf.conf that exhibits this problem? It looks like
you have other rules as
Hi,
I am experiencing some problems with pf: On one of my ethernet ports
UID/PID is not working (on the others it does work). Therefore UID based
rules do not work on that port.
Details:
On my firewall (PC engines board) there are 4 ethernet ports: 3 physical
(vc0, vc1 and vc3) and 1 tunnel
4 matches
Mail list logo