On Monday 12 March 2001 07:53, you wrote:
Dan-
Thank you for the help. However, when I booted from the UDMA5 interface,
LM8 called hda hde and hdb hdf. Since when I configured LM7.2 I called the
What about pre-existing installations? I've got a Pentium 100 that I'm using
now and have 7.2 on
Michael; Mandrake 7.2 doesn't run properly on the ata100 on the ASUS A7V
board just yet. I'm running that board on this system. 8.0 may support
it, but since it's still a Beta product, don't expect it to run properly
yet. Use the standard IDE interfaces for now. Apparently there is a way
to
Hi Dan,
Kindly advise :
Use the standard IDE interfaces for now. Apparently there is a way to
make it work on 7.2 but even so it's still "buggy".
Is it using IDE cable for ATA33/ATA66 to connect the ATA100 hard disc first
before installation ?
Try installing your O/S using the stabdard
ROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, March 12, 2001 5:23 AM
Subject: Re: [newbie] can 't install on ASUS A7V133
Michael; Mandrake 7.2 doesn't run properly on the ata100 on the ASUS A7V
board just yet. I'm running that board on this system. 8.0 may support
it, but since it's still a Beta p
Forever never goes beyond tomorrow.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Stephen Liu
Sent: Monday, March 12, 2001 7:48 AM
To: [EMAIL PROTECTED]
Cc: Dan LaBine
Subject: Re: [newbie] can 't install on ASUS A7V133
Hi Dan,
Kindly
If anyone is interested in how to make this work visit:
http://forum.mandrakesoft.com/article.php3?sid=20001201075945
Stephen Liu wrote:
Hi Dan,
Kindly advise :
Use the standard IDE interfaces for now. Apparently there is a way to
make it work on 7.2 but even so it's still "buggy".
On Monday 12 March 2001 04:48, you proffered:
Hi Dan,
Kindly advise :
Use the standard IDE interfaces for now. Apparently there is a way to
make it work on 7.2 but even so it's still "buggy".
Is it using IDE cable for ATA33/ATA66 to connect the ATA100 hard disc first
before
: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of michael
Sent: Sunday, March 11, 2001 9:29 PM
To: [EMAIL PROTECTED]
Subject: [newbie] can 't install on ASUS A7V133
With primary ata100 cable connected to both hd's 7.2 won't install, and
8.0 only gets half way thru the second disk. Does anyone
On Monday 12 March 2001 09:09, you proffered:
Here is the page I used to get it setup. So far everything is working like
it should; no bugs so far.
http://www.mandrakeuser.org/hardware/hbits5.html
I also installed 8.0 and it made it all the way through. Think it might be
your disk? Just a
With primary ata100 cable connected to both hd's 7.2 won't install, and
8.0 only gets half way thru the second disk. Does anyone have any
experience with this board?
10 matches
Mail list logo