Ciao a tutti, Ho sempre il problema del Loop video, ma questa volta sono riuscito a
leggere la scritta che mi da.
Premetto che il tutto succede quando ancora X non è avviato e che sul testing iniziale
di avvio da tutto OK.
La frase è:
According to /var/run/gdm.pid gdm was already running
Ciao,
avendo seri problemi con kmid e kmidi, che non ne vogliono proprio sapere di
funzionare (Mandrake 7.2, KDE 2.0), vorrei chiedere come sia il vostro file
/etc/modules.conf. Il mio
e'
pre-install pcmcia_core /etc/rc.d/init.d/pcmcia start
alias usb-interface usb-uhci
alias
Ho un piccolo problema che forse qualcuno puo aiutarmi a risolvere .
Possiedo una creative geforce 256 con 32 mb di sgram.
Con linux mandrake 8.0 installato la mia scheda viene riconosciuta in
modo corretto ma con la differenza che invece di 32 mb di memoria video
ne vede solo 4 mb , come posso
Saluti a tutti gli aficionados di questa fantastica
lista,
vi scrivo per esporvi il mio problema.
Ho cercato per la cinquantesima volta di ricompilare
il kernel, volevo passare dal 2.5.3 al 2.4.5.
Non che ne abbia un'esigenza particolare, più che
aaltro perchè mi piacerebbe poter dire di esserci
Ciao a tutti,
ho due cdrom ma solo il secondo è collegato con la scheda sonora per
l'ascolto dei CD. Come faccio a dire a Linux che questo è il cdrom da cui
deve farmi ascoltare i brani musicali?!
Con Riproduttore CD funziona perchè nelle opzioni si può specificare il
device di origine ma con
I believe in my very limited knowledge that the command is
mv oldfilename newfilename
e.g. mv mydocument mydocument.bak
Nick
-Original Message-
From: Benjamin Sher [mailto:[EMAIL PROTECTED]]
Sent: 31 May 2001 04:37
To: Newbie
Subject: [newbie] Copy *.* to *.bak -- how?
Dear friends:
Oops, sorry bout that, just got in and jumped the gun - you can write a
script to loop through the contents of a directory and perform commands on
the files therein, but I don't know it off the top of my head.
Nick
-Original Message-
From: Benjamin Sher [mailto:[EMAIL PROTECTED]]
Sent:
On Wednesday 30 May 2001 13:27, OOzy Pal wrote:
No, no games. I don't play games. I just want Mandrake
to run fast enough. I used to have PIII 450 with Asus
AGP-V2740 (AGP Bus, Intel740TM accelerator) and
Mandrake was so slow. I hope nVIDIA runs fast enough.
OOzy
If you want it to run
I'm sorry for posting an Off-List topic.
Do you, by any chance, know a good linux hosting
company in US that will allow me setup our application
here and just send the hdd off to US?
Sherwin
p.s.
pls email me off-list.
Have a look at the man page of mmv (multiple move).
Nico
On Thursday 31 May 2001 05:36, you wrote:
Dear friends:
Let's say I have the following files:
File1
File2
File3
etc.
Now, normally to make a backup copy of each, I would do the following:
cp File1 File1.bk
cp File2 File2.bk
Hi,
Can anyone shed any light on as to what causes this error.
Occasionally when running simple commands such as ps -aux|grep xxx
and find . -name xxx all I get is a segmentation fault returned to me.
also when installing LM7.2 I got the error.
I can't remember the exact error but it's
Hi there,
how can a search for a specific text string in all files inside a
directory/directory tree?
Thanks
Phil.
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.255 / Virus Database: 128 - Release Date: 17-May-01
i don't know if anyone else mailed you re this (or if this will go via the list but
the NIC (if it is an ISA card at least)you have to use a DOS prog to set the IRQ
/memory settings.. i'm not sure i understand it but the process is described in better
detail here;
Hi everybody,
I'm locked in 800 X 600 using 16 bit mode. I need to get back to 1024
X768. It used to work.
My card is an NVIDIA GeForce 256 on a Dell Dimensions XPSB733. It was
working flawlessly. And, yes it works in Windows NT4.
I tried the Mandrake Control Center last night and I was to bring
more info please... are you running Xwindows (with only 32 meg ram?)
On Thursday 31 May 2001 06:01, Rob F wrote:
Hi,
Can anyone shed any light on as to what causes this error.
Occasionally when running simple commands such as ps -aux|grep xxx
and find . -name xxx all I get is a
Civileme wrote:
Choose another driver. There are many for each printer, so you can
achieve the best quality/speed tradeoff for yourself.
In which case, is anyone familiar with a suitable driver for the HP DeskJet
930C (I suppose such a driver would also cover the 932C, if not the entire
900
I almost always think that anyone complaining about the speed of MDK7.x or
greater MUST have a configuration problem (most likely in network settings)
that is slowing them down. like looking for a DNS that ain't there.. I maen,
heck how fast do you think it should be. every one I ever see that
hi there master of mandrake =]
ik have some trouble with my iso copies of your mandrake cd's. CD1 works
fine no problem there but when i insert cd2 it over with the fun... =[
during installation there is no problem but ik got a little video player to
play avi and quicktime files but during
Hi,
I'm not running X, (There's not enough memory for that)
I'm using Xwin32 on a win98 machine and launching xterms and apps as
needed. which seems to run ok.
The problem is intermitent, and sometimes goes away for a while after a reboot.
On Thu, 31 May 2001 06:44:57 -0400
etharp [EMAIL
We are looking at setting up a test small network at work , and are wanting
a cheapish hub. I was looking at getting a Netgear DS108. Which i also have
at home (its work great peer-to-peer). The real question i want to know is
will this hub work when connected to a server (ie managed as
does annybody have a linux and windows me system connected. if yes wich
program and could you send me the urls of that.
Ben de man
running linux mandrake 8.0 using KDE2 desktop on a AMDk6-3-450mhz 196ram
voodoo2 and rivatnt 2, 2x 3.4 gb hd and using tv-card (pinnacle tv rave) and
using a burner
Hi all,
I am getting these messages whenever I try to run newaliases
I was getting it with my normal file, so I changed it to a clean file from
the rpm update, and it still does it..
/etc/aliases: line 18: daemon... cannot alias non-local names
/etc/aliases: line 19: buildaddr: no mailer in
Any network hub will work for a small test network, regardless of the
types of hosts (client vs. server). But if you have a larger network, as
it appears you are already aware, then a managed hub or even a
programmable switch is the way to go, as it gives you much more control
over network
Hola,
Estoy interesado en comprar el nuevo Linux Mandrake 8.0, y me gustaria saber si todo
el paquete esta disponible completamente en espanol.
Gracias.
John David Molina wrote:
Any external modem should work. They are always real modems (not winmodems).
I've heard that some USB external modems are winmodems.
Randy Kramer
On Thursday 31 May 2001 12:57, you wrote:
On Wednesday 30 May 2001 13:27, OOzy Pal wrote:
No, no games. I don't play games. I just want Mandrake
to run fast enough. I used to have PIII 450 with Asus
AGP-V2740 (AGP Bus, Intel740TM accelerator) and
Mandrake was so slow. I hope nVIDIA runs
hi all !
i have following problem with the pop3 server that came with mandrake 7.2
(imap package, ipop3d executable):
it always complains about a invalid format of my mailbox file.
although its a standard unix mailbox format, created by procmail which
delivers my mails into the mailbox.
if
Just out of curiosity...
What exactly do you mean by fast enough? I run Mandrake 7.2 on a 300MHz
Celeron overclocked to 450 MHz, with 128 MB RAM, and a Western Digital
Expert 7200 RPM, 8.5 GB HD. The system runs great, with most apps loading
in 1-2 seconds.
Dave
On Wednesday 30 May 2001
In reply to my earlier message [newbie] Most appropriate driver for the HP
DeskJet 930C, wang ([EMAIL PROTECTED]) has emailed me offlist with a
malicious attachment, docs.scr.
Assuming that he/she is a member of this list, perhaps the list
administrator could remove him/her forthwith.
Michael
Guillemo:
One good source for information about modems is
www.idir.net/~gromitkc/winmodem.html. It has a very long list of modems that
identifies them as (1) real modems, (2) winmodems for which there is no fix,
and (3) winmodems that can be made to work under Linux -- and where the
drivers can
It was Thu, 31 May 2001 12:23:30 +0800 when newbie-mandrake wrote:
try something like
bash# for i in *; do cp $i $.bak; done
for i in *; do cp $i $i.bak; done
Note the i in front of the second $
Paul
--
Only passions, great passions,
can elevate the soul to great things.
-Denis Diderot
i'm having a heck of a time too. when i go to install
using the tar file i get an error that says my c==
compiler isn't working. any thoughts on how can i fix
this?
matt
--- Dave DeGear [EMAIL PROTECTED] wrote:
I had never tried Galeon before so I thought that
I should try it after these
There is a DSL modem made by Alcatel (External USB Ethernet) that has Linux
drivers. I currently have a 3Com PCI that doesn't support Linux. The USB modem
will run you about $115 and the Ethernet about $150.
Alan Carpenter [EMAIL PROTECTED] on 05/31/2001
01:32:26 PM
To: Newbie List
Yep my install is giving me this error "invalid
hdlists".
Would appreciate your help!
Rene
On Wednesday 30 May 2001 23:49, John David Molina wrote:
El Jue 24 May 2001 13:16, Marcia Waller escribió:
Dear All, I cannot print at all now in my LM8 with my Epson Stylus Color
with cups+gimp driver. I did download the new cups, too. It will printout
a test page and do the calibration
I do absolutely have ZERO problems using DSL with MDK 7.2 or 8.0. I am using
a Cisco DSL router with DHCP. All the configuration was done on the router.
My home LAN is a simple static IP LAN. The LAN side my router is 10.0.0.1 =
default gateway, and my 2 home Linux PCs are 10.0.0.50 and
Hi folks,
I have a Toshiba Satellite 2805 S202 laptop with intel Pentium III 700Mhz
and 128MB RAM.
I just installed Mandrake Linux 8.0 on one of the partitions. The
installation process went on without any glitches. My problem is, I can't
seem to get linux started. When I boot linux, the initial
I'm using windowmaker and a new install of mandrake 8. So far, I like mdk8.0
quite a bit -- it's working smoothly (right down to perfect installation of the
nvidia drivers). However, I cannot get windowmaker to read the menu generated
by menudrake. WM errors out on it, as does wmakerconf's menu
If there is another mail list that I should send this request to, please
let me know.
I have a Sony VAIO PCV-LX800 SlimTop. The install hangs during the X
configuration test. If you have successfully installed LM8.0 on this
machine, please tell me how you did it. I can provide more detail
Probably a formatting error in /etc/aliases. Send along an example.
Ric
Franki wrote:
Hi all,
I am getting these messages whenever I try to run newaliases
I was getting it with my normal file, so I changed it to a clean file from
the rpm update, and it still does it..
If it burned the first one, then I doubt that the problem with the
second is the burner. I would more suspect that the ISO image was
damaged before you tried to burn it (fairly common to see them get
corrupt on download. You should always check the md5sum before you burn
them.
I'd suggest
There are many. Personally, considering the prices, I'd look at a
switch, not a hub. For just a little bit more money, you get much better
performance. It just depends on the size of the network.
Linksys makes a good one, as does 3com.
Ric
Jamie Kerwick wrote:
We are looking at setting up
Hi all,
We got an Alcatel DSL modem here.. and it connects to the PC via ethernet
and requires no drivers..
you plug it in, set your IP's and stuff and DNS, and off you go,, it
required nothing specific to it at all,,,
It was no harder to set it up in Linux then it did in windows.
plug it in,
Occasionally when running simple commands such as ps -aux|grep xxx
and find . -name xxx all I get is a segmentation fault returned to me.
Have you checked your RAM? Look for memtest86
(one place is http://reality.sgi.com/cbrady_denver/memtest86/).
Another possibility is that maybe there is a
It was Thu, 31 May 2001 09:56:06 -0700 (PDT) when Matt Moore wrote:
i'm having a heck of a time too. when i go to install
using the tar file i get an error that says my c==
compiler isn't working. any thoughts on how can i fix
this?
Install it, and the devel-packages.
Paul
--
Only passions,
Perdona mi, no habla Espanol.
On Thursday 31 May 2001 07:32 am, so spoke Roma Vinas:
Hola,
Estoy interesado en comprar el nuevo Linux Mandrake 8.0, y me gustaria
saber si todo el paquete esta disponible completamente en espanol.
Gracias.
I've been using Gabber 0.8.2 on LM8 for a while now and a new version 0.8.3
just came out (no mdk versions yet). I keep getting reminders every time I
start Gabber so I decided to get the update. I download the source rpm and
do rpm --rebuild gabber_0.9.3.src.rpm and it gives me an error that the
It all depends on what you use. I have 1GB memory with 1GB swap and still run
out sometimes. However, I run graphics programs, video editing, netscape,pan
with HUGE newsgroups, and have two vmware machines running at the same time,
etc In either case, if you really did not need it before,
can you explain further what you mean when you say window related? as in
ment to run under M$ winders? also, am I correct in that you are not trying
to run games under some emulator like wine?
On Thursday 31 May 2001 07:13, you wrote:
do you run (window related) games under linux
Michael Carr wrote:
In reply to my earlier message [newbie] Most appropriate driver for the HP
DeskJet 930C, wang ([EMAIL PROTECTED]) has emailed me offlist with a
malicious attachment, docs.scr.
Assuming that he/she is a member of this list, perhaps the list
administrator could remove
Hi all,
did you know that there is a webmin module for Aurora ??
http://www.thirdpartymodules.com/webmin/?page=New+Modules
check it out, its free as one would expect..
so those of you that have requested some method of doing this, now have
one..
regards
Frank
I just curious about the gcc 2.96 packaged with Mandrake 8.0, is it stable ?
because the history of gcc 2.96 packaged with redhat 7.0 was not good right
?
Hi,I
reinstalled Mandrake 8.0 this morning on my laptop.
I can connect to the
internet using rp-pppoe (version 3), but looking up names like http://www.google.com/linux only works as
root. As a normal user, I can only browse using ip addresses. This
never happenned before and I'm not sure
i downlaoded and installed win4lin - howvever, after
stage one of the install was completed and the
win4lin kernel patch was installed i rebooted and
continued with stage 2 (instalation of windows). but
when the win4lin installer tries to access the windows
install cd to do so it says
could
*sigh* HTML in email is EVIL!
But back to the point... the ASUS A7V133, is a VERY NICE motherboard. That's what I'm
running right now.
It supports 266 FSB, it has a Promise ATA Controller on board, which will handle 4 IDE
devices. IT then
comes with the regular IDE controller that all
Hello!
I want to add /usr/java/jdk1.3.1/bin/ to my PATH
The shell is bash
How do I do??
//Magnus
I have already ordered my system with
MSI K7T Turbo-R
I hope it works fine. Even though it is RAID but I am
running it as a normal IDE.
--- Tim Holmes [EMAIL PROTECTED] wrote:
*sigh* HTML in email is EVIL!
But back to the point... the ASUS A7V133, is a VERY
NICE motherboard. That's
There's something else you're going to want to look for, or your webadmin will NOT
allow you access to
the interface.
As ROOT, edit the file /etc/webmin/miniserv.conf
I believe it's line 11, that by default reads:
ssl=1
Unless you have ssl configured and the cert created, you will not be
Actually, about 85% of all USB modems are Winmodems. I've only actually seen one
hardware modem that was
USB personally, and it was a good $150+.
I have a Viking USB modem that works beautifully in Windows, but when I tried to give
it to a friend to
use in Linux, I found out it doesn't
Do a man on grep. Grep is a VERY useful tool in *nix. It's great for use in scripts,
as well as just
basic use. For example, say you're looking for an error message, or something else in
a log file, and
you're too lazy to just read through the whole file, use a command like this.
[timh@yoda
Append it to your PATH line in /home/(user)/.bashrc or if you want it in
root then change your /root/.bashrc file.
--
It said uses Windows 95 or better, so I loaded Linux!
In a world without walls and fences, who needs windows and gates?
Kelley Terry [EMAIL PROTECTED]
Magnus Stenemo wrote:
Sven Heinicke wrote:
I'm a big galeon fan too, but I do have a user that galeon always
crashes on him. I am yet to look into it but yea old netscape 4 is
what he usually uses.
Michel Clasquin writes:
The browser wars are over.
Galeon is browsing perfection.
IMHO anyway
mandrake 8 setup hangs at the moment the "cracklib"
package is being copied during the installation process, i am trying to install
mandrake 8 on a celeron 400 pc with 128 ram and a 10 gb hard disk, the same
result happens while trying the same process in a thinkpad laptop. is this
a bug,a
Hi
I just installed mandrake 7.2 and now dos can't see my fat32 extended
partitions (although linux still sees them). Prior to the mandrake install
my harddrive was configured into 5 partitions - a primary dos fat32 parition
(c:) which I had recently formatted (in fact I was so slack I didn't
i have uninstalled and reinstalled pan and all it's dependencies two or three
times, i have tried the update from cooker and i still get this message,
it's funny but when i did an upgrade form 7.2 to 8 it worked, but i now i 've
done a clean install of 8 it doesn't, does any one know how i
Can anyone recommend a good player for these medias? I installed LM 8.0 and
it defaults to playing mpgs with the KDE media player but to the best of my
knowledge it only handles audio files. I also recently purchased a DVD-Rom
and I would like to view both dvd's and vcd's in linux as i do in
how do i do it? I tried rpm -i something.rpm but that doesn't seem to do it
so could someone please help me? should the rpm be in a certain folder
first?
Hi, I reinstalled Mandrake 8.0 this morning on my laptop.
I can connect to the internet using rp-pppoe (version 3), but looking up
names like http://www.google.com/linux only works as root. As a normal
user, I can only browse using ip addresses. This never happenned before and
I'm not sure
is it possible for a process to be immune to all forms of 'kill'? i keep
having to reboot every time xcdroast crashes because cdrecord and/or cdda2wav
don't stop running, i've read the man for kill and inserted every possiblity
after the -s option and also used kill -9 but nothing works, nor
Hi!
I just download the new NVIDIA rpms for LM 8.0, and it works very well.
www.nvidia.com
NVIDIA_GLX-1.0-1251.i386.rpm
NVIDIA_kernel-1.0-1251.mdk80up.i386.rpm
Install outside X and follow Installation Guide
Carlos
I am using Telocity dsl with Mandrake. Mandrake 8.0 configured the dsl
connection flawlessly during the install. Telocity uses DHCP to farm out
all network settings which is awesome for Linux. Automatically assigns IP
address and DNS servers. Telocity supplies a dsl router that handles the
Ivor Blockley wrote:
Hi
I just installed mandrake 7.2 and now dos can't see my
fat32 extended partitions (although linux still sees them).
Prior to the mandrake install my harddrive was configured
into 5 partitions - a primary dos fat32 parition (c:)
which I had recently formatted (in fact
the new ng situation. I can't find sh*t off the website, and can't get into
the ngs to find anything out. What's going on? I found out off of Hal
Burgiss's site that one must now sign up with some 3rd party newserver, but
we are limited or some sh*t.
I just don't get it. Can anybody
First let me say good luck. :-)
Ok, I've gotten mplayer to work on mpegs and avis, and vlc to almost do dvd.
It's hard to find things that will compile/install on Mandrake insert your
flame here, cause of dependencies that conflict when you try to satisfy them.
anyway, those were the one's
Hi,
I would like to have a ``receipt'' on the best way to
define a network environment.
I work at 2 different institutes, with each different
domain names and different way of setting the IP address.
The first uses a fix IP address and hostname, while the
second uses a fix hostname, but a
75 matches
Mail list logo