Davide Cavallari wrote:
Ho bisogno di utilizzare un dizionario della Garzanti che gira solo su
Windowz :-(
Qualcuno di voi sa consigliarmi un emulatore di win per linux in modo
che mi sia possibile utilizzare in qualche maniera questo dizionario?
Veri emulatori non esistono.
Ci sono due
gabriele s wrote:
Puoi provare a lanciare wine, ma consideralo al più
come un simpatico
esperimento...
ecco, ma come si fa? a me dice che il file di
configurazione non va bene, una volta ha detto che non
era nella cratella giusta, l'ho spostato, ma non
funzia lo stesso
magari non è
Matteo Merlin wrote:
Ciao, ho appena finito di scaricare l'immagine MANDRAKE71-INST.ISO.
Ma appena verificato il checksum con md5sum non ho ottenuto il risultato
sperato... :(
infatti la chiave presente sul file md5sums che ho prelevato dalla
directory del server ftp.unina.it non
= Original Message from Merz Luca [EMAIL PROTECTED] at
22/06/00 15.09
Ciao a tutti,
ho un piccolo problema, ho installato il suddetto server x sulla MDK 7.1, ma
si ostina a non voler partire.
Mi da FATAL ERROR perchè non trova il font 'fixed'.
Io ho provato a cercarlo ovunque ma pare proprio
On Mon, Jun 26, 2000 at 10:48:15AM +0200, Andrea Celli wrote:
Hai senz'altro qualche file corrotto.
Quale/i, quanti? Impossibile dirlo.
Se sei fortunato e` il solitario, se ti dice male e' il kernel o il
file-system o qualche altra componente essenziale che ti puo' lasciare
a terra quando
salve a tutti
avrei bisogno di aiuto per configurare una rete gia' funzionante con
w**.
sono due pc con schede di rete 10 mb con cavo incrociato, le schede
sono gia' attive
in mandrake 7.0.
ip 192.168.1.1 - 192.168.1.2
con il comando ping le schede rispondono correttamente, ma con samba
Ho tentato di installare Linux RedHat6.1 e Mandrake7.0 sul mio computer:
mainboard dotata di chipset di sistema Intel Corporation 82437VX 430VX
System Controller, processore Intel Petium 200 MHz, 16 MByte di memoria,
scheda video Cirrus Logic GD-5446 rev0 con chipset Cirrus 54xx (B8); la
lun, 26 giu 2000, hai scritto:
Puoi provare a lanciare wine, ma consideralo al più
come un simpatico
esperimento...
ecco, ma come si fa? a me dice che il file di
configurazione non va bene, una volta ha detto che non
era nella cratella giusta, l'ho spostato, ma non
funzia lo stesso
Hi
When you mount a cd u mast use "mount /mnt/cdrom"
Ronald
-Original Message-
From: Ace Frehley [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 26, 2000 7:37 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] 7.1 Install: "could not mount CD on /dev/scd0"
using Adaptec 1542cf
On Sun, 25
Hi,
i bought a D-Linkk DFE 650 TX (PCMCIA-Card). After installing
Mandrake 7.0 the Card works, but in the "netconf"-Option of
"linuxconf" there is no module selected. Can anybody give me an
advice wich module is in use?
Thorsten
Thanks for the correction, I will continue to use PM anyway. I AM a
newbie and was under the impression that the fdisk that came with dos
and windows was a diferent creature than the fdisk that came with
mandrake or other linux distros.
Eric MC DECLERCK wrote:
I'm sorry, but I can't agreed
Joe and Sfactor
You both had questions regarding setting up your PCI modem. The
procedures you need to follow are the same for all PCI modems.
Sfactor the only setting in the BIOS that you need to check is Plug and
Play Setup. The first listing should read something like PnP OS. This should
Tony
I have about run out of suggestions. If you have a DOS floppy you might
try using fdisk to formatt you drive. The Mandrake install should be able to
read and work with it. You might also try to run the installation in Expert
or Custom mode and see if it will overwrite the WD partition
|-Original Message-
|From: Walter Hanagriff [mailto:[EMAIL PROTECTED]]
|Sent: Saturday, June 24, 2000 4:19 AM
|To: [EMAIL PROTECTED]
|Subject: [newbie] Dont understand mandrake install
|
|
|first, is there a way to get a digest of this mailing list?
|
Yes see the original signup
Could someone please explain to me why when I use fetchmail to get the
mail from my ISP it's getting it and depositing in
/var/spool/postfix/deferred instead of putting it in
/var/spool/mail/$USER
where Pine can access it and I can read it? This is driving me crazy!
Please help before they come
Hi there!
Has anyone a comment regarding use of Promise Ultra 66 card under Mandrake
7.0 or 7.1 release? Especially for the new installation...
Best regards - Janis
Jancs
Laps Cileecish
http://www.ktf.rtu.lv/jancs/
On Mon, Jun 26, 2000 at 09:16:54AM -0400, Mark Weaver wrote:
Could someone please explain to me why when I use fetchmail to get the
mail from my ISP it's getting it and depositing in
/var/spool/postfix/deferred instead of putting it in
/var/spool/mail/$USER
where Pine can access it and I can
Just installed Mandrake 7 this weekend - the install
went rather smooth (had to do it twice) - but those
were errors on my part.
I have an Intel 810 video card with AGP - and cannot
seem to get the resolution or graphics just right with
it. I have looked on some news groups and found
others
Ok. I tried this and I don't have a winmode. My
modem is listed as a Communications Controller. I
followed your instructions and recieved no errors. But
when I try to query the modem KPPP says "Sorry the
modem is busy!". any suggestions?
Sfactor (SJ)" wrote:
I was the one asking about
I had and have a similar problem. What about if you run ifconfig -a, does it
show the Eth1 and Eth0, but the Eth0 says "UP BROADCAST" and the Eth1 Says"
Broadcast." I have experienced that on both my Linux machines. I fixed one
by changing the BIOS, but the other computer is quite
"Sfactor (SJ)" [EMAIL PROTECTED] wrote:
I was the one asking about the modem on Com5. Well, it worked! Thank you so
much. I got it to connect fine. I have a few questions, now that I've found
someone that knows what he's doing.
When I connect, it said "logging on to network", I remember this
Yes both NIC's show up in "ifconfig" with what looks like all the correct
info...ie IP/Netmask/BroadCast adresses yet eth1 doesn't light up the hub
send/rec light(s)
[EMAIL PROTECTED] wrote:
I had and have a similar problem. What about if you run ifconfig -a, does
it
show the Eth1 and Eth0,
Even though I am also a newbie, I can try helping you.
What modem do you have? there is a page, mirrored by many, that has a huge
listing of modems ( can not think of it offhand, do a google search for
linux compatible modems or somethign ) and their compatibility with linux.
If it really isn't a
You mentioned that to make the changes, I would have to add
those two lines to the end of /etc/rc.d. That is a directory with
several
files and folders,
They have to be added to your rc.local file which is in that directory.
Glad you got yours running. I have to say that I tried the same
I have seen this problem mentioned but hane yet to see a posted solution.
I have a NEC versa 4050H in a docking station that I am trying to get mandrake
7.1 installed onto. There is an ne2000 compatible d-link D220 ethernet card
in the docking bay using resources 0x300 and IRQ 10.
I have
If it's already working take a look at the /etc/modules.conf file to
see what alias it's using.
I have the same pcmcia card and in when I configured networking I had
to add it manually; it's the 'pcnet_cs' module.
good luck
Eunice
Hi,
If I choose Korean language when I install Mandrake-Linux,
what kind of difference does my selection make on the final
installed linux?
Is it just that Korean fonts are installed as a primary font,
or is it more than that?
Thanks in advance.
sungpil
Janis,
I am also running a PCI Promise Ultra66 IDE Controller card. I had to feed
the I/O numbers to the kernel in order to install MDK 7.0.
MDK 7.1 and the Promise Ultra66 finally got married. Installing Mandrake
7.1 onto a hard drive connected to a Promise Ultra66 IDE controller was a
I am using Mandrake 7.1
Somehow I did something to my linux box and now I don't have the penguins on
the login screen. I am reffering to the penguins that represent each user. I
used to have a root penguin and my username penguin on this screen. I can
still login just fine the only difference
Hi list,
I'm having a little problem. I try to use the lib libXm.so.0 , but my
system can't find it even if it is there. The is in /usr/X11R6/lib and
is a link to libXm.so.6 .
I tried to execute
/sbin/ldconfig
and it didn't solve the problem... and the path /usr/X11R6/lib
30 matches
Mail list logo