Re: [Nut-upsuser] Slaves under Squeeze

2011-09-14 Thread Charles Lepple
On Sep 14, 2011, at 9:19 PM, Rob Donovan wrote: Changing to the following on the server : upsd.conf: LISTEN 127.0.0.1 LISTEN 192.168.1.102 also works :) :-) The typical application for listening on just a subset of the interfaces is on a gateway machine, where you want to allow access f

Re: [Nut-upsuser] Slaves under Squeeze

2011-09-14 Thread Rob Donovan
Changing to the following on the server : upsd.conf: LISTEN 127.0.0.1 LISTEN 192.168.1.102 also works :) ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser

Re: [Nut-upsuser] Slaves under Squeeze

2011-09-14 Thread Rob Donovan
Thanks - that brought me more progress than I've seen all day :) Changing to the following on the server : upsd.conf: LISTEN 0.0.0.0 with no other changes from what I posted on the previous page got both the server and slave nuts starting up ok. For the record ifconfig on the server return

Re: [Nut-upsuser] Slaves under Squeeze

2011-09-14 Thread Charles Lepple
On Wed, Sep 14, 2011 at 7:57 PM, Rob Donovan wrote: > hi, >    I recently upgraded my Debian Lenny system to Squeeze, and have been > happily running nut as a MODE=standalone system talking to my Cyberpower > 1500 avr lcd via the usbhid-ups driver for a couple of weeks or so.  No > problems. > >  

Re: [Nut-upsuser] driver error

2011-09-14 Thread Steve Boyle
Cool, thanks for the tip. Most appreciated. Regards, Steve -Original Message- From: Charles Lepple [mailto:clep...@gmail.com] Sent: Wednesday, September 14, 2011 5:07 PM To: Steve Boyle Cc: nut-upsuser@lists.alioth.debian.org Subject: Re: [Nut-upsuser] driver error On Wed, Sep 14, 2011

Re: [Nut-upsuser] driver error

2011-09-14 Thread Charles Lepple
On Wed, Sep 14, 2011 at 7:53 PM, Steve Boyle wrote: > Hi, > > > > Actually, I just got it working.  I found this thread: > > http://comments.gmane.org/gmane.comp.monitoring.nut.user/6546 > > > > I downloaded the 2.6.1 source and found the entry I needed to add to > 52-nut-usbups.rules.  I also had

[Nut-upsuser] Slaves under Squeeze

2011-09-14 Thread Rob Donovan
hi, I recently upgraded my Debian Lenny system to Squeeze, and have been happily running nut as a MODE=standalone system talking to my Cyberpower 1500 avr lcd via the usbhid-ups driver for a couple of weeks or so. No problems. Now I'm trying to hang another machine off the same ups as

Re: [Nut-upsuser] driver error

2011-09-14 Thread Steve Boyle
Hi, Actually, I just got it working. I found this thread: http://comments.gmane.org/gmane.comp.monitoring.nut.user/6546 I downloaded the 2.6.1 source and found the entry I needed to add to 52-nut-usbups.rules. I also had to add productid = 0003 to the ups.conf file. Seems to be working now.

Re: [Nut-upsuser] driver error

2011-09-14 Thread Charles Lepple
On Sep 14, 2011, at 6:03 PM, Steve Boyle wrote: Hi, I’m trying to install NUT on Ubuntu. All is good until I try to start the driver, then I get this error: $ sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communi

[Nut-upsuser] driver error

2011-09-14 Thread Steve Boyle
Hi, I'm trying to install NUT on Ubuntu. All is good until I try to start the driver, then I get this error: $ sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 This APC device (051d:0003) is not