Salve a tutti è la mia prima mail sulla mailing spero di non combinare
casini anche perchè non ho mai usato cose di questo tipo ;o) ho provato ad
installare mandrake 8.0 e anche io ho visto che ci metteva un casino di
tempo.alla fine ho abbandonato!
by Spider
salve, sempre io :) ho appena finito un estenuante setup di mdk 8.0 e non
riesco a configurare internet, ho un modem interno asuscomil mio piccolo
Linux lo riconosceho compilato tutto quello che dovevo compilare ma non
mi connettepotrebbe essere anche la linea occupata visto che uso
Hi all, does anyone know what this is
for?
I get the message showing up in my
/var/log/messages
modprobe: modprobe : Can't locate module
char-major-108
Can anyone tell me what it means? and where I can
get this file, and where to put it when I do find it.
Also,
I upgraded the kernel
Dear,
I was trying to install Mandrake Linux 7.2 on my new Dell C800 notebook. I
booted the machine and the installer started then i chose the language and
the type of installation. However when it asked to to install ot update I
chose install since this the first time. After that it dispalyed a
Hi everyone,,
I get randomly disconnected from my ISP and when I
check the /var/log/messages, I find this...
pppd [3128]: Hangup (SIGHUP)
pppd[3128]: Modem Hangup
I did not tell it to disconnect, it just
did, what would be causing this? anyone
know?
I have just read the pppd man, and
Geez, silly me. conk
Thnx,
-s
On Sunday 22 April 2001 09:05 pm, you wrote:
You can see it in Disk Free (in Applications --Monitoring) or /etc/fstab
On Tuesday 24 April 2001 07:23, you wrote:
2.4.3-13mdk.And another question if you please:
I loaded 8.0 last night, and I don't
And the config mentions specifically support for the Rio diamond thing (or is
it Diamond Rio?).
-s
On Monday 23 April 2001 12:28 am, you wrote:
Hello all,
I was thinking of purchasing an MP3 player. But since I'd prefer to have to
boot to Windows as little as possible, I'd need one with
s [EMAIL PROTECTED] wrote:
2.4.3-13mdk.And another question if you please:
I loaded 8.0 last night, and I don't remember if I used reiserfs or not [yes,
I am blond :-) ]. How can one tell which fs they are using? I think I did,
so my first question is still very relevant.
umhuh?
--
Mark
*
what knowledge I have managed to accumlate over the years
at times becomes obscured and even hidden amidst the vast
emotional onslaught of my children. You never finish being a parent. :)
On Mon, 23 Apr 2001, robert wydler haduch wrote:
At 12:47 PM 4/22/2001 -0400,
Along with Pmfirewall you should also configure portsentry to watch for
port scans. Pmfirewall, using Ipchains, is a wonderful first step, but a
single layered security scheme isn't much security at all. I wouldn't use
anything less then two layers and thats cutting things down to bare bones.
heh! every time I choose Grub I get LILO anyhow so I just stopped asking
for grub.
--
Mark
*
what knowledge I have managed to accumlate over the years
at times becomes obscured and even hidden amidst the vast
emotional onslaught of my children. You never finish being a parent. :)
On Sat,
The hosts.deny file is a file that Portsentry uses to keep track of ip
addresses of machines that have scanned your machine's ports and tried to
gain access to your machine.
if this file is empty it either means that portsentry hasn't detected
anyone scanning your machine, or that you haven't
Barbara,
The compiler is telling you it's confused and doesn't know for certain
whether it's supposed to do the job or not. Open the file Makefile and
check to make sure which compiler is being referenced in the file. specify
either gcc or g++.
--
Mark
*
what knowledge I have managed to
I have a Toshiba CDRW/DVD combo drive. ML7.2 installed fine from
CD, but now I can't read CDs -- even the ML install CDs -- on it.
The ML install set me up with supermount; I verified that with my
/etc/fstab.
As a normal user I get a permissions problem with /mnt/cdrom. As
root I get an I/O
s,
it would appear from the information you supplied that you didn't compile
the kernel but rather installed the RPM package version. if that is
correct then you did what I did last week and now you've got a mess.
if you're running Mandrake 8.0 I'm not sure what to tell you since I'm
still
Hans,
that little message indicates that you have installed and are running the
Reiser file system.
--
Mark
*
what knowledge I have managed to accumlate over the years
at times becomes obscured and even hidden amidst the vast
emotional onslaught of my children. You never finish being a
Lee,
I had my system setup essentially the same way until I stopped using
Windows all together. I'm using a 3Com/USRobotic ISA and last I heard your
modem was also supported. I have a feeling that it may be in the setup.
Open the Kppp interface with your modem set to use ttyS1 (COM2). you may
Um...pardon the breakin on this thread, but I'm wondering about something.
I'm thinking about upgrading to 8.0, but I'm not liking what I'm hearing
about the kernel in that version.(2.4.3) Is there another kernel version
offered during install? i.e. 2.2.17 or 2.2.19?
--
Mark
*
what
s,
It sounds like there is a good chance you have a bad iso (because of
your problems with reinstalling).
When I downloaded mandrakefreq-i586-20010316.iso, there was another file
named mandrakefreq.md5sum. That second file is a text file containing
the md5sum for the iso. Run the command
Require rectify this situation, current results not acceptable.
Cd Plextor burner was moved from hdd to hdc.
All attempts to burn a cd from an iso image result in:
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1
Ok...I think you may want to try passing this to the kernel when you boot.
root=/dev/hda5
see if that works. your windows partition is probably named /dev/hda1. And
as usually follows the first Linux partition gets named /dev/hda5.
--
Mark
*
what knowledge I have managed to accumlate
Mark,
Please straighen me out:
Mark Weaver wrote:
The hosts.deny file is a file that Portsentry uses to keep track of ip
addresses of machines that have scanned your machine's ports and tried to
gain access to your machine.
ai4a says that his hosts.deny file contains ALL: ALL: DENY.
Yeah it was very helpful. Thank you, very much.
-s
On Monday 23 April 2001 07:12 am, you wrote:
s,
It sounds like there is a good chance you have a bad iso (because of
your problems with reinstalling).
When I downloaded mandrakefreq-i586-20010316.iso, there was another file
named
s,
This is the post that describes how I used rsync to correct an iso after
a faulty download.
Hope this helps!
Randy Kramer
I had asked questions on the expert, newbie, and rsync list about using
rsync to correct a bad md5sum on an iso image. I finally got it to work
(instructions below).
Lee,
Mark reminded me of something. Are you rebooting to Linux (from
Windows) without shutting the machine off? If so, try shutting your
machine off and do a cold boot to Linux. With my PnP modem (Sierra), it
needs a power off to force it to be reset to allow reconfiguration.
Linux may be
Ok,
Let start with the obvious. Would you mind posting a copy of your
/etc/fstab file and your /etc/mtab file. This will help me determine.
what file system types you currently have and if there might be a
possibility of a conflict.
Furthermore, try to see if you can set the permissions on
Well, actually, yeah they were rpms, but you still have to make xconfig, make
dep, etc, etc, I chose reiserfs as a module. But when I booted, I got
an error. And then it (something) wanted to rename my cdrom, floppy, and zip
from /mnt/s to /dev/s. Weird sh*t. I've compiled several
This is not the post explaining how to use rsync, but another, shorter
post on md5sum. I will send the rsync post next.
Randy Kramer
michael wrote:
How do I use md5 sum check?
Just run:
md5sum filename
(for example, md5sum mandrakefreq-i586-20010316.iso)
After churning for a while, it
I'm new to this list and my question may well have been answered before,
but I don't know where to find the answer. When I first installed 7.2
the machine recognized the usb zip drive (to my amazement) and worked
perfectly for four days. Then came a sudden power outage (it tripped
the surge
Someone told me that using a boot disk Aurora will not work??? Is this
true?
Alan
__
Alan Carpenter
PC Specialist
Department of Computer Services
Virginia Wesleyan College
Office 757.455.3267
Cell 757.449.0381
Sorry, this is probably a repost, but all of my posts before and after
I sent this have appeared on the list, and this has not.
s,
This is the post that describes how I used rsync to correct an iso after
a faulty download.
Hope this helps!
Randy Kramer
I had asked questions on the expert,
Apparently for Aurora to boot, you need to have vga=0x314 in your
lilo.conf file. Here's the problem I don't have a lilo conf file. I
use a bootdisk. How can I make changes on the disk?. As root I try to
mount to it and I get a input/output error? Thanks for all your help.
Alan
I've created a partition and swap file space on my secondary harddrive. I
used Partition Magic to create the partitions.
The harddisk now looks like this:
|--- windows ---||--- linux part ---||--- linux swap ---|
| /dev/hdb1 || /dev/hdb2|| /dev/hdb3|
Questions:
1) Am I
Along with Pmfirewall you should also configure portsentry to watch for
port scans. Pmfirewall, using Ipchains, is a wonderful first step, but a
single layered security scheme isn't much security at all. I wouldn't use
anything less then two layers and thats cutting things down to bare bones.
the addresses should be ok, the Mandrake installation program have
partition utilities you will probably be asked to use. The major part is
to resize windows without lossing any data. Then I would use the free
space to install linux with the given installer.
I don't remember the 7.2
J'utilise Mandrake 7.2 l'install c'est bien passée,
mais ma carte son Creative Sound Blaster live value, me pose des problèmes sous
Mandrake linux.
Il me met:
L'erreure suivante s'est produite lors de
l'exécution du programme modprobe:
/lib/modules/2.2.17-21mdk/misc/emu10k1.o:
Hi all.
I think I'm confused.
In /usr/src I have Linux and Linux-2.4.2. Which one is the good one or the
running kernel.
which one do I rename? I did a mv Linux Linux.old or should I do
Do I place myself into the Linux or Linux-2.4.2 before I run make menuconfig
or xconfig to recompile.
If I
I haven't had a chance to try 8.0 yet, but with an
expert install in 7.2 you will be allowed to choose if
you want Lilo, Grub, or none. Also you will be able
to choose how your hard drive is partitioned or (if
you already have partitions), which partitions to use
for linux.
So long as you have
If you have call waiting, like myself, then someone trying to call you will
kick you offline, even when you do the *70 or whatever to disable call
waiting. There isn't much you can do about it really. The disable call
waiting feature doesn't work as well as intended. If you do have call
waiting,
If this is Mandrake 7.2, you probably need the drive
linked with scsi emulation.
cd /dev
rm cdrom
ln -s scd0 cdrom
--- Chubby Vic [EMAIL PROTECTED] wrote:
Require rectify this situation, current results not
acceptable.
Cd Plextor burner was moved from hdd to hdc.
All attempts to burn a cd
Lee,
Sorry I can't be more helpful. (I did respond because no one else had,
so far.)
gz is the extension for a gzipped file, so presumably something has to
extract it. I would have guessed that insmod knew how to do that if the
install procedure passed a file with a .gz to insmod, but I
Jacques,
try running sndconfig, I think that you have to exit X-windows, so do a
telinit 3 first.
Ciao,
On Sunday 22 April 2001 09:23, Jacques Muller wrote:
J'utilise Mandrake 7.2 l'install c'est bien passée, mais ma carte son
Creative Sound Blaster live value, me pose des problèmes sous
...
is there another kernel version
offered during install? i.e. 2.2.17 or 2.2.19?
I think not, but since you're upgrading, you should
already have a 2.2.x kernel which you can add to
lilo (grub) boot list in the installing bootloader
step.
Cheers,
- Steve
--
Mark
*
what
hi
i downloaded iso images of LM 8.0 . during full install(expert mode) i noticed that
the installer never asked me if i have the extention cd or not. even after
installation when i tried installing packages from extention cd , it failed because
the package is already installed.
that is the
On Monday 23 April 2001 19:41, you wrote:
As a registered and paid user of the CD version of ML7.2, what
is the upgrade policy for getting the ML8.0 CDs? Given the
culture and prices of packages systems, It seems to me that you
either download the free system, or buy a packaged system a full
Hi all,
Has anybody had any luck getting the mouse to work in LM 8.0 on an IBM
laptop? I have an IBM A20m which worked great for LM 7.2, but I can't get
it to detect the mouse in LM 8.0.
There was a topic about this on the Mandrake Forums, where it was described
how to get around the mouse detect
If you're unsure about what X you're running, you can
bring up a terminal a type:
X -version
It will tell you what version you are running. If you
are not happy with that version, you can easily
install the other version by typing the following in a
terminal:
XFdrake -expert
Just answer the
it all depends on the applications you want to install and how many users will be
using the system.
i'm the only user n partitions are about 350MB for root , 150MB (3 x ram) for swap ,
1500-200 MB for /usr and leave 1000 MB for /home.
it all been working more or less till now.
good luck
how big of a partition will linux madrake need and what kind of partition???
Thnx
Dennis Kalpedis
__
FREE Personalized Email at Mail.com
Sign up at http://www.mail.com/?sr=signup
Close, hde6.How do I pass that at boot time? Sorry if it is a stupid question.
It appears the fix will be a BIOS update. In that
case this fix should be OS independent (unless your
motherboard uses windows to do its tasks [for example
some built in RAID devices]).
You may need to use a windows-based flash utility, but
if you dual boot, this shouldn't be a problem. Just
First, you should get a copy of the entire /etc directory, also backup
anything that you have custom installed in /usr/local, and get a copy of
/home. Preferably you should then burn these tar.gz files off to CD (if
they are small enough) before starting the install just in case.
Michael
--
On Monday 23 April 2001 12:17 pm, you wrote:
On Monday 23 April 2001 12:00 am, you wrote:
And the config mentions specifically support for the Rio diamond thing
(or is it Diamond Rio?).
-s
On Monday 23 April 2001 12:28 am, you wrote:
Hello all,
I was thinking of purchasing an MP3
I just finished installing Mandrake 8.0, but I can't get sound to work.
I'm using a SoundBlaster AWE64 sound card, which has worked just fine in
every previous Mandrake version, but in 8.0 it won't. When I run sndconfig,
it tells me that No PnP or PCI sound cards were found in your system.
Hello, I cannot boot after I uninstalled linx4win, I have windows ME on this
hd and have another hd for linux.Is there anyway to remove grub and
have my computer boot normally under windows? I have tried reupgrading to
win me but grub boots and wont let me boot anything
thanks in advance,
User administration is broken in 8
I can't create user ntr because stupid userdrake
says close to group or some stupid poop like that,
I want it to OBEY my command and stop
giving me crap when I tell it to do something.
I had to install sendmail from the old 7.2 discs
because dumb postfix has
I don't know whats wrong with Mandrake 8 font installer,
I try to install the 2 files comic.ttf and comicbd.ttf
and it just sits there for 70
years, what can I do to make it go faster and just install
and quit being stupid?
Hello Guys
I doing a dual boot and I am trying to adjust the boot
menu. In MDK 7.2 everything was listed in a file
called menu.lst. However, this file disappeared in Mdk
8.0. What's up with that? Mdk are doing well as far as
user interface which will attract a lot of people and
I hope they stay
If you want to get rid of grub, boot up to windows
using your windows boot disk. From console type:
fdisk /mbr
This will overwrite your master boot record.
In a normal Linux there would be no way for you to
boot into Linux at this point other than your Linux
boot disk. Grub works flawlessly
Thanks for the tip guys - I went to the rio500 page at sourceforge and was
pleasantly surprised to learn about the very nice-looking gnome-rio fontend
http://rio500.sourceforge.net/gnome-rio/
But does this mean that the Rio 500 is presently the only mp3 player that can
connect to linux? Any
Hi,
From: Andrew Lazarewicz [[EMAIL PROTECTED]]
Sent: Tuesday, April 24, 2001 1:41 AM
To: Newbie List [EMAIL PROTECTED]
Cc:
Subject: [newbie] Upgrade policy?
As a registered and paid user of the CD version of ML7.2, what is the upgrade
policy for getting the ML8.0 CDs? Given the
Does anyone know of a good fax program for KDE or Gnome? I'm job hunting so
I just need something fairly simple to send out my resume. Thanks in advance.
Michele Kerby
robert,
you really need to get a grip with this thing of posting with no content.
either say something or quit posting! please!!!
--
Mark
*
what knowledge I have managed to accumlate over the years
at times becomes obscured and even hidden amidst the vast
emotional onslaught of my
63 matches
Mail list logo