mike wrote:
I have a problem with decrypting my sent messages.
Been expermenting with gnupg. When I send a signed and encrypted
message to someone who has my key they get it and can read it fine
and I have their key and can decrypt an encrypted message from them.
But when I go to my *Sent* box
Dear All
I am using the default firewall of Mandrake 10.1 and I would like to
configure it in the following way:
* It must allow an outbound (originating at the host and connecting to the
server) a TCP/IP connection with destination port 1723.
* It must also allow protocol 47 (known as GRE)
John Layt wrote:
On Sat, 15 Jan 2005 07:38, Rhein Christophe wrote:
Hello,
I have still the same problem watching DVDs other then type 2 PAL on my
Acer Aspire 1680 with DVD combo burner.
I have now Kaffeine, Xine, MPlayer, Totem installed and none is working.
I installed libdvdcss2 on the
On Sun, 16 Jan 2005 22:59, Rhein Christophe wrote:
Ok I installed all the packages and still I get the error message. How
can I know where the libdvdcss2 is installed on my machine?
Where should it be locateted?
Thank you
Christophe
Very strange. Should be in /usr/lib.
John.
Hi
other than my unasnwered kword problem ... what is the ebst way to resize a
partition and make another one?
I have parted and started it up and got this message:
(snip: GPL junk)
Using /dev/ide/host0/bus0/target0/lun0/disc
Error: The partition table on /dev/ide/host0/bus0/target0/lun0/disc
On Sun, 16 Jan 2005 14:14:09 +0100
Martin Hardie [EMAIL PROTECTED] wrote:
other than my unasnwered kword problem ... what is the ebst way to
resize a partition and make another one?
Martin,
You can use MCC to setup your partitions. Open up Mandrake Control
Center, Mount Points, Partitions -
On Sunday 16 January 2005 06:41 am, John Layt wrote:
On Sun, 16 Jan 2005 22:59, Rhein Christophe wrote:
Ok I installed all the packages and still I get the error message. How
can I know where the libdvdcss2 is installed on my machine?
Where should it be locateted?
Thank you
Christophe
Steve
I tried it with MCC but I only have the one partition set up (eg swap home
and /) so I think I need to resize it with the boot disk to start with -NO?
my kword request was I downloaded it and installed it but it wont open
Hi
I urpmied koffice in my quest for a pdf translation method. it
On Sunday 16 January 2005 14:49, Steve Jeppesen wrote:
I do not recall seeing your kword post, but if it was like this one,
and you hijacked somebodies else's post, well your question made it
to probably 50 percent or even less of the list members.
Steve I dont think i hijacked anyones post -
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 16 Jan 2005 14:01, Martin Hardie wrote:
On Sunday 16 January 2005 14:49, Steve Jeppesen wrote:
I do not recall seeing your kword post, but if it was like this one,
and you hijacked somebodies else's post, well your question made it
to
On Sunday 16 January 2005 15:30, Anne Wilson wrote:
On Sunday 16 Jan 2005 14:01, Martin Hardie wrote:
On Sunday 16 January 2005 14:49, Steve Jeppesen wrote:
I do not recall seeing your kword post, but if it was like this one,
and you hijacked somebodies else's post, well your question
On Sun, 16 Jan 2005 14:59:40 +0100
Martin Hardie [EMAIL PROTECTED] wrote:
Steve
I tried it with MCC but I only have the one partition set up (eg
swap home and /) so I think I need to resize it with the boot disk
to start with -NO?
you are correct, I was unaware of what number and or active
On Sunday 16 January 2005 09:52 am, Steve Jeppesen wrote:
On Sun, 16 Jan 2005 14:59:40 +0100
Martin Hardie [EMAIL PROTECTED] wrote:
Steve
I tried it with MCC but I only have the one partition set up (eg
swap home and /) so I think I need to resize it with the boot disk
to start with
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 16 Jan 2005 15:16, et wrote:
On Sunday 16 January 2005 09:52 am, Steve Jeppesen wrote:
my kword request was I downloaded it and installed it but it wont
open
Sorry about this one Martin, use Sylpheed-Claws myself. Little to
no
i want to use curl function(PHP, PERL) and i have tried install
libcurl3-devel-7.12.1. Before i
installed libcurl3-7.12.1. on Mandrake 10.1.
system print out
error: Failed dependencies:
devel(libcrypto) is needed by libcurl3-devel-7.12.1-1mdk
devel(libidn) is needed by libcurl3-devel-7.12.1-1mdk
On Sunday 16 January 2005 16:32, Anne Wilson wrote:
On Sunday 16 Jan 2005 15:16, et wrote:
On Sunday 16 January 2005 09:52 am, Steve Jeppesen wrote:
my kword request was I downloaded it and installed it but it wont
open
Sorry about this one Martin, use Sylpheed-Claws myself.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 16 Jan 2005 15:36, Martin Hardie wrote:
what happens if you in a console, as user type (without the quotes)
kword
And - when you say it won't open - is there any error message, or just an
apparent attempt to open, which
On Sat, 15 Jan 2005 23:18:54 -0500, RickSisler [EMAIL PROTECTED] wrote:
Elwyn ([EMAIL PROTECTED]) wrote:
Looking for a program that can show a meter on the screen about the
throughput
of the network card selected (ie eth0)
On Windows I have the use of a program called DU Meter but I can't
Rhein Christophe wrote:
John Layt wrote:
On Sat, 15 Jan 2005 07:38, Rhein Christophe wrote:
Hello,
I have still the same problem watching DVDs other then type 2 PAL on my
Acer Aspire 1680 with DVD combo burner.
I have now Kaffeine, Xine, MPlayer, Totem installed and none is
working.
I
On Sunday 16 January 2005 17:04, Anne Wilson wrote:
On Sunday 16 Jan 2005 15:36, Martin Hardie wrote:
what happens if you in a console, as user type (without the quotes)
kword
And - when you say it won't open - is there any error message, or just
an apparent attempt to open,
Charles Lee Ying wrote:
mike wrote:
I have a problem with decrypting my sent messages.
Been expermenting with gnupg. When I send a signed and encrypted
message to someone who has my key they get it and can read it fine
and I have their key and can decrypt an encrypted message from
them.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 16 Jan 2005 17:08, Martin Hardie wrote:
On Sunday 16 January 2005 17:04, Anne Wilson wrote:
i used urpmi and got all the dependencies it wanted. But i suppose i could
just uninstall and try again
No, not yet. Part of the problem with
Hi all
Can K3b copy DVDs ? I have a norton ghost image on a rewriteable DVD
and I
need to burn it onto a write once disk to free up the rewriteable one? If K3b
can't do it any ideas.
--
Guy Fualks - The only man to enter the houses of Parliament with honest
intentions, (he was going
On Sun, 16 Jan 2005 18:02:03 +
John Bowden [EMAIL PROTECTED] wrote:
Hi all
Can K3b copy DVDs ? I have a norton ghost image on a
rewriteable DVD
and I
need to burn it onto a write once disk to free up the rewriteable
one? If K3b can't do it any ideas.
That should not be
On January 16, 2005 12:08 pm, Martin Hardie wrote:
On Sunday 16 January 2005 17:04, Anne Wilson wrote:
On Sunday 16 Jan 2005 15:36, Martin Hardie wrote:
what happens if you in a console, as user type (without the
quotes) kword
And - when you say it won't open - is there any
On Sunday 16 January 2005 06:57 pm, Anne Wilson wrote:
On Sunday 16 Jan 2005 17:08, Martin Hardie wrote:
On Sunday 16 January 2005 17:04, Anne Wilson wrote:
i used urpmi and got all the dependencies it wanted. But i suppose i
could just uninstall and try again
No, not yet. Part of the
On Sunday 16 Jan 2005 18:33, Anders Lind wrote:
On Sun, 16 Jan 2005 18:02:03 +
John Bowden [EMAIL PROTECTED] wrote:
Hi all
Can K3b copy DVDs ? I have a norton ghost image on a
rewriteable DVD
and I
need to burn it onto a write once disk to free up the rewriteable
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 16 Jan 2005 18:20, Dan Gordon wrote:
On January 16, 2005 12:08 pm, Martin Hardie wrote:
What you can do with Mandrake control center is open the software
install program and do a search. In the drop down menu select in
file name then
Forwading this coz maybe some people like this sort of proaganda!
/snip
...
/unsnip
Frederick Noronha (FN) [EMAIL PROTECTED]
Issue 1 Volume 1 of this new magazine has just hit the (cyber)stands. And,
don't be too surprised, you're free to download a copy too of this 78-page
publication. Some of
Thank you for all your replies. I have noticed a lot of the messages came
direct rather than to the email list...
I have gone for Gkrellm and it seems to the job and a few others as well :)
Cheers
Elwyn
Want to buy your Pack or Services
On Sunday 16 Jan 2005 19:44, you wrote:
Elwyn wrote:
Thank you for all your replies. I have noticed a lot of the messages came
direct rather than to the email list...
You need to remove your ReplyTo in your email or change it to
newbie@linux-mandrake.com
Then all the replys go to list.
I'm trying to install Cubit which requires postgresql. But I keep getting this
error:
psql: FATAL: IDENT authentication failed for user pguser
when I type
psql -U pguser
I've googled on the error and made changes to pg_ident.conf and pg_hba.conf as
suggested but I still get the error,
mike wrote:
I have a problem with decrypting my sent messages.
Been expermenting with gnupg. When I send a signed and encrypted
message to someone who has my key they get it and can read it fine
and I have their key and can decrypt an encrypted message from them.
But when I go to my *Sent*
mike wrote:
mike wrote:
I have a problem with decrypting my sent messages.
Been expermenting with gnupg. When I send a signed and encrypted
message to someone who has my key they get it and can read it fine
and I have their key and can decrypt an encrypted message from them.
But when I go to my
Under GNOME and Mandrake 9.2 I have managed to get OpenOffice to start up in
3 or 4 seconds, which is fine. But, out of curiosity I installed oooqs from the
PowerPack DVD and invoked it. The first problem was that it started
kbuildsycoca,
which always takes time and usually spits out a dozen
On Sun, 16 Jan 2005 22:41:41 +1100
John Layt [EMAIL PROTECTED] wrote:
On Sun, 16 Jan 2005 22:59, Rhein Christophe wrote:
Ok I installed all the packages and still I get the error message. How
can I know where the libdvdcss2 is installed on my machine?
Where should it be locateted?
Has anyone tried this app yet? If so, were there any problems?
Desktop Environment :: K Desktop Environment (KDE)
System :: Installation/Setup
About: Konstruct is a build system which helps you install KDE releases
and applications on your system. It downloads defined source tarballs,
checks
On Sunday 16 January 2005 01:27 pm, Elwyn wrote:
Thank you for all your replies. I have noticed a lot of the messages came
direct rather than to the email list...
I have gone for Gkrellm and it seems to the job and a few others as well :)
Cheers
Elwyn
You have your reply to: set to
On Wednesday 12 January 2005 12:30 pm, Tom Brinkman wrote:
On Wednesday 12 January 2005 08:30 am, David Reynolds wrote:
Okay, I need to back up some of my data and, more importantly,
burn my 10.1 ISOs before I reinstall (to fix the libgcc error
my machine developed on the last install).
Charles Lee Ying wrote:
mike wrote:
mike wrote:
I have a problem with decrypting my sent messages.
Been expermenting with gnupg. When I send a signed and encrypted
message to someone who has my key they get it and can read it fine
and I have their key and can decrypt an encrypted
Just wondering if anyone has had success using a wireless mouse on
M10.1? I can't seem to get the basic mouse from MS to work correct.
I'm using a USB to PS2 adapter. It should function like a standard PS2
3-button mouse w/ scroll wheel.
Thanks!
--
Regards,
Matt Florido
Matt Florido wrote:
Just wondering if anyone has had success using a wireless mouse on
M10.1? I can't seem to get the basic mouse from MS to work correct.
I'm using a USB to PS2 adapter. It should function like a standard PS2
3-button mouse w/ scroll wheel.
Thanks!
Dumb question time...
1: By
I have tried several times to get Mandrake version 10.1 to recognize my
external USB ( Maxtor Diamond Max) hard drive. If I turn it on before
or during bootup it seems to freeze the booting process. It is not
recognized. Actually listed hardware states it is a unknown device. If
I turn it on
very good sir, here is what the file
/etc/modprobe.conf contains:
# This file is autogenerated from /etc/modules.conf
using generate-modprobe.conf command
alias eth0 via-rhine
remove snd-emu10k1 /sbin/modprobe --first-time -r
--ignore-remove snd-emu10k1
install snd-emu10k1 /sbin/modprobe
* Mikkel L. Ellertson [EMAIL PROTECTED] [01-16-2005 22:27]:
Matt Florido wrote:
Just wondering if anyone has had success using a wireless mouse on
M10.1? I can't seem to get the basic mouse from MS to work correct.
I'm using a USB to PS2 adapter. It should function like a standard PS2
On Monday 17 January 2005 12:47 am, John Retermeyer wrote:
alias sound-slot-0 audigy
# --- END: Generated by ALSACONF, do not edit. ---
But you don't have an audigy. Shouldn't this be snd-emu10k1, like this
alias sound-slot-0 snd-emu10k1
and this should not be there
alias snd-0
Il lun, 2005-01-17 alle 01:39, Len Lawrence ha scritto:
Under GNOME and Mandrake 9.2 I have managed to get OpenOffice to start up in
3 or 4 seconds, which is fine. But, out of curiosity I installed oooqs from
the
PowerPack DVD and invoked it. The first problem was that it started
On Sunday 16 January 2005 09:49 pm, Matt Florido wrote:
* Mikkel L. Ellertson [EMAIL PROTECTED] [01-16-2005 22:27]:
Matt Florido wrote:
Just wondering if anyone has had success using a wireless mouse on
M10.1? I can't seem to get the basic mouse from MS to work correct.
I'm using a USB
48 matches
Mail list logo
