Hi,
Cause lighttpd was familar to me, I have used it under raspbian and Debian.
Lighttpd Web server, home minidlna film server.
If your usage is simple, then bozohttpd's setup will be very simple. For
instance, my setup is just four lines in /etc/inetd.conf (two each for
IPv4 and
g
very well is based on using UEFI.
I appreciate your work very much and your comments and advice will be welcome
and very valuable for me.
:)
John Klos
Hi,
I just set up an LSI MegaRAID controller with four 10 TB drives which
happen to be 4K sector drives. Everything works swimmingly, but I did
notice that bioctl isn't yet aware of 4K blocks.
Here's my mfii0 and RAID volume:
[ 1.033007] mfii0 at pci1 dev 0 function 0: "LSI MegaRAID SAS
Hi,
I've set up blocklistd on quite a few machines so far, and it has mostly
been straightforward and without issues. On the other hand, a few people
have locked themselves out and I can't figure out how or why from what I
see in the logs. Now it has happened to me, and I'm still clueless.
ver serial.
Can anyone point me in the right direction?
Thanks,
John Klos
Hello, all,
I'm trying to figure out how to create a mirrored set of disks using
bioctl with an mpt controller:
mpt0 at pci11 dev 1 function 0: Symbios Logic SAS1064 (rev. 0x02)
mpt0: interrupting at ivec 1f8f
mpt0: Phy 0: Link Status Unknown
mpt0: Phy 0: Link Status Unknown
mpt0: Phy 0: Link
No idea what's wrong with arcmsr, but
>However, sd0 still says it's one sector, and:
>scsictl /dev/scsibus1 scan any any
>returns instantly without any change in the volumes.
Scan attaches new devices, you probably need to detach sd0 first.
That works as expected on an amd64 system - I get
RAID controller on Alpha, and if so, what kind?
John Klos
Hello,
I have two Areca RAID controllers which I'd like to use with non-x86
systems. One is an ARC-1110, the other an ARC-1160ML. I've been testing
the ARC-1110 on NetBSD 8 on an amd64 system and on an Alpha.
The card shows up fine on both systems:
arcmsr0 at pci6 dev 14 function 0
arcmsr0:
Has anyone else seen CVS checkouts which have lots and lots of errors like
these? There are 79,000 in a CVS checkout of netbsd-6. Strange...
cvs checkout: warning: unrecognized response `d' from cvs server
cvs checkout: warning: unrecognized response `IOCONF= MD.ioconf' from
cvs server
cvs
Is it still not possible to boot from raidframe on GPT?
Booting from a GPT partition within a RAID within a GPT is not currently
supported. The best workaround would be to put your root in a
unpartitioned/disklabel-partitioned raid device.
Hmmm... So I created a standard ffs wedge for the
You may find this thread useful:
http://mail-index.netbsd.org/netbsd-users/2015/06/16/msg016240.html
Particularly the installboot steps.
Thanks. So I got things working by having gpt -> raidframe / of 1 TB and
newfsing rraid0a, then having gpt -> raidframe -> gpt -> ffs wedge of the
other 3
I have:
gpt show wd1
startsize index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 990
1024 7746927616 1 GPT part - NetBSD RAIDFrame component
Hi, all,
Since tmux is part of a standard NetBSD install, I've been using it
instead of screen. So far, so good. However, I've noticed that it
accumulates a LOT of CPU time even when the underlying tty and shell are
doing absolutely nothing. On a 60 MHz m68060 system that's been up for 53
Hi,
Is it just me, or does netbsd-7 from 17-Jan-2016 have issues with
fc-cache? Not that it should matter, but this is on an Alpha system. It
was updated from NetBSD 7.0 to netbsd-7. From postinstall:
fontconfig fix:
Copied
Hi,
I cannot answer, but it is not a good idea to use netbsd-7. I
experiment a lot of disk corruption (ffs2 with log) since my last upgrade of
netbsd-7 (8th of january, 2015, amd64). I have downgraded my system to
netbsd-7-0 (cvs).
It's funny you say that - I've had all sorts of problems
Hi,
I have a Sony laptop on which I want to run NetBSD 7/amd64. NetBSD 6 boots
fine, but NetBSD 7 defaults to acpiout0, which appears to be the VGA
output, instead of acpiout1, which is the laptop's LCD screen. How do I
switch between those outputs?
acpivga0 at acpi0 (GFX0): ACPI Display
. Also,
in insert mode in vi, one has to use control-h, as now backspace enters
^?. What changed? It'd be nice if this were fixed.
Thanks,
John Klos
Anyone seeing this with ntpd on netbsd-5?
Apr 19 06:30:42 andromeda ntpd[616]: local_clock:
usr/src/external/bsd/ntp/dist/ntpd/ntp_loopfilter.c line 703: unhandled
return value -1029338848 from ntp_adjtime in ntp_adjtime_error_handler at
line 327
Hi,
Is there a better way to install and update trusted root certificates in
NetBSD? The recommendation of using security/mozilla-rootcerts from pkgsrc
isn't a good one; first, it assumes that a system has NO other
certificates (/etc/openssl/certs/ must be empty), and second, it leaves a
20 matches
Mail list logo
