On Fri, Jul 14, 2023 at 04:56:52PM -0500, Jay F. Shachter wrote:
Esteemed Colleagues:
I got a little further in the installation procedure, thanks to your
advice regarding the disabling of nouveau. Now the installation
procedure is dying with the message
Status: openpty() failed
On Fri, 14 Jul 2023 17:30:46 +
Todd Gruhn wrote:
> What is the tiny thing stuch in the UBS port / hole ?
Are you saying that the mouse came with a tiny USB device stowed in a hole on
the underside of the mouse? If so, you need to dig it out and plug it into a
USB port on the computer.
Esteemed Colleagues:
I got a little further in the installation procedure, thanks to your
advice regarding the disabling of nouveau. Now the installation
procedure is dying with the message
Status: openpty() failed
Command: disklabel -w -r -f /tmp/disklabel.13 wd0 'wd0' 'fictitious'
I dont see a 'pair' thingy to use.
What is the tiny thing stuch in the UBS port / hole ?
On Fri, Jul 14, 2023 at 8:26 PM Thomas D. Dean wrote:
>
> On 7/14/23 05:37, Todd Gruhn wrote:
> > I found and buy a mouse.
> >
> > ON MOUSE:
> > Logitech
> > 6 keys to touch
> > Name / word
On 7/14/23 05:37, Todd Gruhn wrote:
I found and buy a mouse.
ON MOUSE:
Logitech
6 keys to touch
Name / word on top "DARK FIELD"
Name / word op bottom "Anywhere MX"
It is wire-less; has a eye (lost this name) on bottom
It will not work / talk to X-windows.
Any help
I found and buy a mouse.
ON MOUSE:
Logitech
6 keys to touch
Name / word on top "DARK FIELD"
Name / word op bottom "Anywhere MX"
It is wire-less; has a eye (lost this name) on bottom
It will not work / talk to X-windows.
Any help is usefull.
Thanks...
I use the owtemp and gpioow drivers all of the time with a ds18b20 clone device
on a number of raspberry pi. The instructions on how to hook one of those up
physically are all over the internet. When attached they will show up in
envstat. You probably will have to compile a custom kernel.
On Thu, 13 Jul 2023, Jay F. Shachter wrote:
The computer immediately says "Invalid partition table!"
This is very likely a message from the BIOS telling you that there's something
wrong with the partition table. Just zero it out:
Exit the installer (sysinst) in the main menu, then run:
dd