Hello,
The bugs listed are over a month old, and haven't been addressed yet.
It would be appreciated if corresponding maintainers identify whether
the bugs have been fixed, or need to be worked on, and take
appropriate action.
In most cases, reporters are standing by and ready to provide
make the intended lines aligned in the output (not in the code)
Signed-off-by: Uwe Kleine-König [EMAIL PROTECTED]
---
net/ipv4/ipconfig.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index a52b585..10013cc 100644
---
Applied on 2.6.24.2 and up without any problems/warnings since 12 hours.
Thanks,
Jann
-Ursprüngliche Nachricht-
Von: Jarek Poplawski [mailto:[EMAIL PROTECTED]
Gesendet: Montag, 11. Februar 2008 13:43
An: David Miller
Cc: Jann Traschewski; Bernard Pidoux F6BVP; Ralf Baechle
DL5RB;
On 12-02-2008 02:16, David Miller wrote:
From: Stephen Hemminger [EMAIL PROTECTED]
Date: Mon, 11 Feb 2008 16:59:54 -0800
linux-kernel added to CC:, any change to generic kernel infrastructure
should be posted there
Eliminate warnings when rcu_assign_pointer is used with unsigned long.
It
ugly :), but
Acked-by: Denis V. Lunev [EMAIL PROTECTED]
On Mon, 2008-02-11 at 11:48 -0800, Stephen Hemminger wrote:
On Mon, 11 Feb 2008 11:47:17 +0300
Denis V. Lunev [EMAIL PROTECTED] wrote:
net/ipv4/fib_trie.c: In function 'node_set_parent':
net/ipv4/fib_trie.c:184: warning: assignment
On Tue, Feb 12, 2008 at 09:43:26AM +0100, Jann Traschewski wrote:
Applied on 2.6.24.2 and up without any problems/warnings since 12 hours.
Thanks,
Jann
Thanks Jann, too!
BTW, I hope maybe until tomorrow I'll figure out something about those
earlier two AX25 testing patches.
Regards,
Jarek P.
The 2.6.25-rc1 kernel build fails on the powerpc with the error
drivers/net/mlx4/alloc.c: In function ‘mlx4_buf_alloc’:
drivers/net/mlx4/alloc.c:162: error: implicit declaration of function ‘vmap’
drivers/net/mlx4/alloc.c:162: error: ‘VM_MAP’ undeclared (first use in this
function)
On Tue, 12 Feb 2008 01:50:49 -0800 (PST) [EMAIL PROTECTED] wrote:
http://bugzilla.kernel.org/show_bug.cgi?id=9940
Summary: e1000e driver with 82566DM-2 controller doesn't strip
crc from frames
Product: Drivers
Version: 2.5
From: Matti Linnanvuori [EMAIL PROTECTED]
There is a race in Linux kernel file net/core/dev.c, function dev_close.
The function calls function dev_deactivate, which calls function
dev_watchdog_down that deletes the watchdog timer. However, after that, a
driver can call netif_carrier_ok, which
On Feb 12, 2008 9:57 AM, James Bottomley
[EMAIL PROTECTED] wrote:
Added linux-scsi for the SCSI ones
On Tue, 2008-02-12 at 00:18 -0800, Natalie Protasevich wrote:
Hello,
The bugs listed are over a month old, and haven't been addressed yet.
It would be appreciated if corresponding
On Fri, Feb 08, 2008 at 01:07:46PM +0100, Andi Kleen wrote:
On Thu, Feb 07, 2008 at 02:44:46PM -0500, Ross Vandegrift wrote:
On Wed, Feb 06, 2008 at 09:53:57AM +0100, Andi Kleen wrote:
My initial test is end-to-end 1000Mbps, but I've got a few different
packet rates.
If the young/old
On the day of Tuesday 12 February 2008 Krzysztof Halasa hast written:
Hi,
Is it a known problem?
Linux 2.6.24.2, ASUS M2NPV-MX mobo, nforce 430 based, two PCI-E x1
E1000 cards, 32-bit kernel, default e1000 driver (PCI IDs disabled in
e1000e).
Don't work by default. pci=nomsi fixes the
CRC stripping was only correctly enabled for packet split recieves
which is used when receiving jumbo frames. Correctly enable SECRC
also for normal buffer packet receives.
Tested by Andy Gospodarek and Johan Andersson, see bugzilla #9940.
Signed-off-by: Auke Kok [EMAIL PROTECTED]
---
In reply to RE: [Fwd: [PATCH 2.6.25] ixgbe/igb: correctly obtain protocol
information on transmit] from Andy Gospodarek:
The driver was incorrectly looking at socket headers for
protocol information, needed for checksumming offload. Fix
this by not looking at the socket but frame headers instead.
The libertas driver exports a number of symbols with no in-tree
users; remove these unused exports. lbs_reset_device() is completely
unused, with no callers at all, so remove the function completely.
A couple of these unused exported symbols are static, which causes the
following build error on
All the users of hlist_for_each_entry_continue had to intialize pos
before use; change API so pos is a pure temporary variable which matches
the usage of other _for_each_entry routines.
Signed-off-by: Stephen Hemminger [EMAIL PROTECTED]
--- a/include/linux/list.h 2008-02-12
More trie cleanups with some RCU related changes as well.
Patches are against net-2.6 tree.
--
Stephen Hemminger [EMAIL PROTECTED]
--
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info at
Kok, Auke [EMAIL PROTECTED] writes:
Don't work by default. pci=nomsi fixes the problem.
actually does not fix anything - it just works around it by falling
back to legacy interrupts.
Actually it does, fixes the problem by working around a bug :-)
Thanks for info.
--
Krzysztof Halasa
--
To
Roland Dreier wrote:
applied, although:
+static void is_loopback_dst(struct iw_cm_id *cm_id)
+{
+ struct net_device *dev;
+
+ dev = ip_dev_find(init_net, cm_id-remote_addr.sin_addr.s_addr);
+ if (!dev)
+ return 0;
+ dev_put(dev);
+ return 1;
+}
is there any way
From: Stephen Hemminger [EMAIL PROTECTED]
Date: Tue, 12 Feb 2008 16:50:43 -0800
Goofed on last change, should avoid barrier only on rcu_assign_pointer(p,
NULL)
Signed-off-by: Stephen Hemminger [EMAIL PROTECTED]
Like the original change this needs to be merged upstream outside of
the
From: Stephen Hemminger [EMAIL PROTECTED]
Date: Tue, 12 Feb 2008 16:50:46 -0800
All the users of hlist_for_each_entry_continue had to intialize pos
before use; change API so pos is a pure temporary variable which matches
the usage of other _for_each_entry routines.
Signed-off-by:
-Original Message-
From: Marcin Slusarz [mailto:[EMAIL PROTECTED]
Sent: Sunday, February 10, 2008 2:06 AM
To: netdev@vger.kernel.org; Linux Driver
Cc: LKML
Subject: [PATCH resend] qla3xxx: convert byte order of
constant instead ofvariable
convert byte order of constant
Waskiewicz Jr, Peter P wrote:
From: PJ Waskiewicz [EMAIL PROTECTED]
Using strtoul with a base of 16 converts flowid 10 into 0x10,
which makes it flowid 16. This is interpreted by the kernel
incorrectly, and causes traffic flows above 9 to be
classified into band 0 on multiband qdiscs.
This
Andrew Morton wrote:
On Tue, 12 Feb 2008 16:50:44 -0800 Stephen Hemminger [EMAIL PROTECTED] wrote:
Make output format prettier (more tree like).
local:
--- 0.0.0.0/0
|--- 10.111.111.0/24
| +-- 10.111.111.0/32 link broadcast
| |--- 10.111.111.254/31
| | +--
Sorry, can't change the api, update the documentation instead.
Yes, this is much more reasonable. I'll send a patch shortly to do
that.
Thanks
-PJ Waskiewicz
--
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More majordomo info
On Tue, 12 Feb 2008 14:01:32 -0800
PJ Waskiewicz [EMAIL PROTECTED] wrote:
This patch adds the ability for device drivers to control the size of the
TSO frames being sent to them, per TCP connection. By setting the
netdevice's max_gso_frame_size value, the socket layer will set the GSO
frame
This updates the help output to specify that CLASSID should be hexidecimal.
This makes sure that a user entering flowid 1:10 gets his flow put into
band 15 (0x10) and knows why.
Signed-off-by: Peter P Waskiewicz Jr [EMAIL PROTECTED]
---
doc/actions/actions-general |3 +++
tc/f_basic.c
This patch adds the ability for device drivers to control the size of the
TSO frames being sent to them, per TCP connection. By setting the
netdevice's max_gso_frame_size value, the socket layer will set the GSO
frame size based on that value. This will propogate into the TCP layer,
and send
From: PJ Waskiewicz [EMAIL PROTECTED]
Using strtoul with a base of 16 converts flowid 10 into 0x10,
which makes it flowid 16. This is interpreted by the kernel
incorrectly, and causes traffic flows above 9 to be
classified into band 0 on multiband qdiscs.
This changes the base to 10,
From: PJ Waskiewicz [EMAIL PROTECTED]
Using strtoul with a base of 16 converts flowid 10 into 0x10, which makes
it flowid 16. This is interpreted by the kernel incorrectly, and causes
traffic flows above 9 to be classified into band 0 on multiband qdiscs.
This changes the base to 10, which will
On Tue, 12 Feb 2008 16:50:44 -0800 Stephen Hemminger [EMAIL PROTECTED] wrote:
Make output format prettier (more tree like).
local:
--- 0.0.0.0/0
|--- 10.111.111.0/24
| +-- 10.111.111.0/32 link broadcast
| |--- 10.111.111.254/31
| | +-- 10.111.111.254/32 host
Hi!,
Appropriately handle sockets with sk = NULL. This is usually the socket
case when starting kernel nfsd.
Signed-off-by: Ahmed S. Darwish [EMAIL PROTECTED]
Acked-by: Casey Schaufler [EMAIL PROTECTED]
Tested-by: Joerg Platte [EMAIL PROTECTED]
--
diff --git a/security/smack/smack_lsm.c
Goofed on last change, should avoid barrier only on rcu_assign_pointer(p, NULL)
Signed-off-by: Stephen Hemminger [EMAIL PROTECTED]
---
include/linux/rcupdate.h | 13 +++--
1 files changed, 7 insertions(+), 6 deletions(-)
--- a/include/linux/rcupdate.h 2008-02-12 14:46:49.0
From: maximilian attems [EMAIL PROTECTED]
Date: Tue, 12 Feb 2008 11:30:47 +0100
irda_init()
dmesg line is not really informative, thus remove it.
There are better ways to know that a module is loaded.
Seen on a debian config with IRDA_DEBUG enabled.
Signed-off-by: maximilian attems
From: Matti Linnanvuori [EMAIL PROTECTED]
Date: Tue, 12 Feb 2008 02:45:22 -0800 (PST)
From: Matti Linnanvuori [EMAIL PROTECTED]
There is a race in Linux kernel file net/core/dev.c, function dev_close.
The function calls function dev_deactivate, which calls function
dev_watchdog_down that
applied, although:
+static void is_loopback_dst(struct iw_cm_id *cm_id)
+{
+struct net_device *dev;
+
+dev = ip_dev_find(init_net, cm_id-remote_addr.sin_addr.s_addr);
+if (!dev)
+return 0;
+dev_put(dev);
+return 1;
+}
is there any way this
From: Herbert Xu [EMAIL PROTECTED]
Date: Wed, 13 Feb 2008 11:04:37 +1100
[IPV6]: Fix IPsec datagram fragmentation
This is a long-standing bug in the IPsec IPv6 code that breaks
when we emit a IPsec tunnel-mode datagram packet. The problem
is that the code the emits the packet assumes the
Hi Dave:
[IPV6]: Fix IPsec datagram fragmentation
This is a long-standing bug in the IPsec IPv6 code that breaks
when we emit a IPsec tunnel-mode datagram packet. The problem
is that the code the emits the packet assumes the IPv6 stack
will fragment it later, but the IPv6 stack assumes that
fgnijuhhu guduggurehug [EMAIL PROTECTED] :
fgnijuhhu guduggurehug :
[...]
I already posted my problem and what I did to solve it on
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=461429.
Have you tried anything more recent than a 2.6.18 based kernel ?
No, but if changes were made
Prakash Punnoor wrote:
On the day of Tuesday 12 February 2008 Krzysztof Halasa hast written:
Hi,
Is it a known problem?
Linux 2.6.24.2, ASUS M2NPV-MX mobo, nforce 430 based, two PCI-E x1
E1000 cards, 32-bit kernel, default e1000 driver (PCI IDs disabled in
e1000e).
your card will work with
RDMA/cxgb3: Fail loopback connections.
The cxgb3 HW and driver don't support loopback RDMA connections. So fail
any connection attempt where the destination address is local.
Signed-off-by: Steve Wise [EMAIL PROTECTED]
---
drivers/infiniband/hw/cxgb3/iwch_cm.c | 16
1
From: Natalie Protasevich [EMAIL PROTECTED]
Date: Mon, 11 Feb 2008 12:49:12 -0800
Possible reason for this failure was identified and tested by the
submitter and several other reporters that ran into the same problem.
Can the patch be reviewed and pushed upstream if accepted (if the
problem
On Tue, Feb 12, 2008 at 08:07:29AM -0800, Paul E. McKenney wrote:
...
All programmers are blind, especially me.
Hmm... I got it my way: you - superheroes - sometimes seem to be just
like us - common people... (Probably early in the morning, before
dressing your funny costumes?)
You are right,
From: James Chapman [EMAIL PROTECTED]
Date: Tue, 12 Feb 2008 10:58:21 +
Here is a trace from when we had _bh locks.
The problem is that the pppol2tp code calls sk_dst_get() in software
interrupt context and that is not allowed.
sk_dst_get() grabs sk-sk_dst_lock without any BH enabling or
On Mon, 2008-02-11 at 17:24 +0100, Jan-Bernd Themann wrote:
Drivers like eHEA need memory notifiers in order to
update their internal DMA memory map when memory is added
to or removed from the system.
Patch for eHEA memory hotplug support that uses these functions:
On Feb 12, 2008 9:49 PM, David Miller [EMAIL PROTECTED] wrote:
From: Natalie Protasevich [EMAIL PROTECTED]
Date: Mon, 11 Feb 2008 12:49:12 -0800
Possible reason for this failure was identified and tested by the
submitter and several other reporters that ran into the same problem.
Can the
Added linux-scsi for the SCSI ones
On Tue, 2008-02-12 at 00:18 -0800, Natalie Protasevich wrote:
Hello,
The bugs listed are over a month old, and haven't been addressed yet.
It would be appreciated if corresponding maintainers identify whether
the bugs have been fixed, or need to be worked
I've been further enhancing the netperf omni tests to enable reporting
stuff like uname for local/remote, the name of the probable egress
interface (rtnetlink), and then driver information for that interface.
I figure that such information being spat-out by netperf might be useful
to have if
Hi,
Is it a known problem?
Linux 2.6.24.2, ASUS M2NPV-MX mobo, nforce 430 based, two PCI-E x1
E1000 cards, 32-bit kernel, default e1000 driver (PCI IDs disabled in
e1000e).
Don't work by default. pci=nomsi fixes the problem.
82572EI Gigabit Ethernet Controller (Copper) (rev 06)
Subsystem:
On Monday 11 February 2008 7:00:33 pm Casey Schaufler wrote:
This patch differs significantly from the previous version.
I think that I am using the netlbl interfaces more appropriately,
Paul, please let me know if there's a better approach.
Nope, this approach is what I was talking about.
Daniel Drake wrote:
Johan Andersson reported on the Gentoo bugzilla that the hardware CRC
stripping enabled by e1000e breaks bridging because sometimes the CRC is
not stripped:
https://bugs.gentoo.org/show_bug.cgi?id=209235
Apparently upstream are aware but I couldn't find any mails or bug
On Tue, Feb 12, 2008 at 02:57:50PM +0100, Johan Andersson wrote:
Here is the bug report:
http://bugzilla.kernel.org/show_bug.cgi?id=9940
/Johan
On Tue, 2008-02-12 at 13:27 +, Daniel Drake wrote:
Hi,
Johan Andersson reported on the Gentoo bugzilla that the hardware CRC
From: Urs Thuermann [EMAIL PROTECTED]
Date: 10 Feb 2008 10:48:07 +0100
Fix comment for skb_pull_rcsum
Signed-off-by: Urs Thuermann [EMAIL PROTECTED]
Applied, thanks.
--
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a message to [EMAIL PROTECTED]
More
From: Urs Thuermann [EMAIL PROTECTED]
Date: 10 Feb 2008 10:48:51 +0100
So what is your opinion about this change?
No general objections from me.
But if libpcap and tcpdump can already identify PPP packets
then, besides consistency, what does this buy us other
than potential breakage?
--
To
The genl_unregister_family() calls the genl_unregister_mc_groups(),
which takes and releases the genl_lock and then locks and releases
this lock itself.
Relax this behavior, all the more so the genl_unregister_mc_groups()
is called from genl_unregister_family() only.
I'm not sure, whether this
From: Paul Moore [EMAIL PROTECTED]
Date: Tue, 12 Feb 2008 11:34:09 -0500
On Tuesday 12 February 2008 11:27:16 am Pavel Emelyanov wrote:
Currently, if the call to netlbl_domhsh_search succeeds the
return result will still be NULL.
Fix that, by returning the found entry (if any).
From: Pavel Emelyanov [EMAIL PROTECTED]
Date: Tue, 12 Feb 2008 20:16:13 +0300
The genl_unregister_family() calls the genl_unregister_mc_groups(),
which takes and releases the genl_lock and then locks and releases
this lock itself.
Relax this behavior, all the more so the
On Tue, Feb 12, 2008 at 03:20:24PM -0800, Auke Kok wrote:
CRC stripping was only correctly enabled for packet split recieves
which is used when receiving jumbo frames. Correctly enable SECRC
also for normal buffer packet receives.
Tested by Andy Gospodarek and Johan Andersson, see bugzilla
Make output format prettier (more tree like).
local:
--- 0.0.0.0/0
|--- 10.111.111.0/24
| +-- 10.111.111.0/32 link broadcast
| |--- 10.111.111.254/31
| | +-- 10.111.111.254/32 host local
| | +-- 10.111.111.255/32 link broadcast
|--- 127.0.0.0/8
|
From: Pavel Emelyanov [EMAIL PROTECTED]
Date: Thu, 07 Feb 2008 20:20:30 +0300
The audit_log_start() will expand into an empty do { } while (0)
construction and the audit_ctx becomes unused.
The solution: push current-audit_context into audit_log_start()
directly, since it is not required in
From: Pavel Emelyanov [EMAIL PROTECTED]
Date: Thu, 07 Feb 2008 20:24:15 +0300
Some code declares variables on the stack, but uses them
under #ifdef CONFIG_IPV6, so thay become unused when ipv6
is off. Fortunately, they are used in a switch's case
branches, so the fix is rather simple.
Is
Kok, Auke wrote:
Jesse figured it out. I just send you a patch to test, can you guys give that a
try and see if it fixes the situation? Johan?
thanks,
Auke
Yes, I will test this patch right away.
/Johan
--
To unsubscribe from this list: send the line unsubscribe netdev in
the body of a
From: Pavel Emelyanov [EMAIL PROTECTED]
Date: Thu, 07 Feb 2008 20:25:52 +0300
This one is called from under this config only, so move
it in the same place.
Signed-off-by: Pavel Emelyanov [EMAIL PROTECTED]
Applied.
--
To unsubscribe from this list: send the line unsubscribe netdev in
the
On Tue, Feb 12, 2008 at 08:32:18PM +0100, Jarek Poplawski wrote:
...
It seems the above version of this macro uses the barrier for 0, but
if I miss something, or for these other: documenting reasons,
...or __builtin_constants could be used for indexing (?!),
then of
course you are right.
Hey everyone,
[I'm not subscribed, so please CC me on any replies]
I've attached a patch that changes the order of the ACK and RST checking
in the LISTEN state in tcp_rcv_state_process() in tcp_input.c
Before: If an ACK/RST packet is received, then tcp_rcv_state_process()
would return 1
From: Rami Rosen [EMAIL PROTECTED]
Date: Sun, 10 Feb 2008 18:40:13 +0200
This patch removes unused declaration of dflt_rt_lookup() method in
include/net/ndisc.h
Signed-off-by: Rami Rosen [EMAIL PROTECTED]
Applied, thanks.
--
To unsubscribe from this list: send the line unsubscribe netdev in
Currently, if the call to netlbl_domhsh_search succeeds the
return result will still be NULL.
Fix that, by returning the found entry (if any).
Signed-off-by: Pavel Emelyanov [EMAIL PROTECTED]
---
diff --git a/net/netlabel/netlabel_domainhash.c
b/net/netlabel/netlabel_domainhash.c
index
From: Laszlo Attila Toth [EMAIL PROTECTED]
Date: Thu, 7 Feb 2008 12:57:50 +0100
In do_setlink() a single notification is sent at the end of the function
if any modification occured. If the address has been changed, another
notification is sent.
Both of them is required because originally
Ben Dooks wrote:
These two where meant to be from Laurent Pinchart, they do have
the correct signed-off lines in for him and start with Patch from:. Is
there any chance of fixing the authour attribution now?
The first line of the changeset mentions it. Other than that, nope.
Jeff
Matti Linnanvuori wrote:
From: Matti Linnanvuori [EMAIL PROTECTED]
There is a race in Linux kernel file net/core/dev.c, function dev_close.
The function calls function dev_deactivate, which calls function
dev_watchdog_down that deletes the watchdog timer. However, after that, a
driver can call
From: Herbert Xu [EMAIL PROTECTED]
Date: Sun, 3 Feb 2008 11:20:19 +1100
[IPSEC]: Fix bogus usage of u64 on input sequence number
Al Viro spotted a bogus use of u64 on the input sequence number which
is big-endian. This patch fixes it by giving the input sequence number
its own member in
From: Herbert Xu [EMAIL PROTECTED]
Date: Mon, 4 Feb 2008 09:00:27 +1100
On Sun, Feb 03, 2008 at 11:04:44AM +, Al Viro wrote:
IMO that at least deserves a comment near xfrm_input()...
Sure. There is already a comment about encap_type 0 in there, but
I think you'll probably be able to
From: Timo_Teräs [EMAIL PROTECTED]
Date: Fri, 01 Feb 2008 16:58:04 +0200
@@ -1780,6 +1786,7 @@ static int check_reqid(struct xfrm_policy *xp, int dir,
int count, void *ptr)
static u32 gen_reqid(void)
{
+ struct xfrm_policy_walk walk;
u32 start;
static u32 reqid =
Here is the bug report:
http://bugzilla.kernel.org/show_bug.cgi?id=9940
/Johan
On Tue, 2008-02-12 at 13:27 +, Daniel Drake wrote:
Hi,
Johan Andersson reported on the Gentoo bugzilla that the hardware CRC
stripping enabled by e1000e breaks bridging because sometimes the CRC is
not
Hi,
Johan Andersson reported on the Gentoo bugzilla that the hardware CRC
stripping enabled by e1000e breaks bridging because sometimes the CRC is
not stripped:
https://bugs.gentoo.org/show_bug.cgi?id=209235
Apparently upstream are aware but I couldn't find any mails or bug
reports on this
fgnijuhhu guduggurehug :
[...]
I already posted my problem and what I did to solve it on
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=461429.
Have you tried anything more recent than a 2.6.18 based kernel ?
No, but if changes were made to the iniatialization of the chipset in the
On Tue, Feb 12, 2008 at 10:58:21AM +, James Chapman wrote:
...
Here is a trace from when we had _bh locks.
Very nice...
...But since it's quite long, and if you don't know all these paths
this could take some time, maybe one question: so if lockdep got these
locks right (sometimes it can be
From: Matti Linnanvuori [EMAIL PROTECTED]
There is a race in Linux kernel file net/core/dev.c, function dev_close.
The function calls function dev_deactivate, which calls function
dev_watchdog_down that deletes the watchdog timer. However, after that, a
driver can call netif_carrier_ok, which
From: Kris Katterjohn [EMAIL PROTECTED]
Date: Wed, 13 Feb 2008 00:38:13 -0600
I've attached a patch that changes the order of the ACK and RST checking
in the LISTEN state in tcp_rcv_state_process() in tcp_input.c
Before: If an ACK/RST packet is received, then tcp_rcv_state_process()
From: Matti Linnanvuori [EMAIL PROTECTED]
Date: Tue, 12 Feb 2008 23:06:41 -0800 (PST)
There is a race in Linux kernel file net/core/dev.c, function dev_close.
The function calls function dev_deactivate, which calls function
dev_watchdog_down that deletes the watchdog timer. However, after
On Mon, Feb 11, 2008 at 12:05:16PM -0500, Jeff Garzik wrote:
Mostly fixes, a few cleanups (generally assisting fixes), and an
exception for PS3 wireless because it had been posted, reviewed and
acked for a while, just not committed.
Thanks, good to get the DM9000 changes moving.
Please pull
From: Neil Turton [EMAIL PROTECTED]
Date: Thu, 17 Jan 2008 11:04:44 +
Move the ingress qdisc members of struct net_device from the transmit
cache line to the receive cache line to avoid cache line ping-pong.
These members are only used on the receive path.
Signed-off-by: Neil Turton
David Miller wrote:
From: James Chapman [EMAIL PROTECTED]
Date: Mon, 11 Feb 2008 23:41:18 +
Jarek Poplawski wrote:
On Mon, Feb 11, 2008 at 10:19:35PM +, James Chapman wrote:
...
Below is example output from lockdep. The oops is reproducible when
creating/deleting lots of sessions
On Mon, Feb 11, 2008 at 11:42:12PM +, James Chapman wrote:
Jarek Poplawski wrote:
On Mon, Feb 11, 2008 at 11:49:24PM +0100, Jarek Poplawski wrote:
On Mon, Feb 11, 2008 at 10:19:35PM +, James Chapman wrote:
...
Below is example output from lockdep. The oops is reproducible when
irda_init()
dmesg line is not really informative, thus remove it.
There are better ways to know that a module is loaded.
Seen on a debian config with IRDA_DEBUG enabled.
Signed-off-by: maximilian attems [EMAIL PROTECTED]
---
net/irda/irmod.c |2 --
1 files changed, 0 insertions(+), 2
In article [EMAIL PROTECTED] (at Thu, 07 Feb 2008 10:40:19 +0100), Eric
Dumazet [EMAIL PROTECTED] says:
[NET] IPV4: lower stack usage in cookie_hash() function
400 bytes allocated on stack might be a litle bit too much. Using a
per_cpu var is more friendly.
Signed-off-by: Eric Dumazet
On Tue, Feb 12, 2008 at 08:57:14AM +, Jarek Poplawski wrote:
On 12-02-2008 02:16, David Miller wrote:
From: Stephen Hemminger [EMAIL PROTECTED]
Date: Mon, 11 Feb 2008 16:59:54 -0800
linux-kernel added to CC:, any change to generic kernel infrastructure
should be posted there
On Tuesday 12 February 2008 11:27:16 am Pavel Emelyanov wrote:
Currently, if the call to netlbl_domhsh_search succeeds the
return result will still be NULL.
Fix that, by returning the found entry (if any).
Signed-off-by: Pavel Emelyanov [EMAIL PROTECTED]
Good catch, thanks.
Acked-by: Paul
On Tue, Feb 12, 2008 at 10:00:03PM -0800, David Miller wrote:
From: James Chapman [EMAIL PROTECTED]
Date: Tue, 12 Feb 2008 10:58:21 +
Here is a trace from when we had _bh locks.
The problem is that the pppol2tp code calls sk_dst_get() in software
interrupt context and that is not
89 matches
Mail list logo
