Does your system have the drivers loaded for the converter? If your system
can see the USB device AND the serial port then NUT needs a serial driver.
Most likely, this works fine. Otherwise the megatec driver would be
complaining about not being able to open the port. So most likely, either
Citeren Douglas Parsons d...@parsonsemail.com:
So just for my understanding, the NUT ups driver doesn't care if the USB to
serial converter is built into the ups or an external unit?
Indeed. The only thing that is important is whether or not the USB to
serial converter is supported by the
I have two SMS PowerVision PV2200 BIFX, that came with a serial port, I
used
a serial - usb conversor to conect it to my pc
Hello,
According to the driver you are trying to use a USB driver on a serial port
system. Not sure if the NUT drivers support this.
Does your system have the
Hello,
I have two SMS PowerVision PV2200 BIFX, that came with a serial port, I used
a serial - usb conversor to conect it to my pc
it recognized as:
lsusb -s 001:005 -vvv
Bus 001 Device 005: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial
Port
Device Descriptor:
bLength
Citeren Wagner wagner...@gmail.com:
Network UPS Tools 2.2.2 - Megatec protocol driver 1.5.14 [megatec]
Carlos Rodrigues (c) 2003-2008
debug level is '6'
Starting UPS detection process...
Asking for UPS status [Q1]...
Q1 = FAILED [timeout]
Asking for UPS status [Q1]...
Q1 = FAILED [timeout]
5 matches
Mail list logo
