John Layt wrote:
On Sun, 3 Oct 2004 00:05, Marc wrote:
I have a friend that is shopping for a new laptop. Quality and being 100
ML compatible are both very important. as is wireless networking.
Can anyone here make some suggestions as to a brand or model number.
Thanks
Marc
I
Vincent Voois wrote:
Quality and being 100% ML compatible are pretty high demands.
The most known brands have their problems and issues, but if you
always handle a laptop with care, the most will remain good.
I don't know about 100% ML compatability, but about quality of the
known brands:
I
Andy Allen wrote:
Can someone please tell me how, in very simple steps, how to report a
bug/issue.
You can report a bug here http://bugs.mandrakelinux.com/
Marek
Want to buy your Pack or Services from MandrakeSoft?
Go to
Well last night I sent off a happy email telling of my success...
This morning I log on to find that Evolution won't start up :(
[For those who were not followwing the earlier thread, I just upgraded
from Mandrake 9.0 to 10.0]
Now when starting Evolution I get the following error messages:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
I know there was a thread on this not long ago but it didn't answer my
problem. I am on Mdk 10 and in order to get my Traveling Disk 2.0 USB Flash
Drive to work I had to make a directory /mnt/memstick then mount it using
#mount -t vfat
Hi, does anyone know if you can configure Shorewall on the download edition of
MandrakeMove. I can open the files as root but when I go to save the newly
configured file it won't allow me. Is this because I am reading the file off
the CD Rom and am unable to write to it?
I cannot get the MCC
On Sun, 2004-10-03 at 15:25, Merlin Zener wrote:
Well last night I sent off a happy email telling of my success...
This morning I log on to find that Evolution won't start up :(
[For those who were not followwing the earlier thread, I just upgraded
from Mandrake 9.0 to 10.0]
Now when
Simon Utley wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
I know there was a thread on this not long ago but it didn't answer my
problem. I am on Mdk 10 and in order to get my Traveling Disk 2.0 USB Flash
Drive to work I had to make a directory /mnt/memstick then mount it using
On Sunday 03 Oct 2004 13:40, Lanman wrote:
Simon, Check to see if you have hotplug installed and that it's
starting at boot time,
It was installed but not running or set to start at boot. I have now set it to
run at boot and it is doing so.
then make sure that you've configured your
On Sunday 03 Oct 2004 14:40, Simon Utley wrote:
I rebooted and plugged in the USB drive, its led flickered but no icon on
the desktop and when I checked the device had not been mounted
I have created a Desktop icon that, when I am in my Desktop as root, enables
me just to click on it and
List,
I tried posting a thread concerning this problem last week but w/o much
help. I recently changed my user password (at a moment of minor paranoia
about a misperceived system compromise). Well, this is where my problem
begins.
From gdm I can login, and my desktop appears. Now if I want to
-- Forwarded message --
From: csalinux [EMAIL PROTECTED]
Date: Sun, 3 Oct 2004 19:31:35 +0200
Subject: Asunto: Re: [newbie-es] Escribir en la Particion Windows
To: Tici? [EMAIL PROTECTED]
Puedes utilizar captive. Es un programa que utiliza el driver de grabaci?n
del NTFS. Yo no lo
Terence Golightly wrote:
List,
I tried posting a thread concerning this problem last week but w/o much
help. I recently changed my user password (at a moment of minor paranoia
about a misperceived system compromise). Well, this is where my problem
begins.
From gdm I can login, and my
On Sun, 2004-10-03 at 18:25, Merlin Zener wrote:
Well last night I sent off a happy email telling of my success...
This morning I log on to find that Evolution won't start up :(
[For those who were not followwing the earlier thread, I just upgraded
from Mandrake 9.0 to 10.0]
Now when
I've just installed qcad on my mdk 10.0 but there isn't any object libraries. So I
went to the qcad site and downloaded the partlibrary.zip file. So far so good :-)
The problem is that the library I downloaded doesn't appear in the object browser of
qcad. How to install those libraries? I
On Sunday 03 October 2004 12:20 pm, Michel Leunen wrote:
I've just installed qcad on my mdk 10.0 but there isn't any object
libraries. So I went to the qcad site and downloaded the partlibrary.zip
file. So far so good :-) The problem is that the library I downloaded
doesn't appear in the
W licie z nie, 03-10-2004, godz. 21:20, Michel Leunen pisze:
I've just installed qcad on my mdk 10.0 but there isn't any object
libraries. So I went to the qcad site and downloaded the
partlibrary.zip file. So far so good :-)
The problem is that the library I downloaded doesn't appear in the
I installed Afterstep 2.0 yesterday, I like the looks, but it will take some
figuring out after all these years of using KDE. Question I have is adding
AS to my login manager. I've added 08AfterStep to my /etc/X11/wmsession.d
file as such:
NAME=AFTERSTEP
DESC=Afterstep
On Sunday 03 October 2004 12:47 pm, Thereidos wrote:
W licie z nie, 03-10-2004, godz. 21:20, Michel Leunen pisze:
I've just installed qcad on my mdk 10.0 but there isn't any object
libraries. So I went to the qcad site and downloaded the
partlibrary.zip file. So far so good :-)
The
On Sunday 03 October 2004 02:48 pm, Chris wrote:
I forgot to add that #chksession -l shows this:
[EMAIL PROTECTED] chris]# chksession -l
KDE GNOME WindowMaker Enlightenment BlackBox XFce IceWM AFTERSTEP default
failsafeAFTERSTEP default failsafe
I can't figure out why it shows up as AFTERSTEP
On Mon, 2004-10-04 at 05:48, Chris wrote:
I installed Afterstep 2.0 yesterday, I like the looks, but it will take some
figuring out after all these years of using KDE. Question I have is adding
AS to my login manager. I've added 08AfterStep to my /etc/X11/wmsession.d
file as such:
aron Smith wrote:
BTW .zip files are for windows
Yes, I know but that's the only file type available on the qcad website. I didn't have
any other choice.
Thanks.
Michel
Want to buy your Pack or Services from MandrakeSoft?
Go to
Thereidos wrote:
Free translation from Polish:
Edit/Application preferences/Paths
There you have to add the path to were you placed part library.
I've tried this with no luck. No object appears in the Object browser.
Michel
Want to buy
aron Smith wrote:
Is that lib avabile as a .tar or tar gz?
.zip is a windows compression scheme
No! I had no choice. There is only one library available on the web site and it's a
.zip file. I suppose it's because it's the same lib for windows and linux. Anyway, I
don't think it makes a
On Sunday 03 October 2004 03:00 pm, Stephen Kühn wrote:
In all honesty, I prefer launching WM's from runlevel 3 - as you give
yourself more system resource without having the DM running - and if you
take that as the case, you can install Xtart which will identify most of
the installed WM's
On Sunday 03 October 2004 02:23, Merlin Zener wrote:
Hi all,
well I did it!!! :)
Good for you, Merlin.
Looking forward to more posts from you:)
--
Good luck,
HarM
Want to buy your Pack or Services from MandrakeSoft?
Go to
On Saturday 02 October 2004 04:00, Carroll Grigsby wrote:
Harm:
Save wear and tear on your nervous system. Why not use KMail's Reply to
list feature?
I'll just have to change my habits and hit l instead of r.
Seems a bit topsy-turvy though.I have to change my habits because some
On Mon, 2004-10-04 at 06:10, Chris wrote:
On Sunday 03 October 2004 03:00 pm, Stephen Kühn wrote:
In all honesty, I prefer launching WM's from runlevel 3 - as you give
yourself more system resource without having the DM running - and if you
take that as the case, you can install Xtart
On Sunday 03 October 2004 12:20 pm, Michel Leunen wrote:
as root (assuming you have urpmi set up
type urpmi qcad
Ok, Tried that. Answer from the system:
Everything already installed.
So I assume everything was correctly installed and indeed, everything seems to be ok
since I can use qcad.
On Sunday 03 October 2004 03:22 pm, Stephen Kühn wrote:
Edit the /etc/inittab and where you see the default is 5, change it to
3, reboot, login to the console as yourself, then run Xtart to choose
from whatever installed WM's you have (and you might find that
performance overall is heaps
I've got Xtart installed Stephen, one question though, how to
boot into rl 3?
Edit the /etc/inittab and where you see the default is 5, change
it to 3, reboot, login to the console as yourself, then run Xtart
to choose from whatever installed WM's you have (and you might
find that
aron Smith wrote:
BTW .zip files are for windows
That's a ridiculous statement.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
On Sun, Oct 03, 2004 at 02:48:26PM -0500, Chris wrote:
I installed Afterstep 2.0 yesterday, I like the looks, but it will take some
figuring out after all these years of using KDE. Question I have is adding
AS to my login manager. I've added 08AfterStep to my /etc/X11/wmsession.d
file as
W licie z nie, 03-10-2004, godz. 22:02, Michel Leunen pisze:
aron Smith wrote:
BTW .zip files are for windows
Yes, I know but that's the only file type available on the qcad
website. I didn't have any other choice.
Thanks.
These files are in .zip format 'cause surely it's supported in
W licie z nie, 03-10-2004, godz. 22:05, Michel Leunen pisze:
Thereidos wrote:
Free translation from Polish:
Edit/Application preferences/Paths
There you have to add the path to were you placed part library.
I've tried this with no luck. No object appears in the Object browser.
On Sunday 03 October 2004 05:28 pm, Todd Slater wrote:
So, can someone lead me down the correct path? I'm sure its easy but I
just can't seem to locate the problem.
I believe the NAME you gave in wmsession.d is case-sensitive, so in
kdmrc you have AfterStep where is should be AFTERSTEP.
On Sunday 03 October 2004 22:44, Eric Huff wrote:
I always boot at level 3, but at the same time i am lazy and don't
like to have to start X after i login.
So i have my .bash_profile setup so that if i log into tty 1, it
automagically launches my favorite window manager, sylpheed, rox and
On Sunday 03 October 2004 03:36 pm, Thereidos wrote:
W licie z nie, 03-10-2004, godz. 22:02, Michel Leunen pisze:
aron Smith wrote:
BTW .zip files are for windows
Yes, I know but that's the only file type available on the qcad
website. I didn't have any other choice.
Thanks.
These
On Sunday 03 October 2004 01:26 pm, Michel Leunen wrote:
On Sunday 03 October 2004 12:20 pm, Michel Leunen wrote:
as root (assuming you have urpmi set up
type urpmi qcad
Ok, Tried that. Answer from the system:
Everything already installed.
So I assume everything was correctly installed
On Sun, Oct 03, 2004 at 05:41:06PM -0500, Chris wrote:
On Sunday 03 October 2004 05:28 pm, Todd Slater wrote:
So, can someone lead me down the correct path? I'm sure its easy but I
just can't seem to locate the problem.
I believe the NAME you gave in wmsession.d is case-sensitive, so
On Sunday 03 October 2004 05:56 pm, Todd Slater wrote:
Oh one more thing I just remembered, 01-18 is reserved my MDK, so
if you're adding a new wm you need to start at 19. DK if that'll make
any difference or not.
Todd
I renamed the 08AfterStep I had in /etc/X11/wmsession.d
to
Hello,
I'm helping my friend Kurt Ritchie who recently switched to Linux.
( His Linux switch story is here:
http://mark.stosberg.com/Tech/linux_switch/ritchie.html ).
I recently gave him my 10.0 CD set as I anticipate the new release
coming out.
So here's the 9.2 - 10.0 upgrade problem I'm
42 matches
Mail list logo
