salut Philippe,
2006/3/31, Philippe Marzouk:
Hi,
I just got at work an MGE UPS Comet EX RT 7 and I can communicate fine
with it through mge-shut, it detects correctly when on battery.
I am using Nut 2.0.3 on Linux (RHEL 3).
I am trying to simulate a low battery condition to test my
Hi Patrick,
2006/4/2, Patrick Beard [EMAIL PROTECTED]:
Hi Arnaud,
Just wanted to let you know the the Belkin F6H500ukUNV is working for me
with the fentonups driver.
http://catalog.belkin.com/IWCatSectionView.process?IWAction=LoadMerchant_Id=Section_Id=202840
I originally tried it with
I tested it by pulling the supply to the ups. It got the 'on and then
the 'low battery' upsmon then shutdown my system. The ups however
remained on.
the ups shutoff (hardware ups shutdown) seems not to be working.
Carlos might have more ideas on the cause...
This might not be a bug - it
Hi all,
I would like to know how to monitor an ups connected to linux server (usb).
I explain : I have a nut-srv connected with 2 serial ups and 2 linux
nut-client. I don't have any usb port on the nut-srv. So I would like to
connect usb ups on a other machine just to have the state (load,
On 4/3/06, Olivier MOULIN [EMAIL PROTECTED] wrote:
Hi all,
I would like to know how to monitor an ups connected to linux server (usb).
I explain : I have a nut-srv connected with 2 serial ups and 2 linux
nut-client. I don't have any usb port on the nut-srv. So I would like to
connect usb
The UPS didn't turn off, but did you try to wait a while? powermust
turns off the UPS immediately, but I'm not sure about fentonups now.
Some drivers wait a minute before turning the UPS off.
On 4/3/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I tested it by pulling the supply to the ups. It
On 4/3/06, Arnaud Quette [EMAIL PROTECTED] wrote:
The Belkin is connected using the serial cable but this is through a
usb/serial convertor. so the port is /dev/ttyUSB0
The fentonups driver identifies the Belkin as 'BELKIN PowerPure
aster' (Not a mis-type it is 'aster')
probably a
Another option that could be used is an Ethernet to Serial converter. It
creates virtual devices that acts just like serial ports but can be
connected to ups units located anywhere on the network. My application is to
use them for ups units on switches and having one server talk to all the ups
8 matches
Mail list logo