On 5/5/07, Doug Parsons [EMAIL PROTECTED] wrote:
Running into a little problem. I have several UPS units connected to one
server. Then several servers talk to this server. All of this is working.
When I try to set a setting with the setting.cgi page I get an access
denied. Which credential does
On 5/7/07, Tom Laermans [EMAIL PROTECTED] wrote:
I have not tried Windows with PowerChute yet to see if it is reported
corretly there; other values in the UPS data seem to be correct and
valid.
It's always good to check and see if it's coming across correctly -
each value in newhidups
Don't know. You could run the driver with -DD to see the raw data
reported by the UPS. -- Peter
Tom Laermans wrote:
'lo,
UPS model: APC Back-UPS BR 800 (supplied by Dell)
My USB connection:
Bus 001 Device 002: ID 051d:0002 American Power Conversion Back-UPS Pro
500/1000/1500
#
On 5/7/07, Doug Parsons [EMAIL PROTECTED] wrote:
Network UPS Tools upsset 2.0.4
set input.transfer.high to 130 (was 127)
Error: SET failed: Access denied
No settings changed.
What about the webserver error log?
Have you checked the man page for upsset.conf?
Can you try on the command line
4 matches
Mail list logo
