Massimiliano Giorgi wrote:
when genericups start it write
parse_output_signals: SD overriden with ST
so I suppose that this setting was in use but (you are right) probably
is inefective
The above line was executed in the wrong place. We never get there when
commanding the UPS to
Arjen de Korte wrote:
I have discovered that if you build a custom cable you can use the
genericups driver (tha cable supplied with the UPS does not work)...
How is that one wired?
the cable supplied with the UPS is a normal modem (DTE-DCE, DB9 male-DB9
female, pin-to-pin connected)
Arjen de Korte wrote:
I have a Riello Dialog Plus UPS...
someone knows how to configure nut for this UPS?
[...]
All messages start with a STX and end with a ETX; all the messages
from the application start with a STX SPACE ! and the response
from the UPS with a STX ! SPACE
It doesn't
I have discovered that if you build a custom cable you can use the
genericups driver (tha cable supplied with the UPS does not work)...
How is that one wired?
I have build a normal RS232 DTE-DCE cable (I have connected pin 1 with
pin 1, pin 2 with pin 2, and so on... using two DB-9
I have a Riello Dialog Plus UPS...
someone knows how to configure nut for this UPS?
[...]
All messages start with a STX and end with a ETX; all the messages
from the application start with a STX SPACE ! and the response
from the UPS with a STX ! SPACE
It doesn't look like anything
I have a Riello Dialog Plus UPS...
someone knows how to configure nut for this UPS?
I have tried the bestups, fentonups and sec driver without result... ( I
have tried others driver too...)
I have tried the genericups but it does not work...
This UPS have a RS232 port and seems not to be a contact
6 matches
Mail list logo
