miKe wrote:
Empoli, 7 dicembre 2002.
L'informatica e' piu' strategica di quanto possa sembrare anche
dopo un'attenta valutazione. Si tratta di una meta-tecnologia
ovvero una tecnologia che serve a crearne altra: ogni oggetto o
Gli strumenti di formazione (culturale, sociale, personale)
delle
On Tue, 10 Dec 2002 19:15:47 +0100
giamgax [EMAIL PROTECTED] wrote:
Sei sicuro che il router utilizzi pppoe e non pppoa?
ciao, Andrea
Ho provato entrambe le soluzioni, purtroppo ciccia :-((
cos'altro potrebbe essere?
più che provare, dovresti vedere cosa c'è scritto sul contratto
Da quando utilizzo mdk 9.0 Open Office non funziona correttamente: se
apro un documento scritto con Word, non appena cerco di compiere una
qualsiasi azione all'interno del documento, il programma si chiude
bruscamente, si oscura lo schermo e mi chiede di ri-digitare il nome e
la password.
Alle 11:32, mercoledì 11 dicembre 2002, Emma e Gigi ha scritto:
Da quando utilizzo mdk 9.0 Open Office non funziona correttamente: se
apro un documento scritto con Word, non appena cerco di compiere una
qualsiasi azione all'interno del documento, il programma si chiude
bruscamente, si oscura
On Tue, 10 Dec 2002 11:46:38 +0100
giamgax [EMAIL PROTECTED] wrote:
Salve Lista!
Qualche giorno fa avevo postato (in maniera molto incasinata!) un quesito simile. Ho
proseguito con i tentativi ottenendo molto poco.
Riassumo
Ho installato su una macchina che fa parte di una piccola rete
Se hai pppoe prova a digitare adsl-
status e dalla risposta puoi capire
dove sta il problema.Poi digitando adsl-
start e se non si collega rifai
adsl-setup e lo configuri.
saluti rino
Scusate, forse non mi è ben chiara una cosa.
Espongo le mie considerazioni:
Se il router funziona
Collegandomi con Konqueror ad un sito ho il seguente messaggio d'errore:
Java VM version: 1.2.2
Java VM vendor: Sun Microsystems Inc.
Unable to load JSSE SSL stream handler, https support not available
java.lang.ClassFormatError: ryDropper (Local variable name has bad constant
pool index)
On Wed, 11 Dec 2002 14:24:46 +0100
rino favretto [EMAIL PROTECTED] wrote:
On Tue, 10 Dec 2002 11:46:38 +0100
giamgax [EMAIL PROTECTED] wrote:
Salve Lista!
Qualche giorno fa avevo postato (in maniera molto incasinata!) un quesito simile.
Ho proseguito con i tentativi ottenendo molto
On Wed, 11 Dec 2002 14:58:49 +0100
Marco Forti [EMAIL PROTECTED] wrote:
.
L'unica cosa è che non riesce ad aprire le pagine col browser dal pc
con linux (e, se non ho capito male, dovrebbe riuscirci con
windows) ... quindi se ha settato bene l'ip del router come gateway
forse
Il Wed, 11 Dec 2002 14:58:49 +0100
Marco Forti [EMAIL PROTECTED] ebbe a dire:
Scusate, forse non mi è ben chiara una cosa.
Espongo le mie considerazioni:
Se il router funziona e da pc si riesce a pingare l'ip del provider
(così ha scritto giamgax nella sua e-mail iniziale) ... cosa c'entra
Perfetto, il gateway e gli altri indirizzi li ho presi da win con route
print e ipconfig. Quello che mi spiazza è che non so dove trovare i
dns... e non posso chiederlo al provider e tanto meno all'amministratore di
rete ;-) Avete idea di dove si può andare a ravanare per trovarli?
Sparo una
On Wed, 11 Dec 2002 17:43:17 +0100
giamgax [EMAIL PROTECTED] wrote:
Quello che mi spiazza è che non so dove trovare i dns... e non posso chiederlo al
provider e tanto meno all'amministratore di rete ;-)
Avete idea di dove si può andare a ravanare per trovarli?
Sparo una cta: potrebbero
Ho creato uno script per mascherare gli indirizzi ip della rete locale
quando mi collego ad internet.
Come posso far in modo che esso venga esuito al boot del sistema?
Grazie, Pollo.
Ciao a tutti,
il mio problema è questo:
nel cd-rom di linux Mandrake 8.0 che ho installato
non c'è il man versione italiana, è possibile reperire
questo da qualche parte e quindi installarlo?
se si come?
grazie a tutti
Gaetano
Non vorrei dire una CAVOLATA ma credo dentro il file modules.conf che si
trova in /etc , con una riga tipo sh /posizione/momefile .
- Original Message -
From: Pollo [EMAIL PROTECTED]
To: newbie-mdk [EMAIL PROTECTED]
Sent: Wednesday, December 11, 2002 7:05 PM
Subject: [newbie-it]
On Wednesday 11 December 2002 7:22 pm, Roberto C 2 wrote about Re: [newbie-it]
come eseguirescript all'avvio:
Non vorrei dire una CAVOLATA ma credo dentro il file modules.conf che
si trova in /etc , con una riga tipo sh /posizione/momefile .
no, in quel file ci vanno i moduli da caricare
CAVOLI, hai ragione, da li puoi anche montare i dischi !!!...ma io quello
preferisco farco da fstab .
- Original Message -
From: freefred [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, December 11, 2002 9:00 PM
Subject: Re: [newbie-it] come eseguirescript all'avvio
On
Alle 20:33, martedì 10 dicembre 2002, contorcendoti la mente su Re:
[newbie-it] registrare suoni, Giorgio Griffon hai scritto:
P.S. Attendo con trepidazione di sapere quale enorme e complicatissimo
programma Arwan mi costringerà ad installare.
Risposta ovvia: snd. Gia' te l'avevo detto, mesi
PS. se ti consola, io riesco ad usare il mio modem con Linux, ma non
con win2k.
Mia moglie è un po' arrabbiata ;-)
anche il mio modem isdn non funziona con me,xp,nt,2k, ma solo con
95,98,98se e da 2 mesi anche con linux, grazie ai consigli della lista
On Wednesday 11 December 2002 00:12, Jonathan wrote:
I'm using LM 9. Has anyone had any experience using those USB hubs to
add more USB ports to your system? Any experience would be helpful,
also whether or not you used an external power supply or got by with
the power from the USB port.
I
Hello -,
Wednesday, December 11, 2002, 6:23:45 PM, you wrote:
n I've been trying to join a Windows 2000 server domain but when I do a
n smbpasswd -j home -r netserver -U Administrator
Have you checked this page ?
http://www.mandrakeuser.org/docs/connect/csamba6.html
--
Best regards,
On Wed, 2002-12-11 at 18:23, - netmaniac - wrote:
I've been trying to join a Windows 2000 server domain but when I do a
smbpasswd -j home -r netserver -U Administrator
I get:
Password:
Error connecting to netserver
Unable to join domain
The machine netserver is up and running and
I have an unsupported HP 315 photosmart camera, ( usb ).
Usbview finds it, and correctly identifies it. Etc/Hotplug knows about it as
well.
Gphoto has no driver for it, cannot make it work.
It seems to me that I should be able to mount it as a filesystem ? of some
kind / type, virtua,l
For a variety of reasons (and I won't bore you with the details) I have
to reinstall LM 9.0. However, I have set up the software manager with a
lot of extra ftp/http sources and it would be a real hassle to do it all
again. Is there a config file that I could save and then reinstall
afterwards?
On Wed, 2002-12-11 at 01:48, Frans Ketelaars wrote:
On 11 Dec 2002 00:05:21 -0600
Ray Henry [EMAIL PROTECTED] wrote:
OK, how does one go about writing commands to the modem to see what it's
doing? I've recently lost the use of my WinModem fax modem, and can't
for the life of me
On Wed, 11 Dec 2002 05:01:06 -0500
Dennis Sue [EMAIL PROTECTED] wrote:
I have an unsupported HP 315 photosmart camera, ( usb ).
Usbview finds it, and correctly identifies it. Etc/Hotplug knows about
it as well.
Gphoto has no driver for it, cannot make it work.
It seems to me that I should
On 11 Dec 2002 09:54:59 +
David Robertson [EMAIL PROTECTED] wrote:
For a variety of reasons (and I won't bore you with the details) I
have to reinstall LM 9.0. However, I have set up the software manager
with a lot of extra ftp/http sources and it would be a real hassle to
do it all
On Wed, 2002-12-11 at 21:13, Ray Henry wrote:
OK, says it's already installed. But it's not in any of the menus, and
locate minicom or locate Minicom find nothing. Search on the Internet
reveals nothing as to where to find it. How does one find it on the
system?
If you run:
updatedb
...you
Hi,
I have several distributions in use, not really make up my mind yet :-)
I like Mandrake 9.0 very much, it is trouble free and runs smoothly.
One little problem I do have, at some situations Kmail uses utf-8
when I reply messages and utf-8 messes up scandinavic locales
(äåö) in unreadable
No, You have to urpmi.update -a and it updates the files and lets it
work.
-Original Message-
From: Ralph Slooten [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 11, 2002 10:41 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] urpmi
On 11 Dec 2002 09:54:59 +
David Robertson [EMAIL
On Wednesday 11 December 2002 11:54, David Robertson wrote:
For a variety of reasons (and I won't bore you with the details) I
have to reinstall LM 9.0. However, I have set up the software
manager with a lot of extra ftp/http sources and it would be a real
hassle to do it all again. Is there a
On Wednesday 11 December 2002 12:13, Ray Henry wrote:
With Windows, you can use Hyperterminal to write requests
directly to the modem and see what the responses are. Anything
like that in Mandrake 8.2?
Minicom :) HTH,
OK, says it's already installed. But it's not in any of the
Let me be a bit clearer on this, you need the /etc/urpmi/urpmi.cfg file
which holds all the connection information, there may be an easier way
but I then overwrite the /var/lib/urpmi directory with the new stuff
(this holds the lists for the sources set-up in the config file), and
then do an
Is there any way of finding out if a 3com 508 is in half or full duplex mode
without shutting down the server and running 3coms set-up program.
Come to think of it, is there any way of finding out if ANY NIC is in 10 or
100 mode and full / half duplex without shutting down the machine.
Many
Ken; Most NIC's, hubs switches, etc. will display the speed of your
connections by using 2-color LEDS. The general rule-of-thumb is that a
10Mb connection will show an amber or yellow LED color on the NIC, hub,
etc., and a 100 Mb connection will show a green LED. The owners manual
for your NIC,
On Wed, 2002-12-11 at 22:19, Ken Walker wrote:
Is there any way of finding out if a 3com 508 is in half or full duplex mode
without shutting down the server and running 3coms set-up program.
Come to think of it, is there any way of finding out if ANY NIC is in 10 or
100 mode and full / half
Hello!
Recently I finally did it - dumped my perfectly working 8.2 and installed 9.0.
After two weeks I have list of problems:
1. Sound. My mp3 collection plays OK. Sound effects in KDE work OK. But games
like Maelstrom and few others are broken - in KDE sound comes hacked, in
other WMs there
On Wed, 2002-12-11 at 16:08, Stephen Kuhn wrote:
On Wed, 2002-12-11 at 09:17, Dennis Myers wrote:
A friend gave me one of those cases that you can put a spare hard drive in and
it uses a parallel port connection. It is generic and has no FCC # on it, but
the box says it works for hard
If it is installed, you should have
/usr/bin/minicom and
/usr/bin/xminicom
There was a mini_commander_applet there, no minicom or xminicom.
If they are not there, try (as root, from an xterm)
rpm -e minicom
urpmi minicom
Yes! That did it! Installed the very same one I was trying to
I think it is rather weird that it does this, but then it isn't that big a
deal for me to stay away from that rodent until shutdown (or maybe, in your
case, boot-up) is finished. Problems like these I can live with as long as I
find the source of the problem and see something I can do keep it from
Daniel Buchanan wrote:
ok i got it working most of the way. I see what my problem was. Lilo
is compiled and i had assumed it was outo compiled and not only on
demand. No wonder nothing seemed to work exactly the way i wanted it
to. Now my only problem is how to keep the system from
On Wed, 2002-12-11 at 05:57, Vahur Lokk wrote:
Hello!
Recently I finally did it - dumped my perfectly working 8.2 and installed 9.0.
After two weeks I have list of problems:
1. Sound. My mp3 collection plays OK. Sound effects in KDE work OK. But games
like Maelstrom and few others are
On Wed, 2002-12-11 at 23:04, Ray Henry wrote:
So, got it working. Now just have to figure out why it can't detect a
dial tone. It's somewhere in software... Modem responds to all commands
except dialing out... :/
I have often experienced problems with modems not detecting a dialtone
here
Dennis Sue wrote:
I have an unsupported HP 315 photosmart camera, ( usb ).
Usbview finds it, and correctly identifies it. Etc/Hotplug knows about it as
well.
Gphoto has no driver for it, cannot make it work.
It seems to me that I should be able to mount it as a filesystem ? of some
kind /
On Wed, 2002-12-11 at 06:37, John McQuillen wrote:
On Wed, 2002-12-11 at 23:04, Ray Henry wrote:
So, got it working. Now just have to figure out why it can't detect a
dial tone. It's somewhere in software... Modem responds to all commands
except dialing out... :/
I have often
I have CDR and CDRW
The system recognize the CDRW in /dev/scd0
And the CDR in dev/hdc
When I press on detect writer the Eroaster detects the CDRW but when I press
the detect reader it detects again the CDRW.
What to do
Thanks gil
Want to buy your Pack or Services from MandrakeSoft?
Go to
On Wednesday 11 December 2002 05:35, Ralph Slooten wrote:
I think you are shit outta luck here if you are looking of an easy
way to do this
In that case I suggest getting a usb compact flash reader (I have San
Disk, which I got for about $23 at Best Buy - works great in Linux). Be
sure you
Title: RE: [newbie] PV-BT878P+w/FM tv card how do u set it up properly in Mandrake 9.0
I built a PC to be our home-entertainment-system (replacing TV, CD Player, DVD Player and Tuner while adding MP3/OGG Player, Video Recorder, and Digital Video Player)
All of it's working except the FM
Yes, I gave it a root password and can log in as root with red screen
and all. What I can not do is install packages and change config files
without getting a message to the effect that I do not have the rights to
do it.
Thanks for the reply.
Roly
On Tue, 2002-12-10 at 14:09, Dennis Myers wrote:
Derek Jennings wrote:
On Wednesday 11 Dec 2002 2:14 pm, John Richard Smith wrote:
The only package I could find,
rpm -rebuild ardour-0.107.3-1mdk.src.rpm
Installing ardour-0.107.3-1mdk.src.rpm
error: failed build dependencies:
alsa-driver = 0.9.0beta2 is needed by ardour-0.107.3-1mdk
Hi, one more time the computer has crashed. I am
beginning to think that the drive has been damaged, from before when I had a
virus etc. My husband has an older computer, Pentium 2 that he has said I can
set up Linux on. He would like to try to reformat my drive and take the time to
figure
Why would a list member request a reply from my
computer that I have received his message. Will they then get myraid's of emails
with our addy's...already available on our posts. Perhaps this should be turned
off. Just a thought
In reply to Don's mail, d.d. Wed, 11 Dec 2002 08:58:41 -0800:
Why would a list member request a reply from my computer that I have
received his message. Will they then get myraid's of emails with our
addy's...already available on our posts. Perhaps this should be turned off.
Just a thought
It is
Is anyone here using the Asus A7N8X motherboard, or any motherboard
with the nForce2 chipset? I am interested in this MB, but want to make
sure Linux will work with it without a lot of hassles.
Thanks.
TC
__
Do you Yahoo!?
Yahoo! Mail Plus -
Enable SCSI emulation on the CD-R drive in lilo.
This will make /dev/hdc /dev/scd1 and ERoaster
will see it.
Miark
On Wed, 11 Dec 2002 14:57:20 +0200
Gil Katz [EMAIL PROTECTED] wrote:
I have CDR and CDRW
The system recognize the CDRW in /dev/scd0
And the CDR in dev/hdc
When I press on
How can I link the Apahce htdocs to my window Apache htdocs so I can work on
one directory.
c:\WebDev\Apache\htdocs
_
Tired of spam? Get advanced junk mail protection with MSN 8.
http://join.msn.com/?page=features/junkmail
Run a graphical network monitor such as gkrellm or kcpuload.
Then upload and download and download a large file at the same time.
Put the monitoring on the quickest update possible--100ms or whatever.
If it's not clear doing that, upload (or download) the same file and
time it.
Miark
On Wed, 11
Probably because they are using Outlook and have the Request delivery receipt or read
receipt box checked. I don't think that it is anything sinister. Just don't send the
receipt notification. If you can identify the user, you could send them an email
about it, because they probably aren't
You can get an AFS cluster up, but i dont see why you want this setup are
you running windows and linux on one box?
On Wednesday 11 December 2002 10:12 am, Fish Fash wrote:
How can I link the Apahce htdocs to my window Apache htdocs so I can work
on one directory.
On December 11, 2002 03:50 am, Tuija wrote:
Hi,
I have several distributions in use, not really make up my mind yet :-)
I like Mandrake 9.0 very much, it is trouble free and runs smoothly.
One little problem I do have, at some situations Kmail uses utf-8
when I reply messages and utf-8
Its a
good way to get confirmed address's if you are a spammer...
rgds
Frank
-Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Don and Alexa PongraczSent: Thursday, 12 December
2002 12:59 AMTo: [EMAIL PROTECTED]Subject:
[newbie] curious
There was talk of this on the expert list... check the archives...
apparently there have been some success's and failures..
Nvidia have nforce2 linux drivers available..
the expert list gave some advice on how to get it up and running.
rgds
Frank
-Original Message-
From: [EMAIL
that's a thought
- Original Message -
From:
Franki
To: [EMAIL PROTECTED]
Sent: Wednesday, December 11, 2002 9:46
AM
Subject: RE: [newbie] curious
Its
a good way to get confirmed address's if you are a
spammer...
rgds
Frank
-Original
Yes, I am running both. I have to, so I can test my website on windows since
most users are using windows.
From: Vasiliy Boulytchev [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Apache htdocs
Date: Wed, 11 Dec 2002 10:37:51 -0700
You can get an
How do I do that
I run lilo with switches ?
-Original Message-
From: Miark [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 11, 2002 7:19 PM
To: Newbie
Cc: [EMAIL PROTECTED]
Subject: Re: [newbie] Eroaster (was CDR)
Enable SCSI emulation on the CD-R drive in lilo.
This will make
Does 8.2 support winmodems. I have HCF (conaxent or something). How can I
install it?
_
Tired of spam? Get advanced junk mail protection with MSN 8.
http://join.msn.com/?page=features/junkmail
Want to buy your Pack or
On December 11, 2002 05:57 am, Gil Katz wrote:
I have CDR and CDRW
The system recognize the CDRW in /dev/scd0
And the CDR in dev/hdc
When I press on detect writer the Eroaster detects the CDRW but when I
press the detect reader it detects again the CDRW.
What to do
Thanks gil
For the
There is a linux HCF modem driver now..
http://www.mbsi.ca/mailman/listinfo/hcflinux
They have 8.2 drivers.. they work, I have used them..
rgds
Frank
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Mr. VLE79E
Sent: Thursday, 12 December 2002 2:30 AM
Seems the Spam King has been /.ed.
http://www.freep.com/money/tech/mwend6_20021206.htm
Delicious irony, don't ya think?
Regards;
--
Charlie
Edmonton,AB,Canada
Registered user 244963 at http://counter.li.org
Slow day. Practice crawling.
Want to buy your Pack or Services from MandrakeSoft?
On Wed, 2002-12-11 at 23:37, John McQuillen wrote:
On Wed, 2002-12-11 at 23:04, Ray Henry wrote:
So, got it working. Now just have to figure out why it can't detect a
dial tone. It's somewhere in software... Modem responds to all commands
except dialing out... :/
I have often
On Wed, 11 Dec 2002 12:50:06 -0700
Charlie [EMAIL PROTECTED] wrote:
Seems the Spam King has been /.ed.
http://www.freep.com/money/tech/mwend6_20021206.htm
Delicious irony, don't ya think?
Yeah, it was funny... about a week ago (6/12) when it got /.ed... LOL.
Maybe it's time to clear your
On Wednesday 11 December 2002 02:33, David Williams wrote:
I am using the USB cradle. I tried everything that I could think of under
Evolution and Kpilot for USB setup and I couldn't get anything to work. I
read on some web site somewhere that Jpilot was much more forgiving (read
that as
On Wed, 2002-12-11 at 23:44, John Richard Smith wrote:
If your camera is not supported then it's not supported.
most of the chepies are not. Mine included.
there are three possible solutions,
Try to get it to work as a mass storage device.
Mount any windblows OS and then having used
On Wed, 2002-12-11 at 23:54, Ray Henry wrote:
On Wed, 2002-12-11 at 06:37, John McQuillen wrote:
On Wed, 2002-12-11 at 23:04, Ray Henry wrote:
So, got it working. Now just have to figure out why it can't detect a
dial tone. It's somewhere in software... Modem responds to all
On Wed, 2002-12-11 at 13:53, Ralph Slooten wrote:
Yeah, it was funny... about a week ago (6/12) when it got /.ed...
be nice...not all of us refresh slashdot every 2 minutes. besides, I
signed you up for a few enter to win things, too.
|:-0
Want to buy your Pack or Services from
On Thu, 2002-12-12 at 00:16, Sabin, Matthew wrote:
I built a PC to be our home-entertainment-system (replacing TV, CD
Player, DVD Player and Tuner while adding MP3/OGG Player, Video
Recorder, and Digital Video Player)
All of it's working except the FM tuner and the DVD playback -- where
the
On Thu, 2002-12-12 at 03:43, Don and Alexa Pongracz wrote:
Hi, one more time the computer has crashed. I am beginning to think
that the drive has been damaged, from before when I had a virus etc.
My husband has an older computer, Pentium 2 that he has said I can set
up Linux on. He would like
On Thu, 2002-12-12 at 04:12, Fish Fash wrote:
How can I link the Apahce htdocs to my window Apache htdocs so I can work on
one directory.
c:\WebDev\Apache\htdocs
You're not going to be able to see the Apache docs via Windowsunless
you copy the docs dir to the Windows partition under
On Thu, 2002-12-12 at 05:30, Mr. VLE79E wrote:
Does 8.2 support winmodems. I have HCF (conaxent or something). How can I
install it?
You can get HCF/HST modem drivers source code and compile the drivers as
per your system. On Sourceforge.net, there is a set of three drivers
precompiled that
On Thu, 2002-12-12 at 06:50, Charlie wrote:
Seems the Spam King has been /.ed.
http://www.freep.com/money/tech/mwend6_20021206.htm
Delicious irony, don't ya think?
Regards;
--
Charlie
Edmonton,AB,Canada
Registered user 244963 at http://counter.li.org
Slow day. Practice crawling.
i dont believe winmodems are supported by linux, since windows takes care of
modulation/demodulation part, not the chip on the modem.
On Wednesday 11 December 2002 11:30 am, Mr. VLE79E wrote:
Does 8.2 support winmodems. I have HCF (conaxent or something). How can I
install it?
I was thinking an AFS cluster, but yeah, its is the worst way to test
windows/linux website interoperability. And I tell you, linux will run more
than an IIS server, I will stand behind my words. And if you bring ASP, I
will have to slap you around. hehe
On Wednesday 11 December 2002 01:57
On Wed, 2002-12-11 at 16:08, Stephen Kuhn wrote:
On Wed, 2002-12-11 at 09:17, Dennis Myers wrote:
A friend gave me one of those cases that you can put a spare hard drive in and
it uses a parallel port connection. It is generic and has no FCC # on it, but
the box says it works for hard
although, i have tried installing one on slack 3.blah back in the old days
when I understood nothing. I cant speak about todays modem drivers, since I
havent set one up in ages.
On Wednesday 11 December 2002 02:11 pm, Vasiliy Boulytchev wrote:
i dont believe winmodems are supported by linux,
Myers, Dennis R NWO wrote:
So the system finds the device ok , but that's as far as it goes.
John
Hmm, what is it, then? Some weird proprietary file system?
I wish I could tell you , I plucked up courage just now and decided to try
formatting the card in the camera in fat32, but
Francisco Alcaraz Ariza wrote:
Did you load the usb-storage module?
El Mié 11 Dic 2002 16:37, John Richard Smith escribió:
Todd Slater wrote:
On Wed, Dec 11, 2002 at 05:01:06AM -0500, Dennis Sue wrote:
I have an unsupported HP 315 photosmart camera, ( usb ).
Usbview finds it,
I have been on this list for a few months and have saved all messages I
thought were important. Today I installed a new hard drive and moved MDK
over to it and resized the partitions without one problem. All due to the
advice given this list.
George Baker
[EMAIL PROTECTED]
Tel: 073 3172714
The
On 11 Dec 2002 14:32:41 -0600
Jason Guidry [EMAIL PROTECTED] wrote:
On Wed, 2002-12-11 at 13:53, Ralph Slooten wrote:
Yeah, it was funny... about a week ago (6/12) when it got /.ed...
be nice...not all of us refresh slashdot every 2 minutes. besides, I
signed you up for a few enter to
On December 11, 2002 12:53 pm, Ralph Slooten wrote:
On Wed, 11 Dec 2002 12:50:06 -0700
Charlie [EMAIL PROTECTED] wrote:
Seems the Spam King has been /.ed.
http://www.freep.com/money/tech/mwend6_20021206.htm
Delicious irony, don't ya think?
Yeah, it was funny... about a week ago
Myers, Dennis R NWO wrote:
Well I tend to agree, I think a reader is the best route because you
will inevitably
want to use all sorts of peoples cameras , and well a readers means
you can.
The only thing is that there is quite a lot more to readers than meets
the eye.
At first I went out
On Wed, 2002-12-11 at 10:43, Don and Alexa Pongracz wrote:
Hi, one more time the computer has crashed. I am beginning to think that the drive
has been damaged, from before when I had a virus etc. My husband has an older
computer, Pentium 2 that he has said I can set up Linux on. He would like
On Wednesday 11 Dec 2002 14:11, Todd Slater wrote:
On Wed, Dec 11, 2002 at 05:01:06AM -0500, Dennis Sue wrote:
I have an unsupported HP 315 photosmart camera, ( usb ).
Usbview finds it, and correctly identifies it. Etc/Hotplug knows about
it as well.
Gphoto has no driver for it, cannot
No No, I am not using IIS. I am using Win Apache. Anyway, one guys mentioned
the ln command. How to use it and where can I find the htdocs?
From: Vasiliy Boulytchev [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: [newbie] Apache htdocs
Date:
On Wednesday 11 December 2002 05:58 am, John McQuillen wrote:
On Wed, 2002-12-11 at 16:08, Stephen Kuhn wrote:
On Wed, 2002-12-11 at 09:17, Dennis Myers wrote:
A friend gave me one of those cases that you can put a spare hard drive
in and it uses a parallel port connection. It is generic
On Thu, 2002-12-12 at 08:54, Charlie wrote:
Can you tell I'm looking forward to Friday and the release of Star Trek
Nemesis? grin
Regards;
--
Charlie
Are you going to watch it because
A.) You know that Nemesis was created on a render-farm of linux boxes?
B.) You know that most of the
On Thu, 2002-12-12 at 09:16, Mr. VLE79E wrote:
No No, I am not using IIS. I am using Win Apache. Anyway, one guys mentioned
the ln command. How to use it and where can I find the htdocs?
If you're using Windows' Apache, cain't help ya mate.
Don't do Windows unless I absolutely have to (or
OK, since updating my libraries, my modem has stopped functioning. I can
use minicom to send commant to the modem, and everything responds well
until I go to dial out. Then I get a no dilatone error. This is
incorrect.
The modem is a conextant winmodem, and I got it going using the rpm
mbsi.ca.
i get payed not to use windows
On Wednesday 11 December 2002 03:51 pm, Stephen Kuhn wrote:
On Thu, 2002-12-12 at 09:16, Mr. VLE79E wrote:
No No, I am not using IIS. I am using Win Apache. Anyway, one guys
mentioned the ln command. How to use it and where can I find the htdocs?
If you're
On Thu, 2002-12-12 at 10:14, Vasiliy Boulytchev wrote:
i get payed not to use windows
Well, same here, but at least I do things in linux out of LOVE for the
OS...as opposed to Windows...
...who joyfully does what they hate to do? (Married men need not answer)
--
Thu Dec 12 10:20:01 EST 2002
On Wednesday 11 December 2002 16:11, Vasiliy Boulytchev wrote:
i dont believe winmodems are supported by linux
Actually, a surprising number can work in Linux, although my personal
preference is to just get an external hardware modem so I always know
it will work.
1 - 100 of 129 matches
Mail list logo
