that also. If Linux was on it's own native partition's, whatever Windows does,
will not usually affect Linux.
Ideally, Linux should run from it's own Linux Native filesystem to really get
the full benefit of Linux.
HTH
Jaguar
[EMAIL PROTECTED] wrote:
I have one question for you, and for everyone
for resizing, and follow those directions as close as you can.
Also a full/total backup of your Windows DATA, would be nice in case of
failure.
HTH
Jaguar
[EMAIL PROTECTED] wrote:
Hi Dan,
Thanks for the helpful suggestions, and thanks to everyone for all of the
helpful suggestions. There are a few
just about all the ftp download
sites in plain text, HTML, .pfd and postscript. This is a very
common and easily solveble thing, and shouldn't be any trouble
for you once you have it set up. Try:
$ man samba
too.
Bill.
- Original Message -----
From: Jaguar [EMAIL PROTECTED]
s, and
get more confused...then ask for additional help in here...:)
HTH
Jaguar
"Jacob Aaron Holbrook" [EMAIL PROTECTED] wrote:
-
Attachment:
MIME Type: multipart/alternative
-
I
Have you taken into account if a video card is using some of the system RAM??
ie: 192 RAM - 4 MB video = 188RAM
Just a thought...:)
Jaguar
Charles Wackerman [EMAIL PROTECTED] wrote:
David:
I also tried the append="mem=192M" in lilo.conf and then lilo at the
prompt,
didn't wor
Apparently there is also a Windows version of Samba...called Sambar, maybe
that is what your looking for??
HTH
Jaguar
Nicholas Horton [EMAIL PROTECTED] wrote:
As far as I know that is what SAMBA was for. www.samba.org
Nick Horton
1998 Cavalier Z24 5-Speed
Weapon-R Intake, RKSport Front
I think the last problem to overcome is if the modem is a Winmodem?
You should determine if your modem is a hardware modem, or one that is
supported by Linux.
HTH
Jaguar
"Rich" [EMAIL PROTECTED] wrote:
I found it in the windows registry under the program that causes the cable
mod
Please use the correct terminology...those NIC's are "RJ45", the other two
types are "COMBO" cards, and "Thin-Net Coax".
I would recommend 3COM as they are well supported. With the possible exception
of the 3C905, where some confusion remains as to the correct dri
???
If you are SOO knowledgable please excuse yourself from our newbieness,
and hop on over to the expert list.
My $0.02 worth.
Jaguar
"Stephen F. Bosch" [EMAIL PROTECTED] wrote:
Mark Chaikelson wrote:
If I'm interpreting what you said correctly ...
First set up the linux ga
If you just want to do a few things as ROOT ie: install an RPM, open a
Konsole, and type "su" then root's password.
If you want to do a bunch of things, probably logout and back in as ROOT.
HTH
Jaguar
andy barnes [EMAIL PROTECTED] wrote:
What is the quickest, easiest and safest ro
is above
MEDIUM, lower it a little then try again. You can lower it through DrakConf
icon on desktop.
HTH
Jaguar
"Derk Hanro" [EMAIL PROTECTED] wrote:
Hi everyone, I am having some problems setting up an x server and was hoping
that someone could help me out.
I installed mandrake 7.0 (
More info please
Was it ever in color? (Netscape is kinda washed out for color in Linux)
Is your vid card/monitor setup correctly?
Is your video color depth more than 256?
Martin Solms [EMAIL PROTECTED] wrote:
Hi
My Netscape Communicator is launching in black and white rather than the
colour
I am just wondering how this person "SUSCRIBED" in the first place...I think
this person should invest in a dictionary for the proper spelling.
Also if he went back to the original place he "SUSCRIBED", there is a link
there to "UNSUSCRIBE" :)
My poke in the ribs...
MDK 7.0 has known install bugs...try using 7.02
HTH
Jaguar
"Huelskamp, VT" [EMAIL PROTECTED] wrote:
I take it that no one has any idea??
-Original Message-
From: Huelskamp, VT
Sent: Monday, April 10, 2000 3:27 PM
To: '[EMAIL PROTECTED]@inter2'
Subject: [newbie] In
Integrated chipsets (sound/vid/LAN/etc...) are not worth the hassle trying to
configure in Linux
HTH
Jaguar
KompuKit [EMAIL PROTECTED] wrote:
I was wondering...if this motherboard...and its features/hardware
will work under linux...anyone know for sure...let me know?
just click oh the link
nsible for firewalls, or
protection of their clients data.
So in other words...YES, set up a firewall, and whatever other security you
think is appropriate.
HTH
Jaguar
Vic [EMAIL PROTECTED] wrote:
I have a cablemodem on a dynamic address,
not static, should I set up a firewall?
I'm co
, and a few other HOWTO's, and it has left me more confused, than
when I started. I think where I am stumped now is the broadcasting (because
the sever light is _NOT_ flashing on the hub) from the second NIC in my Linux
box?
Opinons?
Jaguar
but @Home should at least
acknowledge some responsibility.
Linux content:
Is Linux vulnerable to similar Port Flooding, ICMP Port Scan's, etc???
Jaguar
"Stephen F. Bosch" [EMAIL PROTECTED] wrote:
Jaguar wrote:
After having "script-kiddies" try to "DNS Malformed&
When Linux is booting...just when the LILO prompt is there you have about 5
secs. to type "linux 3" --with out quotes, and it will boot to Console mode,
bypassing XWindow.
HTH
Jaguar
"Xavier Michalet" [EMAIL PROTECTED] wrote:
Hi,
I am the person who originally posted thi
Yes, or "setup" or XF86Config" or ..(which ever you feel comfy with)
"West, Kenneth" [EMAIL PROTECTED] wrote:
Jaguar,
Do you mean go into xf86config and choose a generic monitor?
Thanks
-Original Message-----
From: Jaguar [mailto:[EMAIL PRO
I believe the ATI MACH 64 will work with your vid card.
Type "setup" in a console/command line and try a GENERIC Mouse driver, if you
can find the exact driver for your mouse
BTW...what kind of mouse is it??
HTH
Jaguar
"West, Kenneth" [EMAIL PROTECTED] wrote:
I got th
Here's a thought...I have seen a few people say they did NOT subscribe to this
Mail List. Why not send a confirmation email before actually starting their
subscription??
Just a thought for list admin. :)
Jaguar
Get your own
h has it's strengths and weaknesses. So why make a statement
like "WINDOWS SUCKS @$$!" and then proceed to ask how you can use it with your
Winmodem??
"bryan pryor" [EMAIL PROTECTED] wrote:
Yo Jaguar,
If you would have read the email, you'd realize that I want to p
Try GENERIC MONITOR, or GENERIC MULTISYNC
HTH
Jaguar
"West, Kenneth" [EMAIL PROTECTED] wrote:
Bryan,
ctl-alt-plus or ctl-alt-minus has no affect at all.
I am tried the xf86config. I was instructed to look in this file:
/usr/X11R6/lib/X11/doc/monitors, and
Is you video card sharing system RAM? if so you will have to subtract that
amount from the total.
HTH
Jaguar
Manolis Tzanidakis [EMAIL PROTECTED] wrote:
-
Attachment:
MIME Type: multipart/alternative
$0.02 worth
Jaguar
"bryan pryor" [EMAIL PROTECTED] wrote:
Let me just get this out of the way. WINDOWS SUCKS @$$! Ok, I feel better
now. I'm trying to go with a dual boot win98/mandrake 7.0 system b/c i
can't get my modem to work with linux and have run out of $$$. So
Thx I will try this...and let you know...:)
Jaguar
flupke [EMAIL PROTECTED] wrote:
Here are the main steps to share your internet connection :
First thing to do : setup your LAN. While you can't ping any machine
from any other machine, you'll be in trouble.
Then : setup your gateway's
have you setup your X yet, if so just type "startx" --without quotes
if that doesn't work, you will have to setup X using one of the many config
tools (setup, xf86config, XF86Setup (bear in mind these commands ARE case
sensitive))
HTH
Jaguar
"Rod Mailhot" [EM
First of all why are you using KPPP (which is modem dial-up) with a NIC, if
you have one-way Cable, DSL, ADSL, ISDN, then yes...but if your Net connect is
2-way cable, DSL, etc...you don't use KPPP.
Second, have you installed the FAX RPM from your CD?
HTH
Jaguar
James Kirkpatrick [EMAIL
a valued body part in
exchange...:)
Please help me...
TIA
Jaguar
PS: the Win 98SE #1 box is just sitting there connected...but not doing
much...I can use that as a test system for the network, Win98SE#2 is the Win
box I do most of my surfing with...at least till I get the MDK working
correctly then I
2 instead...
but when I tried to login using lnux 2...it said no such image...
also tried linux 3...with same replywhat else can be done?
Jaguar wrote:
Reset the monitor to GENERIC before changing monitor's, and login using
the
LINUX 3 then ROOT to check the setup (with setup, xco
First you "cd" to the install DIR...the type "./configure" --that is DOT then
slash, this tells the configure command to run IN the DIR your in.
HTH
Jaguar
[EMAIL PROTECTED] wrote:
Tried - the "config" command is not found, either.
"forstfed&
Ok...start KMail...then choose FILESETTINGSthen NETWORK TABhighlight email
to setchoose MODIFYthen there are check boxes to set for automagically
checking email/leave on server/etc... (you are stuck with their time interval,
probably about 10 mins)
HTH
Jaguar
Joseph S Gardner [EMAIL PROTECTED
Reset the monitor to GENERIC before changing monitor's, and login using the
LINUX 3 then ROOT to check the setup (with setup, xconfigurator, XF86Setup,
xf86configyour choice) and adjust as needed.
HTH
Jaguar
KompuKit [EMAIL PROTECTED] wrote:
I'm not sure you understand...
I need a safe
, plugins
are safe. After this proceedure, my Nutscrape came up without a problem with
my plugin's, and I think my bookmarks also. You might want to back-up your
bookmark file first though.
HTH
Jaguar
KompuKit [EMAIL PROTECTED] wrote:
which file(s) do I download for the 4.72 update...
will it work
I believe I heard someone say that a Zip disk must be in the drive during boot
up. I could be wrong...:)
HTH
Jaguar
Jon [EMAIL PROTECTED] wrote:
Kirk McElhearn wrote:
Every time I try to boot with Mandrake 7, the init hangs when trying to
get the partition table of my zip drive at hdc
uot; to do the
final tweaking on my video/monitor setup. As a side note, I have tried
"xvidtune" and all it does is crash my Xserver. My vid card is a Newcom 4 MB
PCI w/CL5465 chipset, and a Sceptre 14" PnP monitor, my vid settings for X are
1024X768 32 Bit color.
HTH
Jaguar
"E
Roger Bird [EMAIL PROTECTED] wrote:
I did a dumb thing on the weekend. My machine had been running
perfectly-sound, internet, x-windows. I wanted to make it more secure
since I am on cable @home.
After doing some reading I went into startup services in x (as root of
course) and must have
XFree 4.0 is still BETA, I suggest you re-install from your MDK CD, whatever
version is on it
HTH
Jaguar
"magick" [EMAIL PROTECTED] wrote:
-
Attachment:
MIME Type: multipart/a
Mike Fieschko [EMAIL PROTECTED] wrote:
"Jaguar" == Jaguar [EMAIL PROTECTED] writes:
Jaguar I wrote to the list a few days ago, asking for some
Jaguar help...the _ONLY_ reply I got was, RTFM...well I have
Jaguar RTFM's till I am more confused. I want
I have a Cyrix MediaGX P233 kit board w/64 RAM, vid (not used, not supported),
sound built into the mobo. Is there a write up or chart somewhere with
approx. performance/bogomips for different speeds/styles (Intel, AMD, Cyrix)
of CPU?
TIA
Jaguar
PS. this box is running at 77 BOGO Mips
like the right module
wasn't loaded. I should be able to figure out by this
weekend.
--- Jaguar [EMAIL PROTECTED] wrote:
I think much of the problem is the Realtek card is a
cheap piece of crap.
Spend a few more $$ and
__
Do
r box (you might have to
point it to the ICON subDIR for the list). Choose the icon you like..:)
Note: I could be wrong on the navigation to settings...but that is where you
change the user icon on the login screen.
HTH
Jaguar
Antonio Carlos Ribeiro Nogueira [EMAIL PROTECTED] wrote:
ma
me yes or no???
I have run the /proc/(something's??)/ip_chains, and got PERMISSION DENIED ,
and yes as ROOT.
Is there a HOWTO posted on installing/setting up IPCHAINS for sharing a cable
modem over a network?
Jaguar
Get your
I think much of the problem is the Realtek card is a cheap piece of crap.
Spend a few more $$ and
Jaguar [EMAIL PROTECTED] wrote:
I think much of the problem is the Realtek card is a
MandrakeUpdate RPM on your install CD...:)
Jaguar
James [EMAIL PROTECTED] wrote:
For some reason, when I installed 7.02 I didn't get the update utility on
my desktop. I had in when I used 6.1. How can I get this utility back?
I'm certain it isn't installed on my system because when I open
X11/xdm/xservers
add a "-bpp 24" ---with this spacing and your color depth
to line "0 local /usr/X11RS/bin/X "
so that it looks like this one
:0 local /usr/X11RS/bin/X -bpp 24
HTH
Jaguar
James [EMAIL PROTECTED] wrote:
I've tried various X-windows interfaces and I am amazed
Not long ago Denis of MandrakeSoft stated categorically that Yamaha sound
cards are not well supported in Linux. Maybe just spend $10 or $20 for a
different sound card.
HTH
Jaguar
Simon Robertson [EMAIL PROTECTED] wrote:
Hello,
I run 'soundconfig' in an Xterm each time i configure my
I know Cirrus Logic has an 56k/v.90 ISA hardware/jumpered modem for about
$40.00 or less.
HTH
Jaguar
jero [EMAIL PROTECTED] wrote:
KompuKit wrote:
I'm going to be buying a new 56k external modem...for
my linux box...this week, I was wondering which one I should buy...
and which one
s for slightly older books on
Linux or related, some of them are good reference's and some of them have CD's
with them...:)
HTH
Jaguar
Philomena [EMAIL PROTECTED] wrote:
Hi all,
Can anyone recommend a few good startup Linux books ? There are too many
out there now to start sampling. Any help
Laprass...buddy, dude
Could you turn off receipt's or quit doing whatever you are doing to echo this
message back to the list.
Thanks
Jaguar
root [EMAIL PROTECTED] wrote:
root wrote:
Richard wrote:
well sorta first I have to wait for a while then it says an error
message
[EMAIL
dling???
HTH
Jaguar
"Pittman, Merle" [EMAIL PROTECTED] wrote:
Mandrake has many screen savers (setting desktop). Screen savers are
for
the purpose of prevent burn-in on your monitor screen, it has nothing to do
with your operating system. Many new monitors don't need screen savers
anyw
Can anyone shed some light on this error??
I was trying to compile from a fresh install of 7.02 using Expert/Normal
checking for X... configure: error: Can't find X includes. Please check your
installation and add the correct paths!
Once your driver is correct your problems are fixed.
HTH
Jaguar
James [EMAIL PROTECTED] wrote:
Ok, now I have my mouse working just fine when I am in the console (just
before issuing startX), but when I start Xwindows, my mouse cursor starts
in the center of the gray window, but as soon as the
take a try at it...but I am not a
programmer.
another $0.02 worth
Jaguar
Michael George [EMAIL PROTECTED] wrote:
On Apr 25, Jaguar wrote:
Wow...a bunch of whiner's!!! (although a 2 MB file is quite large)
Oh, you think so? Considering most list mail is 3Kb, I'd say 2.8Mb is
pretty
dang big!
Wow Jon...a ton of great info...thx.:)
Jaguar
Jon Hunter [EMAIL PROTECTED] wrote:
The "I wanna get my cable modem working" Howto
Your cable modem works in Windoze, but not in Linux?
Boot into Windows and open your email or web browser and
make SURE it
I also have a Cyrix Media GX 233 w/MDK 7.02, and DrakX reports the MHz as 121,
@77 BOGOMips, the speed is good here...
jeff [EMAIL PROTECTED] wrote:
Ernie wrote:
This is true...
E
-Original Message-
From: Jaguar [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 15
You are using the Roger's@Home service in Ontario, so am I. I successfully
connect without using DHCP.
I just put all the correct info in...then it's done. All the DHCP does is
update the IP lease. My IP is static as your likely is.
HTH
Jaguar
Roger Bird [EMAIL PROTECTED] wrote:
I finally
. The leases for
the IP is just a technicality so they can enforce rules if they wish.
HTH
Jaguar
sujee [EMAIL PROTECTED] wrote:
bosco wrote:
Hiya!
Just a note so that other newbies that read this don't get the idea that
what
you meant was ALL @home uses dhcp b/c they don't. I'm on Cox@home
Let me guess...you have the Cyrix MX 200+ -- notice the +
well the core MHz of the Cyrix is 75 X 2 = 150MHz
This is normal.
The CPU is internally overclocked so that the effective performance is 200
MHz.
HTH
Jaguar
jeff [EMAIL PROTECTED] wrote:
Just installed Mandrake 7.0.2 and it reports my
I believe I already replied to this one...but here it is again...McM's MDK is
version 6.1, with a KNOWN bug in the _KCMCLOCK RPM_, check the archives for
said RPM and follow the threads.
Thx.
Jaguar
Tony Alfrey [EMAIL PROTECTED] wrote:
I posted the following message on the list several days
esn't like the DialPad.COM web site, as I guess Linux Nutscrape is
not supported there. As a side note...has anyone tried and was successful
getting PHONEFREE.COM to work on MDK 7.02?
I have other problems also...but that can wait till I get this one fixed.
?
If not, then bad mic.
If so, then I will tell you about the mixer, the last 3 on kmixer
are "Mix" IGAIN, OGain, be sure that the Mix slider 3rd slider
from right is in the middle, the last 2 you can slide like 3/4 way
up or to your liking.
On Sat, 19 Apr 2036, Jaguar mewed:
Since
however tend to specialise in audio hehe.
On Sun, 20 Apr 2036, Jaguar mewed:
Solved...thx Vic.
I guess I didn't adjust the slides high enuff bfore.:)
Although the MIC response is still low at FULL Gain, it is usable.
Vic [EMAIL PROTECTED] wrote:
Just to let you know your
checked the settings in
DrakXConf. and both seem fine (correct MOD, IRQ/Port) but again...only my
3C509B is listed in Lothar, I know I have 2 NIC's...is this a bug that Lothar
is not displaying the second NIC?
Jaguar
Get your own
the jumper/solder
point. If you are comfy with the adjusting the BIOS settings...go for it...if
not..just change _ONE_ thing at a time and save/restart the PC to check the
result.
HTH
Jaguar
Josh McCaffrey [EMAIL PROTECTED] wrote:
Matthew Loschmann wrote:
What is PNP os and how do I get there. I
No idea why...but MDK 7.02 using the AUTO CONFIGURE will make a single 250 MB
/swap on my 13 GB drive...I only have 64 MB Ram.
So I guess your theory is not entirely true...
Jaguar
"Lothar Mandrake" [EMAIL PROTECTED] wrote:
I have read that a swap space partition cannot be large
Since I am still a newbie here...I use AllAdvantage.com on my Win box. As yet
they have no Ad bar for Linux.
My question is...has anyone tried to set it up useing WINE?
TIA
Jaguar
Get your own FREE, personal Netscape WebMail
Sorry forget the SUBJECT...
Jaguar --- real newbie...:)
Get your own FREE, personal Netscape WebMail account today at
http://webmail.netscape.com.
Since I am still a newbie here...I use AllAdvantage.com on my Win box
Did you take into account shared mem???
128MB-(shared vid mem)=???MB
HTH
Jaguar
Wayne [EMAIL PROTECTED] wrote:
On a related topic, why would my machine only detect 65MB of my RAM when I
have 128 MB? When I did
try to change this manually, my machine crashed during boot.
Wayne
You may have to contact your @Home Tech support to find out the EXACT address
to your mail...mine was just "mail" then I reinstalled at one point and my
mail wouldn't work...now it is *mail."mycity".on.wave.home.com*
HTH
Jaguar
bosco [EMAIL PROTECTED] wrote:
I'm no
will be happier with the
warranty if needed...:)
My $0.02 worth
Jaguar
Dave Casper [EMAIL PROTECTED] wrote:
Ok, I need a new, spelled f-a-s-t-e-r, CD-Rom anyway.
So now is the time when you all get to throw out your
opinions as to who has the best hardware: what CD-Rom
would you recommend?
--- "Mo
dware
list?
Is this a small bug or something?
Small word to MDK personnel...could you replace the NIC setup like it was in
6.0 or maybe have a second window for additionall info?
TIA
Jaguar
Get your own FREE, personal Netscape WebMail acc
---working
Sound @ 0X220 IRQ 5 DMA 1 ---working
They are both listed and working in ifconfig, but not listed in Drakconf as
hardware.
TIA
Jaguar
Lee Williiams [EMAIL PROTECTED] wrote:
-
Attachment:
MIME Type: multipart/alternative
One more thing...if the laptop is NOT Pentium class...Mandrake may not even
install or the performance will be dismal. MDK 6.0 and up is optimized for
Pentium.
HTH
Jaguar
Michael Scottaline [EMAIL PROTECTED] wrote:
"J Michael Graham" [EMAIL PROTECTED] wrote:
Here is the situation:
). For whatever
reason my floppy is initialized during boot up, but fails to mount. I have
tried to boot from ANY (DOS, Win9x, Linux) floppy but no go...my system will
support CD boot though. Is it possible to boot from 6.0 CD and install 7.02
from HD?
TIA
Jaguar
"Michael" [EMAIL PROTEC
On my cable connection once the NIC is setup...I type in the correct IP info
along with correct SYSTEM name...and I do NOT use DHCP...mine works fine...
HTH
Jaguar
Mohammed Bhimji [EMAIL PROTECTED] wrote:
HI,
Thanks Steve, I will try that out.
I have a question now about the internet
It is quite possibly your PIII 500EB processor, I know I had some problems
with it in a Win98SE box. I think it is because the processor is so new that
the architecture is different enuff to cause problems.
IMHO
Jaguar
"Dias Lau" [EMAIL PROTECTED] wrote:
Thanks for your attent
, and when I install my jumpered
C.L. 56K modem...it takes over on my internet connection.
Sorry for my long windedness...:)
HTH
Jaguar
[EMAIL PROTECTED] (Joerg Reinhardt) wrote:
--
[EMAIL PROTECTED]
Doellbachstraße
If it's a dial-up connection...the IP is assigned at connect. I could be
wrong about the free 'Net accounts.
The only difference between your regular dial-up and the free dial-up is the
local phone number you call, and the subsequent IP settings.
HTH
Jaguar
[EMAIL PROTECTED] (Joerg Reinhardt
.
HTH
Jaguar
Alan Shoemaker [EMAIL PROTECTED] wrote:
Samduring the installation of Partition Magic you were
supposed to make a pair of floppies. Disc 1 of that pair is
self booting and asks for disc 2 during the boot process. I
assume that when you were prompted do do this step (making
I have looked at a few different FTP sites and I can't seem to find a site
that has 7.02 clearly marked for d/l?
Is there a site at Linux-Mandrake or somewhere else with the 7.02 version for
d/l? I have a cable modem and want to try 7.02.
TIA
Jaguar
Thanks all...I am currently d/ling from rpmfind...:)
But funny thing is...there is NOT a DIR listed as 7.02, I did check the
VERSION info in a few different ones, and found 7.02 AIR...:)
"Nighthawk" [EMAIL PROTECTED] wrote:
I have looked at a few different FTP sites and I can't seem to find a
--- looks at his keyboard and see's of all things a key labeled "NUM-LOCK"
Ernst-Jan Bach [EMAIL PROTECTED] wrote:
Hi there,
Thannx for the tip but it did'nt work, so I hoipe there maybe is someone
else,
who can tell me how I can set my num lock on in x windows
Thanx
Ernst-Jan
Jeff
I saw a blurb in SlashDOT's site about a distro optimised for ABIT mobo's.
Has anyone tried it yet?
Sorta off topic...:)
Jaguar
Get your own FREE, personal Netscape WebMail account today at
http://webmail.netscape.com.
...:)
Jaguar.
Get your own FREE, personal Netscape WebMail account today at
http://webmail.netscape.com.
...:(
The CD's supported are CDU31, and CDU5X, also Creative/Panasonic, but NONE of
the choices work...I tried AUTOPROBE on all.
Does anyone have some newbieized info for me?
TIA
Jaguar
Get your own FREE, personal Netscape WebMail
At one point I found a HOWTO on Toshiba laptops...maybe do a search of
""toshiba laptops" and "linux"".
HTH
Jaguar
David Michael Felice [EMAIL PROTECTED] wrote:
I am trying to install Mandrake 7 on a Toshiba laptop. It is loading the
begining of the install proc
bably been a culprit of
asking questions in the list when they were already answered in the archives,
but now I scan the archives before asking, and now I know how you guru's
feel.
*Please everybody...check the archives before asking a question.**
my $0.02 wo
I just checked the archives...and the search engine is being rebuilt. I am
looking for that Real Audio URL that was posted a few days ago...could someone
repost please.
TIA
Jaguar
Get your own FREE, personal Netscape WebMail
I just checked the archives...the search engine is down for rebuilding I
guess...could someone report the Real Audio URL please.
TIA
Jaguar
for
whatever reason is NOT using DHCP, and I am sending this from MDK now.
HTH
Jaguar
"J Winkle" [EMAIL PROTECTED] wrote:
Hi All,
I am using a cable modem (Comcast @Home in NJ) to connect to the
internet and can not, for the life of me, figure out how to configure it
(correctly) to ac
I see that KMail can do C.C. to people...but is there a way for it to send
Blind C.C.
TIA
Jaguar
Get your own FREE, personal Netscape WebMail account today at
http://webmail.netscape.com.
versions). I know M$ has been lagging with NEW code, but I guess Uncle Bill
just wants the almighty $$.
I am not now, nor ever have been an M$ employee.
(ducks the flaming M$ coaster, and falls off his soap box:))
my $0.02 worth...:)
Jaguar
Phil Cziao [EMAIL PROTECTED] wrote:
saaa
yours
If I understand correctly...the ENTIRE 700 ie: 700, 701, 702, - 799 series of
Epson printer are considered to be WIN printer's.
CMIIW
Jaguar
"dave" [EMAIL PROTECTED] wrote:
On the topic of the Epson 700 printer - I found one at PCConnection.com,
refurbished, for $99.95. I s
Zoltrix is ONE manufacturer of a RADIO card...I'm sure there are other's...
Alex V Flinsch [EMAIL PROTECTED] wrote:
On Sat, 05 Feb 2000, you wrote:
the only thing I'm trying to get running now is where and how can I find
the app file/driver to run my wintv/radio card...
I truely want to
it...THAT is the correct search
phrase...
HTH
Jaguar
"Alvaro Beckerig" [EMAIL PROTECTED] wrote:
-
Attachment:
MIME Type: multipart/alternative
-
First,
Thanx to Jaguar and George Jones!
release 2
4) Spend $1.99 at a Linux site and get a pro copy of 7.0
HTH
Jaguar
"David Schur" [EMAIL PROTECTED] wrote:
I am just trying to install a new version of it, and it is asking for a
CDROM drive. I know i have an ATAPI drive. its not listed, so i dont have a
clue! I tried all t
Chech the mail archives and search for SIS...I know poeple have had some luck
with that chipset.
Your other problem I believe is a known BUG, you have to uninstall KMCLOCK RPM
---I believe that is right...someone will correct me if I'm wrong. Also
listed in the archives...
HTH
Jaguar
"A
101 - 200 of 255 matches
Mail list logo
