Scrive Arjen de Korte nut+us...@de-korte.org:
Citeren ricman ric...@neomedia.it:
here are a couple of logs: log 1 and 2 are pretty similar and command
stopped
after a couple of seconds saying No supported UPS detected; log 3
went on for about 30 seconds and i stopped it using
Hi ricman,
8snip
send: D
read: timeout
blazer_status: short reply
Status read 3 failed
No supported UPS detected
Network UPS Tools - Megatec/Q1 protocol serial driver 1.51 (2.4.1)
where am i wrong?
1. Your ups.conf ?
2. What command did
One suggestion would to be to determine if the serial port is working and
what it is named without Nut involved. Use a terminal program and a loopback
or some known device to test and confirm the port. There are several cases
in the archives that talk about testing serial ports as well as Google.
Scrive Kjell Claesson kjell.claes...@epost.tidanet.se:
Hi ricman,
8snip
send: D
read: timeout
blazer_status: short reply
Status read 3 failed
No supported UPS detected
Network UPS Tools - Megatec/Q1 protocol serial driver 1.51
Scrive Douglas Parsons d...@parsonsemail.com:
One suggestion would to be to determine if the serial port is working and
what it is named without Nut involved. Use a terminal program and a loopback
or some known device to test and confirm the port. There are several cases
in the archives that
On Thu, Mar 18, 2010 at 6:38 PM, ricman ric...@neomedia.it wrote:
Scrive Douglas Parsons d...@parsonsemail.com:
One suggestion would to be to determine if the serial port is working and
what it is named without Nut involved. Use a terminal program and a loopback
or some known device to test
Citeren ricman ric...@neomedia.it:
here are a couple of logs: log 1 and 2 are pretty similar and command stopped
after a couple of seconds saying No supported UPS detected; log 3
went on for about 30 seconds and i stopped it using control+c
Your UPS can't make up its little mind what it
Scrive Arjen de Korte nut+us...@de-korte.org:
Citeren ricman ric...@neomedia.it:
here are a couple of logs: log 1 and 2 are pretty similar and command
stopped
after a couple of seconds saying No supported UPS detected; log 3
went on for about 30 seconds and i stopped it using
Scrive Arjen de Korte nut+us...@de-korte.org:
Citeren ricman ric...@neomedia.it:
same issue (both terminal and log)
Mar 14 22:48:13 maialinux blazer_usb[2638]: Communications with UPS
lost: status
read failed!
Mar 14 22:48:16 maialinux blazer_usb[2638]: Communications with UPS
Citeren ricman ric...@neomedia.it:
i think maybe it's the second one since upsc shows
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: JP00097G
ups.load: 10
ups.mfg:
ups.model:
ups.productid:
ups.status: OL
ups.temperature: 30.0
ups.type: offline / line interactive
ups.vendorid:
Scrive Arjen de Korte nut+us...@de-korte.org:
Citeren ricman ric...@neomedia.it:
i think maybe it's the second one since upsc shows
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: JP00097G
ups.load: 10
ups.mfg:
ups.model:
ups.productid:
ups.status: OL
В Sun, 14 Mar 2010 03:00:33 +0100
ric...@neomedia.it пишет:
ups: atlantis-land HostPower Sinewave Line Interactive 1501 A03-HP1501
distro: ubuntustudio 9.10
nut: 2.4.1
driver: megatec_usb
using upsc i can get ups value (voltage, battery, etc) but on terminal i get
lots and lots of
Scrive Alexander Gordeev lasa...@lvk.cs.msu.su:
Ð Sun, 14 Mar 2010 03:00:33 +0100
ric...@neomedia.it пиÑеÑ:
ups: atlantis-land HostPower Sinewave Line Interactive 1501 A03-HP1501
distro: ubuntustudio 9.10
nut: 2.4.1
driver: megatec_usb
using upsc i can get ups value
ups: atlantis-land HostPower Sinewave Line Interactive 1501 A03-HP1501
distro: ubuntustudio 9.10
nut: 2.4.1
driver: megatec_usb
using upsc i can get ups value (voltage, battery, etc) but on terminal i get
lots and lots of these messages:
14 matches
Mail list logo
