On 9/13/07, Alexander Fradiani <[EMAIL PROTECTED]> wrote: > > > If it also has serial port, it should be supported by "megatec". If it > > is USB only, you may try "megatec_usb" to see if it works. > > thanks for the answer, just two more questions > i´ve been searching for the "megatec_usb" driver, but can't find it yet. > where should i get it.
The "megatec_usb" driver was introduced in NUT 2.2.0 (the current stable release). > using the "megatec", i get the following: > tcgetattr(/dev/bus/usb/002/012): Inappropriate ioctl > for device > is that because of the driver, or am i trying to connect to the wrong port > (the only way i know to identify the port is using the lsusb command). "megatec" can only drive UPSes connected through the serial port, not USB (unless your UPS has a true USB-to-serial converter, which I very much doubt it, and gets assigned a "/dev/ttyUSBx" device by the kernel). The Winpower software speaks the megatec protocol, so "megatec_usb" is your best shot. If it doesn't work, maybe its maintainers can help modifying it in order to work. -- Carlos Rodrigues _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser