Here is what I did.
I installed the development version of Mandrake. I couldn't ever get it to
compile until some kind soul recommended installing the development version
*always* since most things that you would want to use need to be compiled
and without the appropriate support tools that are
Thanks for the input. This is pretty much what I did to make it work: (for
others having the same problem)
In my modules.conf file I added:an: alias eth0 3c90x
-Nick
- Original Message -
From: "Greg Stewart" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, July 23, 2000 3:54
hey joe,
the easiest, and cheapest firewall for windows ive found can be
downloaded from www.grc.comits called zone alarm ive had it
running on my windows partition of this 'puter for as long as its been out and
has worked great! (before i installed i never knew how many
Dennis,
I had this problem too when I first set up my network... My solution was
I had incorrectly typed the IP address in under my TCP/IP properties for my
network card. After I fixed this, I was able to ping perfectly. Hope this
helps.
- Joe :)
Can't get Mandrake 7.1 to find AWE32. Corel 1.1 (2.2.14) does find awe32 and
also ATI All-in-Wonder 128 and 3com 3c905TX. Mandrake 7.1 finds 3com and
ATI. Any suggestions would be appreciated. Platform is an Abit BP6, Dual
Celerons 366MHz, 128 MEG. Corel drive on ide1, DMA 33. Mandrake on ide3
I have had a disappearing NIC in DrakConfig before...specifically the 3COM
3C509, the other NIC was a 3COM 3C503, but it was listed. Funny thing
is...they BOTH worked correctly, well with the exception of the internal
network card NOT broadcasting to my hub (I was trying to setup a cable modem
I have been having trouble installing 7.1 from CD.
Dell P166MMX
Toshiba XM-6502B ATAPI cd-rom
The bios won't let me boot from CD, so I had to boot from floppy.
Everything goes well until it's time to change CDs. The drawer won't open
on the drive.
If I choose Cancel, the install finishes
Torrey
My reference to installing Lilo on hdc was if you were using SC to boot
your OSes not if you were going to use Lilo to do so and even then you have
to manually add it to SC.
I also have a triple boot system. My main boot loader is Grub. It gives
me the boot options of linux, safe,
Looks like I need to use 3c575_cb for my 3com PC card and it is on
neither the 7.0 or 7.1 Mandrake install. I have located the source
for it, but have no idea what to do to make use of it. Symptom is
network connections that fail after a few minutes, sometimes even
seconds. The card is a
Hello all Tux devotees,
I have a NVidia TNT2 card that is setup on Mandrake 7.1. It is a 32
MB card. Yet, upon looking at the memory (in DrakConf I think),
mandrake shows, it to say 4096. Is there a file in X.config that I can
edit to increase the size to what it should be, so that I can get
Hi everyone,
I have decided to give XFCE a go as window manager.
LOVE IT!
It is fast, easy, runs exactly the way I want it already, and I have not
even done a lot of customizing.
I had to change my ICQ program from KxICQ to Licq (kxicq keeps complaining
that it can't find it's pid-file), but
On Sun, 23 Jul 2000, Dacia and AzureRose wrote:
Yes, apple sued microsoft in the early 80's for
stealing the GUI from them but microsoft argued
successfully that GUI is the future of computing and
as such copyrighting it is akin to trying to copyright
"book" or "magazine". This ruling is
On Sun, 23 Jul 2000, Joe Brault wrote:
Thanks everyone for the previous advice, PMFirewall sounds like the way to
go! I do have one more question... Since I will be using both Winbloze and
Linux, should I put the PMFirewall on a separate Linux Box and run my
Ethernet connection thru that,
On Sun, 23 Jul 2000, mrc wrote:
Are Linux drivers available for using Fuji Digital Camera picture development
or must one stay with Windoze?
Michael Coady
There's a package callled Gphoto, which should work for you.
www.gphoto.org, and it is on the mdk7x cd's also.
Paul
--
Promise, large
On Sun, 23 Jul 2000, Charles A Edwards wrote:
send a mail to [EMAIL PROTECTED]
with in the body text just the word unsubscribe
If that still seems to hard. :-) go to the Mandrake List page, enter your
e-mail address, select Newbie and check unsubscribe and in 30 sec we will be
history.
I
If you guys wanna know how PARC Engineers built the Xerox Alto, how Steve
Jobs "acquired" the design, and how microsoft stole it...
http://www.applemuseum.seastar.net/sections/gui.html
There's everything you want to know about how the GUI was born. Including
it's conception in 1945.
-Darkeyes
I'm not sure which file gets changed but Xconfigurator will allow you to
change it as will linuxconf or webmin. It's one of the files in /etc/rc.d
and you need to change the runlevel.
Regards,
Ran Hooper
[EMAIL PROTECTED]
-Original Message-
From: linus nuby [mailto:[EMAIL PROTECTED]]
Have you tried other terminals eg by pressing ctrl-alt-F1, ctrl-alt-F2,
etc?
Original Message
On 7/24/00, 7:38:51 AM, linus nuby [EMAIL PROTECTED] wrote regarding
[newbie] boot to console:
I just loaded 7.1 and chose for it to boot into GUI. How can I boot to
and/or power down to
Have you tried other terminals eg by pressing ctrl-alt-F1, ctrl-alt-F2,
etc?
Original Message
On 7/24/00, 7:38:51 AM, linus nuby [EMAIL PROTECTED] wrote regarding
[newbie] boot to console:
I just loaded 7.1 and chose for it to boot into GUI. How can I boot to
and/or power down to
I temporary solution is when LILO comes up, type in "linux 3" w/o quotes. A
more permenant solution would be to change the "id:5:initdefault:"
line in /etc/inittab to "id:3:initdefault:"
I just loaded 7.1 and chose for it to boot into GUI. How can I boot to
and/or power down to console mode?
On Sun, 23 Jul 2000, you wrote:
I have been visiting www.grc.com for quite some time under Windoze98 checking it
out. Steve's site is wonderful -- if you use Windoze98 or such, you should check it
out explore some of the software Steve recomends. I have not been there under
Linux
Hello,
I am new to the list, and looking forward to reading everyone's comments.
I have a problem with Mandrake 7.0.
I have two harddrives, one with Windows and the other Linux. When I am
retrieving email in Netscape (Windows), everything is great, and mail downloads
as it should. However,
On Sat, 22 Jul 2000, you wrote:
counterparts. Nothing available can touch Outlook and Outlook express.
Have you heard of the latest security issue with Outlook. Anybody sending you
mail can run their code on your machine when you open the email. It has
something to do with Outlook's ActiveX
Hi
Goto to DrakConf in you Configuration - Menu and run the X-Server
Configuration(Should be the first option. When it asks if you want to boot
to GUI say no and reboot. It worked for me.
Kim
- Original Message -
From: linus nuby [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday,
On Sat, 22 Jul 2000, you wrote:
Hi!
When I install linux over an old installation (no upgrade), will the partition
with /home also be affected?
Is your Linux installation all in one partition? If it is then it is affected.
But if /home is in another partition you can opt not to format that
Hi,can anybody tell me how to run Webmin on Mandrake 7.1.Thanks in advanceThorsten
I have a similar problem. Also have 7.1 CD package and can't boot from CD - the
bios setting doesn't work. I have uninstalled PnP. As far as I can get is
"detecting CD ROM" and the "loading second image" message. The computer then
reboots into Windows or goes through the same thing again if i use
Thanks, very interesting! The guy who thought up the concept of GUI - Vannevar
Bush - also wrote an article called "As we may think" (or sth similar) in which
he set out the idea of "hypertext".
Really ahead of his time...
Brian
Nickolas Koehne wrote:
If you guys wanna know how PARC
On 23 Jul 00, at 19:25, linus nuby wrote:
I have been having trouble installing 7.1 from CD.
Dell P166MMX
Toshiba XM-6502B ATAPI cd-rom
The bios won't let me boot from CD, so I had to boot from floppy.
Everything goes well until it's time to change CDs. The drawer won't open
on the
As root type /usr/sbin/sndconfig and ignore the warning
PS if this doesn't work check the directory. I don't have 7.1
Good luck,
Adriaan Barel
- Original Message -
From: "Bill Wright" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 24, 2000 10:59 PM
Subject: [newbie] Sound
Edit the file /etc/inittab.
Find the line: id:5:initdefault:
Change the 5 (which specifies starting in X) to 3 (which specifies console).
The number is actually the runlevel which Linux boots into. Runlevel 3 is
console, multi-user; runlevel 5 is X.
Chris Slater-Walker
- Original
As root type /usr/sbin/sndconfig and ignore the warning
Good luck,
Adriaan Barel
- Original Message -
From: "Bill Wright" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 24, 2000 10:59 PM
Subject: [newbie] Sound Card CFG
I running mandrake 7.1 .. how to I enter the
I had the exact same situation. It detected all my hardware except sound.
Open a console and type sndconfig (enter). Solved my problem.
Jeff Malka [EMAIL PROTECTED]
Registered (Newbie) Linux user 183185
- Original Message -
From: Bill Wright [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
unsubscribe
Hi Greg,
Thanks for answering. I checked the specified files and found this entry
in ip-up.local [ -x /usr/local/pmfirewall/pmfirewall ]
/usr/local/pmfirewall/pmfirewall start
I'm a little confused as to why, since this command is clearly in there,
why it's not following it.
--
Mark
First of all, fdisk /mbr wouldn't fix the damage that the installer had
done. I got an invalid media type on drive c:. The directories
wouldn't list. Norton 2000 wouldn't fix it either. How do you figure
it is user error, when GRUB wiped my mbr and it wasn't repairable. I
tried all to get
subject: Email Security through Procmail 1.113
added by: John Hardin on Jul 23rd 2000, 13:09
license: GPL
category: Console/Firewall and Security
homepage: http://freshmeat.net/redir/homepage/909922332/
download: http://freshmeat.net/redir/download/909922332/
description: Email
On Mon, 24 Jul 2000, Roderick F.Lazaro wrote:
On Sat, 22 Jul 2000, you wrote:
counterparts. Nothing available can touch Outlook and Outlook express.
Have you heard of the latest security issue with Outlook. Anybody sending you
mail can run their code on your machine when you open the email. It
On Sun, 23 Jul 2000, Tom Brinkman wrote:
/. on a regular basis Just a week ago there was a story 'bout
not even needing to open an email with Winblows any more to get
infected, just d/l'ing it to a windoze connection an' you're toast.
Sometimes they're stupid also. This morning someone
I have got an internal LS120 (in place of my floppy) it works fine under kde
when I access ext2 "formatted" floppies, but if I try to mount vfat or msdos I
get a kfm error message that says "only root can do this" I can access vfat or
msdos as root or su as a user and mount -t . from a
Hi Tom,
First I would check to make sure that the firewall was indeed operating
checking to see if I could get traffic up and downstream. So I would
just do a ping. That's what tipped me off in the first place that
something wasn't right. I couldn't get any traffic going either
direction.
Then,
I've attempted to install a couple of games (Quake bfris) and both
tell me they need libglide2x.so. Is this related to my video card? (ATI
Rage Fury Maxx) and if so where can I get this file? I'm very new to
Linux so if more info is needed please let me know.
Thanks in advance
Steve
--
I just installed 7.1 and was disappointed that all my important apps
were missing. This leads me to wonder why the installation process was
asking me for an "applications" CD. Are these the extra discs that you
can only get from the package? May I also confirm that you only get two
discs if
Thanks everyone for your help with my mail retrieval problem. I made
the suggested changes, and I think that everything is working fine now!
Melinda Shoop
Yes, it works. I used it about 2 weeks ago when I went on vacation.
If that still seems to hard. :-) go to the Mandrake List page, enter your
e-mail address, select Newbie and check unsubscribe and in 30 sec we will be
history.
I heard that this does not always work well. Unless someone
I am installing from hard drive, i downloaded the /Mandrake and /image
trees.
Here's my System
i have win 95 and redhat 6.2 installed..
Amd K6 200MHZ
32MB RAM
8.4GB HD
Creative AWE64
3Com EtherLink III ISA
24X USDrives (cdrom)
here is the error msg i got..
in secound stage install
install
Hi...
I am trying to make my connection work...
I have a ISA modem, it is configured however it does not accomplish to
stablish a connection with my provider...
It gets the lines, dials, talk with the provider and then exits...
It says it cannot open the secret file.
I am using PAP for
unsubscribe
Hi!
I have a lan with:
192.168.0.1 (PC with Windows 98 SE with a modem, with internet connection
sharing)
192.168.0.2 (PC with Linux Mandrake 7.02, that have internet access through
the Windows PC).
Problems:
When Win PC is disconnected from internet (dial-up modem), there are two
problems:
49 matches
Mail list logo