On 3/13/07, Azmadi <[EMAIL PROTECTED]> wrote:
Hi,
Not sure why your azalia doesn't work,
but I had almost similar situation with yours..
My compaq v3000 seem to have a problem with the
interrupt routing.. so i put a temp solution by doing polling instead
of waiting
the interrupt to be triggered.. not a good solution i guess.. but at
least it works
for me..
try run vmstat -i and see if azalia is listed in the interrupt list..
if it is.. well it's a different situation i guess..
vmstat -i yields
"""
interrupt total rate
irq10/azalia0 150 2
irq10/fxp0 3 0
irq10/pciide1 1384 22
irq1/pckbc0 251 4
irq0/clock 6304 101
irq8/rtc 8070 130
Total 16162 260
"""
Hm, doesn't look good for me then, does it?
I don't have any other BSD variant installed on my laptop, so I can
only provide some Linux output -- please tell me if this doesn't help
here; I do not want to flood your mailboxes in future!
Interrupts on Ubuntu:
"""
$ find /proc/irq -type d
/proc/irq/
/proc/irq/74
/proc/irq/74/sdhci:slot0
/proc/irq/66
/proc/irq/66/HDA Intel
/proc/irq/58
/proc/irq/58/ohci1394
/proc/irq/177
/proc/irq/177/[EMAIL PROTECTED]:0000:00:02.0
/proc/irq/177/ipw3945
/proc/irq/177/uhci_hcd:usb4
/proc/irq/185
/proc/irq/185/uhci_hcd:usb3
/proc/irq/225
/proc/irq/225/uhci_hcd:usb2
/proc/irq/50
/proc/irq/50/ehci_hcd:usb5
/proc/irq/50/uhci_hcd:usb1
/proc/irq/233
/proc/irq/233/libata
/proc/irq/15
/proc/irq/14
/proc/irq/14/ide0
/proc/irq/13
/proc/irq/12
/proc/irq/12/i8042
/proc/irq/11
/proc/irq/10
/proc/irq/9
/proc/irq/9/acpi
/proc/irq/8
/proc/irq/8/rtc
/proc/irq/7
/proc/irq/6
/proc/irq/5
/proc/irq/4
/proc/irq/3
/proc/irq/2
/proc/irq/1
/proc/irq/1/i8042
/proc/irq/0
"""
IIUC, this output tells me that on Linux IRQ66 is for audio, but on
OpenBSD, it says IRQ is 10.
Here's the complete dmesg from Linux
"""
[17179569.184000] Linux version 2.6.17-11-generic ([EMAIL PROTECTED])
(gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2
SMP Thu Feb 1 19:52:28 UTC 2007 (Ubuntu 2.6.17-11.35-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
[17179569.184000] BIOS-e820: 000000003f690000 - 000000003f698000 (ACPI data)
[17179569.184000] BIOS-e820: 000000003f698000 - 000000003f700000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[17179569.184000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[17179569.184000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[17179569.184000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[17179569.184000] 118MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f76d0
[17179569.184000] On node 0 totalpages: 259728
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 30352 pages, LIFO batch:7
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v000 PTLTD
) @ 0x000f7590
[17179569.184000] ACPI: RSDT (v001 FUJ___ DW1_____ 0x20060721 LTP
0x00000000) @ 0x3f691e9c
[17179569.184000] ACPI: FADT (v001 FUJ___ DW1_____ 0x20060721 LOHR
0x0000005a) @ 0x3f697e20
[17179569.184000] ACPI: MADT (v001 FUJ___ DW1_____ 0x20060721 LOHR
0x0000005a) @ 0x3f697e94
[17179569.184000] ACPI: BOOT (v001 FUJ___ DW1_____ 0x20060721 LTP
0x00000001) @ 0x3f697fd8
[17179569.184000] ACPI: MCFG (v001 FUJ___ DW1_____ 0x20060721 LOHR
0x0000005a) @ 0x3f697f34
[17179569.184000] ACPI: MADT (v001 FUJ___ DW1_____ 0x20060721 LTP
0x00000000) @ 0x3f697f70
[17179569.184000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL
0x20050228) @ 0x3f691ed8
[17179569.184000] ACPI: DSDT (v001 FUJ___ DW1_____ 0x20060721 MSFT
0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: 2 duplicate APIC table ignored.
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:14 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 6:14 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap:
40000000:a0000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 1995.990 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.524000] Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)
[17179571.524000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.568000] Memory: 1020052k/1038912k available (1911k kernel
code, 18072k reserved, 1073k data, 308k init, 121408k highmem)
[17179571.568000] Checking if this processor honours the WP bit even
in supervisor mode... Ok.
[17179571.648000] Calibrating delay using timer specific routine..
3999.06 BogoMIPS (lpj=7998138)
[17179571.648000] Security Framework v1.0.0 initialized
[17179571.648000] SELinux: Disabled at boot.
[17179571.648000] Mount-cache hash table entries: 512
[17179571.648000] CPU: After generic identify, caps: bfe9fbff 00100000
00000000 00000000 0000c1a9 00000000 00000000
[17179571.648000] CPU: After vendor identify, caps: bfe9fbff 00100000
00000000 00000000 0000c1a9 00000000 00000000
[17179571.648000] monitor/mwait feature present.
[17179571.648000] using mwait in idle threads.
[17179571.648000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179571.648000] CPU: L2 cache: 2048K
[17179571.648000] CPU: Hyper-Threading is disabled
[17179571.648000] CPU: After all inits, caps: bfe9fbff 00100000
00000000 00000140 0000c1a9 00000000 00000000
[17179571.648000] Checking 'hlt' instruction... OK.
[17179571.664000] SMP alternatives: switching to UP code
[17179571.664000] checking if image is initramfs... it is
[17179572.544000] Freeing initrd memory: 5326k freed
[17179572.544000] ACPI: Core revision 20060707
[17179572.544000] ACPI: Looking for DSDT ... not found!
[17179572.604000] CPU0: Intel Genuine Intel(R) CPU T2500 @
2.00GHz stepping 08
[17179572.604000] SMP alternatives: switching to SMP code
[17179572.604000] Booting processor 1/1 eip 3000
[17179572.616000] Initializing CPU#1
[17179572.696000] Calibrating delay using timer specific routine..
3991.86 BogoMIPS (lpj=7983730)
[17179572.696000] CPU: After generic identify, caps: bfe9fbff 00100000
00000000 00000000 0000c1a9 00000000 00000000
[17179572.696000] CPU: After vendor identify, caps: bfe9fbff 00100000
00000000 00000000 0000c1a9 00000000 00000000
[17179572.696000] monitor/mwait feature present.
[17179572.696000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179572.696000] CPU: L2 cache: 2048K
[17179572.696000] CPU: Hyper-Threading is disabled
[17179572.696000] CPU: After all inits, caps: bfe9fbff 00100000
00000000 00000140 0000c1a9 00000000 00000000
[17179572.696000] CPU1: Intel Genuine Intel(R) CPU T2500 @
2.00GHz stepping 08
[17179572.696000] Total of 2 processors activated (7990.93 BogoMIPS).
[17179572.696000] ENABLING IO-APIC IRQs
[17179572.696000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179572.840000] checking TSC synchronization across 2 CPUs: passed.
[17179572.844000] Brought up 2 CPUs
[17179572.932000] migration_cost=4000
[17179572.932000] NET: Registered protocol family 16
[17179572.932000] EISA bus registered
[17179572.932000] ACPI: bus type pci registered
[17179572.932000] PCI: Using MMCONFIG
[17179572.936000] Setting up standard PCI resources
[17179572.940000] ACPI: Interpreter enabled
[17179572.940000] ACPI: Using IOAPIC for interrupt routing
[17179572.940000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.940000] PCI: Probing PCI hardware (bus 00)
[17179572.944000] Boot video device is 0000:00:02.0
[17179572.944000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179572.948000] PCI: Transparent bridge - 0000:00:1e.0
[17179572.948000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.952000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[17179572.952000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[17179572.956000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[17179572.956000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[17179572.956000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10
12 14 15) *11
[17179572.956000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7
11 12 14 15)
[17179572.956000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7
10 12 14 15)
[17179572.960000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11
12 14 15) *10
[17179572.960000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7
*10 12 14 15)
[17179572.960000] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7
*11 12 14 15)
[17179572.960000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7
*10 12 14 15)
[17179572.960000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[17179572.960000] ACPI: Embedded Controller [EC0] (gpe 23) interrupt mode.
[17179572.964000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.964000] pnp: PnP ACPI init
[17179572.968000] pnp: PnP ACPI: found 8 devices
[17179572.968000] PnPBIOS: Disabled by ACPI PNP
[17179572.968000] PCI: Using ACPI for IRQ routing
[17179572.968000] PCI: If a device doesn't work, try "pci=routeirq".
If it helps, post a report
[17179572.968000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[17179572.968000] PCI: Bridge: 0000:00:1c.0
[17179572.968000] IO window: 2000-2fff
[17179572.968000] MEM window: da000000-dbffffff
[17179572.968000] PREFETCH window: d4000000-d5ffffff
[17179572.968000] PCI: Bridge: 0000:00:1c.1
[17179572.968000] IO window: 3000-3fff
[17179572.968000] MEM window: d6000000-d7ffffff
[17179572.968000] PREFETCH window: d0000000-d1ffffff
[17179572.968000] PCI: Bridge: 0000:00:1c.2
[17179572.968000] IO window: 4000-4fff
[17179572.968000] MEM window: d8000000-d9ffffff
[17179572.968000] PREFETCH window: d2000000-d3ffffff
[17179572.968000] PCI: Bridge: 0000:00:1e.0
[17179572.968000] IO window: 5000-5fff
[17179572.968000] MEM window: dc000000-dc0fffff
[17179572.968000] PREFETCH window: disabled.
[17179572.968000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17
(level, low) -> IRQ 169
[17179572.968000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179572.968000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16
(level, low) -> IRQ 177
[17179572.968000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179572.968000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18
(level, low) -> IRQ 185
[17179572.968000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179572.968000] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
[17179572.968000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179572.968000] NET: Registered protocol family 2
[17179573.004000] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[17179573.004000] TCP established hash table entries: 131072 (order:
8, 1048576 bytes)
[17179573.004000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179573.004000] TCP: Hash tables configured (established 131072 bind 65536)
[17179573.004000] TCP reno registered
[17179573.004000] Simple Boot Flag at 0x36 set to 0x1
[17179573.004000] audit: initializing netlink socket (disabled)
[17179573.004000] audit(1173912542.004:1): initialized
[17179573.008000] highmem bounce pool size: 64 pages
[17179573.008000] VFS: Disk quotas dquot_6.5.1
[17179573.008000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.008000] Initializing Cryptographic API
[17179573.008000] io scheduler noop registered
[17179573.008000] io scheduler anticipatory registered
[17179573.008000] io scheduler deadline registered
[17179573.008000] io scheduler cfq registered (default)
[17179573.008000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17
(level, low) -> IRQ 169
[17179573.008000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179573.008000] assign_interrupt_mode Found MSI capability
[17179573.008000] Allocate Port Service[0000:00:1c.0:pcie00]
[17179573.008000] Allocate Port Service[0000:00:1c.0:pcie02]
[17179573.008000] Allocate Port Service[0000:00:1c.0:pcie03]
[17179573.008000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16
(level, low) -> IRQ 177
[17179573.008000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179573.008000] assign_interrupt_mode Found MSI capability
[17179573.008000] Allocate Port Service[0000:00:1c.1:pcie00]
[17179573.008000] Allocate Port Service[0000:00:1c.1:pcie02]
[17179573.008000] Allocate Port Service[0000:00:1c.1:pcie03]
[17179573.008000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18
(level, low) -> IRQ 185
[17179573.008000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179573.008000] assign_interrupt_mode Found MSI capability
[17179573.008000] Allocate Port Service[0000:00:1c.2:pcie00]
[17179573.008000] Allocate Port Service[0000:00:1c.2:pcie02]
[17179573.008000] Allocate Port Service[0000:00:1c.2:pcie03]
[17179573.008000] isapnp: Scanning for PnP cards...
[17179573.360000] isapnp: No Plug & Play device found
[17179573.396000] Real Time Clock Driver v1.12ac
[17179573.396000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled
[17179573.396000] mice: PS/2 mouse device common for all mice
[17179573.396000] RAMDISK driver initialized: 16 RAM disks of 65536K
size 1024 blocksize
[17179573.396000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.396000] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[17179573.396000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2F] at
0x60,0x64 irq 1,12
[17179573.404000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179573.404000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.408000] EISA: Probing bus 0 at eisa.0
[17179573.408000] Cannot allocate resource for EISA slot 1
[17179573.408000] Cannot allocate resource for EISA slot 2
[17179573.408000] Cannot allocate resource for EISA slot 3
[17179573.408000] Cannot allocate resource for EISA slot 4
[17179573.408000] Cannot allocate resource for EISA slot 5
[17179573.408000] EISA: Detected 0 cards.
[17179573.408000] TCP bic registered
[17179573.408000] NET: Registered protocol family 1
[17179573.408000] NET: Registered protocol family 8
[17179573.408000] NET: Registered protocol family 20
[17179573.408000] Starting balanced_irq
[17179573.408000] Using IPI No-Shortcut mode
[17179573.408000] ACPI: (supports S0 S3 S4 S5)
[17179573.408000] Freeing unused kernel memory: 308k freed
[17179573.444000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.524000] Capability LSM initialized
[17179574.576000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [
PmRef] OemTableId [ Cpu0Ist] [20060707]
[17179574.580000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [
PmRef] OemTableId [ Cpu0Cst] [20060707]
[17179574.580000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179574.580000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179574.580000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [
PmRef] OemTableId [ Cpu1Ist] [20060707]
[17179574.580000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [
PmRef] OemTableId [ Cpu1Cst] [20060707]
[17179574.580000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[17179574.580000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179574.588000] ACPI: Thermal Zone [TZ00] (46 C)
[17179575.088000] ICH7: IDE controller at PCI slot 0000:00:1f.1
[17179575.088000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18
(level, low) -> IRQ 185
[17179575.088000] ICH7: chipset revision 2
[17179575.088000] ICH7: not 100% native mode: will probe irqs later
[17179575.088000] ide0: BM-DMA at 0x1810-0x1817, BIOS settings:
hda:DMA, hdb:pio
[17179575.088000] Probing IDE interface ide0...
[17179575.824000] hda: PHILIPS DVD+/-RW SDVD8820, ATAPI CD/DVD-ROM drive
[17179576.500000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.516000] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB
Cache, UDMA(33)
[17179576.516000] Uniform CD-ROM driver Revision: 3.20
[17179576.628000] SCSI subsystem initialized
[17179576.636000] libata version 1.20 loaded.
[17179576.640000] ahci 0000:00:1f.2: version 1.2
[17179576.640000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19
(level, low) -> IRQ 225
[17179582.460000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179582.460000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports
1.5 Gbps 0x5 impl SATA mode
[17179582.460000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[17179582.460000] ata1: SATA max UDMA/133 cmd 0xF8842500 ctl 0x0 bmdma
0x0 irq 233
[17179582.460000] ata2: SATA max UDMA/133 cmd 0xF8842580 ctl 0x0 bmdma
0x0 irq 233
[17179582.460000] ata3: SATA max UDMA/133 cmd 0xF8842600 ctl 0x0 bmdma
0x0 irq 233
[17179582.460000] ata4: SATA max UDMA/133 cmd 0xF8842680 ctl 0x0 bmdma
0x0 irq 233
[17179582.836000] ata1: SATA link up 1.5 Gbps (SStatus 113)
[17179582.836000] ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6063
85:3469 86:bf09 87:6063 88:203f
[17179582.836000] ata1: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48
[17179582.836000] ata1: dev 0 configured for UDMA/100
[17179582.836000] scsi0 : ahci
[17179583.040000] ata2: SATA link down (SStatus 0)
[17179583.040000] scsi1 : ahci
[17179583.244000] ata3: SATA link down (SStatus 0)
[17179583.244000] scsi2 : ahci
[17179583.448000] ata4: SATA link down (SStatus 0)
[17179583.448000] scsi3 : ahci
[17179583.448000] Vendor: ATA Model: FUJITSU MHV2080B Rev: 0000
[17179583.448000] Type: Direct-Access ANSI
SCSI revision: 05
[17179583.456000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[17179583.456000] sda: Write Protect is off
[17179583.456000] sda: Mode Sense: 00 3a 00 00
[17179583.456000] SCSI device sda: drive cache: write back
[17179583.456000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[17179583.456000] sda: Write Protect is off
[17179583.456000] sda: Mode Sense: 00 3a 00 00
[17179583.456000] SCSI device sda: drive cache: write back
[17179583.456000] sda: sda1 sda2 sda3
[17179583.880000] sda3: <openbsd: sda5 sda6bad subpartition - ignored
[17179583.880000] bad subpartition - ignored
[17179583.880000] >
[17179583.880000] sd 0:0:0:0: Attached scsi disk sda
[17179584.268000] Probing IDE interface ide1...
[17179584.320000] usbcore: registered new driver usbfs
[17179584.320000] usbcore: registered new driver hub
[17179584.324000] USB Universal Host Controller Interface driver v3.0
[17179584.324000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23
(level, low) -> IRQ 50
[17179584.324000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179584.324000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179584.328000] uhci_hcd 0000:00:1d.0: new USB bus registered,
assigned bus number 1
[17179584.328000] uhci_hcd 0000:00:1d.0: irq 50, io base 0x00001820
[17179584.328000] usb usb1: configuration #1 chosen from 1 choice
[17179584.328000] hub 1-0:1.0: USB hub found
[17179584.328000] hub 1-0:1.0: 2 ports detected
[17179584.356000] ieee1394: Initialized config rom entry `ip1394'
[17179584.432000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19
(level, low) -> IRQ 225
[17179584.432000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179584.432000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179584.432000] uhci_hcd 0000:00:1d.1: new USB bus registered,
assigned bus number 2
[17179584.432000] uhci_hcd 0000:00:1d.1: irq 225, io base 0x00001840
[17179584.432000] usb usb2: configuration #1 chosen from 1 choice
[17179584.432000] hub 2-0:1.0: USB hub found
[17179584.432000] hub 2-0:1.0: 2 ports detected
[17179584.536000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18
(level, low) -> IRQ 185
[17179584.536000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179584.536000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179584.536000] uhci_hcd 0000:00:1d.2: new USB bus registered,
assigned bus number 3
[17179584.536000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001860
[17179584.536000] usb usb3: configuration #1 chosen from 1 choice
[17179584.536000] hub 3-0:1.0: USB hub found
[17179584.536000] hub 3-0:1.0: 2 ports detected
[17179584.640000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16
(level, low) -> IRQ 177
[17179584.640000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179584.640000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179584.640000] uhci_hcd 0000:00:1d.3: new USB bus registered,
assigned bus number 4
[17179584.640000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x00001880
[17179584.640000] usb usb4: configuration #1 chosen from 1 choice
[17179584.640000] hub 4-0:1.0: USB hub found
[17179584.640000] hub 4-0:1.0: 2 ports detected
[17179584.744000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23
(level, low) -> IRQ 50
[17179584.744000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179584.744000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179584.744000] ehci_hcd 0000:00:1d.7: new USB bus registered,
assigned bus number 5
[17179584.744000] ehci_hcd 0000:00:1d.7: debug port 1
[17179584.744000] PCI: cache line size of 32 is not supported by
device 0000:00:1d.7
[17179584.744000] ehci_hcd 0000:00:1d.7: irq 50, io mem 0xdc444000
[17179584.748000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[17179584.748000] usb usb5: configuration #1 chosen from 1 choice
[17179584.748000] hub 5-0:1.0: USB hub found
[17179584.748000] hub 5-0:1.0: 8 ports detected
[17179584.852000] PCI: Enabling device 0000:07:09.0 (0000 -> 0002)
[17179584.852000] ACPI: PCI Interrupt 0000:07:09.0[A] -> GSI 20
(level, low) -> IRQ 58
[17179584.852000] PCI: Setting latency timer of device 0000:07:09.0 to 64
[17179584.904000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[58]
MMIO=[dc001000-dc0017ff] Max Packet=[2048] IR/IT contexts=[4/4]
[17179584.932000] Attempting manual resume
[17179584.992000] kjournald starting. Commit interval 5 seconds
[17179584.992000] EXT3-fs: mounted filesystem with ordered data mode.
[17179586.180000] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[00c09f0000b2b83c]
[17179595.216000] Linux agpgart interface v0.101 (c) Dave Jones
[17179595.228000] agpgart: Detected an Intel 945GM Chipset.
[17179595.228000] agpgart: Detected 7932K stolen memory.
[17179595.248000] agpgart: AGP aperture is 256M @ 0xc0000000
[17179595.296000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179595.352000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179595.408000] hw_random: RNG not detected
[17179595.988000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22
(level, low) -> IRQ 66
[17179595.988000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179596.028000] Synaptics Touchpad, model: 1, fw: 5.10, id:
0x258eb1, caps: 0xa04713/0x0
[17179596.056000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179596.064000] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[17179596.080000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[17179596.080000] sdhci: Copyright(c) Pierre Ossman
[17179596.088000] ieee80211_crypt: registered algorithm 'NULL'
[17179596.088000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[17179596.088000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
<[EMAIL PROTECTED]>
[17179596.112000] e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
[17179596.112000] e100: Copyright(c) 1999-2005 Intel Corporation
[17179596.148000] ts: Compaq touchscreen protocol output
[17179596.164000] ipw3945: Intel(R) PRO/Wireless 3945 Network
Connection driver for Linux, 1.1.0mp
[17179596.164000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[17179596.628000] sdhci: SDHCI controller found at 0000:07:09.1
[1180:0822] (rev 19)
[17179596.628000] PCI: Enabling device 0000:07:09.1 (0000 -> 0002)
[17179596.628000] ACPI: PCI Interrupt 0000:07:09.1[B] -> GSI 21
(level, low) -> IRQ 74
[17179596.628000] PCI: Setting latency timer of device 0000:07:09.1 to 64
[17179596.628000] mmc0: SDHCI at 0xdc001800 irq 74 DMA
[17179596.628000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16
(level, low) -> IRQ 177
[17179596.628000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[17179596.636000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network
Connection
[17179596.744000] ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20
(level, low) -> IRQ 58
[17179596.744000] PCI: Setting latency timer of device 0000:07:08.0 to 64
[17179596.772000] e100: eth0: e100_probe: addr 0xdc000000, irq 58, MAC
addr 00:16:36:82:C9:3D
[17179597.416000] lp: driver loaded but no devices found
[17179597.444000] ieee1394: sbp2: Driver forced to serialize I/O
(serialize_io=1)
[17179597.444000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179597.480000] Adding 2096472k swap on
/dev/disk/by-uuid/aa1bdcb9-c5d5-4b8b-8b48-7e7f374d12eb. Priority:-1
extents:1 across:2096472k
[17179597.544000] EXT3 FS on sda1, internal journal
[17179598.552000] ipw3945: Detected geography ABG (13 802.11bg
channels, 23 802.11a channels)
[17179598.896000] ieee80211_crypt: registered algorithm 'WEP'
[17179599.168000] NET: Registered protocol family 17
[17179603.276000] ACPI: AC Adapter [ACAD] (off-line)
[17179603.408000] ACPI: Battery Slot [BAT1] (battery present)
[17179603.432000] ACPI: Power Button (FF) [PWRF]
[17179603.432000] ACPI: Power Button (CM) [PWRB]
[17179603.432000] ACPI: Sleep Button (CM) [SLPB]
[17179603.432000] ACPI: Lid Switch [LID]
[17179603.492000] ACPI: Error installing notify handler
[17179603.624000] ibm_acpi: ec object not found
[17179603.668000] pcc_acpi: loading...
[17179603.832000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[17179603.832000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[17179606.952000] [drm] Initialized drm 1.0.1 20051102
[17179606.952000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16
(level, low) -> IRQ 177
[17179606.952000] [drm] Initialized i915 1.5.0 20060119 on minor 0
[17179607.220000] apm: BIOS not found.
[17179607.864000] NET: Registered protocol family 10
[17179607.864000] lo: Disabled Privacy Extensions
[17179607.864000] IPv6 over IPv4 tunneling driver
[17179609.916000] Bluetooth: Core ver 2.8
[17179609.916000] NET: Registered protocol family 31
[17179609.916000] Bluetooth: HCI device and connection manager initialized
[17179609.916000] Bluetooth: HCI socket layer initialized
[17179609.956000] Bluetooth: L2CAP ver 2.8
[17179609.956000] Bluetooth: L2CAP socket layer initialized
[17179609.960000] Bluetooth: RFCOMM socket layer initialized
[17179609.960000] Bluetooth: RFCOMM TTY layer initialized
[17179609.960000] Bluetooth: RFCOMM ver 1.7
[17179618.276000] eth1: no IPv6 routers present
"""
Thanks for all the support you already provided!
- Chris
