[Nut-upsuser] Old APC SmartUPS 1250, Nut 2.2.2 Fedora 9

Hi All, I've got two APC SmartUPS's that behave differently with nut, I have a SmartUPS1400 a SmartUPS1250. I'm fairly sure this isn't a nut problem but more likely a problem with the age of the SmartUPS1250 and the apcsmart driver not being able to identify it. Under the APC Powerchute

Re: [Nut-upsuser] Cyberpower Value 600E UPS (unlisted) working

Hi Thomas, Le mercredi 02 juillet 2008 à 18:52 +0200, Thomas Backman a écrit : Hey! I just bought my first UPS, a Cyberpower Value 600E, and set it up using NUT 2.2.x (on Gentoo x86_64). Everything is working great, using the usbhid-ups driver, and the UPS isn't on the compatibility

[Nut-upsuser] NUT with PowerWalker vi 400 se (usb).

Hi. I'm from Russia. I try to use NUT with PowerWalker vi 400 se (usb). I use FreeBSD 7.0 (amd64) and megatec_usb driver. Settingup the NUT with FreeBSD installation procedure (Thierry Thomas, from FreeBSD). PowerWalker connect to the computer by usb cable on port usb0 (uhib0). NUT don't

Re: [Nut-upsuser] NUT with PowerWalker vi 400 se (usb).

On Thu, Jul 3, 2008 at 12:27 PM, Никита Шишков [EMAIL PROTECTED] wrote: Hi. I'm from Russia. I try to use NUT with PowerWalker vi 400 se (usb). I use FreeBSD 7.0 (amd64) and megatec_usb driver. Settingup the NUT with FreeBSD installation procedure (Thierry Thomas, from FreeBSD). Can you

Re: [Nut-upsuser] megatec driver floods syslog with UPS lost/re-established messages

On Thu, Jul 3, 2008 at 10:57 PM, Anton Martchukov [EMAIL PROTECTED] wrote: 1) megatac driver is able to load and detect UPS only on second or third run. On the first run it typically fails. Later if daemon is being stoped and started again it's more likely to fail after restart too, but on the