1ff07 cp0
panic: trap type 6, code-0, pc-d02b0a10
--
Thanks,
Insan Praja SW
panic: trap type 6, code-0, pc-d02b0a10
In S3000 bios only allow the PCIe em0.
Set s3000 em1 (PCI) to 'disconnect'
-
--
Insan Praja SW
on an intel
SE7230NH1-E.
Thanks Again,
On 9/14/07, Insan Praja SW [EMAIL PROTECTED] wrote:
Dear all,
I have recently facing a problem when installing openBSD 4.0 on intel
S3000AH, it seems that the embedded gigabit ethernet (em1) is causing
this, since openBSD installer trap a kernel panic
.
2. There were problems with ACPI, and the system was unstable( Try to
compile anything).
But With this snapshot all works great.
I haven't tried 4.1 or later snapshots.
Matiss
Insan Praja SW wrote:
Dear all,
I have recently facing a problem when installing openBSD 4.0 on intel
S3000AH
On Tue, 18 Sep 2007 05:28:47 +0700, Stuart Henderson [EMAIL PROTECTED]
wrote:
don't worry, I will give 4.1 I try, since I also like my machine
up-to-date :D
Thanks Y'all,
On 2007/09/18 04:47, Insan Praja SW wrote:
I tested the motherboard using 3.9 obsd, and it works like charm..
if you
,
--
Insan Praja SW
Guys,
OpenBSD 4.1 on Intel S3000AH doesn't even sigh...
Thanks for the helps, hints and clues..
On Tue, 18 Sep 2007 05:28:47 +0700, Stuart Henderson [EMAIL PROTECTED]
wrote:
On 2007/09/18 04:47, Insan Praja SW wrote:
I tested the motherboard using 3.9 obsd, and it works like charm
segments per queue
option MSGSSZ=128 # size of a message segment
option MSGTQL=2048 # max messages in system
(optimization for squid), after several hours running it went bad and
panicking.. This happen several times, using .mp or .generic. From the
panic message,
Any help, please?
Thanks
Insan Praja
, but with OpenBSD base.
Thanks,
http://www.undeadly.org/cgi?action=articlesid=20071003090749
--
Insan Praja SW
On Sat, 06 Oct 2007 07:23:02 +0700, Piotrek Kapczuk
[EMAIL PROTECTED] wrote:
Wow, I've tried pfsense and now i'm going to leech the comixwall :D
Thanks,
Insan
2007/10/6, Cyrus [EMAIL PROTECTED]:
I'm looking for a ready to install roll package for configureing and
administering a OpenBSD
Praja SW
Dear Misc@,
Currently I'm setting up ibgp session between quagga and openbgpd, I got
it up, but it seem no route injected to the fib, when I traced to an
address learned from quagga, it still choose default route and using
bgpctl fib couple and bgpctl -n reload is not changing anything. If
On Mon, 21 Jan 2008 21:50:42 +0700, Stuart Henderson [EMAIL PROTECTED]
wrote:
On 2008/01/21 21:36, Insan Praja SW wrote:
Currently I'm setting up ibgp session between quagga and openbgpd, I got
it up, but it seem no route injected to the fib, when I traced to an
address learned from quagga
On Mon, 21 Jan 2008 21:50:42 +0700, Stuart Henderson [EMAIL PROTECTED]
wrote:
On 2008/01/21 21:36, Insan Praja SW wrote:
Currently I'm setting up ibgp session between quagga and openbgpd, I got
it up, but it seem no route injected to the fib, when I traced to an
address learned from quagga
On Mon, 21 Jan 2008 21:50:42 +0700, Stuart Henderson [EMAIL PROTECTED]
wrote:
On 2008/01/21 21:36, Insan Praja SW wrote:
Currently I'm setting up ibgp session between quagga and openbgpd, I got
it up, but it seem no route injected to the fib, when I traced to an
address learned from quagga
. I got no
luck with:
pass on $ext_if from $NET2 to any modulate state rtable 1, NET2 always
use the default route via $ext_if when going to regional exchange
I appreciate any input and suggestion regarding this.
Thanks,
Insan Praja SW
as 65021
|---| |--|
|QUAGGA |--| reg
On Fri, 25 Jan 2008 16:28:42 +0700, Henning Brauer [EMAIL PROTECTED]
wrote:
* Insan Praja SW [EMAIL PROTECTED] [2008-01-24 18:43]:
Hi Misc@,
I'm currently setup bgp router using openbgp. Routes learned from
openbgpd
are stored in routing table 1. So, I got this client from NET2, coming
from
On Fri, 25 Jan 2008 16:28:42 +0700, Henning Brauer [EMAIL PROTECTED]
wrote:
* Insan Praja SW [EMAIL PROTECTED] [2008-01-24 18:43]:
Hi Misc@,
I'm currently setup bgp router using openbgp. Routes learned from
openbgpd
are stored in routing table 1. So, I got this client from NET2, coming
Hi Misc@,
I'm currently using a patched net-snmp-5.4p1 (patch came from
packetmischief.ca) on an 4.2 AMD64 box. It seem that snmpd stopped
unexpectedly over and over again, I can't figured out why because for
about 1 minute it works just fine. Maybe someone on the list can point me
the problem or
Hi Misc@,
While testing my brandnew 4.3-beta AMD64.MP webserver, I apply a simple
pf.conf to let some connection in and all out. But something interesting
came out, pf actually blocks my webserver googlebot apps originated from
the server, which is strange since I use pass out all. So, I'm
On Tue, 26 Feb 2008 09:31:29 +0700, Ted Unangst [EMAIL PROTECTED]
wrote:
On 2/25/08, Insan Praja SW [EMAIL PROTECTED] wrote:
Hi Misc@,
While testing my brandnew 4.3-beta AMD64.MP webserver, I apply a simple
pf.conf to let some connection in and all out. But something
interesting
came out
Hi Misc@,
Last weekend I took a peek at daily changelog. Suprising enough to see
that MPLS actually made it. Wow!
OpenBSD maybe the only multiplatform OS, that could turn a desktop into a
MPLS router.. Great Job guys!
(I wonder when you guys start on 802.1ad 802.1ah :D)
Cheers,
Insan
--
On Mon, 28 Apr 2008 07:00:47 +0700, Aaron Glenn [EMAIL PROTECTED]
wrote:
On Sun, Apr 27, 2008 at 4:28 PM, Insan Praja SW [EMAIL PROTECTED]
wrote:
Hi Misc@,
Last weekend I took a peek at daily changelog. Suprising enough to see
that
MPLS actually made it. Wow!
OpenBSD maybe the only
Hi Misc@,
Today I find a very difficult situation, I cannot find any shop in
Indonesia that have stocks on single port intel PRO/1000MT PCI NICs. So I
had to make a decision, replace this NICs with something more available
and that would be Dlink DFE530T NIC, which I had no experience on
On Mon, 05 May 2008 20:07:23 +0700, Eke Nordin [EMAIL PROTECTED]
wrote:
On Sat, May 3, 2008 at 2:14 PM, Insan Praja SW [EMAIL PROTECTED]
wrote:
Hi Misc@,
Today I find a very difficult situation, I cannot find any shop in
Indonesia that have stocks on single port intel PRO/1000MT PCI NICs
On Tue, 06 May 2008 11:23:46 +0700, Tomas Bodzar [EMAIL PROTECTED]
wrote:
Hi,
From HW view is more than enough this type :
http://www-03.ibm.com/systems/x/hardware/rack/x3250/index.html
but I don't know how much is HW from this server supported in OpenBSD.In
specifications are only Win
On Wed, 07 May 2008 21:03:18 +0700, smartTERRA NOC [EMAIL PROTECTED]
wrote:
An IBM x3250 looks like this on dmesg:
OpenBSD 4.3-current (GENERIC.MP) #0: Thu Mar 13 05:46:13 WIT 2008
As discussed on this ML a MP enable kernel is not a good choice for a
performant firewall solution...
Falk
Hi Misc@,
Since I got an Gigabyte motherboard, and installed 4.2-Stable and now
4.3-Stable, I cannot get re(4) (Dlink H/W) working with VLANs. When I use
VLAN on them, I can ping it, but when I tried to ssh or other services, it
wont work. We use 100mbps link on it.
So, maybe anyone on the Misc@
On Mon, 12 May 2008 16:37:38 +0700, Stuart Henderson [EMAIL PROTECTED]
wrote:
On 2008-05-12, Insan Praja SW [EMAIL PROTECTED] wrote:
Since I got an Gigabyte motherboard, and installed 4.2-Stable and now
4.3-Stable, I cannot get re(4) (Dlink H/W) working with VLANs. When I
use
VLAN on them
On Tue, 13 May 2008 03:36:16 +0700, Brad [EMAIL PROTECTED] wrote:
Try out the attached patch which has already been commited to -current
which fixes the hardware VLAN tagging. Get back to me with the results
and
I can get this commited to the 4.3/4.2 -stable branches.
Hi Brad,
I just
Hi Misc@,
Just wondering around, is there any multicasting technology (PIM-SM,
PIM-SSM etc) currently developed or implemented in OpenBSD?. Since working
with this unbelievable OS (especially with routing/filtering/forwarding) I
wish to know more about it.
Right now I managed to use
- l2tp
- mac-in-mac
- bgp/vpn/vrf
which is all breakthrough in free-functional-secure os but nobody touches
PIM-SM/SSM. I'm not fussing about it, just curious.. Cause dvrmpd/mrouted
kinda.. emm.. outdated?
just my Rp2.00
Thanks,
Insan
Insan Praja SW wrote:
Hi Misc@,
Just wondering around
Hi Misc@,
While working/experimenting with bgpd + carp and storing the prefix learn
by bgpd to a pftable, the carp peer hang when the other peer is rebooted.
Works ok before storing this prefixes to pftable. Both router are
identical.
So here is the config file on each router, dmesg and of
On Mon, 19 May 2008 02:50:33 +0700, Claudio Jeker
[EMAIL PROTECTED] wrote:
On Mon, May 19, 2008 at 12:36:25AM +0700, Insan Praja SW wrote:
On Mon, 19 May 2008 00:18:49 +0700, Clint Pachl [EMAIL PROTECTED]
wrote:
Hi Misc@,
I did man-it, yes I already know that OBSD got mrouted, mroute dan
On Mon, 19 May 2008 18:36:07 +0700, Claudio Jeker
[EMAIL PROTECTED] wrote:
On Mon, May 19, 2008 at 09:01:59AM +0700, Insan Praja SW wrote:
Hi Misc@,
While working/experimenting with bgpd + carp and storing the prefix
learn
by bgpd to a pftable, the carp peer hang when the other peer
/Documents/bogon-list.html
Thanks,
Insan,
2008/5/19 Insan Praja SW [EMAIL PROTECTED]:
pf.conf
---
table bogon const {192.168.0.0/16, 172.16.0.0/12, 0.0.0.0/7,
2.0.0.0/8,
5.0.0.0/8, 7.0.0.0/8, 23.0.0.0/8, 27.0.0.0/8, 31.0.0.0/8, 36.0.0.0/7,
39.0.0.0/8, 42.0.0.0/8, 49.0.0.0/8, 50.0.0.0/8
Hi Misc@,
Just update the kernel and userland from openbsd.de, and got the following
message..
myNiceMachine# dhcpd rl0
dhcpd: Can't find service dhcpd-sync in /etc/services
Anybody can point me where to go?
Best Regards and Thanks,
--
insandotpraja(at)gmaildotcom
On Thu, 22 May 2008 03:07:40 +0700, Kenneth R Westerback
[EMAIL PROTECTED] wrote:
all righty...
On Thu, May 22, 2008 at 02:42:10AM +0700, Insan Praja SW wrote:
Hi Misc@,
Just update the kernel and userland from openbsd.de, and got the
following
message..
myNiceMachine# dhcpd rl0
dhcpd
, you can check cvsweb
(http://www.openbsd.org/cgi-bin/cvsweb/src/etc/services) and patch it
in yourself or use the shiny new sysmerge.sh to merge it from a
snapshot tarball...
On Wed, May 21, 2008 at 12:42 PM, Insan Praja SW [EMAIL PROTECTED]
wrote:
Hi Misc@,
Just update the kernel and userland
Hi Misc@,
Right now i'm playin' with bgpd filter setup. I've successfully create an
ebgp between another obsd4.3-current and ibgp between a fbsd/zebra.
I understand on most ibgp implementation (ciscoz/quagga), prefixes from
ebgp peer are more preferred than ibgp. But that isn't happening
On Wed, 18 Jun 2008 04:15:52 +0700, Renaud Allard [EMAIL PROTECTED]
wrote:
Hello,
I have two servers running OpenBSD 4.3-stable amd64, both sharing one IP
using CARP with load balancing using ip-stealth. (using balancing ip
without stealth just doesn't work at all and overloads the network)
Hi Misc@,
Right now I got several machines on 4.3-current, one of them are BGP
router. So, on June 20th 2008 snapshot, I got some error like this,
Jun 21 00:49:49 core1 bgpd[3564]: neighbor a.b.c.5 (radnet):
session_connect socket: No buffer space available
Jun 21 00:50:00 core1 bgpd[3564]:
Hi,
I got two machine on June 23rd snapshots, which slowly decrease its free
memory till it drops dead. Actually, this happens since maybe 3 latest
snapshots during last week till now. When it did, even when I currently
ssh-ing to the machine, and execute a command such uname -a or
Hi Misc@,
I currently caught a kernel panic that says:
uvm_fault(0x 80b7b0e0, 0x0, 0, 1) - e
kernel : page fault trap, code=0
Stopped at pf_state_tree_RB_REMOVE_COLOR + 0x1C0: cmpl $0x1,0x40(%rsi)
ddb {0} trace
pf_state_tree_RB_REMOVE_COLOR() at pf_state_tree_RB_REMOVE_COLOR+0x1c0
On Tue, 24 Jun 2008 23:55:47 +0700, Stuart Henderson [EMAIL PROTECTED]
wrote:
In gmane.os.openbsd.misc, you wrote:
Stopped at pf_state_tree_RB_REMOVE_COLOR + 0x1C0: cmpl $0x1,0x40(%rsi)
OpenBSD 4.3-current (GENERIC.MP) #7: Tue Jun 24 20:27:50 WIT 2008
We can't tell which files are in
On Wed, 25 Jun 2008 20:47:50 +0700, Insan Praja SW [EMAIL PROTECTED]
wrote:
Sorry, the title should be 25 June AMD64 Snapshots Kernel Panic
Thanks,
Insan
Hi Misc@,
This is a recent panic I got on OpenBSD 4.3-current (GENERIC.MP) #8:
Wed Jun 25 09:55:34 WIT 2008 . The source is updated
Hi Misc@,
This is a recent panic I got on OpenBSD 4.3-current (GENERIC.MP) #8: Wed
Jun 25 09:55:34 WIT 2008 . The source is updated to this morning Wed Jun
25 09:55:34 WIT.
This is what panicking:
kernel: page fault trap, code=0
stopped at pf_state_tree_RB_INSERT_COLOR+0x63: movq 0x28
Hi Misc@,
on latest OpenBSD 4.4-beta (GENERIC.MP) #18: Mon Jul 7 08:40:47 WIT
2008 AMD64 machine, while lookin' to my new favorite tool systat, on the
first page, I got the Can't get KERN_NCHSTATS: Cannot allocate memory.
I wonder what happen, it's a 1GB Memory machine, on 4 juli snapshot,
On Mon, 07 Jul 2008 21:32:08 +0700, Artur Grabowski [EMAIL PROTECTED]
wrote:
Yup,
I just build ke userland and it turns out you're right :D
Thanks,
Insan
Your userland is out of sync with the kernel. That's bad, mmkay?
//art
Insan Praja SW [EMAIL PROTECTED] writes:
Hi Misc@,
on latest
On Tue, 08 Jul 2008 21:59:43 +0700, David Krause [EMAIL PROTECTED]
wrote:
Hi Misc@,
Currently I am on AMD64 4.4-beta, and yes.. I got the latest source from
July 7, and yes, it is been a stable machine for about a day, no complains
or anything.
Thanks all,
Insan
* Insan Praja SW [EMAIL
Hi Misc@,
I was wondering if I could use pf to read and write DSCP code to packets,
maybe using scrub or altq? If there is a way to do it using Puffy, maybe
I could try it on my box.
Thanks,
Insan
--
insandotpraja(at)gmaildotcom
On Tue, 15 Jul 2008 13:39:57 +0700, Claer [EMAIL PROTECTED] wrote:
On Tue, Jul 15 2008 at 32:01, Insan Praja SW wrote:
Hi Misc@,
I was wondering if I could use pf to read and write DSCP code to
packets,
maybe using scrub or altq? If there is a way to do it using Puffy,
maybe
I could try
On Tue, 15 Jul 2008 21:49:46 +0700, GVG GVG [EMAIL PROTECTED] wrote:
It stand for Maximum Transmit Unit.
On Tue, Jul 15, 2008 at 3:54 PM, David Hill [EMAIL PROTECTED] wrote:
On Tue, Jul 15, 2008 at 03:42:58PM +0200, GVG GVG wrote:
Dear list,
was going through the OpenBSD tcpdump version
Hi Misc@,
Right now I'm simulating transit network using bgpd. So, I'd like to ask a
few question.
Right now my network acting as a transit network. I got three routers, one
is facing to the customer and two are facing to a different upstreams.
Probably just like this:
-
Hi Misc@,
Recently just update the kernel on my i386 routers, and, eventually got
Aug 2 19:20:00 GreenServiceRouter /bsd: pfr_update_stats: assertion
failed on the console screen and /var/log/messages. I use pf and bgpd
heavily. So this might because my pf setting, which is ok before or,
Dear misc@,
After repeatedly got the pfr_update_stats: assertion failed, and the
network become slow, I set pfctl debug level to loud, and this is what I
get:
Aug 5 02:01:39 GreenServiceRouter /bsd: pf: wire key attach failed on
all: TCP in wire: 192.168.0.32:1538 10.10.10.119:22
Hi Misc@,
Did anyone had difficulities accessing/browsing this sites? I'm trying to
get a hold on symon, syweb dan pfstat, but I can't seem to access/browse
from my network (20x.x0.1x4.0/23).
Sorry for the noise,
Thanks,
Insan
--
insandotpraja(at)gmaildotcom
On Thu, 14 Aug 2008 09:38:52 +0700, Steve Shockley
[EMAIL PROTECTED] wrote:
Insan Praja SW wrote:
(20x.x0.1x4.0/23).
Obfuscation doesn't help much when your IP address is in the headers...
Shame on me :P
--
insandotpraja(at)gmaildotcom
Hi Misc@,
I Currently busting my a** to setup cizcoz catalyst 3550 to do dot1q
tunneling over EoMPLS network. Its seem the only way to do it is to use
this 3*50 Catalysts. But I'm curious, if I created a vlan interface over
vlan interface on OBSD(ie, create a vlan interface over a phy_if,
On Fri, 22 Aug 2008 01:31:00 +0700, Reyk Floeter [EMAIL PROTECTED] wrote:
hi,
On Thu, Aug 21, 2008 at 04:48:02PM +0200, Henning Brauer wrote:
* Claudio Jeker [EMAIL PROTECTED] [2008-08-21 16:11]:
If we stack vlan interfaces I don't see a real need for such a button.
switch vendors don't
On Fri, 22 Aug 2008 02:34:12 +0700, Reyk Floeter [EMAIL PROTECTED] wrote:
On Thu, Aug 21, 2008 at 04:05:50PM +0200, Claudio Jeker wrote:
no point in just doing that.
a button to change the ether type would make sense.
this is not trivial because it would require a change in the Rx path
Hi Misc@,
upgrading my kernel via cvs to i386 4.4-current sept 7th, I can't use
ifconfig [group]. Something like ifconfig vlan or ifconfig em will
show something like ifconfig: SIOCGIFFLAGS: Device not configured. Not
happening to September 6th kernel.
Thanks,
--
On Tue, 09 Sep 2008 22:15:39 +0700, Jason Dixon [EMAIL PROTECTED]
wrote:
On Tue, Sep 09, 2008 at 10:15:16AM -0400, Jason Dixon wrote:
I can confirm this on a kernel I bought last night for testing Henning's
Obviously I meant built. Although I've already put my pre-order in,
maybe that
On Fri, 12 Sep 2008 19:48:04 +0700, Jens Kassel [EMAIL PROTECTED]
wrote:
Hello,
I want to create BGP speaker that can give different next-hop address
for same prefix dependent on the BGP peer.
E.g. for the prefix 10.20.30.40/32 a want to tell peer1 to use next-hop
10.0.0.1 and tell peer2
Hi Misc@,
My company recently bought 202[dot]90[dot]194[dot]0/23 IPs, and since we
start using this IPs, I can't access www.bsdly.net and several others site
on the net. When check through robtex.com, a company in India seem to
still include these IPs into their RADB database. I can't email
On Tue, 16 Sep 2008 12:01:58 +0700, Constantine A. Murenin
[EMAIL PROTECTED] wrote:
2008/9/16 Insan Praja SW [EMAIL PROTECTED]:
On Tue, 16 Sep 2008 04:27:00 +0700, Peter N. M. Hansteen
[EMAIL PROTECTED]
wrote:
Insan Praja SW [EMAIL PROTECTED] writes:
My company recently bought 202[dot
On Tue, 16 Sep 2008 04:27:00 +0700, Peter N. M. Hansteen [EMAIL PROTECTED]
wrote:
Insan Praja SW [EMAIL PROTECTED] writes:
My company recently bought 202[dot]90[dot]194[dot]0/23 IPs, and since
we start using this IPs, I can't access www.bsdly.net and several
others site on the net
Hi Misc@,
I find out after adding a tables in /etc/pf.conf eg, table peace_net
counters const {192.168.0.0/24} and do a pfctl -f /etc/pf.conf, and
tried to see the contents pfctl -t peace_net -vTshow replies with
pfctl: Table does not exist. Is there something wrong with my setup or
On Tue, 16 Sep 2008 16:57:20 +0700, Raimo Niskanen
[EMAIL PROTECTED] wrote:
On Tue, Sep 16, 2008 at 04:20:11PM +0700, Insan Praja SW wrote:
Hi Misc@,
I find out after adding a tables in /etc/pf.conf eg, table peace_net
counters const {192.168.0.0/24} and do a pfctl -f /etc/pf.conf, and
tried
Hi Misc@,
Right now I'm using bgpd to labeled my internet routes, so I can use it
with pf to split bandwidth allocation on single interface to two distinct
network, the internet and regional exchange, and using this way I only
forward/allow routeable IP addresses supplied from bgpd. Other
Hi Misc,
Got this interfaces on my router,
$ ifconfig em
em0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500
lladdr 00:15:17:49:04:0d
description: ON_PORT_28
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6
On Thu, 25 Sep 2008 19:07:54 +0700, Henning Brauer [EMAIL PROTECTED]
wrote:
* Claudio Jeker [EMAIL PROTECTED] [2008-09-25 11:15]:
$ bgpctl sh fib next
flags: * = valid, B = BGP, C = Connected, S = Static
N = BGP Nexthop reachable via this route
r = reject route, b =
On Tue, 14 Oct 2008 14:33:19 +0700, Siju George [EMAIL PROTECTED]
wrote:
Hi Siju,
I think there are several things you need to understand more about pf
quick option.
If you don't use quick option on rules, then it will be last matching rule
applied, but if you you use quick option, the
Hi misc@,
Working on current here, trying to create mpe but all I can get is;
$ sudo ifconfig mpe0 create
ifconfig: SIOCIFCREATE: Invalid argument
I guess its not enabled yet. I'm asking just to make sure my box is ok and
nothing else.
Thanks,
--
insandotpraja(at)gmaildotcom
On Fri, 17 Oct 2008 23:42:55 +0700, Vivek Ayer [EMAIL PROTECTED]
wrote:
Hi guys,
Just wanted to let you folks know that my lab, due to my insistence,
is now running OpenBSD on 5 rigs:
2 CARP/pfsync firewalls
1 DNS Server
2 CARP/pfsync/load-sharing web servers (sparc64)
I'm sure there's
if_ethersubr.c
if (etype == ETHERTYPE_VLAN || etype == ETHERTYPE_QINQ) {
===
if ((m-m_flags M_VLANTAG) || etype == ETHERTYPE_VLAN) {
1.127
Best Regards,
Insan Praja SW
On Thu, Aug 21, 2008 at 04:05:50PM +0200, Claudio Jeker wrote:
no point in just doing
Hi Misc@,
In a few days I'm going to start new RAS project, and I'd like to use OBSD
as ppp/pppoe server. Has anyone ever done this before? I'm looking to
manage ppp clients access and bandwidth using radius server, but I had
limited experiences with ppp server and radius.
If anyone willing
Hi Misc@,
I'm compiling a 27 November source tree, kernel and userland. Just as it
finished booting, it went panic. I got 25 November kernel and userland
which works just fine. Thanks.
Here it comes,
OpenBSD 4.4-current (GENERIC) #48: Thu Nov 27 16:20:26 WIT 2008
[EMAIL
Hi Misc@,
Still getting panic on 28 kernel, the same message. It's an intel S3000AH
mainboard with 2 onboard intel em nics and 1 pci em nic. Browsing through
CVSWeb, I can see that in em.c rev. 1.196 there are some whitespace fixes
in em_rxeof. From dmesg, it seem that the panic related to
On Sat, 29 Nov 2008 02:38:33 +0700, Stuart Henderson [EMAIL PROTECTED]
wrote:
On 2008-11-27, Insan Praja SW [EMAIL PROTECTED] wrote:
em0 at pci3 dev 0 function 0 Intel PRO/1000MT (82573E) rev 0x03: irq
9, address 00:15:17:49:03:b3
em1 at pci4 dev 1 function 0 Intel PRO/1000MT (82540EM) rev
Hi,
On Sat, 29 Nov 2008 02:38:33 +0700, Stuart Henderson [EMAIL PROTECTED]
wrote:
On 2008-11-27, Insan Praja SW [EMAIL PROTECTED] wrote:
em0 at pci3 dev 0 function 0 Intel PRO/1000MT (82573E) rev 0x03: irq
9, address 00:15:17:49:03:b3
em1 at pci4 dev 1 function 0 Intel PRO/1000MT (82540EM
Hi Misc@ and Stuart,
On Sat, 29 Nov 2008 17:06:59 +0700, Stuart Henderson [EMAIL PROTECTED]
wrote:
In gmane.os.openbsd.misc, you wrote:
If there's any diffs for the driver?
this backs out the commit which will have caused the problems
you saw and should restore it to working behaviour.
On Tue, 02 Dec 2008 11:17:42 +0700, David Gwynne [EMAIL PROTECTED] wrote:
hi,
can you please try this diff and see if it solves your panics?
Hi David and Misc@,
I already use the rev1.199 source code which back out the 1.197 source
code. But I'm going to give it a try on a non-production
On Tue, 02 Dec 2008 11:17:42 +0700, David Gwynne [EMAIL PROTECTED] wrote:
Hi,
Here the dmesg attach after compiling the source. It works just fine but I
can't change em(4) MTU over 1600.
$ sudo ifconfig em0 mtu 1514
ifconfig: SIOCSIFMTU: Invalid argument
$ sudo ifconfig re0 mtu 1600
Thanks,
Hi misc@,
on recent kernel, my OpenBSD Bridge/Router seems to get panic when its
adjacent switch is rebooted. The switch is Cisco 3550-12T. I need to
change it's MTU which required the ciscoz reloaded. Cisco bridge protocol
is spanning-tree mode rapid-pvst
The OBSD machine it self is acting
Hi Misc@,
is there anything on man (8) how to set irq allocation for certain devices
like NICs? I tried apropos but I can't find userland application on base
to change this.
Thanks,
Insan,
--
insandotpraja(at)gmaildotcom
On Mon, 05 Jan 2009 15:29:01 +0700, Otto Moerbeek o...@drijf.net wrote:
On Mon, Jan 05, 2009 at 03:03:47PM +0700, Insan Praja SW wrote:
Hi Misc@,
is there anything on man (8) how to set irq allocation for certain
devices like NICs? I tried apropos but I can't find userland application
on base
On Mon, 05 Jan 2009 15:29:01 +0700, Otto Moerbeek o...@drijf.net wrote:
On Mon, Jan 05, 2009 at 03:03:47PM +0700, Insan Praja SW wrote:
Hi Misc@,
is there anything on man (8) how to set irq allocation for certain
devices like NICs? I tried apropos but I can't find userland application
on base
On Mon, 05 Jan 2009 23:53:01 +0700, Philip Guenther guent...@gmail.com
wrote:
On Mon, Jan 5, 2009 at 12:48 AM, Insan Praja SW insan.pr...@gmail.com
wrote:
...
I always got a;
ping: sendto: No buffer space available
ping: wrote 202.abc.de.fgh 64 chars, ret=-1
To quote a message
On Tue, 06 Jan 2009 18:07:12 +0700, Stuart Henderson s...@spacehopper.org
wrote:
On 2009-01-06, Insan Praja SW insan.pr...@gmail.com wrote:
On Mon, 05 Jan 2009 23:53:01 +0700, Philip Guenther guent...@gmail.com
wrote:
On Mon, Jan 5, 2009 at 12:48 AM, Insan Praja SW insan.pr...@gmail.com
Hi Misc@,
recently installed a i386-current from january 11th 2009, on an intel
s3210SH serverboard. I run pf, bgpd, snmpd and ntpd. When I accidentally
unplugged em0, somehow it went panic and said panic: rtfree 2. I entered
ddb and run a trace with the following result:
ddb trace
Hi Misc@,
So I tried to move the cable (and configs) to other interfaces. Unplugging
the cable will reproduce the problem. So IMHO it must be something in bgpd
or something in kernel that manages routes.
Thanks,
Insan
Hi Misc@,
recently installed a i386-current from january 11th 2009, on
On Wed, 14 Jan 2009 06:11:56 +0700, Claudio Jeker
cje...@diehard.n-r-g.com wrote:
On Tue, Jan 13, 2009 at 01:43:09PM +0700, Insan Praja wrote:
Hi Misc@,
On Tue, Jan 13, 2009 at 6:32 AM, Claudio Jeker
cje...@diehard.n-r-g.com wrote:
On Tue, Jan 13, 2009 at 05:49:00AM +0700, Insan Praja
Hi Misc@,
Could someone elaborate me with this tcpdump I had? After nat-ing,
checksum error shows, on the same packet..
rule 173.home.8/(match) [uid 0, pid 9731] pass in on vlan516:
172.16.33.254.64264 188.255.110.14.51413: S [tcp sum ok]
260322197:260322197(0) win 8192 mss
Hi,
On Wed, 25 May 2011 18:09:30 +0700, RLW seran...@o2.pl wrote:
Hello,
I wonder how to check what traffic falls into default queue?
I did this by creating an anchor and put all rules with default queue or
without it (which automagically falls to default queue).
best regards,
RLW
Hi Misc@,
Can't seem to forward any traffic via em0 and em1, an intel dual-port
gigabit adapter. Dmesg shows that its detected, tried to plug it to
another em's on another machines, no luck. The difference from GENERIC.MP
is that ipmi is enabled.
Thanks,
Insan Praja SW
DMESG;
OpenBSD
Hi,
On Thu, 26 May 2011 15:28:09 +0700, Claudio Jeker
cje...@diehard.n-r-g.com wrote:
On Thu, May 26, 2011 at 03:17:48PM +0700, Insan Praja SW wrote:
Hi Misc@,
Can't seem to forward any traffic via em0 and em1, an intel
dual-port gigabit adapter. Dmesg shows that its detected, tried to
plug
Hi,
On Fri, 27 May 2011 19:53:15 +0700, Kapetanakis Giannis
bil...@edu.physics.uoc.gr wrote:
Hi,
I'm trying to forward multicast traffic through my firewalls using
PIM-SM.
Only DVMRP
Are there any alternatives to XORP?
Yes. dvmrpd (8).
Is multicast_router=YES enough in
the guys at NOC didn't had the time to do so. We
are going to temporary disable the services on this machine until we able
to find a workaround. Any suggestion?
Best Regards,
Insan Praja SW
--
Using Opera's revolutionary email client: http://www.opera.com/mail/
: 0f b6 87 ad 00 00 00movzbl 0xad(%edi),%eax
# cd /usr/src/sys/netinet/
# cat -n tcp_input.c | head -n 667 | tail -n 1
667 if (inp-inp_ip_minttl inp-inp_ip_minttl ip-ip_ttl)
Thanks,
Insan Praja SW
--
Using Opera's revolutionary email client: http://www.opera.com/mail/
1 - 100 of 227 matches
Mail list logo