Il 00:35, venerdì 18 Maggio 2001, hai scritto:
Sembra una cavolata, ma non so come fare le parentesi graffe. Sotto windows
usavo ALT+(codice ascii) ma sulla mia dstro non funziona...
Sapete aiutarmi'?
Grazie anticipatamente
Paolo
Premi Alt Gr + 7 per la graffa aperta e Alt Gr + 0 per
02:35, venerdì 18 Maggio 2001, Kayard:
Sembra una cavolata, ma non so come fare le parentesi graffe. Sotto windows
usavo ALT+(codice ascii) ma sulla mia dstro non funziona...
Sapete aiutarmi'?
Sul mio computer con la Mandrake 7.2 ho molti di questi caratteri usando
Alt Gr + vari tasti a
Ciao a tutti , ho da qualche giorno installato la versione 8.0 di
Mandrake e volevo esporre i miei problemi .
Uno Xcdroast non funziona bene , cioè quando clicco sull'icona scrivi il
programma si chiude bruscamente , quindi non posso masterizzare .
Ora quello che so e che la versione di xcdroast
1)Ciao,
Ops scusate, avevo sbagliato a ricordarmi l'elenco e al posto di FirstMouse+
dovevo scrivere MouseMan+:P
(cmq se sbaglio ancora sto intendendo l'unico modello logitech su PS/2 che
compare nell'elenco delle scelte)
Cmq ho provato a configurarlo come normale e non cambia niente,
Aiuto,
la MDK8 sembra non darmi tregua: l'orologio è
perenemente sbagliato... però solo le ore e KDE ha dei ritardi
sostanziosi che sembrano influenzare il comportamento
dell'orologio...
Sembra che le ore crescano troppo velocemente
rispetto ai minuti cioé crescono senza che i
[EMAIL PROTECTED] wrote:
Diciamo subito che un miglioramento per questa nuova versione di
mandrake c'è stata , però gli errori ci sono visto che anche xmms ha un
baco che però grazie ad una mail presente in questa mail list sono
riuscito a risolvere , comunque sia sono soddisfatto lo
Good morning all.
I wonder where I can read info about linux API. It was convenient in wins to
have them right off the bat, I knew the location. Now it is linux and I'm a
bit confused...
On Wednesday 16 May 2001 14:14, Eduardo Carrancá wrote:
Can I use lnx4win and windows 2000 with NTFS? Or is better not to try it?
Thanks for your help
Eduardo
Definitely do NOT try it. Lnx4Win was designed for win 9x.
If you want to have a linux there, make room by shrinking a partition
On Thursday 17 May 2001 07:32, John Clark wrote:
I have a MSI 694D motherboard with onboard VIA 686a chipset ide controller
and Promise FastTrak 100 w/ lite bios.
I also have an additional Promise FastTrak 66 with full bios.
I am trying to use Mandrake 8.0
I have 5 hd's and a cdrom all set
On Thursday 17 May 2001 10:34, Paul wrote:
It was Thu, 17 May 2001 11:53:35 -0500 when Chubby Vic wrote:
Perhaps time to look for another window manager?
Paul
Dang, they must be a bunch of mean old buttfaces
who don't want to help anyone,
why did they do that?
On Thursday 17 May 2001
On Thursday 17 May 2001 09:23, Nuno Ricardo Loureiro Ferreira wrote:
Hi all
I've just installed Win2000 and LM 8.0 on my machine.
The instalation went fine (think).
After reboot, the graphical lilo bootloader presented me with an entrie
called linux-nonfb (/boot/vmlinux). Can any tux
HI there all
I'v installed Xcdroast and all the libs that must go with it.
First of all I got the message that I needed GTK+ so I installed that too
now I get this message.
What do I have to do to creat a helper program in order to get it to run.
Iv checked out the site indicated but that
Right now I am using PMFirewallmainly because it was used by Mandrake
in their firewall tutorialbut is there a better firewall than
PMFirewall and I am also not too sure if the firewall is up and
running...ther is no indication if it is running or not.
What is your personal choice of a
I was wondering if anyone knew how to clear the location bar in Konqueror
web browser. I was not able to find anything in their help or on the
online FAQ. I am really stumped over this one.
Thanks all for looking at this
Brandon
[EMAIL PROTECTED]
Hi folks,
Are there any known issues regarding ISDN and CHAP in LM8? I`ve
struggled for the past 2 days to get it do dialup and authenticate
with no success whatsoever.
]
System:
1ghz AMD, 512M ram, Geforce2.
Asuscom ISDNLink PCI internal TA.
draknet, as in LM7.2, makes an arse of detecting
I'm in the midst of building a new machine and I'm trying to decide what
motherboard I should go after.
I'm going with a AMD K7 850, (For $105, it's a great price! :0) so now I
need a motherboard to put it in of course. Upon looking at motherboards,
I saw the ASUS A7V133 and the A7Pro.
Well
Rod,
Pmfirewall is fine for a workstation on a local network that also has a
dedicated firewall, but I would not recommend it for an
Internet-accessible server. By dedicated firewall, I am talking a separate
box that only does firewalling and nothing (or almost nothing) else. I use
FreeSco
HI,
How to install a module on linux M.?
My LimeWireLinux.Bin installed on LM8 after I install Kaffe. Use the software
manager, load the flat list and look for kaffe. After installing kaffe try installing
LimeWire.
Cyphfer
On Thu, 17 May 2001, Marcia Waller wrote:
On Thursday 17 May 2001 06:20, John Farrell wrote:
On Thu,
That kind of depends on what you want to do. For just
general C and C++ standard API stuff, you could use
either man pages (which I use as a last resort), or
any books that you would have on the standard library
would work (Linux sticks to standards like POSIX and
ANSI for threads, etc., so you
I've been messing around with my LM 7.1. I'm attempting to update a number
of packages so I can compile the latest kernel. I upgraded e2fs to version
1.19. This installs files in /usr/man/man1 man8. It installs files such as
xxx.1 and xxx.8. After installing these files, I went in and deleted
Hey all,
I accidentally deleted some files that were installed
on my system via an RPM last night. I tried to
reinstall the RPM with rpm -U theRPMName, but the
rpm utility told me that the rpm was already
installed. If it's possible, I'd like to get access
to just those files that I
On Thu, 17 May 2001, Dave wrote:
Well, it's still strange -- my ThinkPad is a 300MHz Celeron with 64 MB
RAM, and it runs both KDE 2 and Gnome just fine. Your system should be
able to do as well, from a hardware standpoint. Is it possible that even
though the correct X driver is installed,
Brandon, look to the left of the location box. You will see the word
location and left of it a white x in a black icon. Click that and you will
see the address box empty.
BTW I am very pleased with Konqueror, I have Java, secure Java, JavaScript
and several plugins work great. You can do
It was Fri, 18 May 2001 12:59:47 +0100 when Brian Skreeg wrote:
/etc/ppp/chap-secrets is like this
'[EMAIL PROTECTED]' * 'pass' *
I am not sure about your card, that should not be a problem.
But are you certain that you need to log in with your entire e-mail address?
Of course, if it worked
Eric,
Thanks for the reply. I was actually wondering how to clear all entries
in the location bar. I know that you can do a ctrl-u (which does what you
included) but I have alot of old entries in the location bar that keep
auto populating when I type in a URL. How do you clear all entries in
I understand how the controller works, I just want a driver that works with
it. I don't care how the drives come up I just want to be able to use them,
software raid or not.
From: Civileme [EMAIL PROTECTED]
To: John Clark [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: [newbie] M694D,
I have had no data corruption under 2000 I have had over 300gig of rars all
sfv checked with NO problems.
I installed SUSE 7.1 and it seemes to be working, no boot problems or
lockups or random crashing, but it still only sees the first channel.
From: Civileme [EMAIL PROTECTED]
To: ISU
If you still have the original rpm, you can do a:
rpm -qpil rpmname and that will show you what files the rpm has
it will also tell you where it installes them to
On Fri, 18 May 2001, Scott Canady wrote:
Hey all,
I accidentally deleted some files that were installed
on my system via an RPM
I just thought of another possibility. The X windows server, at least in
certain cases, will try to resolve the domain and IP of a host making a
request (in other words, it does a DNS lookup). Are you connected to a
network? I have run into terrible slow-downs when I lose a network
connection
Hi folks,
I just upgraded to Mandrake 8.0 from 7.2. I can no longer dual boot
between linux and Win 98.
No lilo. How do I get the lilo back? Thanks.
Marshall
Are you using startx from the command prompt? try using startkde
On Fri, 18 May 2001, marshall weber wrote:
Hi folks,
I just upgraded to Mandrake 8.0. I thought I configured it for kde2 but
gnome comes up.
I would prefer using kde2. I think it's installed but I'm not sure. Thanks.
What would be the proper entry in /etc/fstab to automatically mount my
windoze partition from hde? I would like to at least have read access to
be able to access files.
Is this correct?
/dev/hde1/mnt/windows ext2defaults 1 2
Thanks in advance
Ed
~~
Ed Kasky
Los Angeles,
On Fri, 18 May 2001, Aka Hippolyte MEA wrote:
HI,
How to install a module on linux M.?
list modules
/sbin/lsmod
install-insert
/sbin/insmod /path/to/module.0
uninstall-remove
/sbin/rmmod module_name
--
Petre Daniel
Romanian Whitehat
Phone:+4093591346
Hi,
With 7.1 7.2 I have used Junkbuster and latterly Webwasher with no problems.
With 8.0 (clean install) Webwasher runs and I can see it in the process list
but I can't access it via any browser.
Junkbuster won't start and says it can't bind to port 8000 and says another
Junkbuster might be
Hi Everyone,
Please excuse my Newbieness but I have a question regarding these e-mails.
Is this service (LM mailing lists) of all e-mails supposed to be setup as a
newsgroup? I have never been subscribed to a newsgroup but, for all the mail
I get now I wonder if this is supposed to be in a
If yours is like mine, you should not
let MDK autodetect then when the card list comes up choose the
Winbond, Wxxx chipset at the bottom. Mine has been working with this
settings since mandrake7.1. Card type in the /etc/isdn/profiles/mycard
file should be 36.
Thanks man, that really helped! But
Ron Phelps wrote:
I recently installed 7.2 and have the following problem when I boot.
If I don't have a zip disk in the drive when I boot, the message hdd:
lost interrupt repeatedly prints on the screen and the boot process
stalls. At this point if I put a disk in the drive I still get
Try this:
/dev/hde1/mnt/windows vfatuser,exec,umask=0 0 0
It should give you full read/write access.
Dave
On Friday 18 May 2001 10:33, thus spake Ed Kasky:
What would be the proper entry in /etc/fstab to automatically mount my
windoze partition from hde? I would like to at
On Fri, 18 May 2001, you wrote:
What would be the proper entry in /etc/fstab to automatically mount my
windoze partition from hde? I would like to at least have read access to
be able to access files.
Is this correct?
/dev/hde1/mnt/windows ext2defaults 1 2
I think
If you're startde from graphical login, there is a drop down selector.
Ric
marshall weber wrote:
Hi folks,
I just upgraded to Mandrake 8.0. I thought I configured it for kde2 but
gnome comes up.
I would prefer using kde2. I think it's installed but I'm not sure. Thanks.
brandon wrote:
Eric,
Thanks for the reply. I was actually wondering how to
clear all entries in the location bar. I know that you can
do a ctrl-u (which does what you included) but I have alot
of old entries in the location bar that keep auto
populating when I type in a URL. How do you
On Wednesday 16 May 2001 19:49, Marcia Waller wrote:
Dear All,
I just installed LM 8 after having LM 7.2 for awhile. I am having some
problems getting decent printing quality with my Epson Stylus Color
printer. I am using the cups + gimp printer driver which worked great in
7.2. I have
Try rpm -Fvh rpmname.rpm
-F freshens. So, it should only update with files
that are newer and replace missing files.
--- brandon [EMAIL PROTECTED] wrote:
If you still have the original rpm, you can do a:
rpm -qpil rpmname and that will show you what files
the rpm has
it will also tell
El Vie 18 May 2001 04:34, escribiste:
HI there all
I'v installed Xcdroast and all the libs that must go with it.
First of all I got the message that I needed GTK+ so I installed that too
now I get this message.
What do I have to do to creat a helper program in order to get it to run.
Iv
On Friday 18 May 2001 12:01, TezcatlipocA wrote:
Please excuse my Newbieness but I have a question regarding these e-mails.
Is this service (LM mailing lists) of all e-mails supposed to be setup as a
newsgroup? I have never been subscribed to a newsgroup but, for all the
mail I get now I
Are there any step by step idiots guide to installing DivX codecs and
everything I need to watch DivX movies?
--
ICQ# 27396393
Registered Linux User #181996
edit /etc/lilo.conf to include windows 98.
Then run /sbin/lilo
See this page for details:
http://www.mandrakeuser.org/docs/install/iboot.html
--- marshall weber [EMAIL PROTECTED] wrote:
Hi folks,
I just upgraded to Mandrake 8.0 from 7.2. I can no
longer dual boot
between linux and Win
Yes, all messages sent from this list will have
[newbie] in the subject line. Therefore, you should
be able to create a filter based on that and have the
newbie messages go to their own folder.
--- TezcatlipocA [EMAIL PROTECTED] wrote:
Hi Everyone,
Please excuse my Newbieness but I have a
There are several ways to do this:
1. Move to the end of the location line (you can press 'end') and
press 'ctrl-u'. This works in many other places as well, including a
standard console prompt and most input locations in X..
2. Move to the beginning of the location line (you can press
Marcia,
Is that an ink jet printer? Did you have it out of service very long
while you upgraded from 7.2 to 8.0? Is there any chance a cartridge has
clogged up? Do you have another computer that you can use to test the
printer?
Just some things to check.
Randy Kramer
Marcia Waller wrote:
here i am in lovely looking lm8, i.e. it looks the same as lm7.2, eagerly
looking forward to those little niggling things having been fixed from lm7.2
and guess what, java still doean't work in konqueror and most annoyingly,
editing the menus still produces zero effect!
it's such a tiny thing
Also try http://www.bastille-linux.org
--- brandon [EMAIL PROTECTED] wrote:
I don't use a firewall, but I found this one:
http://www.astaro.com/products/index.html
it seems to have a nice graphical interface to
configure with.
Hope it helps you..
Brandon
On Fri, 18 May 2001, Rod
As I mentioned earlier, I'm building a new machine this weekend.
I wanted to know if anybody has used or had good dealings with
SoundBlaster 128, or SoundBlaster 512 in their Mandrake 7.2, or
Mandrake 8.0 machines. I've found a place that has them for a
pretty good price, and was wondering if I
Try typing 'man rpm' in a terminal. That should give all the info you
need about RPM.
In short, the command you're looking for is 'rpm -Uvh --force
filename.rpm'.
On Fri, 18 May 2001 15:18, Scott Canady wrote:
Hey all,
I accidentally deleted some files that were installed
on my system via
I have a Compaq 1800T laptop. 1400/1050 screen with a ATI Mobility AGP(2)
16MB graphics card.
First time I installed LM8 the graphics worked at 1400!!! It was beautiful..
However, hitting ctrl-alt-F1 to go to console produced LCD frying, i.e.
nothing visible.
Reinstalled, worked again!
Well, Marcia, I think we ought to quit wasting ink. Seems our Epson printers
are also broken in 8.0. Mandrakesoft is being a little too quiet about these
problems people are having. Anyway, our choices - buy a HP, go back to 7.2,
or do without a printer until maybe it's fixed in 8.1.
P.S.
Hello! I'm having trouble finding the ncurses-devel RPM package for Mandrake
8.0. It doesn't appear together with the ncurses RPM on my install or
extension CD, nor in the list of packages for 8.0 on the FTP mirror site I
checked. I searched the mail-list archive and found 13 entries for
On Friday 18 May 2001 12:01, TezcatlipocA wrote:
Please excuse my Newbieness but I have a question regarding these e-mails.
Is this service (LM mailing lists) of all e-mails supposed to be setup as a
newsgroup? I have never been subscribed to a newsgroup but, for all the
mail I get now I
On Friday 18 May 2001 3:11, you wrote:
As I mentioned earlier, I'm building a new machine this weekend.
I wanted to know if anybody has used or had good dealings with
SoundBlaster 128, or SoundBlaster 512 in their Mandrake 7.2, or
Mandrake 8.0 machines. I've found a place that has them for
Hi Marcia,
I had the same problem with my Epson Stylus Color 600 printer producing
severely banded text output when I upgraded to LM8 from LM7.2.
Moreover, there were also very long and painful pauses during the
printing process - which were absent in LM7.2. I also use the CUPS+GIMP
driver.
Hi, I use avifile from
http://divx.euro.ru/
First of all, as root (or su), extract the binaries-xxx.zip to
/usr/lib/win32. Next extract the avifile-xxx.tar.gz file to /home/user.
Now
cd avifile
./configure
make
su
make install
Note that before doing all these, you probably have to first
KUPS is simply amazing - it can scan for a networked printer, and
installation proceeds in an entirely point-and-click fashion, without
any typing whatsoever (except for printer name..). I hope Mandrake will
one day incorporate this ease of use into its Printer configuration
applet. :)
On
Randy Kramer wrote:
On Friday 18 May 2001 12:01, TezcatlipocA wrote:
Please excuse my Newbieness but I have a question regarding these e-mails.
Is this service (LM mailing lists) of all e-mails supposed to be setup as a
newsgroup? I have never been subscribed to a newsgroup but, for all
Yeah, I bought one for about 35 bucks about 6 months ago and for some reason
it sounded pretty bad in Mandrake and Caldera. (Bad-bad, not bad-good). It
was an oem, and I was worried it may be defective. But I recently put it in
my son's machine running win98 and he loves it. It sounds
Hi Amigos,
I am simply very excited using Linux. I like to listen to music a lot. I
found out that Real Player can be installed on Linux-Mandrake but I
don't know which version is the one. Can you please show me the way???
Linux 2.x (libc6 i386) or
Linux 2.x (libc6 i386)RPM
Thanks,
If it's an ntfs formatted partition do I use ntfs in place of vfat?
Ed
At 01:20 PM Friday, 5/18/2001, Dave Sherman wrote -=
Try this:
/dev/hde1/mnt/windows vfatuser,exec,umask=0 0 0
It should give you full read/write access.
Dave
On Friday 18 May 2001 10:33, thus spake Ed
Can someone tell me how to determine the ip address of ppp0 using script? I
have my adsl connection up and running but I have to update dyndns.org
manually. I want to update it automatically.
Thanks
Reggie
Have you tried setting the printers up with kups?
That makes it super easy.
Configuration-Printers-Kups
--- John Rye [EMAIL PROTECTED] wrote:
This is a cross-post.
I've set up a local network of 2 1/2 machines (well
one is only half
working til I find some monitor specs grin), and I
69 matches
Mail list logo
